1 files changed, 0 insertions, 133 deletions
diff --git a/target/linux/realtek/dts-5.10/rtl8380_panasonic_m8eg-pn28080k.dts b/target/linux/realtek/dts-5.10/rtl8380_panasonic_m8eg-pn28080k.dts
deleted file mode 100644
index f9d58f5b66..0000000000
--- a/target/linux/realtek/dts-5.10/rtl8380_panasonic_m8eg-pn28080k.dts
+++ /dev/null
@@ -1,133 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "rtl838x.dtsi"
-#include "rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi"
-
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "panasonic,m8eg-pn28080k", "realtek,rtl8380-soc";
-	model = "Panasonic Switch-M8eG PN28080K";
-
-	aliases {
-		led-boot = &led_status_eco_green;
-		led-failsafe = &led_status_eco_amber;
-		led-running = &led_status_eco_green;
-		led-upgrade = &led_status_eco_green;
-	};
-
-	sfp0: sfp-p9 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c0>;
-		tx-fault-gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
-		tx-disable-gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
-		los-gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&leds {
-	led_status_eco_amber: led-5 {
-		label = "amber:status_eco";
-		gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-		color = <LED_COLOR_ID_AMBER>;
-		function = LED_FUNCTION_STATUS;
-		function-enumerator = <1>;
-	};
-
-	led_status_eco_green: led-6 {
-		label = "green:status_eco";
-		gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-		color = <LED_COLOR_ID_GREEN>;
-		function = LED_FUNCTION_STATUS;
-		function-enumerator = <2>;
-	};
-};
-
-&i2c_gpio_0 {
-	scl-gpios = <&gpio0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-};
-
-&i2c_gpio_1 {
-	scl-gpios = <&gpio0 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio0 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-};
-
-&gpio1 {
-	interrupt-controller;
-	#interrupt-cells = <2>;
-	interrupt-parent = <&gpio0>;
-	interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
-};
-
-&gpio2 {
-	interrupt-controller;
-	#interrupt-cells = <2>;
-	interrupt-parent = <&gpio0>;
-	interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
-};
-
-&i2c_switch {
-	i2c0: i2c@0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0>;
-	};
-};
-
-&ethernet0 {
-	mdio-bus {
-		compatible = "realtek,rtl838x-mdio";
-		regmap = <&ethernet0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		INTERNAL_PHY(8)
-		INTERNAL_PHY(9)
-		INTERNAL_PHY(10)
-		INTERNAL_PHY(11)
-		INTERNAL_PHY(12)
-		INTERNAL_PHY(13)
-		INTERNAL_PHY(14)
-		INTERNAL_PHY(15)
-
-		INTERNAL_PHY(24)
-	};
-};
-
-&switch0 {
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		SWITCH_PORT(8, 1, internal)
-		SWITCH_PORT(9, 2, internal)
-		SWITCH_PORT(10, 3, internal)
-		SWITCH_PORT(11, 4, internal)
-		SWITCH_PORT(12, 5, internal)
-		SWITCH_PORT(13, 6, internal)
-		SWITCH_PORT(14, 7, internal)
-		SWITCH_PORT(15, 8, internal)
-
-		port@24 {
-			reg = <24>;
-			label = "lan9";
-			phy-mode = "1000base-x";
-			phy-handle = <&phy24>;
-			managed = "in-band-status";
-			sfp = <&sfp0>;
-		};
-
-		port@28 {
-			ethernet = <&ethernet0>;
-			reg = <28>;
-			phy-mode = "internal";
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-	};
-};