diff options
Diffstat (limited to 'target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/wmix.h')
| -rw-r--r-- | target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/wmix.h | 233 |
1 files changed, 233 insertions, 0 deletions
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/wmix.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/wmix.h new file mode 100644 index 0000000000..8f12b5e558 --- /dev/null +++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/include/wmix.h @@ -0,0 +1,233 @@ +/* + * Copyright (c) 2004-2005 Atheros Communications Inc. + * All rights reserved. + * + * + * $ATH_LICENSE_HOSTSDK0_C$ + * + * This file contains extensions of the WMI protocol specified in the + * Wireless Module Interface (WMI). It includes definitions of all + * extended commands and events. Extensions include useful commands + * that are not directly related to wireless activities. They may + * be hardware-specific, and they might not be supported on all + * implementations. + * + * Extended WMIX commands are encapsulated in a WMI message with + * cmd=WMI_EXTENSION_CMD. + * + */ + +#ifndef _WMIX_H_ +#define _WMIX_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +#ifndef ATH_TARGET +#include "athstartpack.h" +#endif + +#include "dbglog.h" + +/* + * Extended WMI commands are those that are needed during wireless + * operation, but which are not really wireless commands. This allows, + * for instance, platform-specific commands. Extended WMI commands are + * embedded in a WMI command message with WMI_COMMAND_ID=WMI_EXTENSION_CMDID. + * Extended WMI events are similarly embedded in a WMI event message with + * WMI_EVENT_ID=WMI_EXTENSION_EVENTID. + */ +typedef PREPACK struct { + A_UINT32 commandId; +} POSTPACK WMIX_CMD_HDR; + +typedef enum { + WMIX_DSETOPEN_REPLY_CMDID = 0x2001, + WMIX_DSETDATA_REPLY_CMDID, + WMIX_GPIO_OUTPUT_SET_CMDID, + WMIX_GPIO_INPUT_GET_CMDID, + WMIX_GPIO_REGISTER_SET_CMDID, + WMIX_GPIO_REGISTER_GET_CMDID, + WMIX_GPIO_INTR_ACK_CMDID, + WMIX_HB_CHALLENGE_RESP_CMDID, + WMIX_DBGLOG_CFG_MODULE_CMDID, +} WMIX_COMMAND_ID; + +typedef enum { + WMIX_DSETOPENREQ_EVENTID = 0x3001, + WMIX_DSETCLOSE_EVENTID, + WMIX_DSETDATAREQ_EVENTID, + WMIX_GPIO_INTR_EVENTID, + WMIX_GPIO_DATA_EVENTID, + WMIX_GPIO_ACK_EVENTID, + WMIX_HB_CHALLENGE_RESP_EVENTID, + WMIX_DBGLOG_EVENTID, +} WMIX_EVENT_ID; + +/* + * =============DataSet support================= + */ + +/* + * WMIX_DSETOPENREQ_EVENTID + * DataSet Open Request Event + */ +typedef PREPACK struct { + A_UINT32 dset_id; + A_UINT32 targ_dset_handle; /* echo'ed, not used by Host, */ + A_UINT32 targ_reply_fn; /* echo'ed, not used by Host, */ + A_UINT32 targ_reply_arg; /* echo'ed, not used by Host, */ +} POSTPACK WMIX_DSETOPENREQ_EVENT; + +/* + * WMIX_DSETCLOSE_EVENTID + * DataSet Close Event + */ +typedef PREPACK struct { + A_UINT32 access_cookie; +} POSTPACK WMIX_DSETCLOSE_EVENT; + +/* + * WMIX_DSETDATAREQ_EVENTID + * DataSet Data Request Event + */ +typedef PREPACK struct { + A_UINT32 access_cookie; + A_UINT32 offset; + A_UINT32 length; + A_UINT32 targ_buf; /* echo'ed, not used by Host, */ + A_UINT32 targ_reply_fn; /* echo'ed, not used by Host, */ + A_UINT32 targ_reply_arg; /* echo'ed, not used by Host, */ +} POSTPACK WMIX_DSETDATAREQ_EVENT; + +typedef PREPACK struct { + A_UINT32 status; + A_UINT32 targ_dset_handle; + A_UINT32 targ_reply_fn; + A_UINT32 targ_reply_arg; + A_UINT32 access_cookie; + A_UINT32 size; + A_UINT32 version; +} POSTPACK WMIX_DSETOPEN_REPLY_CMD; + +typedef PREPACK struct { + A_UINT32 