diff options
Diffstat (limited to 'target')
27 files changed, 75 insertions, 213 deletions
diff --git a/target/linux/bcm27xx/patches-5.4/950-0055-Added-Device-IDs-for-August-DVB-T-205.patch b/target/linux/bcm27xx/patches-5.4/950-0055-Added-Device-IDs-for-August-DVB-T-205.patch index a4e4bd1e88..f0c1896e33 100644 --- a/target/linux/bcm27xx/patches-5.4/950-0055-Added-Device-IDs-for-August-DVB-T-205.patch +++ b/target/linux/bcm27xx/patches-5.4/950-0055-Added-Device-IDs-for-August-DVB-T-205.patch @@ -9,7 +9,7 @@ Subject: [PATCH] Added Device IDs for August DVB-T 205 --- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c +++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c -@@ -1938,6 +1938,10 @@ static const struct usb_device_id rtl28x +@@ -1947,6 +1947,10 @@ static const struct usb_device_id rtl28x &rtl28xxu_props, "Compro VideoMate U650F", NULL) }, { DVB_USB_DEVICE(USB_VID_KWORLD_2, 0xd394, &rtl28xxu_props, "MaxMedia HU394-T", NULL) }, diff --git a/target/linux/bcm27xx/patches-5.4/950-0174-media-videobuf2-Allow-exporting-of-a-struct-dmabuf.patch b/target/linux/bcm27xx/patches-5.4/950-0174-media-videobuf2-Allow-exporting-of-a-struct-dmabuf.patch index 74d03540ad..24ea0a9717 100644 --- a/target/linux/bcm27xx/patches-5.4/950-0174-media-videobuf2-Allow-exporting-of-a-struct-dmabuf.patch +++ b/target/linux/bcm27xx/patches-5.4/950-0174-media-videobuf2-Allow-exporting-of-a-struct-dmabuf.patch @@ -19,7 +19,7 @@ Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org> --- a/drivers/media/common/videobuf2/videobuf2-core.c +++ b/drivers/media/common/videobuf2/videobuf2-core.c -@@ -2073,12 +2073,12 @@ static int __find_plane_by_offset(struct +@@ -2084,12 +2084,12 @@ static int __find_plane_by_offset(struct return -EINVAL; } @@ -35,7 +35,7 @@ Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org> struct dma_buf *dbuf; if (q->memory != VB2_MEMORY_MMAP) { -@@ -2128,6 +2128,21 @@ int vb2_core_expbuf(struct vb2_queue *q, +@@ -2139,6 +2139,21 @@ int vb2_core_expbuf(struct vb2_queue *q, return -EINVAL; } diff --git a/target/linux/bcm27xx/patches-5.4/950-0445-dma-mapping-treat-dev-bus_dma_mask-as-a-DMA-limit.patch b/target/linux/bcm27xx/patches-5.4/950-0445-dma-mapping-treat-dev-bus_dma_mask-as-a-DMA-limit.patch index 344e1ee37e..711d06fd51 100644 --- a/target/linux/bcm27xx/patches-5.4/950-0445-dma-mapping-treat-dev-bus_dma_mask-as-a-DMA-limit.patch +++ b/target/linux/bcm27xx/patches-5.4/950-0445-dma-mapping-treat-dev-bus_dma_mask-as-a-DMA-limit.patch @@ -249,7 +249,7 @@ Signed-off-by: Christoph Hellwig <hch@lst.de> * @dma_pfn_offset: offset of DMA memory range relatively of RAM * @dma_parms: A low level driver may set these to teach IOMMU code about * segment limitations. -@@ -1270,7 +1270,7 @@ struct device { +@@ -1271,7 +1271,7 @@ struct device { not all hardware supports 64 bit addresses for consistent allocations such descriptors. */ diff --git a/target/linux/bcm27xx/patches-5.4/950-0489-media-v4l2-mem2mem-add-stateless_-try_-decoder_cmd-i.patch b/target/linux/bcm27xx/patches-5.4/950-0489-media-v4l2-mem2mem-add-stateless_-try_-decoder_cmd-i.patch index 0b74dbf123..cc32647a73 100644 --- a/target/linux/bcm27xx/patches-5.4/950-0489-media-v4l2-mem2mem-add-stateless_-try_-decoder_cmd-i.patch +++ b/target/linux/bcm27xx/patches-5.4/950-0489-media-v4l2-mem2mem-add-stateless_-try_-decoder_cmd-i.patch @@ -21,7 +21,7 @@ Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> --- a/drivers/media/v4l2-core/v4l2-mem2mem.c +++ b/drivers/media/v4l2-core/v4l2-mem2mem.c -@@ -1218,6 +1218,59 @@ int v4l2_m2m_ioctl_try_decoder_cmd(struc +@@ -1216,6 +1216,59 @@ int v4l2_m2m_ioctl_try_decoder_cmd(struc } EXPORT_SYMBOL_GPL(v4l2_m2m_ioctl_try_decoder_cmd); diff --git a/target/linux/bcm27xx/patches-5.4/950-0500-media-v4l2-mem2mem-allow-request-job-buffer-processi.patch b/target/linux/bcm27xx/patches-5.4/950-0500-media-v4l2-mem2mem-allow-request-job-buffer-processi.patch index a3023cae2b..b43a4d534a 100644 --- a/target/linux/bcm27xx/patches-5.4/950-0500-media-v4l2-mem2mem-allow-request-job-buffer-processi.patch +++ b/target/linux/bcm27xx/patches-5.4/950-0500-media-v4l2-mem2mem-allow-request-job-buffer-processi.patch @@ -168,7 +168,7 @@ Signed-off-by: John Cox <jc@kynesim.co.uk> } schedule_next = _v4l2_m2m_job_finish(m2m_dev, m2m_ctx); unlock: -@@ -983,12 +1074,14 @@ struct v4l2_m2m_ctx *v4l2_m2m_ctx_init(s +@@ -981,12 +1072,14 @@ struct v4l2_m2m_ctx *v4l2_m2m_ctx_init(s m2m_ctx->priv = drv_priv; m2m_ctx->m2m_dev = m2m_dev; init_waitqueue_head(&m2m_ctx->finished); diff --git a/target/linux/bcm27xx/patches-5.4/950-0977-USB-gadget-f_hid-avoid-crashes-and-log-spam.patch b/target/linux/bcm27xx/patches-5.4/950-0977-USB-gadget-f_hid-avoid-crashes-and-log-spam.patch deleted file mode 100644 index 1fe685cd99..0000000000 --- a/target/linux/bcm27xx/patches-5.4/950-0977-USB-gadget-f_hid-avoid-crashes-and-log-spam.patch +++ /dev/null @@ -1,56 +0,0 @@ -From 22198e801db7542c59098a75bdab120bcbc42652 Mon Sep 17 00:00:00 2001 -From: Phil Elwell <phil@raspberrypi.com> -Date: Wed, 30 