diff options
Diffstat (limited to 'target/linux')
3 files changed, 237 insertions, 0 deletions
diff --git a/target/linux/generic/backport-4.14/100-arm-cns3xxx-fix-writing-to-wrong-PCI-registers-after.patch b/target/linux/generic/backport-4.14/100-arm-cns3xxx-fix-writing-to-wrong-PCI-registers-after.patch new file mode 100644 index 0000000000..458515a0b5 --- /dev/null +++ b/target/linux/generic/backport-4.14/100-arm-cns3xxx-fix-writing-to-wrong-PCI-registers-after.patch @@ -0,0 +1,79 @@ +From 03556dab1cb02d85b50d7be3ee3a3bac001f5991 Mon Sep 17 00:00:00 2001 +From: Koen Vandeputte <koen.vandeputte@ncentric.com> +Date: Tue, 18 Dec 2018 12:14:06 +0100 +Subject: [PATCH] arm: cns3xxx: fix writing to wrong PCI registers after + alignment + +Originally, cns3xxx used it's own functions for mapping, reading and writing registers. + +Commit 802b7c06adc7 ("ARM: cns3xxx: Convert PCI to use generic config accessors") +removed the internal PCI config write function in favor of the generic one: + +cns3xxx_pci_write_config() --> pci_generic_config_write() + +cns3xxx_pci_write_config() expected aligned addresses, being produced by cns3xxx_pci_map_bus() +while the generic one pci_generic_config_write() actually expects the real address +as both the function and hardware are capable of byte-aligned writes. + +This currently leads to pci_generic_config_write() writing +to the wrong registers on some ocasions. + +First issue seen due to this: + +- driver ath9k gets loaded +- The driver wants to write value 0xA8 to register PCI_LATENCY_TIMER, located at 0x0D +- cns3xxx_pci_map_bus() aligns the address to 0x0C +- pci_generic_config_write() effectively writes 0xA8 into register 0x0C (CACHE_LINE_SIZE) + +This seems to cause some slight instability when certain PCI devices are used. + +Another issue example caused by this this is the PCI bus numbering, +where the primary bus is higher than the secondary, which is impossible. + +Before: + +00:00.0 PCI bridge: Cavium, Inc. Device 3400 (rev 01) (prog-if 00 [Normal decode]) + Flags: bus master, fast devsel, latency 0, IRQ 255 + Bus: primary=02, secondary=01, subordinate=ff, sec-latency=0 + +After fix: + +00:00.0 PCI bridge: Cavium, Inc. Device 3400 (rev 01) (prog-if 00 [Normal decode]) + Flags: bus master, fast devsel, latency 0, IRQ 255 + Bus: primary=00, secondary=01, subordinate=02, sec-latency=0 + +And very likely some more .. + +Fix all by omitting the alignment being done in the mapping function. + +Fixes: 802b7c06adc7 ("ARM: cns3xxx: Convert PCI to use generic config accessors") +Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> +CC: Arnd Bergmann <arnd@arndb.de> +CC: Bjorn Helgaas <bhelgaas@google.com> +CC: Krzysztof Halasa <khalasa@piap.pl> +CC: Olof Johansson <olof@lixom.net> +CC: Robin Leblon <robin.leblon@ncentric.com> +CC: Rob Herring <robh@kernel.org> +CC: Russell King <linux@armlinux.org.uk> +CC: Tim Harvey <tharvey@gateworks.com> +CC: stable@vger.kernel.org # v4.0+ +--- + arch/arm/mach-cns3xxx/pcie.