1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
|
From a1a297d0fd4b5ec427be523ed73afc5762f83595 Mon Sep 17 00:00:00 2001
From: Dave Stevenson <dave.stevenson@raspberrypi.org>
Date: Thu, 30 May 2019 13:56:15 +0100
Subject: [PATCH 623/725] drm/vc4: fkms to query the VPU for HDMI clock limits
The VPU has configured clocks for 4k (or not) via config.txt,
and will limit the choice of video modes based on that.
Make fkms query it for these limits too to avoid selecting modes
that can not be handled by the current clock setup.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
---
drivers/gpu/drm/vc4/vc4_drv.h | 1 +
drivers/gpu/drm/vc4/vc4_firmware_kms.c | 48 ++++++++++++++++++++++
include/soc/bcm2835/raspberrypi-firmware.h | 1 +
3 files changed, 50 insertions(+)
--- a/drivers/gpu/drm/vc4/vc4_drv.h
+++ b/drivers/gpu/drm/vc4/vc4_drv.h
@@ -77,6 +77,7 @@ struct vc4_dev {
struct vc4_dsi *dsi1;
struct vc4_vec *vec;
struct vc4_txp *txp;
+ struct vc4_fkms *fkms;
struct vc4_hang_state *hang_state;
--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c
+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c
@@ -29,6 +29,14 @@
#include "vc_image_types.h"
#include <soc/bcm2835/raspberrypi-firmware.h>
+struct get_display_cfg {
+ u32 max_pixel_clock[2]; //Max pixel clock for each display
+};
+
+struct vc4_fkms {
+ struct get_display_cfg cfg;
+};
+
#define PLANES_PER_CRTC 3
struct set_plane {
@@ -794,6 +802,11 @@ static void vc4_crtc_enable(struct drm_c
static enum drm_mode_status
vc4_crtc_mode_valid(struct drm_crtc *crtc, const struct drm_display_mode *mode)
{
+ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
+ struct drm_device *dev = crtc->dev;
+ struct vc4_dev *vc4 = to_vc4_dev(dev);
+ struct vc4_fkms *fkms = vc4->fkms;
+
/* Do not allow doublescan modes from user space */
if (mode->flags & DRM_MODE_FLAG_DBLSCAN) {
DRM_DEBUG_KMS("[CRTC:%d] Doublescan mode rejected.\n",
@@ -801,6 +814,22 @@ vc4_crtc_mode_valid(struct drm_crtc *crt
return MODE_NO_DBLESCAN;
}
+ /* Limit the pixel clock based on the HDMI clock limits from the
+ * firmware
+ */
+ switch (vc4_crtc->display_number) {
+ case 2: /* HDMI0 */
+ if (fkms->cfg.max_pixel_clock[0] &&
+ mode->clock > fkms->cfg.max_pixel_clock[0])
+ return MODE_CLOCK_HIGH;
+ break;
+ case 7: /* HDMI1 */
+ if (fkms->cfg.max_pixel_clock[1] &&
+ mode->clock > fkms->cfg.max_pixel_clock[1])
+ return MODE_CLOCK_HIGH;
+ break;
+ }
+
/* Limit the pixel clock until we can get dynamic HDMI 2.0 scrambling
* working.
*/
@@ -1301,11 +1330,16 @@ static int vc4_fkms_bind(struct device *
struct device_node *firmware_node;
struct vc4_crtc **crtc_list;
u32 num_displays, display_num;
+ struct vc4_fkms *fkms;
int ret;
u32 display_id;
vc4->firmware_kms = true;
+ fkms = devm_kzalloc(dev, sizeof(*fkms), GFP_KERNEL);
+ if (!fkms)
+ return -ENOMEM;
+
/* firmware kms doesn't have precise a scanoutpos implementation, so
* we can't do the precise vblank timestamp mode.
*/
@@ -1334,6 +1368,18 @@ static int vc4_fkms_bind(struct device *
ret = 0;
}
+ ret = rpi_firmware_property(vc4->firmware,
+ RPI_FIRMWARE_GET_DISPLAY_CFG,
+ &fkms->cfg, sizeof(fkms->cfg));
+
+ if (ret)
+ return -EINVAL;
+ /* The firmware works in Hz. This will be compared against kHz, so div
+ * 1000 now rather than multiple times later.
+ */
+ fkms->cfg.max_pixel_clock[0] /= 1000;
+ fkms->cfg.max_pixel_clock[1] /= 1000;
+
/* Allocate a list, with space for a NULL on the end */
crtc_list = devm_kzalloc(dev, sizeof(crtc_list) * (num_displays + 1),
GFP_KERNEL);
@@ -1375,6 +1421,8 @@ static int vc4_fkms_bind(struct device *
DRM_WARN("No displays found. Consider forcing hotplug if HDMI is attached\n");
}
+ vc4->fkms = fkms;
+
platform_set_drvdata(pdev, crtc_list);
return 0;
--- a/include/soc/bcm2835/raspberrypi-firmware.h
+++ b/include/soc/bcm2835/raspberrypi-firmware.h
@@ -153,6 +153,7 @@ enum rpi_firmware_property_tag {
RPI_FIRMWARE_SET_PLANE = 0x00048015,
RPI_FIRMWARE_GET_DISPLAY_TIMING = 0x00040017,
RPI_FIRMWARE_SET_TIMING = 0x00048017,
+ RPI_FIRMWARE_GET_DISPLAY_CFG = 0x00040018,
RPI_FIRMWARE_GET_COMMAND_LINE = 0x00050001,
RPI_FIRMWARE_GET_DMA_CHANNELS = 0x00060001,
|
