1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
|
/*
* 8devices Lima board support
*
* Copyright (C) 2016 Mantas Pucka <mantas@8devices.com>
* Copyright (C) 2017 Karol Dudek <karoiz@sli.pl>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/platform_device.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include <asm/mach-ath79/ath79.h>
#include "common.h"
#include "dev-ap9x-pci.h"
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "dev-spi.h"
#include "dev-usb.h"
#include "dev-wmac.h"
#include "machtypes.h"
#include "pci.h"
#define LIMA_GPIO_BTN_1_DEFAULT 16
#define LIMA_KEYS_POLL_INTERVAL 20 /* msecs */
#define LIMA_KEYS_DEBOUNCE_INTERVAL (3 * LIMA_KEYS_POLL_INTERVAL)
#define LIMA_ETH_PHYS (BIT(0) | BIT(1))
#define LIMA_MAC0_OFFSET 0x0000
#define LIMA_MAC1_OFFSET 0x0006
#define LIMA_CALDATA_OFFSET 0x1000
#define LIMA_WMAC_MAC_OFFSET 0x0800
static struct gpio_keys_button lima_gpio_keys[] __initdata = {
{
.desc = "button1",
.type = EV_KEY,
.code = BTN_1,
.debounce_interval = LIMA_KEYS_DEBOUNCE_INTERVAL,
.gpio = LIMA_GPIO_BTN_1_DEFAULT,
.active_low = 1,
}
};
static void __init lima_setup(void)
{
u8 *art = (u8 *) KSEG1ADDR(0x1f080000);
ath79_register_m25p80(NULL);
ath79_register_gpio_keys_polled(-1, LIMA_KEYS_POLL_INTERVAL,
ARRAY_SIZE(lima_gpio_keys),
lima_gpio_keys);
ath79_setup_ar933x_phy4_switch(true, true);
ath79_init_mac(ath79_eth0_data.mac_addr, art + LIMA_MAC0_OFFSET, 0);
ath79_init_mac(ath79_eth1_data.mac_addr, art + LIMA_MAC1_OFFSET, 0);
ath79_register_mdio(0, ~LIMA_ETH_PHYS);
ath79_switch_data.phy4_mii_en = 1;
ath79_switch_data.phy_poll_mask |= BIT(0);
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
ath79_eth1_data.duplex = DUPLEX_FULL;
ath79_eth1_data.phy_mask = BIT(1);
ath79_register_eth(1);
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
ath79_eth0_data.duplex = DUPLEX_FULL;
ath79_eth0_data.speed = SPEED_100;
ath79_eth0_data.phy_mask = BIT(0);
ath79_register_eth(0);
ath79_register_wmac(art + LIMA_CALDATA_OFFSET,
art + LIMA_WMAC_MAC_OFFSET);
ath79_register_usb();
ath79_register_pci();
}
MIPS_MACHINE(ATH79_MACH_LIMA, "LIMA", "8devices Lima board", lima_setup);
|
