1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
|
From d32795d2be55748552ddacd9b1e47efc61264a98 Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.org>
Date: Mon, 8 Feb 2016 12:53:44 +0000
Subject: [PATCH 146/170] FIXUP: Overlay README - Restore spaces deleted in
error
---
arch/arm/boot/dts/overlays/README | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/arch/arm/boot/dts/overlays/README
+++ b/arch/arm/boot/dts/overlays/README
@@ -550,7 +550,7 @@ Info: Configures a single PWM channel
Pins 12 and 13 might be better choices on an A+, B+ or Pi2.
2) The onboard analogue audio output uses both PWM channels.
3) So be careful mixing audio and PWM.
- 4) Currently the clockmust have been enabled and configured
+ 4) Currently the clock must have been enabled and configured
by other means.
Load: dtoverlay=pwm,<param>=<val>
Params: pin Output pin (default 18) - see table
@@ -569,7 +569,7 @@ Info: Configures both PWM channels
Pins 12 and 13 might be better choices on an A+, B+ or Pi2.
2) The onboard analogue audio output uses both PWM channels.
3) So be careful mixing audio and PWM.
- 4) Currently the clockmust have been enabled and configured
+ 4) Currently the clock must have been enabled and configured
by other means.
Load: dtoverlay=pwm-2chan,<param>=<val>
Params: pin Output pin (default 18) - see table
@@ -753,7 +753,7 @@ Params: <None>
Name: vga666
Info: Overlay for the Fen Logic VGA666 board
- This uses GPIOs 2-21 (sono I2C), and activates the output 2-3 seconds
+ This uses GPIOs 2-21 (so no I2C), and activates the output 2-3 seconds
after the kernel has started.
Load: dtoverlay=vga666
Params: <None>
|
