diff options
Diffstat (limited to 'target/linux/ipq807x/files')
| -rw-r--r-- | target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8072-301w.dts | 410 |
1 files changed, 410 insertions, 0 deletions
diff --git a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8072-301w.dts b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8072-301w.dts new file mode 100644 index 0000000000..d3e788a36c --- /dev/null +++ b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8072-301w.dts @@ -0,0 +1,410 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* Copyright (c) 2021, Dirk Buchwalder <buchwalder@posteo.de> */ + +/dts-v1/; + +#include "ipq8074.dtsi" +#include "ipq8074-hk-cpu.dtsi" +#include "ipq8074-ess.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "QNAP 301w"; + compatible = "qnap,301w", "qcom,ipq8074"; + + aliases { + serial0 = &blsp1_uart5; + /* + * Aliases as required by u-boot + * to patch MAC addresses + */ + led-boot = &led_system_red; + led-failsafe = &led_system_red; + led-running = &led_pwr_green; + led-upgrade = &led_system_red; + ethernet0 = &dp1; + ethernet1 = &dp2; + ethernet2 = &dp3; + ethernet3 = &dp4; + ethernet4 = &dp5; + ethernet5 = &dp6_syn; + label-mac-device = &dp1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + keys { + compatible = "gpio-keys"; + pinctrl-0 = <&button_pins>; + pinctrl-names = "default"; + + wps-button { + label = "wps"; + gpios = <&tlmm 57 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + + reset-button { + label = "reset"; + gpios = <&tlmm 67 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&leds_pins>; + pinctrl-names = "default"; + + led_system_green: led-system-green { + label = "green:system"; + gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_GREEN>; + }; + + led_system_red: led-system-red { + label = "red:system"; + gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_RED>; + }; + + led_pwr_green: led-pwr-green { + label = "green:pwr"; + gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_GREEN>; + }; + + led-wifi-green { + label = "green:wifi"; + gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_GREEN>; + }; + + led-lan4-green { + label = "green:lan4"; + gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_GREEN>; + }; + + led-lan4-amber { + label = "amber:lan4"; + gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_AMBER>; + }; + + led-lan3-green { + label = "green:lan3"; + gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_GREEN>; + }; + + led-lan3-amber { + label = "amber:lan3"; + gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_AMBER>; + }; + + led-lan2-green { + label = "green:lan2"; + gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_GREEN>; + }; + + led-lan2-amber { + label = "amber:lan2"; + gpios = <&tlmm 13 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_AMBER>; + }; + + led-lan1-green { + label = "green:lan1"; + gpios = <&tlmm 14 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_GREEN>; + }; + + led-lan1-amber { + label = "amber:lan1"; + gpios = <&tlmm 15 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_AMBER>; + }; + + led-10g-1-green { + label = "green:10g_1"; + gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_GREEN>; + }; + + led-10g-1-amber { + label = "amber:10g_1"; + gpios = <&tlmm 56 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_AMBER>; + }; + + led-10g-2-green { + label = "green:10g_2"; + gpios = <&tlmm 51 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_GREEN>; + }; + + led-10g-2-amber { + label = "amber:10g_2"; + gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_AMBER>; + }; + }; +}; + +&tlmm { + + mdio_pins: mdio-state { + mdc-pins { + pins = "gpio68"; + function = "mdc"; + drive-strength = <8>; + bias-pull-up; + }; + + mdio-pins { + pins = "gpio69"; + function = "mdio"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + