1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
|
From 793bed29e78cc54d989333d756fef51efaca4e56 Mon Sep 17 00:00:00 2001
From: Weijie Gao <weijie.gao@mediatek.com>
Date: Tue, 26 Jul 2022 09:29:18 +0800
Subject: [PATCH 58/71] mmc: mtk-sd: add support to display verbose error log
Add an option to enable debug log, and also display verbose error log for
both command and data.
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
---
drivers/mmc/Kconfig | 8 ++++++++
drivers/mmc/Makefile | 4 ++++
drivers/mmc/mtk-sd.c | 24 +++++++++++++++---------
3 files changed, 27 insertions(+), 9 deletions(-)
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -789,6 +789,14 @@ config MMC_MTK
This is needed if support for any SD/SDIO/MMC devices is required.
If unsure, say N.
+config MMC_MTK_DEBUG
+ bool "Display verbose error log"
+ default n
+ depends on MMC_MTK
+ help
+ Enable this option to allow verbose error log being displayed for
+ debugging.
+
endif
config FSL_ESDHC
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -84,3 +84,7 @@ obj-$(CONFIG_RENESAS_SDHI) += tmio-comm
obj-$(CONFIG_MMC_BCM2835) += bcm2835_sdhost.o
obj-$(CONFIG_MMC_MTK) += mtk-sd.o
obj-$(CONFIG_MMC_SDHCI_F_SDH30) += f_sdh30.o
+
+ifdef CONFIG_MMC_MTK_DEBUG
+CFLAGS_mtk-sd.o += -DDEBUG
+endif
--- a/drivers/mmc/mtk-sd.c
+++ b/drivers/mmc/mtk-sd.c
@@ -778,18 +778,24 @@ static int msdc_ops_send_cmd(struct udev
if (cmd_ret &&
!(cmd_ret == -EIO &&
(cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK ||
- cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK_HS200)))
+ cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK_HS200))) {
+ dev_dbg(dev, "MSDC start command failure with %d, cmd=%d, arg=0x%x\n",
+ cmd_ret, cmd->cmdidx, cmd->cmdarg);
return cmd_ret;
-
- if (data) {
- data_ret = msdc_start_data(host, data);
- if (cmd_ret)
- return cmd_ret;
- else
- return data_ret;
}
- return 0;
+ if (!data)
+ return cmd_ret;
+
+ data_ret = msdc_start_data(host, data);
+ if (cmd_ret)
+ return cmd_ret;
+
+ if (data_ret)
+ dev_dbg(dev, "MSDC start data failure with %d, cmd=%d, arg=0x%x\n",
+ data_ret, cmd->cmdidx, cmd->cmdarg);
+
+ return data_ret;
}
static void msdc_set_timeout(struct msdc_host *host, u32 ns, u32 clks)
|