1 files changed, 0 insertions, 113 deletions
diff --git a/target/linux/realtek/dts-5.10/rtl8380_hpe_1920-8g.dts b/target/linux/realtek/dts-5.10/rtl8380_hpe_1920-8g.dts
deleted file mode 100644
index b51c75f355..0000000000
--- a/target/linux/realtek/dts-5.10/rtl8380_hpe_1920-8g.dts
+++ /dev/null
@@ -1,113 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "rtl838x.dtsi"
-#include "rtl838x_hpe_1920.dtsi"
-
-/ {
-	compatible = "hpe,1920-8g", "realtek,rtl838x-soc";
-	model = "HPE 1920-8G (JG920A)";
-
-	gpio1: rtl8231-gpio {
-		compatible = "realtek,rtl8231-gpio";
-		#gpio-cells = <2>;
-		gpio-controller;
-		indirect-access-bus-id = <0>;
-	};
-
-	i2c0: i2c-gpio-0 {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpio1 23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpio1 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	sfp0: sfp-0 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c0>;
-		los-gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&gpio1 25 GPIO_ACTIVE_LOW>;
-		// tx-fault and tx-disable unconnected
-	};
-
-	i2c1: i2c-gpio-1 {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpio1 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpio1 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	sfp1: sfp-1 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c1>;
-		los-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&gpio1 21 GPIO_ACTIVE_LOW>;
-		// tx-fault and tx-disable unconnected
-	};
-};
-
-&ethernet0 {
-	mdio: mdio-bus {
-		compatible = "realtek,rtl838x-mdio";
-		regmap = <&ethernet0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		INTERNAL_PHY(8)
-		INTERNAL_PHY(9)
-		INTERNAL_PHY(10)
-		INTERNAL_PHY(11)
-		INTERNAL_PHY(12)
-		INTERNAL_PHY(13)
-		INTERNAL_PHY(14)
-		INTERNAL_PHY(15)
-
-		INTERNAL_PHY(24)
-		INTERNAL_PHY(26)
-	};
-};
-
-&switch0 {
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		SWITCH_PORT(8, 1, internal)
-		SWITCH_PORT(9, 2, internal)
-		SWITCH_PORT(10, 3, internal)
-		SWITCH_PORT(11, 4, internal)
-		SWITCH_PORT(12, 5, internal)
-		SWITCH_PORT(13, 6, internal)
-		SWITCH_PORT(14, 7, internal)
-		SWITCH_PORT(15, 8, internal)
-
-		port@24 {
-			reg = <24>;
-			label = "lan9";
-			phy-mode = "1000base-x";
-			managed = "in-band-status";
-			sfp = <&sfp0>;
-		};
-
-		port@26 {
-			reg = <26>;
-			label = "lan10";
-			phy-mode = "1000base-x";
-			managed = "in-band-status";
-			sfp = <&sfp1>;
-		};
-
-		port@28 {
-			ethernet = <&ethernet0>;
-			reg = <28>;
-			phy-mode = "internal";
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-	};
-};