aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* generic: enable CRYPTO_LIB_BLAKE2S[_X86|_ARM]Tomasz Maciej Nowak2022-06-2489-2/+175
| | | | | | | | | | | | This is now built-in, enable so it won't propagate on target configs. Link: https://lkml.org/lkml/2022/1/3/168 Fixes: 79e7a2552e89 ("kernel: bump 5.15 to 5.15.44") Fixes: 0ca93670693b ("kernel: bump 5.10 to 5.10.119") Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> (Link to Kernel's commit taht made it built-in, CRYPTO_LIB_BLAKE2S[_ARM|_X86] as it's selectable, 5.10 backport) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: clean-up after kernel 5.4 removalTomasz Maciej Nowak2022-06-248-30/+19
| | | | | | | These narrowments are no longer useful, since there's no lower version than 5.10 supported in tree. Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* nftables: update to 1.0.4Nick Hainke2022-06-241-2/+2
| | | | | | | | | | | | Needs libnftnl 1.2.2. 3eb0da9f build: Bump version to 1.0.4 a964d1b5 tests: shell: remove leftover modules on cleanup 818f7dde evaluate: reset ctx->set after set interval evaluation 3835de19 tests: shell: sets_with_ifnames release netns on exit 59bd944f optimize: segfault when releasing unsupported statement Signed-off-by: Nick Hainke <vincent@systemli.org>
* libnftnl: update to 1.2.2Nick Hainke2022-06-241-2/+2
| | | | | | | | build: libnftnl 1.2.2 release accee9a set_elem: missing export symbol e2514c0 exthdr: tcp option reset support Signed-off-by: Nick Hainke <vincent@systemli.org>
* nftables: clean up MakefileNick Hainke2022-06-241-3/+4
| | | | | | Add PKG_LICENSE_FILES. Use SPDX. Signed-off-by: Nick Hainke <vincent@systemli.org>
* nftables: update to 1.0.3Nick Hainke2022-06-242-32/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove backport: - 001-examples-compile-with-make-check.patch 87fdf683 build: Bump version to 1.0.3 c4ec825b nft: simplify chain lookup in do_list_chain 4f6724f1 intervals: fix compilation --with-mini-gmp 4c20fe95 json: update json output ordering to place rules after chains 57741350 netlink_delinearize: release last register on exit d6fdb0d8 sets_with_ifnames: add test case for concatenated range 88b2345a segtree: add pretty-print support for wildcard strings in concatenated sets 806ab081 netlink: swap byteorder for host-endian concat data c224aa6b intervals: deletion should adjust range not yet in the kernel ea1f1c9f optimize: memleak in statement matrix 0a6dbfce optimize: merge nat rules with same selectors into map 743b0e81 optimize: do not clone unsupported statement c8b35039 optimize: incorrect logic in verdict comparison fc4da141 src: fix always-true assertions d1289bff intervals: set on EXPR_F_KERNEL flag for new elements in set cache 721b9dec tests: add concat test case with integer base type subkey 22b750aa src: allow use of base integer types as set keys in concatenations 3ed9fada intervals: build list of elements to be added from cache e45b4939 intervals: fix deletion of multiple ranges with automerge 3b7b22ae intervals: add elements with EXPR_F_KERNEL to purge list only ea31855d netlink: remove unused argument from helper function 48204bd7 intervals: Simplify element sanity checks ab1b21be intervals: unset EXPR_F_KERNEL for adjusted elements e0beff27 src: restore interval sets work with string datatypes 3e8d934e intervals: support to partial deletion with automerge 7a6e1604 evaluate: allow for zero length ranges 3da9643f intervals: add support to automerge with kernel elements 7b061e63 mnl: update mnl_nft_setelem_del() to allow for more reuse fdb8e0ff src: remove rbtree datastructure 81e36530 src: replace interval segment tree overlap and automerge f1cc44ed src: add EXPR_F_KERNEL to identify expression in the kernel ad43b84e segtree: add support for get element with sets that contain ifnames 06db2308 segtree: use correct byte order for 'element get' 4c6681a7 tests: add testcases for interface names in sets 5e393ea1 segtree: add string "range" reversal support 2fb4d7ea src: make interval sets work with string datatypes 403936c1 evaluate: string prefix expression must retain original length ada50f84 segtree: split prefix and range creation to a helper function ae7d32fc evaluate: keep prefix expression length d2b23984 evaluate: make byteorder conversion