aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ramips: add support for Zbtlink ZBT-WG1602-V04Alexander Horner2022-11-054-0/+259
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Description heavily based on commit 7e89421a7c3855d66a20350a5bf9ca4cc7a2caf9 by Sergey Ryazanov <ryazanov.s.a@gmail.com> Details I cannot confirm have been removed Completed with great help from \x on IRC. Thanks, \x! Zbtlink ZBT-WG1602-V04 is a Wi-Fi router intendend for use with WWAN (UMTS/LTE/3G/4G) modems. The router board offers a couple of miniPCIe slots with USB and SIM only and another one which is a pure miniPCIe slot as well as five Gigabit Ethernet ports (4xLAN + WAN). Specification: * SoC: MT7621A * RAM: 256/512 MiB * Flash: 16/32 MiB * Eth: 10/100/1000 Mbps Ethernet x5 ports (4xLAN + WAN) * WLAN 2GHz: MT7603E (.11bgn, MIMO 2x2) * WLAN 5GHz: MT7662E (.11nac, MIMO 2x2) * WLAN Ants: detachable x2, shared by 2GHz & 5GHz radios * miniPCIe: 2x slots with USB&SIM + 1x slot with regular PCIe bus * WWAN Ants: detachable x4 * External storage: microSD (SDXC) slot * USB: 3.0 Type-A port * LED: 11 (5 per Eth phy, 3 SoC controlled, 2 WLAN 2/5 controlled, 1 power indicator) * Button: 1 (reset) * UART: console (115200 baud) * Power: DC jack (12 V / 2.5 A) Additional HW information: * SoC USB port 1 is shared by internal miniPCIe slot and external Type-A USB port, USB D+/D- lines are toggled between ports using a GPIO controlled DPDT switch. Installation: The kernel image can be installed directly onto the device via a browser to 192.168.1.1 using the built in firmware recovery Web UI available. It can be accessed by pushing the reset button in, applying power and holding the reset button for approximately 10 seconds. When the kernel image has been flashed, you can access LuCI and upload the sysupgrade as normal. Signed-off-by: Alexander Horner <ahorner@programmer.net>
* ramips: add support for Youku X2Shiji Yang2022-11-054-1/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Specifications: SOC: MT7620AN + MT7612EN RAM: 128 MiB DDR2 Flash: 16 MiB (Winbond W25Q28FVFG) WLAN: 2.4G + 5G LAN: LAN ports *2 WAN: WAN port *1 USB: USB2.0 *1 SD Card: MicroSD *1 Buttons: Reset *1 LEDs: ethernet *3, system, usb, wlan2g, wlan5g MAC Address: use address source label 54:36:9b:xx:xx:ac lan lan 54:36:9b:xx:xx:ac factory.0x0028 wan 54:36:9b:xx:xx:ad factory.0x002e wlan2g 54:36:9b:xx:xx:ae factory.0x0004 wlan5g 54:36:9b:xx:xx:af factory.0x8004 Installation: 1. Apply initramfs-kernel.bin in stock firmware Web UI. 2. Install sysupgrade.bin on OpenWrt and do not retain any configuration. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: improve compatibility for Youku YK-L2 and YK-L1 seriesShiji Yang2022-11-054-2/+10
| | | | | | | | | | | | | | Add UIMAGE_NAME and UIMAGE_MAGIC to allow users to directly install initramfs-kernel.bin from the stock firmware Web UI. At the same time, this change makes it possible to boot OpenWrt with the official u-boot. Notice: Since the stock firmware is based on OpenWrt and the configuration will be retained by default during the upgrade process, so we must use initramfs-kernel.bin to do a initial installation. After the system restarts, install sysupgrade.bin and do not retain any configuration. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* uboot-layerscape: adjust LS1012A-IOT config and envPawel Dembicki2022-11-052-1/+46