status; + A_UINT32 targ_buf; + A_UINT32 targ_reply_fn; + A_UINT32 targ_reply_arg; + A_UINT32 length; + A_UINT8 buf[1]; +} POSTPACK WMIX_DSETDATA_REPLY_CMD; + + +/* + * =============GPIO support================= + * All masks are 18-bit masks with bit N operating on GPIO pin N. + */ + +#include "gpio.h" + +/* + * Set GPIO pin output state. + * In order for output to be driven, a pin must be enabled for output. + * This can be done during initialization through the GPIO Configuration + * DataSet, or during operation with the enable_mask. + * + * If a request is made to simultaneously set/clear or set/disable or + * clear/disable or disable/enable, results are undefined. + */ +typedef PREPACK struct { + A_UINT32 set_mask; /* pins to set */ + A_UINT32 clear_mask; /* pins to clear */ + A_UINT32 enable_mask; /* pins to enable for output */ + A_UINT32 disable_mask; /* pins to disable/tristate */ +} POSTPACK WMIX_GPIO_OUTPUT_SET_CMD; + +/* + * Set a GPIO register. For debug/exceptional cases. + * Values for gpioreg_id are GPIO_REGISTER_IDs, defined in a + * platform-dependent header. + */ +typedef PREPACK struct { + A_UINT32 gpioreg_id; /* GPIO register ID */ + A_UINT32 value; /* value to write */ +} POSTPACK WMIX_GPIO_REGISTER_SET_CMD; + +/* Get a GPIO register. For debug/exceptional cases. */ +typedef PREPACK struct { + A_UINT32 gpioreg_id; /* GPIO register to read */ +} POSTPACK WMIX_GPIO_REGISTER_GET_CMD; + +/* + * Host acknowledges and re-arms GPIO interrupts. A single + * message should be used to acknowledge all interrupts that + * were delivered in an earlier WMIX_GPIO_INTR_EVENT message. + */ +typedef PREPACK struct { + A_UINT32 ack_mask; /* interrupts to acknowledge */ +} POSTPACK WMIX_GPIO_INTR_ACK_CMD; + +/* + * Target informs Host of GPIO interrupts that have ocurred since the + * last WMIX_GIPO_INTR_ACK_CMD was received. Additional information -- + * the current GPIO input values is provided -- in order to support + * use of a GPIO interrupt as a Data Valid signal for other GPIO pins. + */ +typedef PREPACK struct { + A_UINT32 intr_mask; /* pending GPIO interrupts */ + A_UINT32 input_values; /* recent GPIO input values */ +} POSTPACK WMIX_GPIO_INTR_EVENT; + +/* + * Target responds to Host's earlier WMIX_GPIO_INPUT_GET_CMDID request + * using a GPIO_DATA_EVENT with + * value set to the mask of GPIO pin inputs and + * reg_id set to GPIO_ID_NONE + * + * + * Target responds to Hosts's earlier WMIX_GPIO_REGISTER_GET_CMDID request + * using a GPIO_DATA_EVENT with + * value set to the value of the requested register and + * reg_id identifying the register (reflects the original request) + * NB: reg_id supports the future possibility of unsolicited + * WMIX_GPIO_DATA_EVENTs (for polling GPIO input), and it may + * simplify Host GPIO support. + */ +typedef PREPACK struct { + A_UINT32 value; + A_UINT32 reg_id; +} POSTPACK WMIX_GPIO_DATA_EVENT; + +/* + * =============Error Detection support================= + */ + +/* + * WMIX_HB_CHALLENGE_RESP_CMDID + * Heartbeat Challenge Response command + */ +typedef PREPACK struct { + A_UINT32 cookie; + A_UINT32 source; +} POSTPACK WMIX_HB_CHALLENGE_RESP_CMD; + +/* + * WMIX_HB_CHALLENGE_RESP_EVENTID + * Heartbeat Challenge Response Event + */ +#define WMIX_HB_CHALLENGE_RESP_EVENT WMIX_HB_CHALLENGE_RESP_CMD + +typedef PREPACK struct { + struct dbglog_config_s config; +} POSTPACK WMIX_DBGLOG_CFG_MODULE_CMD; + +#ifndef ATH_TARGET +#include "athendpack.h" +#endif + +#ifdef __cplusplus +} +#endif + +#endif /* _WMIX_H_ */ |