on string base type a no-op c36ecfc2 tests: py: Add meta time tests without 'meta' keyword 6fa4ff56 tests: py: Don't colorize output if stderr is redirected f561a0cc tests: monitor: Hide temporary file names from error output 75fea8a5 tests: py: extend meta time coverage 4460b839 meta: fix compiler warning in date_type_parse() 02100978 meta: time: use uint64_t instead of time_t 4e0026dc include: add missing `#include` ab74fb5b examples: add .gitignore file bcad4761 tests: py: add inet/vmap tests 214494aa optimize: Restore optimization for raw payload expressions 82762ab6 src: allow to use integer type header fields via typeof set declaration 64bb3f43 src: allow to use typeof of raw expressions in set declaration ff0f30e3 expression: typeof verdict needs verdict datatype 60f5c107 src: copy field_count for anonymous object maps as well 4cf97abf rule: Avoid segfault with anonymous chains 4e718641 evaluate: init cmd pointer for new on-stack context 1ea71c23 optimize: do not assume log prefix 3f36cc6c optimize: do not merge unsupported statement expressions 19960c8d optimize: incorrect assert() for unexpected expression type 3de1dbd2 optimize: more robust statement merge with vmap 99eb4696 optimize: fix vmap with anonymous sets e8f0fa21 scanner: Fix for ipportmap nat statements 59d184be scanner: dup, fwd, tproxy: Move to own scopes 069a0450 scanner: meta: Move to own scope 2165324d scanner: at: Move to own scope a67fce7f scanner: nat: Move to own scope 578467c1 scanner: policy: move to own scope a1669709 scanner: flags: move to own scope 020372d9 scanner: reject: Move to own scope 543bf3c2 scanner: import, export: Move to own scopes 88105810 scanner: reset: move to own Scope 8a7e430a scanner: monitor: Move to own Scope e5547017 scanner: rt: Extend scope over rt0, rt2 and srh 04c95f14 scanner: type: Move to own scope 62a95698 scanner: dst, frag, hbh, mh: Move to own scopes a060d912 scanner: ah, esp: Move to own scopes 4e215fdf scanner: osf: Move to own scope 5166b298 scanner: dccp, th: Move to own scopes 3e04a6e2 scanner: udp{,lite}: Move to own scope bbdcfbfa scanner: comp: Move to own scope. 232f2c32 scanner: synproxy: Move to own scope 26b53653 scanner: tcp: Move to own scope f5722119 scanner: igmp: Move to own scope a7d8cca9 scanner: icmp{,v6}: Move to own scope 5d837d27 src: add tcp option reset support 1d507ce7 build: explicitly pass --version-script to linker e98a9b83 libnftables.map: export new nft_ctx_{get,set}_optimize API 9eb98b3b tests: add test case for flowtable with owner flag 18a08fb7 examples: compile with `make check' and add AM_CPPFLAGS Signed-off-by: Nick Hainke <vincent@systemli.org>
* ath79: bsap18x0: specify FIS directory location in dtsTomasz Maciej Nowak2022-06-244-90/+1
| | | | | | | | | The redboot-fis parser has option to specify the location of FIS directory, use that, instead of patching the parser to scan for it, and specifying location in kernel config. Tested-by: Brian Gonyer <bgonyer@gmail.com> Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* treewide: use upstream compatible for RedBoot FIS parserTomasz Maciej Nowak2022-06-245-48/+4
| | | | | | No reason to keep that around, since upstream one does the same. Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* ath79: bsap18x0: pad rootfs imageTomasz Maciej Nowak2022-06-241-1/+1
| | | | | | | | | | This image is supposed to be written with help of bootloader to the flash, but as it stands, it's not aligned to block size and RedBoot will happily create non-aligned partition size in FIS directory. This could lead to kernel to mark the partition as read-only, therefore pad the image to block erase size boundary. Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* ath79: ja76pf2: use nvmem cells to specify MAC addressesTomasz Maciej Nowak2022-06-242-4/+15
| | | | | | | | | | | | The bootloader on this board hid the partition containig MAC addresses and prevented adding this space to FIS directory, therefore those had to be stored in RedBoot configuration as aliases to be able to assigne them to proper interfaces. Now that fixed partition size are used instead of redboot-fis parser, the partition containig MAC addresses could be specified, and with marking it as nvmem cell, we can assign them without userspace involvement. Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* ath79: move image check for devices with RedBootTomasz Maciej Nowak2022-06-242-31/+46
