diff options
Diffstat (limited to 'target/linux/brcm63xx-2.6/patches/001-bcm963xx.patch')
| -rw-r--r-- | target/linux/brcm63xx-2.6/patches/001-bcm963xx.patch | 12834 |
1 files changed, 12834 insertions, 0 deletions
diff --git a/target/linux/brcm63xx-2.6/patches/001-bcm963xx.patch b/target/linux/brcm63xx-2.6/patches/001-bcm963xx.patch new file mode 100644 index 0000000000..abf9a7b74a --- /dev/null +++ b/target/linux/brcm63xx-2.6/patches/001-bcm963xx.patch @@ -0,0 +1,12834 @@ +diff -urN linux.old/arch/mips/bcm963xx/bcm63xx_led.c linux.dev/arch/mips/bcm963xx/bcm63xx_led.c +--- linux.old/arch/mips/bcm963xx/bcm63xx_led.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm963xx/bcm63xx_led.c 2006-08-25 00:39:38.000000000 +0200 +@@ -0,0 +1,582 @@ ++/* ++<:copyright-gpl ++ Copyright 2002 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++/*************************************************************************** ++ * File Name : bcm63xx_led.c ++ * ++ * Description: ++ * ++ * This file contains bcm963xx board led control API functions. ++ * ++ * To use it, do the following ++ * ++ * 1). define in the board.c the following led mappping (this is for 6345GW board): ++ * const LED_MAP_PAIR cLedMapping45GW[] = ++ * { // led name Initial state physical pin (ledMask) ++ * {kLedUsb, kLedStateOff, GPIO_LED_PIN_7}, ++ * {kLedAdsl, kLedStateOff, GPIO_LED_PIN_8}, ++ * {kLedPPP, kLedStateOff, GPIO_LED_PIN_9}, // PPP and WanData share PIN_9 ++ * {kLedWanData, kLedStateOff, GPIO_LED_PIN_9}, ++ * {kLedWireless, kLedStateOff, GPIO_LED_PIN_10}, ++ * {kLedEnd, kLedStateOff, 0 } // NOTE: kLedEnd has to be at the end. ++ * ++ * 2). };To initialize led API and initial state of the leds, call the following function with the mapping ++ * pointer from the above struct ++ * ++ * boardLedInit((PLED_MAP_PAIR) &cLedMapping45R); ++ * ++ * 3). Sample call for kernel mode: ++ * ++ * kerSysLedCtrl(kLedAdsl, kLedStateBlinkOnce); // kLedxxx defines in board.h ++ * ++ * 4). Sample call for user mode ++ * ++ * sysLedCtrl(kLedAdsl, kLedStateBlinkOnce); // kLedxxx defines in board_api.h ++ * ++ * ++ * Created on : 10/28/2002 seanl ++ * ++ ***************************************************************************/ ++ ++/* Includes. */ ++#include <linux/init.h> ++#include <linux/fs.h> ++#include <linux/capability.h> ++#include <linux/slab.h> ++#include <linux/errno.h> ++#include <linux/module.h> ++#include <linux/netdevice.h> ++#include <asm/uaccess.h> ++ ++#include <bcm_map_part.h> ++#include <board.h> ++ ++#define k100ms (HZ / 10) // ~100 ms ++#define kFastBlinkCount 0 // ~100ms ++#define kSlowBlinkCount 5 // ~600ms ++ ++#define MAX_VIRT_LEDS 12 ++ ++// uncomment // for debug led ++//#define DEBUG_LED ++ ++// global variables: ++struct timer_list gLedTimer; ++int gTimerOn = FALSE; ++int gLedCount = 0; ++ ++typedef struct ledinfo ++{ ++ unsigned short ledMask; // mask for led: ie. giop 10 = 0x0400 ++ unsigned short ledActiveLow; // GPIO bit reset