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/arch/arm/mach-cns3xxx/pcie.c b/arch/arm/mach-cns3xxx/pcie.c +index 318394ed5c7a..5e11ad3164e0 100644 +--- a/arch/arm/mach-cns3xxx/pcie.c ++++ b/arch/arm/mach-cns3xxx/pcie.c +@@ -83,7 +83,7 @@ static void __iomem *cns3xxx_pci_map_bus(struct pci_bus *bus, + } else /* remote PCI bus */ + base = cnspci->cfg1_regs + ((busno & 0xf) << 20); + +- return base + (where & 0xffc) + (devfn << 12); ++ return base + where + (devfn << 12); + } + + static int cns3xxx_pci_read_config(struct pci_bus *bus, unsigned int devfn, +-- +2.17.1 + diff --git a/target/linux/generic/backport-4.19/100-arm-cns3xxx-fix-writing-to-wrong-PCI-registers-after.patch b/target/linux/generic/backport-4.19/100-arm-cns3xxx-fix-writing-to-wrong-PCI-registers-after.patch new file mode 100644 index 0000000000..458515a0b5 --- /dev/null +++ b/target/linux/generic/backport-4.19/100-arm-cns3xxx-fix-writing-to-wrong-PCI-registers-after.patch @@ -0,0 +1,79 @@ +From 03556dab1cb02d85b50d7be3ee3a3bac001f5991 Mon Sep 17 00:00:00 2001 +From: Koen Vandeputte <koen.vandeputte@ncentric.com> +Date: Tue, 18 Dec 2018 12:14:06 +0100 +Subject: [PATCH] arm: cns3xxx: fix writing to wrong PCI registers after + alignment + +Originally, cns3xxx used it's own functions for mapping, reading and writing registers. + +Commit 802b7c06adc7 ("ARM: cns3xxx: Convert PCI to use generic config accessors") +removed the internal PCI config write function in favor of the generic one: + +cns3xxx_pci_write_config() --> pci_generic_config_write() + +cns3xxx_pci_write_config() expected aligned addresses, being produced by cns3xxx_pci_map_bus() +while the generic one pci_generic_config_write() actually expects the real address +as both the function and hardware are capable of byte-aligned writes. + +This currently leads to pci_generic_config_write() writing +to the wrong registers on some ocasions. + +First issue seen due to this: + +- driver ath9k gets loaded +- The driver wants to write value 0xA8 to register PCI_LATENCY_TIMER, located at 0x0D +- cns3xxx_pci_map_bus() aligns the address to 0x0C +- pci_generic_config_write() effectively writes 0xA8 into register 0x0C (CACHE_LINE_SIZE) + +This seems to cause some slight instability when certain PCI devices are used. + +Another issue example caused by this this is the PCI bus numbering, +where the primary bus is higher than the secondary, which is impossible. + +Before: + +00:00.0 PCI bridge: Cavium, Inc. Device 3400 (rev 01) (prog-if 00 [Normal decode]) + Flags: bus master, fast devsel, latency 0, IRQ 255 + Bus: primary=02, secondary=01, subordinate=ff, sec-latency=0 + +After fix: + +00:00.0 PCI bridge: Cavium, Inc. Device 3400 (rev 01) (prog-if 00 [Normal decode]) + Flags: bus master, fast devsel, latency 0, IRQ 255 + Bus: primary=00, secondary=01, subordinate=02, sec-latency=0 + +And very likely some more .. + +Fix all by omitting the alignment being done in the mapping function. + +Fixes: 802b7c06adc7 ("ARM: cns3xxx: Convert PCI to use generic config accessors") +Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> +CC: Arnd Bergmann <arnd@arndb.de> +CC: Bjorn Helgaas <bhelgaas@google.com> +CC: Krzysztof Halasa <khalasa@piap.pl> +CC: Olof Johansson <olof@lixom.net> +CC: Robin Leblon <robin.leblon@ncentric.com> +CC: Rob Herring <robh@kernel.org> +CC: Russell King <linux@armlinux.org.uk> +CC: Tim Harvey <tharvey@gateworks.com> +CC: stable@vger.kernel.org # v4.0+ +--- + arch/arm/mach-cns3xxx/pcie.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/arch/arm/mach-cns3xxx/pcie.c b/arch/arm/mach-cns3xxx/pcie.c +index 318394ed5c7a..5e11ad3164e0 100644 +--- a/arch/arm/mach-cns3xxx/pcie.c ++++ b/arch/arm/mach-cns3xxx/pcie.c +@@ -83,7 +83,7 @@ static void __iomem *cns3xxx_pci_map_bus(struct pci_bus *bus, + } else /* remote PCI bus */ + base = cnspci->cfg1_regs + ((busno & 0xf) << 20); + +- return base + (where & 0xffc) + (devfn << 12); ++ return base + where + (devfn << 12); + } + + static int cns3xxx_pci_read_config(struct pci_bus *bus, unsigned int devfn, +-- +2.17.1 + diff --git a/target/linux/generic/backport-4.9/100-arm-cns3xxx-fix-writing-to-wrong-PCI-registers-after.patch b/target/linux/generic/backport-4.9/100-arm-cns3xxx-fix-writing-to-wrong-PCI-registers-after.patch new file mode 100644 index 0000000000..458515a0b5 --- /dev/null +++ b/target/linux/generic/backport-4.9/100-arm-cns3xxx-fix-writing-to-wrong-PCI-registers-after.patch @@ -0,0 +1,79 @@ +From 03556dab1cb02d85b50d7be3ee3a3bac001f5991 Mon Sep 17 00:00:00 2001 +From: Koen Vandeputte <koen.vandeputte@ncentric.com> +Date: Tue, 18 Dec 2018 12:14:06 +0100 +Subject: [PATCH] arm: cns3xxx: fix writing to wrong PCI registers after + alignment + +Originally, cns3xxx used it's own functions for mapping, reading and writing registers. + +Commit 802b7c06adc7 ("ARM: cns3xxx: Convert PCI to use generic config accessors") +removed the internal PCI config write function in favor of the generic one: + +cns3xxx_pci_write_config() --> pci_generic_config_write() + +cns3xxx_pci_write_config() expected aligned addresses, being produced by cns3xxx_pci_map_bus() +while the generic one pci_generic_config_write() actually expects the real address +as both the function and hardware are capable of byte-aligned writes. + +This currently leads to pci_generic_config_write() writing +to the wrong registers on some ocasions. + +First issue seen due to this: + +- driver ath9k gets loaded +- The driver wants to write value 0xA8 to register PCI_LATENCY_TIMER, located at 0x0D +- cns3xxx_pci_map_bus() aligns the address to 0x0C +- pci_generic_config_write() effectively writes 0xA8 into register 0x0C (CACHE_LINE_SIZE) + +This seems to cause some slight instability when certain PCI devices are used. + +Another issue example caused by this this is the PCI bus numbering, +where the primary bus is higher than the secondary, which is impossible. + +Before: + +00:00.0 PCI bridge: Cavium, Inc. Device 3400 (rev 01) (prog-if 00 [Normal decode]) + Flags: bus master, fast devsel, latency 0, IRQ 255 + Bus: primary=02, secondary=01, subordinate=ff, sec-latency=0 + +After fix: + +00:00.0 PCI bridge: Cavium, Inc. Device 3400 (rev 01) (prog-if 00 [Normal decode]) + Flags: bus master, fast devsel, latency 0, IRQ 255 + Bus: primary=00, secondary=01, subordinate=02, sec-latency=0 + +And very likely some more .. + +Fix all by omitting the alignment being done in the mapping function. + +Fixes: 802b7c06adc7 ("ARM: cns3xxx: Convert PCI to use generic config accessors") +Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> +CC: Arnd Bergmann <arnd@arndb.de> +CC: Bjorn Helgaas <bhelgaas@google.com> +CC: Krzysztof Halasa <khalasa@piap.pl> +CC: Olof Johansson <olof@lixom.net> +CC: Robin Leblon <robin.leblon@ncentric.com> +CC: Rob Herring <robh@kernel.org> +CC: Russell King <linux@armlinux.org.uk> +CC: Tim Harvey <tharvey@gateworks.com> +CC: stable@vger.kernel.org # v4.0+ +--- + arch/arm/mach-cns3xxx/pcie.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/arch/arm/mach-cns3xxx/pcie.c b/arch/arm/mach-cns3xxx/pcie.c +index 318394ed5c7a..5e11ad3164e0 100644 +--- a/arch/arm/mach-cns3xxx/pcie.c ++++ b/arch/arm/mach-cns3xxx/pcie.c +@@ -83,7 +83,7 @@ static void __iomem *cns3xxx_pci_map_bus(struct pci_bus *bus, + } else /* remote PCI bus */ + base = cnspci->cfg1_regs + ((busno & 0xf) << 20); + +- return base + (where & 0xffc) + (devfn << 12); ++ return base + where + (devfn << 12); + } + + static int cns3xxx_pci_read_config(struct pci_bus *bus, unsigned int devfn, +-- +2.17.1 + |