| | | | | | | | | | Don't comence the switch to RAMFS when the image format is wrong. This led to rebooting the device, which could lead to false impression that upgrade succeded. Being here, factor out the code responsible for upgrading RedBoot devices to separate file. Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* ath79: switch some RedBoot based devices to OKLI loaderTomasz Maciej Nowak2022-06-248-38/+120
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After the kernel has switched version to 5.10, JA76PF2 and RouterStations lost the capability to sysupgrade the OpenWrt version. The cause is the lack of porting the patches responsible for partial flash erase block writing and these boards FIS directory and RedBoot config partitions share the same erase block. Because of that the FIS directory can't be updated to accommodate kernel/rootfs partition size changes. This could be remedied by bootloader update, but it is very intrusive and could potentially lead to non-trivial recovery procedure, if something went wrong. The less difficult option is to use OpenWrt kernel loader, which will let us use static partition sizes and employ mtd splitter to dynamically adjust kernel and rootfs partition sizes. On sysupgrade from ath79 19.07 or 21.02 image, which still let to modify FIS directory, the loader will be written to kernel partition, while the kernel+rootfs to rootfs partition. The caveats are: * image format changes, no possible upgrade from ar71xx target images * downgrade to any older OpenWrt version will require TFTP recovery or usage of bootloader command line interface To downgrade to 19.07 or 21.02, or to upgrade if one is already on OpenWrt with kernel 5.10, for RouterStations use TFTP recovery procedure. For JA76PF2 use instructions from this commit message: commit 0cc87b3bacee ("ath79: image: disable sysupgrade images for routerstations and ja76pf2"), replacing kernel image with loader (loader.bin suffix) and rootfs image with firmware (firmware.bin suffix). Fixes: b10d6044599d ("kernel: add linux 5.10 support") Fixes: 15aa53d7ee65 ("ath79: switch to Kernel 5.10") Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> (mkubntimage was moved to generic-ubnt.mk) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ath79: jj76pf2: enable TCN75 sensorTomasz Maciej Nowak2022-06-242-1/+14
| | | | | | | | This SBC has Microchip TCN75 sensor, wich measures ambient temperature. Specify it in dts to allow readout by applications using kernel hwmon API. Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* include/prereq-build.mk: macOS cross build improvementsMark Mentovai2022-06-241-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | This updates prereq-build.mk to find a suitable realpath utility, and adds another place to look for a suitable getopt utility. realpath has been used most notably by scripts/ipkg-build since commit bb95be9265a9 ("scripts,ipkg-build: use realpath for pkg_dir") and there are assorted other uses of it during a build. It is ordinarily provided by GNU coreutils. This adds a SetupHostCommand to locate it either under its own name or under grealpath, the name that it will be available as under MacPorts or Homebrew, which use --program-prefix=g. Similarly, update the SetupHostCommand for getopt to be able to locate a util-linux getopt at the default path used by MacPorts, in the same fashion that commit cc16f5d73e77 ("build: try to find getopt in macOS homebrew's standard location")' did for Homebrew. As there is no standard alternative --program-prefix for util-linux utilities in the way that GNU packages often use a "g" prefix, this path-based approach is required in case a non-util-linux getopt (such as one provided by an OS) shadows the util-linux getopt in the PATH. Signed-off-by: Mark Mentovai <mark@moxienet.com>
* omap: enable 5.15 as testing kernelAlexey Smirnov2022-06-241-0/+1
| | | | | | Compiled for and run-tested on BBB Signed-off-by: Alexey Smirnov <s.alexey@gmail.com>
* omap: update config for 5.15Alexey Smirnov2022-06-241-22/+17
| | | | | | This was done by executing make kernel_oldconfig Signed-off-by: Alexey Smirnov <s.alexey@gmail.com>