to turn on LED ++ unsigned short ledMaskFail; // mask for led: ie. giop 10 = 0x0400 ++ unsigned short ledActiveLowFail;// GPIO bit reset to turn on LED ++ BOARD_LED_STATE ledState; // current led state ++ BOARD_LED_STATE savedLedState; // used in blink once for restore to the orignal ledState ++ int blinkCountDown; // if == 0, do blink (toggle). Is assgined value and dec by 1 at each timer. ++} LED_INFO, *PLED_INFO; ++ ++static PLED_INFO gLed = NULL; ++static PLED_INFO gpVirtLeds[MAX_VIRT_LEDS]; ++static HANDLE_LED_FUNC gLedHwFunc[MAX_VIRT_LEDS]; ++static HANDLE_LED_FUNC gLedHwFailFunc[MAX_VIRT_LEDS]; ++ ++#if 0 /* BROKEN */ ++#if defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338) ++static int gLedOffInBridgeMode = 1; ++#elif defined(CONFIG_BCM96345) ++static int gLedOffInBridgeMode = 0; ++#endif ++#endif ++ ++void ledTimerExpire(void); ++int initLedInfo( PLED_MAP_PAIR pCurMap, PLED_INFO pCurLed ); ++ ++//************************************************************************************** ++// LED operations ++//************************************************************************************** ++ ++// turn led on and set the ledState ++void ledOn(PLED_INFO pLed) ++{ ++ if( pLed->ledMask ) ++ { ++ GPIO->GPIODir |= pLed->ledMask; // turn on the direction bit in case was turned off by some one ++ if( pLed->ledActiveLow ) ++ GPIO->GPIOio &= ~pLed->ledMask; // turn on the led ++ else ++ GPIO->GPIOio |= pLed->ledMask; // turn on the led ++ pLed->ledState = pLed->savedLedState = kLedStateOn; ++ } ++} ++ ++ ++// turn led off and set the ledState ++void ledOff(PLED_INFO pLed) ++{ ++ if( pLed->ledMask ) ++ { ++ GPIO->GPIODir |= pLed->ledMask; // turn on the direction bit in case was turned off by some one ++ if( pLed->ledActiveLow ) ++ GPIO->GPIOio |= pLed->ledMask; // turn off the led ++ else ++ GPIO->GPIOio &= ~pLed->ledMask; // turn off the led ++ pLed->ledState = pLed->savedLedState = kLedStateOff; ++ } ++} ++ ++// turn led on and set the ledState ++void ledOnFail(PLED_INFO pLed) ++{ ++ if( pLed->ledMaskFail ) ++ { ++ GPIO->GPIODir |= pLed->ledMaskFail; // turn on the direction bit in case was turned off by some one ++ if( pLed->ledActiveLowFail ) ++ GPIO->GPIOio &= ~pLed->ledMaskFail;// turn on the led ++ else ++ GPIO->GPIOio |= pLed->ledMaskFail; // turn on the led ++ pLed->ledState = pLed->savedLedState = kLedStateFail; ++ } ++} ++ ++ ++// turn led off and set the ledState ++void ledOffFail(PLED_INFO pLed) ++{ ++ if( pLed->ledMaskFail ) ++ { ++ GPIO->GPIODir |= pLed->ledMaskFail; // turn on the direction bit in case was turned off by some one ++ if( pLed->ledActiveLowFail ) ++ GPIO->GPIOio |= pLed->ledMaskFail; // turn off the led ++ else ++ GPIO->GPIOio &= ~pLed->ledMaskFail;// turn off the led ++ pLed->ledState = pLed->savedLedState = kLedStateOff; ++ } ++} ++ ++ ++// toggle the led and return the current ledState ++BOARD_LED_STATE ledToggle(PLED_INFO pLed) ++{ ++ GPIO->GPIODir |= pLed->ledMask; // turn