| | | | | | | | | | | | | | | In a254279a6c30 LS1012A-IOT kernel image was switched to FIT. But u-boot config is lack of FIT and ext4 support. This patch enables it. It also fix envs, because for some reason this board need to use "loadaddr" variable in brackets. Fixes: #9894 Fixes: a254279a6c30 ("layerscape: Change to combined rootfs on sd images") Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* valgrind: update to 3.20.0Nick Hainke2022-11-051-2/+2
| | | | | | | Release Notes: https://valgrind.org/docs/manual/dist.news.html Signed-off-by: Nick Hainke <vincent@systemli.org>
* kernel: further cleanup of xfrm[4|6]_mode*Martin Schiller2022-11-053-14/+0
| | | | | | | | | In my commit da5c45f4d886 ("kernel: remove handling of xfrm[4|6]_mode_* modules") I missed a few default config options and description entries. Those should be gone as well. Fixes: da5c45f4d886 ("kernel: remove handling of xfrm[4|6]_mode_* modules") Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* realtek: fix typo in debug messageLuiz Angelo Daros de Luca2022-11-051-2/+2
| | | | | | vid_end was mentioned twice. Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
* kernel: bump 5.15 to 5.15.77John Audia2022-11-0516-56/+55
| | | | | | | | | | | | | | | | | Manually rebased: bcm27xx/patches-5.15/950-0600-xhci-quirks-add-link-TRB-quirk-for-VL805.patch bcm27xx/patches-5.15/950-0606-usb-xhci-add-VLI_TRB_CACHE_BUG-quirk.patch bcm27xx/patches-5.15/950-0717-usb-xhci-add-a-quirk-for-Superspeed-bulk-OUT-transfe.patch bcm53xx/patches-5.15/180-usb-xhci-add-support-for-performing-fake-doorbell.patch lantiq/patches-5.15/0028-NET-lantiq-various-etop-fixes.patch All other patches automatically rebased Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <therealgraysky@proton.me>
* kernel: bump 5.10 to 5.10.153John Audia2022-11-057-29/+28
| | | | | | | | | | Manually rebased: bcm53xx/patches-5.10/180-usb-xhci-add-support-for-performing-fake-doorbell.patch lantiq/patches-5.10/0028-NET-lantiq-various-etop-fixes.patch All patches automatically rebased. Signed-off-by: John Audia <therealgraysky@proton.me>
* tools/fakeroot: update to 1.30.1Nick Hainke2022-11-052-5/+5
| | | | | | | | | | Release Notes: https://tracker.debian.org/news/1381350/accepted-fakeroot-1301-1-source-into-unstable/ Refresh patches: - 600-macOS.patch Signed-off-by: Nick Hainke <vincent@systemli.org>
* openssl: bump to 1.1.1sJohn Audia2022-11-0514-168/+2527
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changes between 1.1.1r and 1.1.1s [1 Nov 2022] *) Fixed a regression introduced in 1.1.1r version not refreshing the certificate data to be signed before signing the certificate. [Gibeom Gwon] Changes between 1.1.1q and 1.1.1r [11 Oct 2022] *) Fixed the linux-mips64 Configure target which was missing the SIXTY_FOUR_BIT bn_ops flag. This was causing heap corruption on that platform. [Adam Joseph] *) Fixed a strict aliasing problem in bn_nist. Clang-14 optimisation was causing incorrect results in some cases as a result. [Paul Dale] *) Fixed SSL_pending() and SSL_has_pending() with DTLS which were failing to report correct results in some cases [Matt Caswell] *) Fixed a regression introduced in 1.1.1o for re-signing certificates with different key sizes [Todd Short] *) Added the loongarch64 target [Shi Pujin] *) Fixed a DRBG seed propagation thread safety issue [Bernd Edlinger] *) Fixed a memory leak in tls13_generate_secret [Bernd Edlinger] *) Fixed reported performance degradation on aarch64. Restored the implementation prior to commit 2621751 ("aes/asm/aesv8-armx.pl: avoid 32-bit lane assignment in CTR mode") for 64bit targets only, since it is reportedly 2-17% slower and the silicon errata only affects 32bit targets. The new algorithm is still used for 32 bit targets. [Bernd Edlinger] *) Added a missing header for memcmp that caused compilation failure on some platforms [Gregor Jasny] Build system: x86_64 Build-tested: bcm2711/RPi4B Run-tested: bcm2711/RPi4B Signed-off-by: John Audia <therealgraysky@proton.me>