* omap: copy config from 5.10 to 5.15Alexey Smirnov2022-06-241-0/+680
| | | | | | copy config from 5.10 to 5.15 Signed-off-by: Alexey Smirnov <s.alexey@gmail.com>
* kernel: add kmod-leds-turris-omniaStefan Kalscheuer2022-06-242-1/+17
| | | | | | | | | | | | | | Add support for LEDs of the CZ.NIC Turris Omnia using the upstream driver. There is no generic way to control the LEDs in UCI manner, however the kernel module is the first step to actually use the RGB LEDs in custom logic. Signed-off-by: Stefan Kalscheuer <stefan@stklcode.de> (removed DMARC notice, added driver to Turris Omnia, moved module recipe to target/linux/mvebu/modules.mk) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ramips: force ZyXEL NR7101 to boot from "Kernel" partitionBjørn Mork2022-06-241-0/+1
| | | | | | | | | | | | | | | | | | | Make sure BootingFlag points to the system partition we install to. The BootingFlag variable selects which system partition the system boots from (0 => "Kernel", 1 => "Kernel2"). OpenWrt does not yet have device specific support for this dual image scheme, and can therefore only boot from "Kernel". This has not been an issue until now, since all known OEM firmware versions have ignored "Kernel2" - leaving the BootingFlag fixed at 0. But the newest OEM firmware has a new upgrade procedure, installing to the "inactive" system partition and setting BootingFlag accordingly. This workaround is needed until the dual image scheme is fully supported. Signed-off-by: Bjørn Mork <bjorn@mork.no>
* ramips: mt7621-dts: fix claiming rgmii2 pin group for EdgeRouter X SFPArınç ÜNAL2022-06-242-5/+7
| | | | | | | | | | | | | | | | | | | For a TX->TX connected external phy to transmit/receive data, the rgmii2 pin group needs to be claimed with gpio function, at least for EdgeRouter X SFP. We already claim the pin group under the pinctrl node with gpio function on the gpio node on mt7621_ubnt_edgerouter-x.dtsi. However, we should claim a pin group under its consumer node. It's the ethernet node in this case, which we already claim the rgmii2 pin group under it on mt7621.dtsi. Therefore, set the function as gpio on the rgmii2 node for EdgeRouter X SFP and get rid of claiming the rgmii2 pin group under the pinctrl node. With this change, we also get to remove a definition from mt7621_ubnt_edgerouter-x.dtsi which is specific to EdgeRouter X SFP. This change is tested on an EdgeRouter X SFP. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
* bcm53xx: copy patch disabling GRO to kernel 5.15Rafał Miłecki2022-06-241-0/+36
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: enable & setup packet steeringRafał Miłecki2022-06-242-0/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Packet steering can improve NAT masquarade performance on Northstar by 40-50%. It makes reaching 940-942 Mb/s possible on BCM4708 (and obviously BCM47094 too). Add scripts setting up the most optimal Northstar setup. Below are testing results for running iperf TCP traffic from LAN to WAN. They were used to pick up golden values. ┌──────────┬──────────┬────────────────────┬────────────────────┐ │ eth0 │ br-lan │ flow_offloading=0 │ flow_offloading=1 │ │ │ ├─────────┬──────────┼─────────┬──────────┤ │ rps_cpus │ rps_cpus │ BCM4708 │ BCM47094 │ BCM4708 │ BCM47094 │ ├──────────┼──────────┼─────────┼──────────┼─────────┼──────────┤ │ 0 │ 0 │ 387 │ 671 │ 707 │ 941 │ │ 0 │ 1 │ 343 │ 576 │ 705 │ 941 │ │ 0 │ 2 │ ✓ 574 │ ✓ 941 │ 704 │ 940 │ │ 1 │ 0 │ 320 │ 549 │ 561 │ 941 │ │ 1 │ 1 │ 327 │ 551 │ 553 │ 941 │ │ 1 │ 2 │ 523 │ ✓ 940 │ 559 │ 940 │ │ 2 │ 0 │ 383 │ 652 │ ✓ 940 │ 941 │ │ 2 │ 1 │ 448 │ 754 │ ✓ 942 │ 941 │ │ 2 │ 2 │ 404 │ 655 │ ✓ 941 │ 941 │ └──────────┴──────────┴─────────┴──────────┴─────────┴──────────┘ Above tests were performed with all eth0 interrupts handled by CPU0. Setting "echo 2 > /proc/irq/38/smp_affinity" was tested on BCM4708 but it didn't increased speeds (just required different steering): ┌──────────┬──────────┬───────────┐ │ eth0 │ br-lan │ flow_offl │ │ rx-0 │ rx-0 │ oading=0 │ │ rps_cpus │ rps_cpus │ BCM4708 │ ├──────────┼──────────┼───────────┤ │ 0 │ 0 │ 384 │ │ 0 │ 1 │ ✓ 574 │ │ 0 │ 2 │ 348 │ │ 1 │ 0 │ 383 │ │ 1 │ 1 │ 412 │ │ 1 │ 2 │ 448 │ │ 2 │ 0 │ 321 │ │ 2 │ 1 │ 520 │ │ 2 │ 2 │ 327 │ └──────────┴──────────┴───────────┘ Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: disable GRO by default at kernel levelRafał Miłecki2022-06-241-0/+36
