1 files changed, 0 insertions, 59 deletions
diff --git a/target/linux/ramips/patches-4.9/0026-DT-Add-documentation-for-gpio-ralink.patch b/target/linux/ramips/patches-4.9/0026-DT-Add-documentation-for-gpio-ralink.patch
deleted file mode 100644
index 7d5f98f647..0000000000
--- a/target/linux/ramips/patches-4.9/0026-DT-Add-documentation-for-gpio-ralink.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From d410e5478c622c01fcf31427533df5f433df9146 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 28 Jul 2013 19:45:30 +0200
-Subject: [PATCH 26/53] DT: Add documentation for gpio-ralink
-
-Describe gpio-ralink binding.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
-Cc: linux-mips@linux-mips.org
-Cc: devicetree@vger.kernel.org
-Cc: linux-gpio@vger.kernel.org
----
- .../devicetree/bindings/gpio/gpio-ralink.txt       |   40 ++++++++++++++++++++
- 1 file changed, 40 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/gpio/gpio-ralink.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/gpio/gpio-ralink.txt
-@@ -0,0 +1,40 @@
-+Ralink SoC GPIO controller bindings
-+
-+Required properties:
-+- compatible:
-+  - "ralink,rt2880-gpio" for Ralink controllers
-+- #gpio-cells : Should be two.
-+  - first cell is the pin number
-+  - second cell is used to specify optional parameters (unused)
-+- gpio-controller : Marks the device node as a GPIO controller
-+- reg : Physical base address and length of the controller's registers
-+- interrupt-parent: phandle to the INTC device node
-+- interrupts : Specify the INTC interrupt number
-+- ralink,num-gpios : Specify the number of GPIOs
-+- ralink,register-map : The register layout depends on the GPIO bank and actual
-+		SoC type. Register offsets need to be in this order.
-+		[ INT, EDGE, RENA, FENA, DATA, DIR, POL, SET, RESET, TOGGLE ]
-+
-+Optional properties:
-+- ralink,gpio-base : Specify the GPIO chips base number
-+
-+Example:
-+
-+	gpio0: gpio@600 {
-+		compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio";
-+
-+		#gpio-cells = <2>;
-+		gpio-controller;
-+
-+		reg = <0x600 0x34>;
-+
-+		interrupt-parent = <&intc>;
-+		interrupts = <6>;
-+
-+		ralink,gpio-base = <0>;
-+		ralink,num-gpios = <24>;
-+		ralink,register-map = [ 00 04 08 0c
-+				20 24 28 2c
-+				30 34 ];
-+
-+	};