* elfutils: update to 1.88Nick Hainke2022-11-054-8/+8
| | | | | | | | | | | | Release Notes: https://sourceware.org/pipermail/elfutils-devel/2022q4/005561.html Refresh patches: - 003-libintl-compatibility.patch - 100-musl-compat.patch - 101-no-fts.patch Signed-off-by: Nick Hainke <vincent@systemli.org>
* tools/elfutils: update to 1.88Nick Hainke2022-11-051-2/+2
| | | | | | | Release Notes: https://sourceware.org/pipermail/elfutils-devel/2022q4/005561.html Signed-off-by: Nick Hainke <vincent@systemli.org>
* strace: update to 6.0Nick Hainke2022-11-051-2/+2
| | | | | | | Release Notes: https://github.com/strace/strace/releases/tag/v6.0 Signed-off-by: Nick Hainke <vincent@systemli.org>
* tools/mtd-utils: update to 2.1.5Nick Hainke2022-11-053-6/+6
| | | | | | | | | | | Release Notes: https://lore.kernel.org/buildroot/c0992bbb-9487-9a51-ea9f-39cf074b61ec@sigma-star.at/ Refresh patches: - 130-lzma_jffs2.patch - 320-mkfs.jffs2-SOURCE_DATE_EPOCH.patch Signed-off-by: Nick Hainke <vincent@systemli.org>
* tools/mtools: update to 4.0.42Nick Hainke2022-11-051-2/+2
| | | | | | | Release Notes: https://lists.gnu.org/archive/html/info-mtools/2022-10/msg00000.html Signed-off-by: Nick Hainke <vincent@systemli.org>
* mediatek: replace mt7986 watchdog assert patch with upstreamNick Hainke2022-11-053-57/+99
| | | | | | | | Replace "920-watchdog-add-mt7986-assert.patch" with upstreamed - 920-v5.16-watchdog-mtk-add-disable_wdt_extrst-support.patch - 921-v5.19-watchdog-mtk_wdt-mt7986-Add-toprgu-reset-controller.patch Signed-off-by: Nick Hainke <vincent@systemli.org>
* mediatek: mt7629: add tag to upstreamed patchesNick Hainke2022-11-051-0/+0
| | | | | | The patches were upstreamed. Signed-off-by: Nick Hainke <vincent@systemli.org>
* mediatek: add tag for upstreamed patchesNick Hainke2022-11-053-0/+0
| | | | | | The patches were upstreamed. Signed-off-by: Nick Hainke <vincent@systemli.org>
* mediatek: mt7986: add tag to upstreamed patchesNick Hainke2022-11-052-0/+0
| | | | | | | The patch "210-pinctrl-mediatek-add-support-for-MT7986-SoC.patch" and "212-clk-mediatek-add-mt7986-clock-support.patch" are upstreamed. Signed-off-by: Nick Hainke <vincent@systemli.org>
* mediatek: mt7622: add tag to upstreamed patchesNick Hainke2022-11-052-0/+0
| | | | | | | | The patches "191-arm64-dts-mt7622-specify-the-L2-cache-topology.patch" and "192-arm64-dts-mt7622-specify-the-number-of-DMA-requests.patch" are upstreamed to 5.19. Signed-off-by: Nick Hainke <vincent@systemli.org>
* mediatek: filogic: disable swconfigAleksander Jan Bajkowski2022-11-051-1/+0
| | | | | | | | | | | | This subtarget supports 3 devices: * Bananapi BPi-R3 (added in a96382c1bb204698cd43e82193877c10e4b63027), * MediaTek MTK7986 rfba AP (added in cffc77ae55ed0e5b9e70417d6a1e1d280cea92cf), * MediaTek MTK7986 rfbb AP (added in cffc77ae55ed0e5b9e70417d6a1e1d280cea92cf). This subtarget supports DSA from the beginning. It looks like CONFIG_SWCONFIG was copied from another config when the subtarget was created. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* mediatek: filogic: refresh configAleksander Jan Bajkowski2022-11-051-4/+4
| | | | | | | This was done by executing these command: $ time make kernel_oldconfig CONFIG_TARGET=subtarget Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* uhttpd: use procd to reload on acme renewGlen Huang2022-11-043-6/+2