| | | | | | | | | | This improves NAT masquarade network performance. An alternative to kernel change would be runtime setup but that requires ethtool and identifying relevant network interface and all related switch ports interfaces. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* realtek: fix gcc-12 build with -Werror=array-compareBjørn Mork2022-06-221-1/+1
| | | | | | | | | Removing this gcc-12 error: arch/mips/rtl838x/setup.c:64:30: error: comparison between two arrays [-Werror=array-compare] 64 | else if (__dtb_start != __dtb_end) Signed-off-by: Bjørn Mork <bjorn@mork.no>
* realtek: make "u-boot-env" partition writable for Netgear 3xx seriesAndreas Böhler2022-06-221-1/+0
| | | | | | | | | The Netgear GS3xx devices do not properly initialise the port LEDs during startup unless the boot command in U-Boot is changed. Making the U-Boot env partition writable allows this modification to be done from within OpenWrt by calling "fw_setenv bootcmd rtk network on\; boota". Signed-off-by: Andreas Böhler <dev@aboehler.at>
* realtek: make Netgear GS1xx u-boot env partition writableStijn Segers2022-06-221-1/+0
| | | | | | | | | | | Make the u-boot environment partition for the NETGEAR GS108T v3 and GS110TPP writable (they share a DTS), so the values can be manipulated from userspace. See https://forum.openwrt.org/t/57875/1567 for a real world example. Signed-off-by: Stijn Segers <foss@volatilesystems.org>
* ath79: support for TP-Link EAP225-Outdoor v3Paul Maruhn2022-06-223-0/+71
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This model is almost identical to the EAP225-Outdoor v1. Major difference is the RTL8211FS PHY Chipset. Device specifications: * SoC: QCA9563 @ 775MHz * Memory: 128MiB DDR2 * Flash: 16MiB SPI-NOR * Wireless 2.4GHz (SoC): b/g/n 2x2 * Wireless 5GHz (QCA9886): a/n/ac 2x2 MU-MIMO * Ethernet (RTL8211FS): 1× 1GbE, PoE Flashing instructions: * ssh into target device with recent (>= v1.6.0) firmware * run `cliclientd stopcs` on target device * upload factory image via web interface Debricking: To recover the device, you need access to the serial port. This requires fine soldering to test points, or the use of probe pins. * Open the case and solder wires to the test points: RXD, TXD and TPGND4 * Use a 3.3V UART, 115200 baud, 8n1 * Interrupt bootloader by holding ctrl+B during boot * upload initramfs via built-in tftp client and perform sysupgrade setenv ipaddr 192.168.1.1 # default, change as required setenv serverip 192.168.1.10 # default, change as required tftp 0x80800000 initramfs.bin bootelf $fileaddr MAC addresses: MAC address (as on device label) is stored in device info partition at an offset of 8 bytes. ath9k device has same address as ethernet, ath10k uses address incremented by 1. From stock ifconfig: ath0 Link encap:Ethernet HWaddr D8:...:2E ath10 Link encap:Ethernet HWaddr D8:...:2F br0 Link encap:Ethernet HWaddr D8:...:2E eth0 Link encap:Ethernet HWaddr D8:...:2E Signed-off-by: Paul Maruhn <paulmaruhn@posteo.de> Co-developed-by: Philipp Rothmann <philipprothmann@posteo.de> Signed-off-by: Philipp Rothmann <philipprothmann@posteo.de> [Add pre-calibraton nvme-cells] Tested-by: Tido Klaassen <tido_ff@4gh.eu> Signed-off-by: Nick Hainke <vincent@systemli.org>
* ath79: generic: add support for Realtek PHYPhilipp Rothmann2022-06-221-0/+1
| | | | | | | Some models of the TP-Link EAP225 series use a Realtek PHY, therefore the driver is added. Signed-off-by: Philipp Rothmann <philipprothmann@posteo.de>
