diff options
Diffstat (limited to 'target/linux/ipq806x')
4 files changed, 10 insertions, 10 deletions
diff --git a/target/linux/ipq806x/patches-5.4/088-v5.8-watchdog-qcom-wdt-disable-pretimeout-on-timer-platfo.patch b/target/linux/ipq806x/patches-5.4/088-v5.8-watchdog-qcom-wdt-disable-pretimeout-on-timer-platfo.patch index 605eb7d07b..1bd44fd5a0 100644 --- a/target/linux/ipq806x/patches-5.4/088-v5.8-watchdog-qcom-wdt-disable-pretimeout-on-timer-platfo.patch +++ b/target/linux/ipq806x/patches-5.4/088-v5.8-watchdog-qcom-wdt-disable-pretimeout-on-timer-platfo.patch @@ -20,7 +20,7 @@ Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> --- a/drivers/watchdog/qcom-wdt.c +++ b/drivers/watchdog/qcom-wdt.c -@@ -40,6 +40,11 @@ static const u32 reg_offset_data_kpss[] +@@ -39,6 +39,11 @@ static const u32 reg_offset_data_kpss[] [WDT_BITE_TIME] = 0x14, }; @@ -32,7 +32,7 @@ Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> struct qcom_wdt { struct watchdog_device wdd; unsigned long rate; -@@ -179,19 +184,29 @@ static void qcom_clk_disable_unprepare(v +@@ -168,19 +173,29 @@ static void qcom_clk_disable_unprepare(v clk_disable_unprepare(data); } @@ -65,7 +65,7 @@ Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> dev_err(dev, "Unsupported QCOM WDT module\n"); return -ENODEV; } -@@ -247,7 +262,7 @@ static int qcom_wdt_probe(struct platfor +@@ -236,7 +251,7 @@ static int qcom_wdt_probe(struct platfor /* check if there is pretimeout support */ irq = platform_get_irq_optional(pdev, 0); @@ -74,7 +74,7 @@ Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> ret = devm_request_irq(dev, irq, qcom_wdt_isr, IRQF_TRIGGER_RISING, "wdt_bark", &wdt->wdd); -@@ -267,7 +282,7 @@ static int qcom_wdt_probe(struct platfor +@@ -256,7 +271,7 @@ static int qcom_wdt_probe(struct platfor wdt->wdd.min_timeout = 1; wdt->wdd.max_timeout = 0x10000000U / wdt->rate; wdt->wdd.parent = dev; @@ -83,7 +83,7 @@ Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> if (readl(wdt_addr(wdt, WDT_STS)) & 1) wdt->wdd.bootstatus = WDIOF_CARDRESET; -@@ -311,9 +326,9 @@ static int __maybe_unused qcom_wdt_resum +@@ -300,9 +315,9 @@ static int __maybe_unused qcom_wdt_resum static SIMPLE_DEV_PM_OPS(qcom_wdt_pm_ops, qcom_wdt_suspend, qcom_wdt_resume); static const struct of_device_id qcom_wdt_of_table[] = { diff --git a/target/linux/ipq806x/patches-5.4/093-4-v5.8-ipq806x-PCI-qcom-Use-bulk-clk-api-and-assert-on-error.patch b/target/linux/ipq806x/patches-5.4/093-4-v5.8-ipq806x-PCI-qcom-Use-bulk-clk-api-and-assert-on-error.patch index 95531508b6..ecfcd74693 100644 --- a/target/linux/ipq806x/patches-5.4/093-4-v5.8-ipq806x-PCI-qcom-Use-bulk-clk-api-and-assert-on-error.patch +++ b/target/linux/ipq806x/patches-5.4/093-4-v5.8-ipq806x-PCI-qcom-Use-bulk-clk-api-and-assert-on-error.patch @@ -161,7 +161,7 @@ Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com> /* enable PCIe clocks and resets */ val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL); -@@ -406,36 +393,6 @@ static int qcom_pcie_init_2_1_0(struct q +@@ -408,36 +395,6 @@ static int qcom_pcie_init_2_1_0(struct q val |= PHY_REFCLK_SSP_EN; writel(val, pcie->parf + PCIE20_PARF_PHY_REFCLK); @@ -198,7 +198,7 @@ Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com> /* wait for clock acquisition */ usleep_range(1000, 1500); -@@ -448,15 +405,19 @@ static int qcom_pcie_init_2_1_0(struct q +@@ -450,15 +407,19 @@ static int qcom_pcie_init_2_1_0(struct q return 0; diff --git a/target/linux/ipq806x/patches-5.4/093-7-v5.8-ipq806x-PCI-qcom-Add-ipq8064-rev2-variant.patch b/target/linux/ipq806x/patches-5.4/093-7-v5.8-ipq806x-PCI-qcom-Add-ipq8064-rev2-variant.patch index c3d61f164c..be334d72e9 100644 --- a/target/linux/ipq806x/patches-5.4/093-7-v5.8-ipq806x-PCI-qcom-Add-ipq8064-rev2-variant.patch +++ b/target/linux/ipq806x/patches-5.4/093-7-v5.8-ipq806x-PCI-qcom-Add-ipq8064-rev2-variant.patch @@ -26,7 +26,7 @@ Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com> writel(PCS_DEEMPH_TX_DEEMPH_GEN1(24) | PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(24) | PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(34), -@@ -1328,6 +1329,7 @@ err_pm_runtime_put: +@@ -1330,6 +1331,7 @@ err_pm_runtime_put: static const struct of_device_id qcom_pcie_match[] = { { .compatible = "qcom,pcie-apq8084", .data = &ops_1_0_0 }, { .compatible = "qcom,pcie-ipq8064", .data = &ops_2_1_0 }, diff --git a/target/linux/ipq806x/patches-5.4/093-8-v5.8-ipq806x-PCI-qcom-Support-pci-speed-set-for-ipq806x.patch b/target/linux/ipq806x/patches-5.4/093-8-v5.8-ipq806x-PCI-qcom-Support-pci-speed-set-for-ipq806x.patch index 02ac7460e8..5440b2f7f8 100644 --- a/target/linux/ipq806x/patches-5.4/093-8-v5.8-ipq806x-PCI-qcom-Support-pci-speed-set-for-ipq806x.patch +++ b/target/linux/ipq806x/patches-5.4/093-8-v5.8-ipq806x-PCI-qcom-Support-pci-speed-set-for-ipq806x.patch @@ -49,7 +49,7 @@ Backported with light changes: }; #define to_qcom_pcie(x) dev_get_drvdata((x)->dev) -@@ -397,6 +401,11 @@ static int qcom_pcie_init_2_1_0(struct q +@@ -399,6 +403,11 @@ static int qcom_pcie_init_2_1_0(struct q /* wait for clock acquisition */ usleep_range(1000, 1500); @@ -61,7 +61,7 @@ Backported with light changes: /* Set the Max TLP size to 2K, instead of using default of 4K */ writel(CFG_REMOTE_RD_REQ_BRIDGE_SIZE_2K, -@@ -1261,6 +1270,10 @@ static int qcom_pcie_probe(struct platfo +@@ -1263,6 +1272,10 @@ static int qcom_pcie_probe(struct platfo goto err_pm_runtime_put; } |