| | | | | | | Calling /etc/init.d/uhttpd reload directly in the acme hotplug script can inadvertently start a stopped instance. Signed-off-by: Glen Huang <i@glenhuang.com>
* bcm4908: backport upstream BQL support for bcm4908_enetRafał Miłecki2022-11-031-1/+4
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: Refresh generic patchesHauke Mehrtens2022-11-031-4/+4
| | | | | | | This patch was out of sync. Fixes: 1673b7dca384 ("kernel: backport fixes for MediaTek Ethernet driver") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: sort filesystems symbols alphabeticallyRafał Miłecki2022-11-021-35/+36
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: backport fixes for MediaTek Ethernet driverDaniel Golle2022-11-026-1/+164
| | | | | | | Backport patches from net-next which fix possible memory and resource leaks in the error codepaths of WED initialization. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: support hw flow-offloading counters on newer MediaTek SoCsDaniel Golle2022-11-021-0/+409
| | | | | | | | The packet processing engine (PPE) found in newer ARM-based MediaTek SoCs provides packet and byte counters for offloaded streams. Import pending patch reading and using those counters. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: remove obsolete patchDaniel Golle2022-11-021-24/+0
| | | | | | | | | The patch enabling hardware flow offloading support on the MT7623 SoC has been merged upstream as of Linux 5.13. Remove our local patch which wrongly got forward-ported and now actually enables hardware flow offloading for the MT2701 SoC family (unsupported in OpenWrt). Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* firewall: config: drop input traffic by defaultBaptiste Jonglez2022-11-011-1/+1
| | | | | | | | | | | | | | | | | | | This is necessary with firewall4 to avoid a hard-to-diagnose race condition during boot, causing DNAT rules not to be taken into account correctly. The root cause is that, during boot, the ruleset is mostly empty, and interface-related rules (including DNAT rules) are added incrementally. If a packet hits the input chain before the DNAT rules are setup, it can create buggy conntrack entries that will persist indefinitely. This new default should be safe because firewall4 explicitly accepts authorized traffic and rejects the rest. Thus, in normal operations, the default policy is not used. Fixes: #10749 Ref: https://github.com/openwrt/openwrt/issues/10749 Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
* libnl-tiny: update to the latest versionHauke Mehrtens2022-11-011-3/+3
| | | | | | db3b2cd libnl-tiny: set SOCK_CLOEXEC if available Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* iwinfo: update to the latest versionHauke Mehrtens2022-11-011-3/+3
| | | | | | 00aab87 Correctly identify key management algorithms starting with "FT-" Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-envtools: Fix format of autogenerated sectorsSven Eckelmann2022-11-012-0/+2
| | | | | | | | | | | | | The sector number must be stored in hex. Otherwise, the number (like 16) will be parsed as hex and any write to the partition will end up with an error like: MTD erase error on /dev/mtd5: Invalid argument Fixes: 9adfeccd8415 ("uboot-envtools: Add support for IPQ806x AP148 and DB149") Fixes: 54b275c8ed3a ("ipq40xx: add target") Signed-off-by: Sven Eckelmann <sven@narfation.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@fungible.com>
* kernel: Add kmod-drm-ttm-helperHauke Mehrtens2022-11-011-2/+16
