1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
|
--- linux-2.6.21.1.orig/drivers/serial/atmel_serial.c 2007-05-28 12:22:29.000000000 +0200
+++ linux-2.6.21.1/drivers/serial/atmel_serial.c 2007-05-28 16:39:09.000000000 +0200
@@ -174,7 +174,35 @@
at91_set_gpio_value(AT91_PIN_PA21, 0);
else
at91_set_gpio_value(AT91_PIN_PA21, 1);
+
+ /*
+ * FDL VersaLink adds GPIOS to provide full modem control on
+ * USART 0 - Drive DTR and RI pins manually
+ */
+ if (mctrl & TIOCM_DTR)
+ at91_set_gpio_value(AT91_PIN_PB6, 0);
+ else
+ at91_set_gpio_value(AT91_PIN_PB6, 1);
+ if (mctrl & TIOCM_RI)
+ at91_set_gpio_value(AT91_PIN_PB7, 0);
+ else
+ at91_set_gpio_value(AT91_PIN_PB7, 1);
}
+
+ /*
+ * FDL VersaLink adds GPIOS to provide full modem control on
+ * USART 3 - Drive DTR and RI pins manually
+ */
+ if (port->mapbase == AT91RM9200_BASE_US3) {
+ if (mctrl & TIOCM_DTR)
+ at91_set_gpio_value(AT91_PIN_PB29, 0);
+ else
+ at91_set_gpio_value(AT91_PIN_PB29, 1);
+ if (mctrl & TIOCM_RI)
+ at91_set_gpio_value(AT91_PIN_PB2, 0);
+ else
+ at91_set_gpio_value(AT91_PIN_PB2, 1);
+ }
}
#endif
@@ -211,8 +239,10 @@
/*
* The control signals are active low.
*/
- if (!(status & ATMEL_US_DCD))
- ret |= TIOCM_CD;
+
+ if (!(port->mapbase == AT91RM9200_BASE_US0 || port->mapbase == AT91RM9200_BASE_US3))
+ if (!(status & ATMEL_US_DCD))
+ ret |= TIOCM_CD;
if (!(status & ATMEL_US_CTS))
ret |= TIOCM_CTS;
if (!(status & ATMEL_US_DSR))
@@ -220,6 +250,16 @@
if (!(status & ATMEL_US_RI))
ret |= TIOCM_RI;
+ /*
+ * Read the GPIO's for the FDL VersaLink special case
+ */
+ if (port->mapbase == AT91RM9200_BASE_US0)
+ if (!(at91_get_gpio_value(AT91_PIN_PA19)))
+ ret |= TIOCM_CD;
+ if (port->mapbase == AT91RM9200_BASE_US3)
+ if (!(at91_get_gpio_value(AT91_PIN_PA24)))
+ ret |= TIOCM_CD;
+
return ret;
}
@@ -511,6 +551,34 @@
}
/*
+ * USART0 DCD Interrupt handler
+ */
+
+static irqreturn_t atmel_u0_DCD_interrupt(int irq, void *dev_id)
+{
+ struct uart_port *port = dev_id;
+ int status = at91_get_gpio_value(irq);
+
+ uart_handle_dcd_change(port, !(status));
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * USART3 DCD Interrupt handler
+ */
+
+static irqreturn_t atmel_u3_DCD_interrupt(int irq, void *dev_id)
+{
+ struct uart_port *port = dev_id;
+ int status = at91_get_gpio_value(irq);
+
+ uart_handle_dcd_change(port, !(status));
+
+ return IRQ_HANDLED;
+}
+
+/*
* Interrupt handler
*/
static irqreturn_t atmel_interrupt(int irq, void *dev_id)
@@ -587,6 +655,23 @@
return retval;
}
+ if (port->mapbase == AT91RM9200_BASE_US0) {
+ retval = request_irq(AT91_PIN_PA19, atmel_u0_DCD_interrupt, 0, "atmel_serial", port);
+ if (retval) {
+ printk("atmel_serial: atmel_startup - Can't get u0DCD irq\n");
+ free_irq(port->irq, port);
+ return retval;
+ }
+ }
+ if (port->mapbase == AT91RM9200_BASE_US3) {
+ retval = request_irq(AT91_PIN_PA24, atmel_u3_DCD_interrupt, 0, "atmel_serial", port);
+ if (retval) {
+ printk("atmel_serial: atmel_startup - Can't get u3DCD irq\n");
+ free_irq(port->irq, port);
+ return retval;
+ }
+ }
+
/*
* Initialize DMA (if necessary)
*/
@@ -603,6 +688,10 @@
kfree(atmel_port->pdc_rx[0].buf);
}
free_irq(port->irq, port);
+ if (port->mapbase == AT91RM9200_BASE_US0)
+ free_irq(AT91_PIN_PA19, port);
+ if (port->mapbase == AT91RM9200_BASE_US3)
+ free_irq(AT91_PIN_PA24, port);
return -ENOMEM;
}
pdc->dma_addr = dma_map_single(port->dev, pdc->buf, PDC_BUFFER_SIZE, DMA_FROM_DEVICE);
@@ -636,6 +725,10 @@
retval = atmel_open_hook(port);
if (retval) {
free_irq(port->irq, port);
+ if (port->mapbase == AT91RM9200_BASE_US0)
+ free_irq(AT91_PIN_PA19, port);
+ if (port->mapbase == AT91RM9200_BASE_US3)
+ free_irq(AT91_PIN_PA24, port);
return retval;
}
}
@@ -701,6 +794,10 @@
* Free the interrupt
*/
free_irq(port->irq, port);
+ if (port->mapbase == AT91RM9200_BASE_US0)
+ free_irq(AT91_PIN_PA19, port);
+ if (port->mapbase == AT91RM9200_BASE_US3)
+ free_irq(AT91_PIN_PA24, port);
/*
* If there is a specific "close" function (to unregister
|