Sep 2020 19:23:43 +0100 -Subject: [PATCH] USB: gadget: f_hid: avoid crashes and log spam - -Disconnecting and reconnecting the USB cable can lead to crashes and a -variety of kernel log spam. Try to fix or minimise both. - -See: https://github.com/raspberrypi/linux/issues/3870 - -Signed-off-by: Phil Elwell <phil@raspberrypi.com> ---- - drivers/usb/gadget/function/f_hid.c | 18 +++++++++++++++++- - 1 file changed, 17 insertions(+), 1 deletion(-) - ---- a/drivers/usb/gadget/function/f_hid.c -+++ b/drivers/usb/gadget/function/f_hid.c -@@ -344,6 +344,11 @@ static ssize_t f_hidg_write(struct file - - spin_lock_irqsave(&hidg->write_spinlock, flags); - -+ if (!hidg->req) { -+ spin_unlock_irqrestore(&hidg->write_spinlock, flags); -+ return -ESHUTDOWN; -+ } -+ - #define WRITE_COND (!hidg->write_pending) - try_again: - /* write queue */ -@@ -364,7 +369,13 @@ try_again: - count = min_t(unsigned, count, hidg->report_length); - - spin_unlock_irqrestore(&hidg->write_spinlock, flags); -- status = copy_from_user(req->buf, buffer, count); -+ if (req) { -+ status = copy_from_user(req->buf, buffer, count); -+ } else { -+ ERROR(hidg->func.config->cdev, "hidg->req is NULL\n"); -+ status = -ESHUTDOWN; -+ goto release_write_pending; -+ } - - if (status != 0) { - ERROR(hidg->func.config->cdev, -@@ -393,6 +404,11 @@ try_again: - - spin_unlock_irqrestore(&hidg->write_spinlock, flags); - -+ if (!hidg->in_ep->enabled) { -+ ERROR(hidg->func.config->cdev, "in_ep is disabled\n"); -+ status = -ESHUTDOWN; -+ goto release_write_pending; -+ } - status = usb_ep_queue(hidg->in_ep, req, GFP_ATOMIC); - if (status < 0) { - ERROR(hidg->func.config->cdev, diff --git a/target/linux/bcm27xx/patches-5.4/950-0980-SQUASH-USB-gadget-f_hid-remove-more-spam.patch b/target/linux/bcm27xx/patches-5.4/950-0980-SQUASH-USB-gadget-f_hid-remove-more-spam.patch deleted file mode 100644 index 3f199cfdf1..0000000000 --- a/target/linux/bcm27xx/patches-5.4/950-0980-SQUASH-USB-gadget-f_hid-remove-more-spam.patch +++ /dev/null @@ -1,26 +0,0 @@ -From 5018dc559136e2bca24973e71ed8747adf0f37f3 Mon Sep 17 00:00:00 2001 -From: Phil Elwell <phil@raspberrypi.com> -Date: Mon, 5 Oct 2020 15:41:15 +0100 -Subject: [PATCH] SQUASH: USB: gadget: f_hid: remove more spam - -Tidying up the previous patch to this file dropped the deletion of a -particularly noisy error message. Restore its removal. - -See: https://github.com/raspberrypi/linux/issues/3870 - -Signed-off-by: Phil Elwell <phil@raspberrypi.com> ---- - drivers/usb/gadget/function/f_hid.c | 2 -- - 1 file changed, 2 deletions(-) - ---- a/drivers/usb/gadget/function/f_hid.c -+++ b/drivers/usb/gadget/function/f_hid.c -@@ -411,8 +411,6 @@ try_again: - } - status = usb_ep_queue(hidg->in_ep, req, GFP_ATOMIC); - if (status < 0) { -- ERROR(hidg->func.config->cdev, -- "usb_ep_queue error on int endpoint %zd\n", status); - goto release_write_pending; - } else { - status = count; diff --git a/target/linux/generic/backport-5.4/370-netfilter-nf_flow_table-fix-offloaded-connection-tim.patch b/target/linux/generic/backport-5.4/370-netfilter-nf_flow_table-fix-offloaded-connection-tim.patch index 9bcb33b737..bf89af3840 100644 --- a/target/linux/generic/backport-5.4/370-netfilter-nf_flow_table-fix-offloaded-connection-tim.patch +++ b/target/linux/generic/backport-5.4/370-netfilter-nf_flow_table-fix-offloaded-connection-tim.patch @@ -21,7 +21,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c -@@ -1207,18 +1207,6 @@ static bool gc_worker_can_early_drop(con +@@ -1212,18 +1212,6 @@ static bool gc_worker_can_early_drop(con return false; } @@ -40,7 +40,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> static void gc_worker(struct work_struct *work) { unsigned int min_interval = max(HZ / GC_MAX_BUCKETS_DIV, 1u); -@@ -1255,10 +1243,8 @@ static void gc_worker(struct work_struct +@@ -1260,10 +1248,8 @@ static void gc_worker(struct work_struct tmp = nf_ct_tuplehash_to_ctrack(h); scanned++; diff --git a/target/linux/generic/backport-5.4/745-v5.7-net-dsa-mt7530-add-support-for-port-mirroring.patch b/target/linux/generic/backport-5.4/745-v5.7-net-dsa-mt7530-add-support-for-port-mirroring.patch index d4e6f8664d..14bf827806 100644 --- a/target/linux/generic/backport-5.4/745-v5.7-net-dsa-mt7530-add-support-for-port-mirroring.patch +++ b/target/linux/generic/backport-5.4/745-v5.7-net-dsa-mt7530-add-support-for-port-mirroring.patch @@ -17,7 +17,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net> --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -1145,6 +1145,64 @@ mt7530_port_vlan_del(struct dsa_switch * +@@ -1146,6 +1146,64 @@ mt7530_port_vlan_del(struct dsa_switch * return 0; } @@ -82,7 +82,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net> static enum dsa_tag_protocol mtk_get_tag_protocol(struct dsa_switch *ds, int port) { -@@ -1522,6 +1580,8 @@ static const struct dsa_switch_ops mt753 +@@ -1523,6 +1581,8 @@ static const struct dsa_switch_ops mt753 .port_vlan_prepare = mt7530_port_vlan_prepare, .port_vlan_add = mt7530_port_vlan_add, .port_vlan_del = mt7530_port_vlan_del, diff --git a/target/linux/generic/backport-5.4/753-v5.8-net-dsa-mt7530-fix-VLAN-setup.patch b/target/linux/generic/backport-5.4/753-v5.8-net-dsa-mt7530-fix-VLAN-setup.patch index eea9bf28d1..98d213ee6e 100644 --- a/target/linux/generic/backport-5.4/753-v5.8-net-dsa-mt7530-fix-VLAN-setup.patch +++ b/target/linux/generic/backport-5.4/753-v5.8-net-dsa-mt7530-fix-VLAN-setup.patch @@ -15,7 +15,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net> --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -1085,12 +1085,6 @@ mt7530_port_vlan_add(struct dsa_switch * +@@ -1086,12 +1086,6 @@ mt7530_port_vlan_add(struct dsa_switch * struct mt7530_priv *priv = ds->priv; u16 vid; @@ -28,7 +28,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net> mutex_lock(&priv->reg_mutex); for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) { -@@ -1116,12 +1110,6 @@ mt7530_port_vlan_del(struct dsa_switch * +@@ -1117,12 +1111,6 @@ mt7530_port_vlan_del(struct dsa_switch * struct mt7530_priv *priv = ds->priv; u16 vid, pvid; @@ -41,7 +41,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net> mutex_lock(&priv->reg_mutex); pvid = priv->ports[port].pvid; -@@ -1234,6 +1222,7 @@ mt7530_setup(struct dsa_switch *ds) +@@ -1235,6 +1223,7 @@ mt7530_setup(struct dsa_switch *ds) * as two netdev instances. */ dn = ds->ports[MT7530_CPU_PORT].master->dev.of_node->parent; diff --git a/target/linux/generic/backport-5.4/780-net-dsa-mt7530-setup-core-clock-even-in-TRGMII-mode.patch b/target/linux/generic/backport-5.4/780-net-dsa-mt7530-setup-core-clock-even-in-TRGMII-mode.patch index d48d797294..7ad7cd3a01 100644 --- a/target/linux/generic/backport-5.4/780-net-dsa-mt7530-setup-core-clock-even-in-TRGMII-mode.patch +++ b/target/linux/generic/backport-5.4/780-net-dsa-mt7530-setup-core-clock-even-in-TRGMII-mode.patch @@ -21,7 +21,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net> --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -427,34 +427,32 @@ mt7530_pad_clk_setup(struct dsa_switch * +@@ -428,34 +428,32 @@ mt7530_pad_clk_setup(struct dsa_switch * TD_DM_DRVP(8) | TD_DM_DRVN(8)); /* Setup core clock for MT7530 */ diff --git a/target/linux/generic/hack-5.4/221-module_exports.patch b/target/linux/generic/hack-5.4/221-module_exports.patch index 0f7840b8d8..47f40ac5e1 100644 --- a/target/linux/generic/hack-5.4/221-module_exports.patch +++ b/target/linux/generic/hack-5.4/221-module_exports.patch @@ -56,7 +56,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> } \ \ /* __*init sections */ \ -@@ -904,6 +914,8 @@ +@@ -905,6 +915,8 @@ EXIT_TEXT \ EXIT_DATA \ EXIT_CALL \ diff --git a/target/linux/generic/hack-5.4/991-platform-x86-pcengines-apuv2-revert-simswitch.patch b/target/linux/generic/hack-5.4/991-platform-x86-pcengines-apuv2-revert-simswitch.patch deleted file mode 100644 index 84a4191157..0000000000 --- a/target/linux/generic/hack-5.4/991-platform-x86-pcengines-apuv2-revert-simswitch.patch +++ /dev/null @@ -1,56 +0,0 @@ -From 8c9254d41881c81bea610193c6ac59c8cb8b79fe Mon Sep 17 00:00:00 2001 -From: Florian Eckert <fe@dev.tdt.de> -Date: Fri, 27 Mar 2020 16:11:55 +0100 -Subject: [PATCH] Revert "platform/x86: pcengines-apuv2: wire up simswitch gpio - as led" - -This reverts commit 5037d4ddda31c2dbbb018109655f61054b1756dc. - -Commit message from linux: -The APU3+ boards have two SIM sockets, while only one of them -can be routed to the mpcie slots at a time. Selection is done -via simswap gpio. - -We currently don't have a fitting subsystem for those cases yet, -so just wire it up to a LED for the time being. While this isn't -really semantically correct, it's a good compromise. - -Explanation why this does not work: -This change connects the simswap to the LED subsystem of the kernel. -From my point of view, it's nonsense. If we do it this way, then this -can be switched relatively easily via the LED subsystem (trigger: -none/default-on) and that is dangerous! If this is used, it would be -unfavorable, since there is also another trigger (trigger: heartbeat/netdev). -This LED also appears in the LuCI and can therefore be switched by the user. - -Therefore, this simswap GPIO should remain in the GPIO -subsystem and be switched via it and not be connected to the LED -subsystem. To avoid the problems mentioned above. The LED subsystem is -not made for this and it is not a good compromise, but rather dangerous. - -Signed-off-by: Florian Eckert <fe@dev.tdt.de> ---- - drivers/platform/x86/pcengines-apuv2.c | 5 +---- - 1 file changed, 1 insertion(+), 4 deletions(-) - ---- a/drivers/platform/x86/pcengines-apuv2.c -+++ b/drivers/platform/x86/pcengines-apuv2.c -@@ -77,8 +77,7 @@ static const struct amd_fch_gpio_pdata b - static const struct gpio_led apu2_leds[] = { - { .name = "apu:green:1" }, - { .name = "apu:green:2" }, -- { .name = "apu:green:3" }, -- { .name = "apu:simswap" }, -+ { .name = "apu:green:3" } - }; - - static const struct gpio_led_platform_data apu2_leds_pdata = { -@@ -95,8 +94,6 @@ static struct gpiod_lookup_table gpios_l - NULL, 