* mt76: update to the latest versionFelix Fietkau2022-06-211-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 4554ee652caf mt76: mt7921: fix warning Using plain integer as NULL pointer a3f1d6ccf3ca mt76: mt7921: add missing bh-disable around rx napi schedule 9aeca2a5ce47 mt76: mt7921: get rid of mt7921_mcu_exit fee8a5911c76 mt76: connac: move shared fw structures in connac module db4d784ae7ba mt76: mt7921: move fw toggle in mt7921_load_firmware 16ab6bf49556 mt76: connac: move mt76_connac2_load_ram in connac module 29fd748801c6 mt76: connac: move mt76_connac2_load_patch in connac module 051c68d18214 mt76: mt7663: rely on mt76_connac2_fw_trailer d6ae3505ac6c mt76: enable the VHT extended NSS BW feature 488a5ccc9762 mt76: mt7921: rely on mt76_dev in mt7921_mac_write_txwi signature 934029bb93e2 mt76: mt7915: rely on mt76_dev in mt7915_mac_write_txwi signature ecefae4c7d72 mt76: connac: move mac connac2 defs in mt76_connac2_mac.h b5eecc841df8 mt76: connac: move connac2_mac_write_txwi in mt76_connac module 012e619a07b9 mt76: connac: move mt76_connac2_mac_add_txs_skb in connac module 1b492be795ea mt76: mt7921: not support beacon offload disable command f1f46d3b4b19 mt76: mt7921: fix command timeout in AP stop period cae61112ef1d mt76: connac: move HE radiotap parsing in connac module 487674062643 mt76: connac: move mt76_connac2_reverse_frag0_hdr_trans in mt76-connac module 649bdc4983c4 mt76: connac: move mt76_connac2_mac_fill_rx_rate in connac module cb75aaa39252 mt76: mt7921s: remove unnecessary goto in mt7921s_mcu_drv_pmctrl e0eaf66eaebb mt76: mt7615: do not update pm stats in case of error f8d125b4ea30 mt76: mt7921: do not update pm states in case of error 6329a834907e mt76: mt7921s: fix possible sdio deadlock in command fail 8a04f1b04662 mt76: mt7921: fix aggregation subframes setting to HE max e52283439094 mt76: mt7915: disable UL MU-MIMO for mt7915 fd3958970e3d mt76: mt7921: enlarge maximum VHT MPDU length to 11454 18df38fe77f7 mt76: mt7915: get rid of unnecessary new line in mt7915_mac_write_txwi 149e95f5d7a6 mt76: connac: move mt76_connac_fw_txp in common module 899d192e8a79 mt76: move mt7615_txp_ptr in mt76_connac module 7184f0a6f6a5 mt76: connac: move mt76_connac_tx_free in shared code c42d45278fa5 mt76: connac: move mt76_connac_tx_complete_skb in shared code 0993f4ef96f8 mt76: connac: move mt76_connac_write_hw_txp in shared code 467960fab791 mt76: connac: move mt7615_txp_skb_unmap in common code 2e758064b085 mt76: mt7915: rely on mt76_connac_tx_free 2065a7901671 mt76: move mcu_txd/mcu_rxd structures in shared code 576c1b7c472b mt76: move mt76_connac2_mcu_fill_message in mt76_connac module 7275f7758090 mt76: mt7915: fix incorrect testmode ipg on band 1 caused by wmm_idx Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: filter -no-plt from KCFLAGSKevin Darbyshire-Bryant2022-06-212-2/+1
| | | | | | | | | | | | Compiler option -no-plt will break kernel builds on some architectures eg. (x86) Filter this option from the recently introduced handling of KCFLAGS vs EXTRA_OPTIMISATION Fixes: 1d42af720c6b ("kernel: use KCFLAGS for passing EXTRA_OPTIMIZATION flags") Suggested-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* hostapd: document ubus methodsStijn Tintel2022-06-211-0/+416
| | | | | | | Document the ubus methods we added to hostapd so that people don't have to read code to figure out which methods are available and what they do. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* bcm47xx: Fix Netgear WNR3500L v2 image formatFlorian Fainelli2022-06-201-0/+2
| | | | | | | | CFE on these devices expects to find the kernel compressed with LZMA but with no dictionnary and no loader, adjust the image generation accordingly. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* bcm47xx: Updated devices database for Netgear WNR3500L V2Florian Fainelli2022-06-202-50/+144
| | | | | | | Update the device databases to contain an entry for the Netgear WNR3500L v2 router, the same buttons and LEDs mapping as v1 is used. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* bcm47xx: Add support for brcmnand controller on BCMA busFlorian Fainelli2022-06-2010-1/+862
| | | | | | | | Back port the patches being submitted upstream in order to make the NAND controller work on BCM47187/5358. This is a prerequisite for supporting devices like the Netgear WNR3500L V2. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* broadcom-wl: Fix compilation with kernel 5.10Florian Fainelli2022-06-204-8/+50
| | | | | | | | | | | | | This adds a few fixes for compiling against Linux 5.10: 1. segment_eq() has been removed with upstream commit 428e2976a5bf7e7f5554286d7a5a33b8147b106a ("uaccess: remove segment_eq") and can use uaccess_kernel() instead 2. ioremap_nocache() is removed and is now an alias for ioremap() with upstream commit 4bdc0d676a643140bdf17dbf7eafedee3d496a3c ("remove ioremap_nocache and devm_ioremap_nocache") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* kernel: drop patch adding hardcoded kernel compilation flagsRafał Miłecki2022-06-202-50/+0
