1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
|
From cbda8e6de54f8a0f194e990f53e1cfad642af1be Mon Sep 17 00:00:00 2001
From: Chris Miller <chris@mesl2.co.uk>
Date: Wed, 26 Jun 2019 10:40:30 +0100
Subject: [PATCH] drm: vc4_dsi: Fix DMA channel and memory leak in vc4
(#3012)
Signed-off-by: Chris G Miller <chris@creative-electronics.net>
---
drivers/gpu/drm/vc4/vc4_dsi.c | 35 ++++++++++++++++++++++++-----------
1 file changed, 24 insertions(+), 11 deletions(-)
--- a/drivers/gpu/drm/vc4/vc4_dsi.c
+++ b/drivers/gpu/drm/vc4/vc4_dsi.c
@@ -1485,9 +1485,11 @@ static int vc4_dsi_bind(struct device *d
/* DSI1 has a broken AXI slave that doesn't respond to writes
* from the ARM. It does handle writes from the DMA engine,
* so set up a channel for talking to it.
+ * Where possible managed resource providers are used, but the DMA channel
+ * must - if acquired - be explicitly released prior to taking an error exit path.
*/
if (dsi->port == 1) {
- dsi->reg_dma_mem = dma_alloc_coherent(dev, 4,
+ dsi->reg_dma_mem = dmam_alloc_coherent(dev, 4,
&dsi->reg_dma_paddr,
GFP_KERNEL);
if (!dsi->reg_dma_mem) {
@@ -1506,6 +1508,8 @@ static int vc4_dsi_bind(struct device *d
return ret;
}
+ /* From here on, any error exits must release the dma channel */
+
/* Get the physical address of the device's registers. The
* struct resource for the regs gives us the bus address
* instead.
@@ -1532,7 +1536,7 @@ static int vc4_dsi_bind(struct device *d
if (ret) {
if (ret != -EPROBE_DEFER)
dev_err(dev, "Failed to get interrupt: %d\n", ret);
- return ret;
+ goto rel_dma_exit;
}
dsi->escape_clock = devm_clk_get(dev, "escape");
@@ -1540,7 +1544,7 @@ static int vc4_dsi_bind(struct device *d
ret = PTR_ERR(dsi->escape_clock);
if (ret != -EPROBE_DEFER)
dev_err(dev, "Failed to get escape clock: %d\n", ret);
- return ret;
+ goto rel_dma_exit;
}
dsi->pll_phy_clock = devm_clk_get(dev, "phy");
@@ -1548,7 +1552,7 @@ static int vc4_dsi_bind(struct device *d
ret = PTR_ERR(dsi->pll_phy_clock);
if (ret != -EPROBE_DEFER)
dev_err(dev, "Failed to get phy clock: %d\n", ret);
- return ret;
+ goto rel_dma_exit;
}
dsi->pixel_clock = devm_clk_get(dev, "pixel");
@@ -1556,7 +1560,7 @@ static int vc4_dsi_bind(struct device *d
ret = PTR_ERR(dsi->pixel_clock);
if (ret != -EPROBE_DEFER)
dev_err(dev, "Failed to get pixel clock: %d\n", ret);
- return ret;
+ goto rel_dma_exit;
}
ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0,
@@ -1571,26 +1575,28 @@ static int vc4_dsi_bind(struct device *d
if (ret == -ENODEV)
return 0;
- return ret;
+ goto rel_dma_exit;
}
if (panel) {
dsi->bridge = devm_drm_panel_bridge_add(dev, panel,
DRM_MODE_CONNECTOR_DSI);
- if (IS_ERR(dsi->bridge))
- return PTR_ERR(dsi->bridge);
+ if (IS_ERR(dsi->bridge)){
+ ret = PTR_ERR(dsi->bridge);
+ goto rel_dma_exit;
+ }
}
/* The esc clock rate is supposed to always be 100Mhz. */
ret = clk_set_rate(dsi->escape_clock, 100 * 1000000);
if (ret) {
dev_err(dev, "Failed to set esc clock: %d\n", ret);
- return ret;
+ goto rel_dma_exit;
}
ret = vc4_dsi_init_phy_clocks(dsi);
if (ret)
- return ret;
+ goto rel_dma_exit;
if (dsi->port == 1)
vc4->dsi1 = dsi;
@@ -1602,7 +1608,7 @@ static int vc4_dsi_bind(struct device *d
ret = drm_bridge_attach(dsi->encoder, dsi->bridge, NULL);
if (ret) {
dev_err(dev, "bridge attach failed: %d\n", ret);
- return ret;
+ goto rel_dma_exit;
}
/* Disable the atomic helper calls into the bridge. We
* manually call the bridge pre_enable / enable / etc. calls
@@ -1619,6 +1625,11 @@ static int vc4_dsi_bind(struct device *d
pm_runtime_enable(dev);
return 0;
+
+rel_dma_exit:
+ dma_release_channel(dsi->reg_dma_chan);
+
+ return ret;
}
static void vc4_dsi_unbind(struct device *dev, struct device *master,
@@ -1633,6 +1644,8 @@ static void vc4_dsi_unbind(struct device
vc4_dsi_encoder_destroy(dsi->encoder);
+ dma_release_channel(dsi->reg_dma_chan);
+
if (dsi->port == 1)
vc4->dsi1 = NULL;
}
|