on the direction bit in case was turned off by some one ++ if (GPIO->GPIOio & pLed->ledMask) ++ { ++ GPIO->GPIOio &= ~(pLed->ledMask); ++ return( (pLed->ledActiveLow) ? kLedStateOn : kLedStateOff ); ++ } ++ else ++ { ++ GPIO->GPIOio |= pLed->ledMask; ++ return( (pLed->ledActiveLow) ? kLedStateOff : kLedStateOn ); ++ } ++} ++ ++ ++// led timer. Will return if timer is already on ++void ledTimerStart(void) ++{ ++ if (gTimerOn) ++ return; ++ ++#if defined(DEBUG_LED) ++ printk("led: add_timer\n"); ++#endif ++ ++ init_timer(&gLedTimer); ++ gLedTimer.function = (void*)ledTimerExpire; ++ gLedTimer.expires = jiffies + k100ms; // timer expires in ~100ms ++ add_timer (&gLedTimer); ++ gTimerOn = TRUE; ++} ++ ++ ++// led timer expire kicks in about ~100ms and perform the led operation according to the ledState and ++// restart the timer according to ledState ++void ledTimerExpire(void) ++{ ++ int i; ++ PLED_INFO pCurLed; ++ ++ gTimerOn = FALSE; ++ ++ for (i = 0, pCurLed = gLed; i < gLedCount; i++, pCurLed++) ++ { ++#if defined(DEBUG_LED) ++ printk("led[%d]: Mask=0x%04x, State = %d, blcd=%d\n", i, pCurLed->ledMask, pCurLed->ledState, pCurLed->blinkCountDown); ++#endif ++ switch (pCurLed->ledState) ++ { ++ case kLedStateOn: ++ case kLedStateOff: ++ case kLedStateFail: ++ pCurLed->blinkCountDown = 0; // reset the blink count down ++ break; ++ ++ case kLedStateBlinkOnce: ++ ledToggle(pCurLed); ++ pCurLed->blinkCountDown = 0; // reset to 0 ++ pCurLed->ledState = pCurLed->savedLedState; ++ if (pCurLed->ledState == kLedStateSlowBlinkContinues || ++ pCurLed->ledState == kLedStateFastBlinkContinues) ++ ledTimerStart(); // start timer if in blinkContinues stats ++ break; ++ ++ case kLedStateSlowBlinkContinues: ++ if (pCurLed->blinkCountDown-- == 0) ++ { ++ pCurLed->blinkCountDown = kSlowBlinkCount; ++ ledToggle(pCurLed); ++ } ++ ledTimerStart(); ++ break; ++ ++ case kLedStateFastBlinkContinues: ++ if (pCurLed->blinkCountDown-- == 0) ++ { ++ pCurLed->blinkCountDown = kFastBlinkCount; ++ ledToggle(pCurLed); ++ } ++ ledTimerStart(); ++ break; ++ ++ default: ++ printk("Invalid state = %d\n", pCurLed->ledState); ++ } ++ } ++} ++ ++// initialize the gLedCount and allocate and fill gLed struct ++void __init boardLedInit(PLED_MAP_PAIR cLedMapping) ++{ ++ PLED_MAP_PAIR p1, p2; ++ PLED_INFO pCurLed; ++ int needTimer = FALSE; ++ int alreadyUsed = 0; ++ ++#if defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338) ++ /* Set blink rate for BCM6348/BCM6338 hardware LEDs. */ ++ GPIO->LEDCtrl &= ~LED_INTERVAL_SET_MASK; ++ GPIO->LEDCtrl |= LED_INTERVAL_SET_80MS; ++#endif ++ ++ memset( gpVirtLeds, 0x00, sizeof(gpVirtLeds) ); ++ memset( gLedHwFunc, 0x00, sizeof(gLedHwFunc) ); ++ memset( gLedHwFailFunc, 0x00, sizeof(gLedHwFailFunc) ); ++ ++ gLedCount = 0; ++ ++ // Check for multiple LED names and multiple LED GPIO pins that share the ++ // same physical board LED. ++ for( p1 = cLedMapping; p1->ledName != kLedEnd; p1++ ) ++ { ++ alreadyUsed = 0; ++ for( p2 = cLedMapping; p2 != p1; p2++ ) ++ { ++ if( (p1->ledMask && p1->ledMask == p2->ledMask) || ++ (p1->ledMaskFail && p1->ledMaskFail == p2->ledMaskFail) ) ++ { ++ alreadyUsed = 1; ++ break; ++ } ++ } ++ ++ if( alreadyUsed == 0 ) ++ gLedCount++; ++ } ++ ++ gLed = (PLED_INFO) kmalloc((gLedCount * sizeof(LED_INFO)), GFP_KERNEL); ++ if( gLed == NULL ) ++ { ++ printk( "LED memory allocation error.