| | | | | | | | | | | | Add a package for drm_ttm_helper.ko. CONFIG_DRM_TTM_HELPER is compiled into the kernel on armvirt/64, x86/64, x86/generic and x86/legacy because also some DRM drivers are compiled into the kernel. On x86/geode it is not compiled into the kernel, but kmod-drm-amdgpu and kmod-drm-radeon depend on it. This fixes the x86/geode build. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* realtek: mark clock source as continuousSander Vanheule2022-11-011-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | After replacing the R4K event timer and clock source with the new Realtek Otto timer, performance for RTL839x devices was severely impacted, as reported by Hiroshi. Research by Markus showed that after commit 4657a5301eb5 ("realtek: avoid busy waiting for RTL839x PHY read/write"), the ethernet driver could only update a phy once per timer interval, which also heavily impacted boot time. On e.g. a Zyxel GS1900-48, this added around a minute to the time to fully initialise the switch. By marking the otto clocksource as continuous, the kernel enables it to be used for high resolution timers. This allows readx_poll_timeout() to sleep for less than one system timer interval, reducing system dead time. Link: https://github.com/openwrt/openwrt/issues/11117 Reported-by: INAGAKI Hiroshi <musashino.open@gmail.com> Cc: Markus Stockhausen <markus.stockhausen@gmx.de> Signed-off-by: Sander Vanheule <sander@svanheule.net> Tested-by: INAGAKI Hiroshi <musashino.open@gmail.com> # Panasonic Switch-M48eG PN28480K Tested-by: Jan Hoffmann <jan@3e8.eu> # HPE 1920-8G, HPE 1920-48G
* target/realtek: use netif_receive_skb_listRosen Penev2022-11-011-1/+4
| | | | | | Small performance improvement on rx. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* mediatek: consider adc_oe thermal calibration value in efuseDaniel Golle2022-10-311-1/+1
| | | | | | | | | The use of the adc_oe value stored in the efuse has been dropped in MediaTek's SDK during a recent refactorization of the temperature calculation formula. Don't ignore this offset value and again include it in raw-to-deg-celsius calculation. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ramips: add support for YunCore FAP690Volodymyr Puiul2022-10-315-1/+165
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is an in-wall 802.11ax (Wi-Fi 6) router, based on MediaTek MT7621A. Specifications: - SoC: MT7621AT (880MHz, 2 Cores) - RAM: 128 MB - Flash: 16 MB SPI NOR - Wi-Fi: - MT7915DN + MT7905DAN: 2.4/5 GHz - Ethernet: 1x 1GiE via MT7530 - UART: J4 (115200 baud) - Pinout: [3V3] (TXD) (RXD) (GND) - Bootloader: U-Boot - Buttons: - SW1 - no label on the box, combined with led - Led: Status. RGB controlled by - GPIO 14 - green color - GPIO 15 - red color - GPIO 16 - blue color Installation: OEM firmware is based on LEDE with custom UI and support standard sysupgrade variant of firmware. However it requires "*.ubin" extension for sysupgrade file. Always select "Factory reset" switch on upgrade to OpenWRT, otherwise it will not boot. MAC addresses as verified by OEM firmware: vendor source LAN factory 0x4 (label) 5g factory 0x4 (label) 2g label with flipped bits bit in 1-st byte and bits 5, 6, 7 in 4-th byte Example label: 44:xx:xx:b7:xx:xx lan: 44:xx:xx:b7:xx:xx 2g 46:xx:xx:c7:xx:xx 5g 44:xx:xx:b7:xx:xx Signed-off-by: Volodymyr Puiul <volodymyr.puiul@gmail.com>
* tools/ccache: update to 4.7.2Raihaan Shouhell2022-10-311-2/+2
| | | | | | | Release Notes: https://ccache.dev/releasenotes.html#_ccache_4_7_2 Signed-off-by: Raihaan Shouhell <raihaanhimself@gmail.com>
* tools/ccache: update to 4.7.1Raihaan Shouhell2022-10-312-3/+3
