1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
|
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qca955x.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "Sitecom WLR-8100 (X8 AC1750)";
compatible = "sitecom,wlr-8100", "qca,qca9558";
aliases {
led-boot = &led_status_amber;
led-failsafe = &led_status_amber;
led-running = &led_status_amber;
led-upgrade = &led_status_amber;
};
keys {
compatible = "gpio-keys";
wifi2g_rfkill {
label = "2.4GHz - RFKILL";
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
wifi5g_restart {
label = "5GHz - RESTART";
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
leds {
compatible = "gpio-leds";
led_status_amber: status_amber {
label = "wlr-8100:amber:status";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
default-state = "on";
};
ops {
label = "wlr-8100:white:ops";
gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
};
wifi2g {
label = "wlr-8100:blue:wifi2g";
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
wifi5g {
label = "wlr-8100:blue:wifi5g";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
};
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x030000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x030000 0x010000>;
read-only;
};
partition@40000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x040000 0xf10000>;
};
partition@f50000 {
label = "manufacture";
reg = <0xf50000 0x040000>;
read-only;
};
partition@f90000 {
label = "backup";
reg = <0xf90000 0x010000>;
read-only;
};
partition@fa0000 {
label = "storage";
reg = <0xfa0000 0x050000>;
read-only;
};
art: partition@ff0000 {
label = "art";
reg = <0xff0000 0x010000>;
read-only;
};
};
};
};
&pcie0 {
status = "okay";
};
&pcie1 {
status = "okay";
wifi@0,0 {
compatible = "qcom,ath10k";
reg = <0 0 0 0 0>;
};
};
&uart {
status = "okay";
};
&usb_phy0 {
status = "okay";
};
&usb0 {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
};
&mdio0 {
status = "okay";
phy0: ethernet-phy@0 {
reg = <0>;
qca,ar8327-initvals = <
0x04 0x87600000 /* PORT0 PAD MODE CTRL */
0x50 0xc437c437 /* LED Control Register 0 */
0x54 0xc337c337 /* LED Control Register 1 */
0x58 0x00000000 /* LED Control Register 2 */
0x5c 0x03ffff00 /* LED Control Register 3 */
0x7c 0x0000007e /* PORT0_STATUS */
>;
};
};
ð0 {
status = "okay";
phy-handle = <&phy0>;
pll-data = <0xa6000000 0x00000101 0x00001616>;
gmac-config {
device = <&gmac>;
rgmii-enabled = <1>;
};
};
&wmac {
status = "okay";
qca,no-eeprom;
};
|