1, GPIO_ACTIVE_LOW), - GPIO_LOOKUP_IDX(AMD_FCH_GPIO_DRIVER_NAME, APU2_GPIO_LINE_LED3, - NULL, 2, GPIO_ACTIVE_LOW), -- GPIO_LOOKUP_IDX(AMD_FCH_GPIO_DRIVER_NAME, APU2_GPIO_LINE_SIMSWAP, -- NULL, 3, GPIO_ACTIVE_LOW), - } - }; - diff --git a/target/linux/generic/pending-5.4/644-net-pppoe-support-hardware-flow-table-offload.patch b/target/linux/generic/pending-5.4/644-net-pppoe-support-hardware-flow-table-offload.patch index d6961e228a..1eb6a83337 100644 --- a/target/linux/generic/pending-5.4/644-net-pppoe-support-hardware-flow-table-offload.patch +++ b/target/linux/generic/pending-5.4/644-net-pppoe-support-hardware-flow-table-offload.patch @@ -21,7 +21,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> #define PPP_VERSION "2.4.2" /* -@@ -1362,12 +1367,37 @@ static void ppp_dev_priv_destructor(stru +@@ -1373,12 +1378,37 @@ static void ppp_dev_priv_destructor(stru ppp_destroy_interface(ppp); } diff --git a/target/linux/generic/pending-5.4/761-net-dsa-mt7530-Support-EEE-features.patch b/target/linux/generic/pending-5.4/761-net-dsa-mt7530-Support-EEE-features.patch index e8f35b6e1f..02b369955b 100644 --- a/target/linux/generic/pending-5.4/761-net-dsa-mt7530-Support-EEE-features.patch +++ b/target/linux/generic/pending-5.4/761-net-dsa-mt7530-Support-EEE-features.patch @@ -9,7 +9,7 @@ Content-Transfer-Encoding: 8bit Signed-off-by: René van Dorst <opensource@vdorst.com> --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -1409,9 +1409,13 @@ static void mt7530_phylink_mac_config(st +@@ -1410,9 +1410,13 @@ static void mt7530_phylink_mac_config(st switch (state->speed) { case SPEED_1000: mcr_new |= PMCR_FORCE_SPEED_1000; @@ -23,7 +23,7 @@ Signed-off-by: René van Dorst <opensource@vdorst.com> break; } if (state->duplex == DUPLEX_FULL) { -@@ -1547,6 +1551,54 @@ mt7530_phylink_mac_link_state(struct dsa +@@ -1548,6 +1552,54 @@ mt7530_phylink_mac_link_state(struct dsa return 1; } @@ -78,7 +78,7 @@ Signed-off-by: René van Dorst <opensource@vdorst.com> static const struct dsa_switch_ops mt7530_switch_ops = { .get_tag_protocol = mtk_get_tag_protocol, .setup = mt7530_setup, -@@ -1574,6 +1626,8 @@ static const struct dsa_switch_ops mt753 +@@ -1575,6 +1627,8 @@ static const struct dsa_switch_ops mt753 .phylink_mac_config = mt7530_phylink_mac_config, .phylink_mac_link_down = mt7530_phylink_mac_link_down, .phylink_mac_link_up = mt7530_phylink_mac_link_up, diff --git a/target/linux/layerscape/patches-5.4/820-usb-0005-usb-dwc3-add-otg-properties-update.patch b/target/linux/layerscape/patches-5.4/820-usb-0005-usb-dwc3-add-otg-properties-update.patch index ccefbffd48..7457b6e009 100644 --- a/target/linux/layerscape/patches-5.4/820-usb-0005-usb-dwc3-add-otg-properties-update.patch +++ b/target/linux/layerscape/patches-5.4/820-usb-0005-usb-dwc3-add-otg-properties-update.patch @@ -54,7 +54,7 @@ Signed-off-by: Peter Chen <peter.chen@nxp.com> * All 3.1 IP version constants are greater than the 3.0 IP --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c -@@ -3578,6 +3578,10 @@ int dwc3_gadget_init(struct dwc3 *dwc) +@@ -3656,6 +3656,10 @@ int dwc3_gadget_init(struct dwc3 *dwc) dwc->gadget.sg_supported = true; dwc->gadget.name = "dwc3-gadget"; dwc->gadget.lpm_capable = true; diff --git a/target/linux/mediatek/patches-5.4/0601-net-dsa-propagate-resolved-link-config-via-mac_link_.patch b/target/linux/mediatek/patches-5.4/0601-net-dsa-propagate-resolved-link-config-via-mac_link_.patch index 913784372b..fe4f9855be 100644 --- a/target/linux/mediatek/patches-5.4/0601-net-dsa-propagate-resolved-link-config-via-mac_link_.patch +++ b/target/linux/mediatek/patches-5.4/0601-net-dsa-propagate-resolved-link-config-via-mac_link_.patch @@ -51,7 +51,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net> struct ethtool_eee *p = &priv->dev->ports[port].eee; --- a/drivers/net/dsa/lantiq_gswip.c +++ b/drivers/net/dsa/lantiq_gswip.c -@@ -1657,7 +1657,9 @@ static void gswip_phylink_mac_link_down( +@@ -1663,7 +1663,9 @@ static void gswip_phylink_mac_link_down( static void gswip_phylink_mac_link_up(struct dsa_switch *ds, int port, unsigned int mode, phy_interface_t interface, @@ -64,7 +64,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net> --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -1442,7 +1442,9 @@ static void mt7530_phylink_mac_link_down +@@ -1443,7 +1443,9 @@ static void mt7530_phylink_mac_link_down static void mt7530_phylink_mac_link_up(struct dsa_switch *ds, int port, unsigned int mode, phy_interface_t interface, diff --git a/target/linux/mediatek/patches-5.4/0602-net-dsa-mt7530-use-resolved-link-config-in-mac_link_.patch b/target/linux/mediatek/patches-5.4/0602-net-dsa-mt7530-use-resolved-link-config-in-mac_link_.patch index 0f437ae153..87235e6054 100644 --- a/target/linux/mediatek/patches-5.4/0602-net-dsa-mt7530-use-resolved-link-config-in-mac_link_.patch +++ b/target/linux/mediatek/patches-5.4/0602-net-dsa-mt7530-use-resolved-link-config-in-mac_link_.patch @@ -15,7 +15,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net> --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -488,17 +488,6 @@ mt7530_mib_reset(struct dsa_switch *ds) +@@ -489,17 +489,6 @@ mt7530_mib_reset(struct dsa_switch *ds) mt7530_write(priv, MT7530_MIB_CCR, CCR_MIB_ACTIVATE); } @@ -33,7 +33,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net> static int mt7530_phy_read(struct dsa_switch *ds, int port, int regnum) { struct mt7530_priv *priv = ds->priv; -@@ -672,7 +661,7 @@ mt7530_port_enable(struct dsa_switch *ds +@@ -673,7 +662,7 @@ mt7530_port_enable(struct dsa_switch *ds priv->ports[port].enable = true; mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK, priv->ports[port].pm); @@ -42,7 +42,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net> mutex_unlock(&priv->reg_mutex); -@@ -695,7 +684,7 @@ mt7530_port_disable(struct dsa_switch *d +@@ -696,7 +685,7 @@ mt7530_port_disable(struct dsa_switch *d priv->ports[port].enable = false; mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK, PCR_MATRIX_CLR); @@ -51,7 +51,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net> mutex_unlock(&priv->reg_mutex); } -@@ -1397,8 +1386,7 @@ static void mt7530_phylink_mac_config(st +@@ -1398,8 +1387,7 @@ static void mt7530_phylink_mac_config(st mcr_cur = mt7530_read(priv, MT7530_PMCR_P(port)); mcr_new = mcr_cur; @@ -61,7 +61,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net> mcr_new |= PMCR_IFG_XMIT(1) | PMCR_MAC_MODE | PMCR_BACKOFF_EN | PMCR_BACKPR_EN | PMCR_FORCE_MODE; -@@ -1406,26 +1394,6 @@ static void mt7530_phylink_mac_config(st +@@ -1407,26 +1395,6 @@ static void mt7530_phylink_mac_config(st if (port == 5 && dsa_is_user_port(ds, 5)) mcr_new |= PMCR_EXT_PHY; @@ -88,7 +88,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net> if (mcr_new != mcr_cur) mt7530_write(priv, MT7530_PMCR_P(port), mcr_new); } -@@ -1436,7 +1404,7 @@ static void mt7530_phylink_mac_link_down +@@ -1437,7 +1405,7 @@ static void mt7530_phylink_mac_link_down { struct mt7530_priv *priv = ds->priv; @@ -97,7 +97,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net> } static void mt7530_phylink_mac_link_up(struct dsa_switch *ds, int port, -@@ -1447,8 +1415,31 @@ static void mt7530_phylink_mac_link_up(s +@@ -1448,8 +1416,31 @@ static void mt7530_phylink_mac_link_up(s bool tx_pause, bool rx_pause) { struct mt7530_priv *priv = ds->priv; diff --git a/target/linux/mediatek/patches-5.4/0603-net-dsa-mt7530-Extend-device-data-ready-for-adding-a.patch b/target/linux/mediatek/patches-5.4/0603-net-dsa-mt7530-Extend-device-data-ready-for-adding-a.patch index 9ac5599a25..291307791d 100644 --- a/target/linux/mediatek/patches-5.4/0603-net-dsa-mt7530-Extend-device-data-ready-for-adding-a.patch +++ b/target/linux/mediatek/patches-5.4/0603-net-dsa-mt7530-Extend-device-data-ready-for-adding-a.patch @@ -17,7 +17,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com> --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -372,8 +372,9 @@ mt7530_fdb_write(struct mt7530_priv *pri +@@ -373,8 +373,9 @@ mt7530_fdb_write(struct mt7530_priv *pri mt7530_write(priv, MT7530_ATA1 + (i * 4), reg[i]); } @@ -28,7 +28,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com> { struct mt7530_priv *priv = ds->priv; u32 ncpo1, ssc_delta, trgint, i, xtal; -@@ -387,7 +388,7 @@ mt7530_pad_clk_setup(struct dsa_switch * +@@ -388,7 +389,7 @@ mt7530_pad_clk_setup(struct dsa_switch * return -EINVAL; } @@ -37,7 +37,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com> case PHY_INTERFACE_MODE_RGMII: trgint = 0; /* PLL frequency: 125MHz */ -@@ -409,7 +410,8 @@ mt7530_pad_clk_setup(struct dsa_switch * +@@ -410,7 +411,8 @@ mt7530_pad_clk_setup(struct dsa_switch * } break; default: @@ -47,7 +47,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com> return -EINVAL; } -@@ -1334,12 +1336,11 @@ mt7530_setup(struct dsa_switch *ds) +@@ -1335,12 +1337,11 @@ mt7530_setup(struct dsa_switch *ds) return 0; } @@ -63,7 +63,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com> switch (port) { case 0: /* Internal phy */ -@@ -1348,33 +1349,114 @@ static void mt7530_phylink_mac_config(st +@@ -1349,33 +1350,114 @@ static void mt7530_phylink_mac_config(st case 3: case 4: if (state->interface != PHY_INTERFACE_MODE_GMII) @@ -189,7 +189,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com> return; } -@@ -1442,61 +1524,44 @@ static void mt7530_phylink_mac_link_up(s +@@ -1443,61 +1525,44 @@ static void mt7530_phylink_mac_link_up(s mt7530_set(priv, MT7530_PMCR_P(port), mcr); } @@ -274,7 +274,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com> phylink_set(mask, Pause); phylink_set(mask, Asym_Pause); -@@ -1592,12 +1657,45 @@ static int mt7530_set_mac_eee(struct dsa +@@ -1593,12 +1658,45 @@ static int mt7530_set_mac_eee(struct dsa return 0; } @@ -323,7 +323,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com> .get_ethtool_stats = mt7530_get_ethtool_stats, .get_sset_count = mt7530_get_sset_count, .port_enable = mt7530_port_enable, -@@ -1614,18 +1712,43 @@ static const struct dsa_switch_ops mt753 +@@ -1615,18 +1713,43 @@ static const struct dsa_switch_ops mt753 .port_vlan_del = mt7530_port_vlan_del, .port_mirror_add = mt7530_port_mirror_add, .port_mirror_del = mt7530_port_mirror_del, @@ -372,7 +372,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com> { /* sentinel */ }, }; MODULE_DEVICE_TABLE(of, mt7530_of_match); -@@ -1663,8 +1786,21 @@ mt7530_probe(struct mdio_device *mdiodev +@@ -1664,8 +1787,21 @@ mt7530_probe(struct mdio_device *mdiodev /* Get the hardware identifier from the devicetree node. * We will need it for some of the clock and regulator setup. */ diff --git a/target/linux/mediatek/patches-5.4/0604-net-dsa-mt7530-Add-the-support-of-MT7531-switch.patch b/target/linux/mediatek/patches-5.4/0604-net-dsa-mt7530-Add-the-support-of-MT7531-switch.patch index 8434c61b50..2d20bbc37c 100644 --- a/target/linux/mediatek/patches-5.4/0604-net-dsa-mt7530-Add-the-support-of-MT7531-switch.patch +++ b/target/linux/mediatek/patches-5.4/0604-net-dsa-mt7530-Add-the-support-of-MT7531-switch.patch @@ -28,7 +28,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com> --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -234,6 +234,12 @@ mt7530_write(struct mt7530_priv *priv, u +@@ -235,6 +235,12 @@ mt7530_write(struct mt7530_priv *priv, u } static u32 @@ -41,7 +41,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com> _mt7530_read(struct mt7530_dummy_poll *p) { struct mii_bus *bus = p->priv->bus; -@@ -481,6 +487,108 @@ mt7530_pad_clk_setup(struct dsa_switch * +@@ -482,6 +488,108 @@ mt7530_pad_clk_setup(struct dsa_switch * return 0; } @@ -150,7 +150,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com> static void mt7530_mib_reset(struct dsa_switch *ds) { -@@ -505,6 +613,217 @@ static int mt7530_phy_write(struct dsa_s +@@ -506,6 +614,217 @@ static int mt7530_phy_write(struct dsa_s return mdiobus_write_nested(priv->bus, port, regnum, val); } @@ -368,7 +368,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com> static void mt7530_get_strings(struct dsa_switch *ds, int port, u32 stringset, uint8_t *data) -@@ -621,9 +940,14 @@ unlock_exit: +@@ -622,9 +941,14 @@ unlock_exit: } static int @@ -385,7 +385,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com> /* Enable Mediatek header mode on the cpu port */ mt7530_write(priv, MT7530_PVC_P(port), PORT_SPEC_TAG); -@@ -636,7 +960,7 @@ mt7530_cpu_port_enable(struct mt7530_pri +@@ -637,7 +961,7 @@ mt7530_cpu_port_enable(struct mt7530_pri mt7530_rmw(priv, MT7530_MFC, CPU_MASK, CPU_EN | CPU_PORT(port)); /* CPU port gets connected to all user ports of @@ -394,7 +394,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com> */ mt7530_write(priv, MT7530_PCR_P(port), PCR_MATRIX(dsa_user_ports(priv->ds))); -@@ -1122,27 +1446,42 @@ mt7530_port_vlan_del(struct dsa_switch * +@@ -1123,27 +1447,42 @@ mt7530_port_vlan_del(struct dsa_switch * return 0; } @@ -444,7 +444,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com> val = mt7530_read(priv, MT7530_PCR_P(port)); if (ingress) { -@@ -1157,7 +1496,7 @@ static int mt7530_port_mirror_add(struct +@@ -1158,7 +1497,7 @@ static int mt7530_port_mirror_add(struct return 0; } @@ -453,7 +453,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com> struct dsa_mall_mirror_tc_entry *mirror) { struct mt7530_priv *priv = ds->priv; -@@ -1174,9 +1513,9 @@ static void mt7530_port_mirror_del(struc +@@ -1175,9 +1514,9 @@ static void mt7530_port_mirror_del(struc mt7530_write(priv, MT7530_PCR_P(port), val); if (!priv->mirror_rx && !priv->mirror_tx) { @@ -466,7 +466,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com> } } -@@ -1282,7 +1621,7 @@ mt7530_setup(struct dsa_switch *ds) +@@ -1283,7 +1622,7 @@ mt7530_setup(struct dsa_switch *ds) PCR_MATRIX_CLR); if (dsa_is_cpu_port(ds, i)) @@ -475,7 +475,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com> else mt7530_port_disable(ds, i); -@@ -1336,6 +1675,118 @@ mt7530_setup(struct dsa_switch *ds) +@@ -1337,6 +1676,118 @@ mt7530_setup(struct dsa_switch *ds) return 0; } @@ -594,7 +594,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com> static bool mt7530_phy_mode_supported(struct dsa_switch *ds, int port, const struct phylink_link_state *state) -@@ -1374,6 +1825,47 @@ unsupported: +@@ -1375,6 +1826,47 @@ unsupported: return false; } @@ -642,7 +642,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com> static bool mt753x_phy_mode_supported(struct dsa_switch *ds, int port, const struct phylink_link_state *state) -@@ -1406,6 +1898,227 @@ mt7530_mac_config(struct dsa_switch *ds, +@@ -1407,6 +1899,227 @@ mt7530_mac_config(struct dsa_switch *ds, return 0; } @@ -870,7 +870,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com> static int mt753x_mac_config(struct dsa_switch *ds, int port, unsigned int mode, const struct phylink_link_state *state) -@@ -1441,6 +2154,8 @@ mt753x_phylink_mac_config(struct dsa_swi +@@ -1442,6 +2155,8 @@ mt753x_phylink_mac_config(struct dsa_swi if (mt753x_mac_config(ds, port, mode, state) < 0) goto unsupported; @@ -879,7 +879,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com> break; case 6: /* 1st cpu port */ if (priv->p6_interface == state->interface) -@@ -1460,7 +2175,8 @@ unsupported: +@@ -1461,7 +2176,8 @@ unsupported: return; } @@ -889,7 +889,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com> dev_err(ds->dev, "%s: in-band negotiation unsupported\n", __func__); return; -@@ -1470,7 +2186,7 @@ unsupported: +@@ -1471,7 +2187,7 @@ unsupported: mcr_new = mcr_cur; mcr_new &= ~PMCR_LINK_SETTINGS_MASK; mcr_new |= PMCR_IFG_XMIT(1) | PMCR_MAC_MODE | PMCR_BACKOFF_EN | @@ -898,7 +898,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com> /* Are we connected to external phy */ if (port == 5 && dsa_is_user_port(ds, 5)) -@@ -1480,7 +2196,18 @@ unsupported: +@@ -1481,7 +2197,18 @@ unsupported: mt7530_write(priv, MT7530_PMCR_P(port), mcr_new); } @@ -918,7 +918,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com> unsigned int mode, phy_interface_t interface) { -@@ -1489,7 +2216,19 @@ static void mt7530_phylink_mac_link_down +@@ -1490,7 +2217,19 @@ static void mt7530_phylink_mac_link_down mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK); } @@ -939,7 +939,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com> unsigned int mode, phy_interface_t interface, struct phy_device *phydev, -@@ -1499,18 +2238,29 @@ static void mt7530_phylink_mac_link_up(s +@@ -1500,18 +2239,29 @@ static void mt7530_phylink_mac_link_up(s struct mt7530_priv *priv = ds->priv; u32 mcr; @@ -971,7 +971,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com> break; } if (duplex == DUPLEX_FULL) { -@@ -1524,6 +2274,45 @@ static void mt7530_phylink_mac_link_up(s +@@ -1525,6 +2275,45 @@ static void mt7530_phylink_mac_link_up(s mt7530_set(priv, MT7530_PMCR_P(port), mcr); } @@ -1017,7 +1017,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com> static void mt7530_mac_port_validate(struct dsa_switch *ds, int port, unsigned long *supported) -@@ -1532,6 +2321,14 @@ mt7530_mac_port_validate(struct dsa_swit +@@ -1533,6 +2322,14 @@ mt7530_mac_port_validate(struct dsa_swit phylink_set(supported, 1000baseX_Full); } @@ -1032,7 +1032,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com> static void mt753x_phylink_validate(struct dsa_switch *ds, int port, unsigned long *supported, -@@ -1548,7 +2345,8 @@ mt753x_phylink_validate(struct dsa_switc +@@ -1549,7 +2346,8 @@ mt753x_phylink_validate(struct dsa_switc phylink_set_port_modes(mask); @@ -1042,7 +1042,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com> phylink_set(mask, 10baseT_Half); phylink_set(mask, 10baseT_Full); phylink_set(mask, 100baseT_Half); -@@ -1567,6 +2365,11 @@ mt753x_phylink_validate(struct dsa_switc +@@ -1568,6 +2366,11 @@ mt753x_phylink_validate(struct dsa_switc linkmode_and(supported, supported, mask); linkmode_and(state->advertising, state->advertising, mask); @@ -1054,7 +1054,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com> } static int -@@ -1657,6 +2460,63 @@ static int mt7530_set_mac_eee(struct dsa +@@ -1658,6 +2461,63 @@ static int mt7530_set_mac_eee(struct dsa return 0; } @@ -1118,7 +1118,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com> static int mt753x_phylink_mac_link_state(struct dsa_switch *ds, int port, struct phylink_link_state *state) -@@ -1710,13 +2570,14 @@ static const struct dsa_switch_ops mt753 +@@ -1711,13 +2571,14 @@ static const struct dsa_switch_ops mt753 .port_vlan_prepare = mt7530_port_vlan_prepare, .port_vlan_add = mt7530_port_vlan_add, .port_vlan_del = mt7530_port_vlan_del, @@ -1137,7 +1137,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com> .get_mac_eee = mt7530_get_mac_eee, .set_mac_eee = mt7530_set_mac_eee, }; -@@ -1744,11 +2605,26 @@ static const struct mt753x_info mt753x_t +@@ -1745,11 +2606,26 @@ static const struct mt753x_info mt753x_t .mac_port_get_state = mt7530_phylink_mac_link_state, .mac_port_config = mt7530_mac_config, }, diff --git a/target/linux/mediatek/patches-5.4/0900-bt-mtk-serial-fix.patch b/target/linux/mediatek/patches-5.4/0900-bt-mtk-serial-fix.patch index 12844c860f..872b2bad45 100644 --- a/target/linux/mediatek/patches-5.4/0900-bt-mtk-serial-fix.patch +++ b/target/linux/mediatek/patches-5.4/0900-bt-mtk-serial-fix.patch @@ -19,7 +19,7 @@ }, [PORT_NPCM] = { .name = "Nuvoton 16550", -@@ -2591,6 +2591,11 @@ serial8250_do_set_termios(struct uart_po +@@ -2597,6 +2597,11 @@ serial8250_do_set_termios(struct uart_po unsigned long flags; unsigned int baud, quot, frac = 0; diff --git a/target/linux/mvebu/patches-5.4/020-arm64-dts-marvell-armada-37xx-Set-pcie_reset_pin-to-.patch b/target/linux/mvebu/patches-5.4/020-arm64-dts-marvell-armada-37xx-Set-pcie_reset_pin-to-.patch index cd15b20ed1..dd75470b4d 100644 --- a/target/linux/mvebu/patches-5.4/020-arm64-dts-marvell-armada-37xx-Set-pcie_reset_pin-to-.patch +++ b/target/linux/mvebu/patches-5.4/020-arm64-dts-marvell-armada-37xx-Set-pcie_reset_pin-to-.patch @@ -69,7 +69,7 @@ Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> /* J6 */ --- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts -@@ -126,10 +126,6 @@ +@@ -127,10 +127,6 @@ }; }; diff --git a/target/linux/mvebu/patches-5.4/021-arm64-dts-marvell-armada-37xx-Move-PCIe-comphy-handl.patch