| | | | | | | Release Notes: https://ccache.dev/releasenotes.html#_ccache_4_7_1 Signed-off-by: Raihaan Shouhell <raihaanhimself@gmail.com>
* tools/ccache: update to 4.7Raihaan Shouhell2022-10-312-10/+10
| | | | | | | Release Notes: https://ccache.dev/releasenotes.html#_ccache_4_7 Signed-off-by: Raihaan Shouhell <raihaanhimself@gmail.com>
* kernel: remove handling of xfrm[4|6]_mode_* modulesMartin Schiller2022-10-313-18/+2
| | | | | | | | | | | | | | | For kernel versions before 5.2, the required IPsec modes have to be enabled explicitly (they are built-in for newer kernels). Commit 1556ed155a9a ("kernel: mode_beet mode_transport mode_tunnel xfram modules") tried to handle this, but it does not really work. Since we don't support these kernel versions anymore and the code is also broken, let's remove it. Signed-off-by: Martin Schiller <ms@dev.tdt.de> [Remove old generic config options too] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* expat: update to 2.5.0Nick Hainke2022-10-311-2/+2
| | | | | | | | | Fixes CVE-2022-43680. Changes: https://github.com/libexpat/libexpat/blob/R_2_5_0/expat/Changes Signed-off-by: Nick Hainke <vincent@systemli.org>
* odhcpd: update to git HEADHans Dedecker2022-10-311-3/+3
| | | | | | | | a92c0a7 dhcpv6-ia: make tmp lease file hidden 4a673e1 fix null pointer dereference for INFORM messages 860ca90 odhcpd: Support for Option NTP and SNTP Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* CI: packages: Add github CI job to build all packagesHauke Mehrtens2022-10-311-0/+151
| | | | | | | | | | | | | | | | | | | | This will build OpenWrt for MIPS malta BE and x86 64 Bit with all packages and kernel modules activated. It is triggered when something changes in the build system or when a package definition is changed. This task probably needs 90 minutes to execute, but I hope that it will find build problems in pull requests early. This intentionally does not activate the feeds, because building them too would take too long. We only build x86/64 and malta/be to save resources. I would like to detect build problems when a package is changed. We often had build breaks when a package version was increased sometime even in other packages which used it as a dependency. This is based on the .github/workflows/packages.yml workflow. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* bpf: check llvm version only when usedHauke Mehrtens2022-10-311-0/+2
| | | | | | | | | | | | unetd always includes $(INCLUDE_DIR)/bpf.mk. This file always checks if the LLVM version is supported in CLANG_VER_VALID. unetd only needs bpf when UNETD_VXLAN_SUPPORT is set. It fails when UNETD_VXLAN_SUPPORT is not set and llvm is not installed. Fix it by only checking the LLVM version when a LLVM toolchain is available. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* at91: Remove CONFIG_PINCTRL_MCP23S08 configuration optionHauke Mehrtens2022-10-312-2/+0
| | | | | | | | The CONFIG_PINCTRL_MCP23S08 configuration option is already unset in the generic kernel configuration. Fixes: f938512af639 ("target/at91: replace gpio-mcp23s08 with pinctrl-mcp23s08-spi update config") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* Revert "at91:"Hauke Mehrtens2022-10-312-0/+2
| | | | | | | | This reverts commit 7cc6ffa1b903524fe478804fd215bb858ae8c9b7. This should have been folded in an other commit. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* at91:Hauke Mehrtens2022-10-302-2/+0
| | | | | [CONFIG_PINCTRL_MCP23S08 is already unset in generic config] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
generated by cgit v1.2.3 (git 2.25.1) at 2025-04-13 19:42:59 +0000