| | | | | | | | | | | | | | | | | | | 1. KCFLAGS should be used for custom flags 2. Optimization flags are arch / SoC specific 3. -fno-reorder-blocks may *worsen* network performace on some SoCs 4. Usage of flags was *reversed* since 5.4 and noone reported that If we really need custom flags then CONFIG_KERNEL_CFLAGS should get default value adjusted properly (per target). Ref: 4e0c54bc5bc8 ("kernel: add support for kernel 5.4") Link: http://lists.openwrt.org/pipermail/openwrt-devel/2022-June/038853.html Link: https://patchwork.ozlabs.org/project/openwrt/patch/20190409093046.13401-1-zajec5@gmail.com/ Cc: Felix Fietkau <nbd@nbd.name> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: support setting extra CFLAGS for kernel compilationRafał Miłecki2022-06-202-1/+5
| | | | | | They may be used e.g. to optimize kernel size or performance. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* lantiq: dts: fix reset controller reference on Danube and AR9Martin Blumenstingl2022-06-202-2/+2
| | | | | | | | | | | ar9.dtsi and danube.dtsi only have one reset controller and they are naming it "reset". This is equivalent to "reset0" in vr9.dtsi. Fix the references to the reset controller in the recently added PCI controller reset line. Fixes: 087f2cba26faf0 ("lantiq: dts: Add the reset line for the PCI controller") Reported-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* ramips: fix booting on ZyXEL NBG-419N v2Piotr Dymacz2022-06-201-0/+1
| | | | | | | | | | | | | This fixes a well known "LZMA ERROR 1" error, reported previously on numerous of other devices from 'ramips' target. Fixes: #9842 Fixes: #8964 Reported-by: Juergen Hench <jurgen.hench@gmail.com> Tested-by: Juergen Hench <jurgen.hench@gmail.com> Signed-off-by: Demetris Ierokipides <ierokipides.dem@gmail.com> Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* kernel: use KCFLAGS for passing EXTRA_OPTIMIZATION flagsRafał Miłecki2022-06-193-19/+7
| | | | | | | This uses kernel's generic variable and doesn't require patching it with a custom Makefile change. It's expected *not* to change any behaviour. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: backport mtd parser for Sercomm partitionsRafał Miłecki2022-06-197-16/+621
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* 464xlat: delete SNATed conntracks on interface teardownAlin Nastac2022-06-192-1/+4
| | | | | | | | | Existing conntracks will continue to be SNATed to 192.0.0.1 even after 464xlat interface gets teared down. To prevent this, matching conntracks must be killed. Signed-off-by: Alin Nastac <alin.nastac@gmail.com> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
* mvebu: add SolidRun ClearFog GT 8KLogan Blyth2022-06-193-3/+20
| | | | | | | | ClearFog GT 8K is device sold by SolidRun. It is marketed as a development board, not a consumer product. The device tree file for this board is upstream in kernel.org. Signed-off-by: Logan Blyth <mrbojangles3@gmail.com>
* apm821xx: align gpio-keys node names with dt-schemaChristian Lamparter2022-06-195-8/+8
| | | | | | | | | | | | As per the series: <https://www.spinics.net/lists/devicetree/msg508906.html> "Enforce specific naming pattern for children (keys) to narrow the pattern thus do not match other properties. This will require all children to be properly prefixed or suffixed (button, event, switch or key)." Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* failsafe: run on all consoles listed in /proc/cmdlineMark Mentovai2022-06-192-35/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On x86, when both CONFIG_GRUB_CONSOLE and CONFIG_GRUB_SERIAL are set (as they are by default), the kernel command line will have two console= entries, such as console=tty0 console=ttyS0,115200n8 Failsafe was only running a shell on the first defined console, the VGA console. This is a problem for devices like apu2, where there is only a serial console and it appears on ttyS0. Moreover, the console prompt to enter failsafe during boot was delivered to, and its input read from, the last console= on the kernel command line. So while the failsafe shell was on the first defined