1 files changed, 125 insertions, 0 deletions
diff --git a/target/linux/ipq806x/patches-3.18/101-ARM-qcom-add-USB-nodes-to-ipq806x-ap148.patch b/target/linux/ipq806x/patches-3.18/101-ARM-qcom-add-USB-nodes-to-ipq806x-ap148.patch
new file mode 100644
index 0000000000..f1b41648a3
--- /dev/null
+++ b/target/linux/ipq806x/patches-3.18/101-ARM-qcom-add-USB-nodes-to-ipq806x-ap148.patch
@@ -0,0 +1,125 @@
+--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
++++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+@@ -112,5 +112,29 @@
+ 		sata@29000000 {
+ 			status = "ok";
+ 		};
++
++		phy@100f8800 {		/* USB3 port 1 HS phy */
++			status = "ok";
++		};
++
++		phy@100f8830 {		/* USB3 port 1 SS phy */
++			status = "ok";
++		};
++
++		phy@110f8800 {		/* USB3 port 0 HS phy */
++			status = "ok";
++		};
++
++		phy@110f8830 {		/* USB3 port 0 SS phy */
++			status = "ok";
++		};
++
++		usb30@0 {
++			status = "ok";
++		};
++
++		usb30@1 {
++			status = "ok";
++		};
+ 	};
+ };
+--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
+@@ -291,5 +291,90 @@
+ 			#clock-cells = <1>;
+ 			#reset-cells = <1>;
+ 		};
++
++		hs_phy_1: phy@100f8800 {
++			compatible = "qcom,dwc3-hs-usb-phy";
++			reg = <0x100f8800 0x30>;
++			clocks = <&gcc USB30_1_UTMI_CLK>;
++			clock-names = "ref";
++			#phy-cells = <0>;
++
++			status = "disabled";
++		};
++
++		ss_phy_1: phy@100f8830 {
++			compatible = "qcom,dwc3-ss-usb-phy";
++			reg = <0x100f8830 0x30>;
++			clocks = <&gcc USB30_1_MASTER_CLK>;
++			clock-names = "ref";
++			#phy-cells = <0>;
++
++			status = "disabled";
++		};
++
++		hs_phy_0: phy@110f8800 {
++			compatible = "qcom,dwc3-hs-usb-phy";
++			reg = <0x110f8800 0x30>;
++			clocks = <&gcc USB30_0_UTMI_CLK>;
++			clock-names = "ref";
++			#phy-cells = <0>;
++
++			status = "disabled";
++		};
++
++		ss_phy_0: phy@110f8830 {
++			compatible = "qcom,dwc3-ss-usb-phy";
++			reg = <0x110f8830 0x30>;
++			clocks = <&gcc USB30_0_MASTER_CLK>;
++			clock-names = "ref";
++			#phy-cells = <0>;
++
++			status = "disabled";
++		};
++
++		usb3_0: usb30@0 {
++			compatible = "qcom,dwc3";
++			#address-cells = <1>;
++			#size-cells = <1>;
++			clocks = <&gcc USB30_0_MASTER_CLK>;
++			clock-names = "core";
++
++			ranges;
++
++			status = "disabled";
++
++			dwc3@11000000 {
++				compatible = "snps,dwc3";
++				reg = <0x11000000 0xcd00>;
++				interrupts = <0 110 0x4>;
++				phys = <&hs_phy_0>, <&ss_phy_0>;
++				phy-names = "usb2-phy", "usb3-phy";
++				tx-fifo-resize;
++				dr_mode = "host";
++			};
++		};
++
++		usb3_1: usb30@1 {
++			compatible = "qcom,dwc3";
++			#address-cells = <1>;
++			#size-cells = <1>;
++			clocks = <&gcc USB30_1_MASTER_CLK>;
++			clock-names = "core";
++
++			ranges;
++
++			status = "disabled";
++
++			dwc3@10000000 {
++				compatible = "snps,dwc3";
++				reg = <0x10000000 0xcd00>;
++				interrupts = <0 205 0x4>;
++				phys = <&hs_phy_1>, <&ss_phy_1>;
++				phy-names = "usb2-phy", "usb3-phy";
++				tx-fifo-resize;
++				dr_mode = "host";
++			};
++		};
++
+ 	};
+ };