1 files changed, 116 insertions, 0 deletions
diff --git a/target/linux/ramips/dts/rt2880_airlink101_ar670w.dts b/target/linux/ramips/dts/rt2880_airlink101_ar670w.dts
new file mode 100644
index 0000000000..96e4a8cbe2
--- /dev/null
+++ b/target/linux/ramips/dts/rt2880_airlink101_ar670w.dts
@@ -0,0 +1,116 @@
+/dts-v1/;
+
+#include "rt2880.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "airlink101,ar670w", "ralink,rt2880-soc";
+	model = "Airlink101 AR670W";
+
+	aliases {
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	cfi@bdc00000 {
+		compatible = "cfi-flash";
+		reg = <0xbc400000 0x800000>;
+		bank-width = <2>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				reg = <0x0 0x30000>;
+				label = "u-boot";
+				read-only;
+			};
+
+			factory: partition@30000 {
+				reg = <0x30000 0x10000>;
+				label = "factory";
+				read-only;
+			};
+
+			partition@40000 {
+				compatible = "lzma";
+				reg = <0x40000 0x3c0000>;
+				label = "firmware";
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power: power {
+			label = "ar670w:green:power";
+			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+		};
+
+		wpsblue {
+			label = "ar670w:blue:wps";
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		wps {
+			label = "wps";
+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&pinctrl {
+	state_default: pinctrl0 {
+		gpio {
+			ralink,group = "i2c", "spi", "uartlite";
+			ralink,function = "gpio";
+		};
+	};
+};
+
+&ethernet {
+	status = "okay";
+	mtd-mac-address = <&factory 0x2004>;
+
+	port@0 {
+		phy-handle = <&phy0>;
+		phy-mode = "mii";
+	};
+
+	mdio-bus {
+		status = "okay";
+
+		phy0: ethernet-phy@0 {
+			phy-mode = "mii";
+			reg = <0>;
+		};
+	};
+};
+
+&wmac {
+	status = "okay";
+	ralink,mtd-eeprom = <&factory 0x2000>;
+};