button_pins: button-state { + wps-pins { + pins = "gpio57"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + rst-pins { + pins = "gpio67"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + leds_pins: leds-state { + pins = "gpio1", "gpio3", "gpio4", "gpio6", "gpio7", "gpio8", + "gpio11", "gpio12", "gpio13", "gpio14", "gpio15", "gpio42", + "gpio51", "gpio52", "gpio54", "gpio56"; + function = "gpio"; + drive-strength = <8>; + bias-pull-down; + }; +}; + +&blsp1_uart5 { + status = "okay"; +}; + +&prng { + status = "okay"; +}; + +&ssphy_0 { + status = "okay"; +}; + +&qusb_phy_0 { + status = "okay"; +}; + +&ssphy_1 { + status = "okay"; +}; + +&qusb_phy_1 { + status = "okay"; +}; + +&usb_0 { + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&cryptobam { + status = "okay"; +}; + +&crypto { + status = "okay"; +}; + +&qpic_bam { + status = "okay"; +}; + +&blsp1_spi1 { /* BLSP1 QUP1 */ + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + cs-gpios = <0>; + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + + partitions { + compatible = "qcom,smem-part"; + }; + }; +}; + +&mdio { + status = "okay"; + + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + reset-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>; + + aqr113c_0: ethernet-phy@0 { + compatible ="ethernet-phy-ieee802.3-c45"; + reg = <0>; + reset-gpios = <&tlmm 59 GPIO_ACTIVE_LOW>; + }; + + aqr113c_8: ethernet-phy@8 { + compatible ="ethernet-phy-ieee802.3-c45"; + reg = <8>; + reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>; + }; + + qca8075_16: ethernet-phy@16 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <16>; + }; + + qca8075_17: ethernet-phy@17 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <17>; + }; + + qca8075_18: ethernet-phy@18 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <18>; + }; + + qca8075_19: ethernet-phy@19 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <19>; + }; +}; + +&sdhc_1 { + status = "okay"; + + /* According to the stock dts from the QNAP gpl drop + * the emmc has a problem with the hs400 > hs200 speed switch. + * Therefore remove the mmc-hs400-1_8v property + */ + /delete-property/ mmc-hs400-1_8v; + mmc-hs200-1_8v; + mmc-ddr-1_8v; + vqmmc-supply = <&l11>; +}; + +&switch { + status = "okay"; + + switch_cpu_bmp = <0x1>; /* cpu port bitmap */ + switch_lan_bmp = <0x3e>; /* lan port bitmap */ + switch_wan_bmp = <0xc0>; /* wan port bitmap */ + switch_mac_mode = <0xb>; /* mac mode for uniphy instance0*/ + switch_mac_mode1 = <0xd>; /* mac mode for uniphy instance1*/ + switch_mac_mode2 = <0xd>; /* mac mode for uniphy instance2*/ + bm_tick_mode = <0>; /* bm tick mode */ + tm_tick_mode = <0>; /* tm tick mode */ + + qcom,port_phyinfo { + port@0 { + port_id = <1>; + phy_address = <16>; + }; + port@1 { + port_id = <2>; + phy_address = <17>; + }; + port@2 { + port_id = <3>; + phy_address = <18>; + }; + port@3 { + port_id = <4>; + phy_address = <19>; + }; + port@4 { + port_id = <5>; + phy_address = <8>; + compatible = "ethernet-phy-ieee802.3-c45"; + ethernet-phy-ieee802.3-c45; + }; + port@5 { + port_id = <6>; + phy_address = <0>; + compatible = "ethernet-phy-ieee802.3-c45"; + ethernet-phy-ieee802.3-c45; + }; + }; +}; + +&edma { + status = "okay"; +}; + +&dp1 { + status = "okay"; + phy-handle = <&qca8075_16>; + label = "lan4"; +}; + +&dp2 { + status = "okay"; + phy-handle = <&qca8075_17>; + label = "lan3"; +}; + +&dp3 { + status = "okay"; + phy-handle = <&qca8075_18>; + label = "lan2"; +}; + +&dp4 { + status = "okay"; + phy-handle = <&qca8075_19>; + label = "lan1"; +}; + +&dp5 { + status = "okay"; + qcom,mactype = <1>; + phy-handle = <&aqr113c_8>; + label = "10g-1"; +}; + +&dp6_syn { + status = "okay"; + phy-handle = <&aqr113c_0>; + label = "10g-2"; +}; + +&wifi { + status = "okay"; + + qcom,ath11k-calibration-variant = "QNAP-301w"; +}; |