console, only the last defined console could be used to enter failsafe during boot. In contrast, the x86 bootloader (GRUB) operates on both the serial console and the VGA console by virtue of "terminal_{input,output} console serial". GRUB also provided an alternate means to enter failsafe from either console. The presence of two console= kernel command line parameters causes kernel messages to be delivered to both. Under normal operation (not failsafe), procd runs login in accordance with inittab, which on x86 specifies ttyS0, hvc0, and tty1, allowing login through any of serial, hypervisor, or VGA console. Thus, serial access was consistently available on x86 devices with serial consoles under normal operation, except for shell access in failsafe mode (without editing the kernel command line). By presenting the failsafe prompt, reading failsafe prompt input, and running failsafe shells on all consoles listed in /proc/cmdline, failsafe mode will work correctly on devices with a serial console (like apu2), and the same image without any need for reconfiguration can be shared by devices with the more traditional (for x86) VGA console. This improvement should benefit any system with multiple console= arguments, including x86 and bcm27xx (Raspberry Pi). Signed-off-by: Mark Mentovai <mark at moxienet.com>
* libusb: fix missing linkLeo Soares2022-06-191-1/+1
| | | | | | | | | adds `libusb-1.0.so` link on the target root again. Fixes: 43539a6aabbe ("libusb: make InstallDev explicit") Signed-off-by: Leo Soares <leo@hyper.ag> (added fixed tag, reworded commit) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* lantiq: dts: Add the reset line for the PCI controllerMartin Blumenstingl2022-06-193-0/+6
| | | | | | | The PCI controller has it's reset line wired up to bit 13 of RCU. Describe this in our .dtsi files. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* ath10k: backport encapsulation offload supportZhijun You2022-06-1911-20/+520
| | | | | | | | This backports encap offload support from upstream. On some ath10k devices there can be about 10% improvement on tx throughput. Users can turn it on by setting frame_mode=2. Signed-off-by: Zhijun You <hujy652@gmail.com>
* ath79: add support for Netgear PGZNG1Chris Blake2022-06-196-0/+379
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the Netgear PGZNG1, also known as the ADT Pulse Gateway. Hardware: CPU: Atheros AR9344 Memory: 256MB Storage: 256MB NAND Hynix H27U2G8F2CTR-BC USB: 1x USB 2.0 Ethernet: 2x 100Mb/s WiFi: Atheros AR9340 2.4GHz 2T2R Leds: 8 LEDs Button: 1x Reset Button UART: Header marked JPE1. Pinout is VCC, TX, RX, GND. The marked pin, closest to the JPE1 marking, is VCC. Note VCC isn't required to be connected for UART to work. Enable Stock Firmware Shell Access: 1. Interrupt u-boot and run the following commands setenv console_mode 1 saveenv reset This will enable a UART shell in the firmware. You can then login using the root password of `icontrol`. If that doesn't work, the device is running a firmware based on OpenWRT where you can drop into failsafe to mount the FS and then modify /etc/passwd. Installation Instructions: 1. Interupt u-boot and run the following commands setenv active_image 0 setenv stock_bootcmd nboot 0x81000000 0 \${kernel_offset} setenv openwrt_bootcmd nboot 0x82000000 0 \${kernel_offset} setenv bootcmd run openwrt_bootcmd saveenv 2. boot initramfs image via TFTP u-boot tftpboot 0x82000000 openwrt-ath79-nand-netgear_pgzng1-initramfs-kernel.bin; bootm 0x82000000 3. Once booted, use LuCI sysupgrade to flash openwrt-ath79-nand-netgear_pgzng1-squashfs-sysupgrade.bin MAC Table: WAN (eth0): xx:xa - caldata 0x0 LAN (eth1): xx:xb - caldata 0x6 WLAN (phy0): xx:xc - burned into ath9k caldata Not Working: Z-Wave RS422 Signed-off-by: Chris Blake <chrisrblake93@gmail.com> (added more hw-info, fixed file permissions) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: add kmod-leds-pca955xChris Blake2022-06-191-0/+19
| | | | | | | | | This patch adds support for the mainline kernel module for the PCA955x LED driver. Note this requires i2c and GPIO support. Also worth calling out this driver also enables GPIO support, depending on device tree configuration. Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-20 13:42:07 +0000