b/target/linux/mvebu/patches-5.4/021-arm64-dts-marvell-armada-37xx-Move-PCIe-comphy-handl.patch index b42192d9fd..b851a39a39 100644 --- a/target/linux/mvebu/patches-5.4/021-arm64-dts-marvell-armada-37xx-Move-PCIe-comphy-handl.patch +++ b/target/linux/mvebu/patches-5.4/021-arm64-dts-marvell-armada-37xx-Move-PCIe-comphy-handl.patch @@ -37,7 +37,7 @@ Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>; --- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts -@@ -132,7 +132,6 @@ +@@ -133,7 +133,6 @@ status = "okay"; max-link-speed = <2>; reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>; diff --git a/target/linux/mvebu/patches-5.4/022-arm64-dts-marvell-armada-37xx-Move-PCIe-max-link-spe.patch b/target/linux/mvebu/patches-5.4/022-arm64-dts-marvell-armada-37xx-Move-PCIe-max-link-spe.patch index 43cda3f29f..4442a5ac15 100644 --- a/target/linux/mvebu/patches-5.4/022-arm64-dts-marvell-armada-37xx-Move-PCIe-max-link-spe.patch +++ b/target/linux/mvebu/patches-5.4/022-arm64-dts-marvell-armada-37xx-Move-PCIe-max-link-spe.patch @@ -24,7 +24,7 @@ Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> --- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts -@@ -130,7 +130,6 @@ +@@ -131,7 +131,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>; status = "okay"; diff --git a/target/linux/mvebu/patches-5.4/801-pci-mvebu-time-out-reset-on-link-up.patch b/target/linux/mvebu/patches-5.4/801-pci-mvebu-time-out-reset-on-link-up.patch index 4058dc8ed5..49ea3de0d1 100644 --- a/target/linux/mvebu/patches-5.4/801-pci-mvebu-time-out-reset-on-link-up.patch +++ b/target/linux/mvebu/patches-5.4/801-pci-mvebu-time-out-reset-on-link-up.patch @@ -13,7 +13,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> --- a/drivers/pci/controller/pci-mvebu.c +++ b/drivers/pci/controller/pci-mvebu.c -@@ -928,6 +928,7 @@ static int mvebu_pcie_powerup(struct mve +@@ -936,6 +936,7 @@ static int mvebu_pcie_powerup(struct mve if (port->reset_gpio) { u32 reset_udelay = PCI_PM_D3COLD_WAIT * 1000; @@ -21,7 +21,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> of_property_read_u32(port->dn, "reset-delay-us", &reset_udelay); -@@ -935,7 +936,13 @@ static int mvebu_pcie_powerup(struct mve +@@ -943,7 +944,13 @@ static int mvebu_pcie_powerup(struct mve udelay(100); gpiod_set_value_cansleep(port->reset_gpio, 0); @@ -36,7 +36,7 @@ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> } return 0; -@@ -1099,15 +1106,16 @@ static int mvebu_pcie_probe(struct platf +@@ -1107,15 +1114,16 @@ static int mvebu_pcie_probe(struct platf if (!child) continue; diff --git a/target/linux/rockchip/patches-5.4/002-net-usb-r8152-add-LED-configuration-from-OF.patch b/target/linux/rockchip/patches-5.4/002-net-usb-r8152-add-LED-configuration-from-OF.patch index 69b5000177..a96661c968 100644 --- a/target/linux/rockchip/patches-5.4/002-net-usb-r8152-add-LED-configuration-from-OF.patch +++ b/target/linux/rockchip/patches-5.4/002-net-usb-r8152-add-LED-configuration-from-OF.patch @@ -22,7 +22,7 @@ Signed-off-by: David Bauer <mail@david-bauer.net> #include <linux/crc32.h> #include <linux/if_vlan.h> #include <linux/uaccess.h> -@@ -4335,6 +4336,22 @@ static void rtl_tally_reset(struct r8152 +@@ -4336,6 +4337,22 @@ static void rtl_tally_reset(struct r8152 ocp_write_word(tp, MCU_TYPE_PLA, PLA_RSTTALLY, ocp_data); } @@ -45,7 +45,7 @@ Signed-off-by: David Bauer <mail@david-bauer.net> static void r8152b_init(struct r8152 *tp) { u32 ocp_data; -@@ -4376,6 +4393,8 @@ static void r8152b_init(struct r8152 *tp +@@ -4377,6 +4394,8 @@ static void r8152b_init(struct r8152 *tp ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL); ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN); ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data); @@ -54,7 +54,7 @@ Signed-off-by: David Bauer <mail@david-bauer.net> } static void r8153_init(struct r8152 *tp) -@@ -4510,6 +4529,8 @@ static void r8153_init(struct r8152 *tp) +@@ -4511,6 +4530,8 @@ static void r8153_init(struct r8152 *tp) tp->coalesce = COALESCE_SLOW; break; } @@ -63,7 +63,7 @@ Signed-off-by: David Bauer <mail@david-bauer.net> } static void r8153b_init(struct r8152 *tp) -@@ -4586,6 +4607,8 @@ static void r8153b_init(struct r8152 *tp +@@ -4587,6 +4608,8 @@ static void r8153b_init(struct r8152 *tp rtl_tally_reset(tp); tp->coalesce = 15000; /* 15 us */ diff --git a/target/linux/x86/patches-5.4/012-pcengines-apu2-detect-apuv4-board.patch b/target/linux/x86/patches-5.4/012-pcengines-apu2-detect-apuv4-board.patch index 1be9a60229..f62617f992 100644 --- a/target/linux/x86/patches-5.4/012-pcengines-apu2-detect-apuv4-board.patch +++ b/target/linux/x86/patches-5.4/012-pcengines-apu2-detect-apuv4-board.patch @@ -14,7 +14,7 @@ Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> --- a/drivers/platform/x86/pcengines-apuv2.c +++ b/drivers/platform/x86/pcengines-apuv2.c -@@ -186,6 +186,33 @@ static const struct dmi_system_id apu_gp +@@ -188,6 +188,33 @@ static const struct dmi_system_id apu_gp }, .driver_data = (void *)&board_apu2, }, |