\n" ); ++ return; ++ } ++ ++ memset( gLed, 0x00, gLedCount * sizeof(LED_INFO) ); ++ ++ // initial the gLed with unique ledMask and initial state. If more than 1 ledNames share the physical led ++ // (ledMask) the first defined led's ledInitState will be used. ++ pCurLed = gLed; ++ for( p1 = cLedMapping; p1->ledName != kLedEnd; p1++ ) ++ { ++ if( (int) p1->ledName > MAX_VIRT_LEDS ) ++ continue; ++ ++ alreadyUsed = 0; ++ for( p2 = cLedMapping; p2 != p1; p2++ ) ++ { ++ if( (p1->ledMask && p1->ledMask == p2->ledMask) || ++ (p1->ledMaskFail && p1->ledMaskFail == p2->ledMaskFail) ) ++ { ++ alreadyUsed = 1; ++ break; ++ } ++ } ++ ++ if( alreadyUsed == 0 ) ++ { ++ // Initialize the board LED for the first time. ++ needTimer = initLedInfo( p1, pCurLed ); ++ gpVirtLeds[(int) p1->ledName] = pCurLed; ++ pCurLed++; ++ } ++ else ++ { ++ PLED_INFO pLed; ++ for( pLed = gLed; pLed != pCurLed; pLed++ ) ++ { ++ // Find the LED_INFO structure that has already been initialized. ++ if((pLed->ledMask && pLed->ledMask == p1->ledMask) || ++ (pLed->ledMaskFail && pLed->ledMaskFail==p1->ledMaskFail)) ++ { ++ // The board LED has already been initialized but possibly ++ // not completely initialized. ++ if( p1->ledMask ) ++ { ++ pLed->ledMask = p1->ledMask; ++ pLed->ledActiveLow = p1->ledActiveLow; ++ } ++ if( p1->ledMaskFail ) ++ { ++ pLed->ledMaskFail = p1->ledMaskFail; ++ pLed->ledActiveLowFail = p1->ledActiveLowFail; ++ } ++ gpVirtLeds[(int) p1->ledName] = pLed; ++ break; ++ } ++ } ++ } ++ } ++ ++ if (needTimer) ++ ledTimerStart(); ++ ++#if defined(DEBUG_LED) ++ int i; ++ for (i=0; i < gLedCount; i++) ++ printk("initLed: led[%d]: mask=0x%04x, state=%d\n", i,(gLed+i)->ledMask, (gLed+i)->ledState); ++#endif ++ ++} ++ ++// Initialize a structure that contains information about a physical board LED ++// control. The board LED may contain more than one GPIO pin to control a ++// normal condition (green) or a failure condition (red). ++int initLedInfo( PLED_MAP_PAIR pCurMap, PLED_INFO pCurLed ) ++{ ++ int needTimer = FALSE; ++ pCurLed->ledState = pCurLed->savedLedState = pCurMap->ledInitState; ++ pCurLed->ledMask = pCurMap->ledMask; ++ pCurLed->ledActiveLow = pCurMap->ledActiveLow; ++ pCurLed->ledMaskFail = pCurMap->ledMaskFail; ++ pCurLed->ledActiveLowFail = pCurMap->ledActiveLowFail; ++ ++ switch (pCurLed->ledState) ++ { ++ case kLedStateOn: ++ pCurLed->blinkCountDown = 0; // reset the blink count down ++ ledOn(pCurLed); ++ break; ++ case kLedStateOff: ++ pCurLed->blinkCountDown = 0; // reset the blink count down ++ ledOff(pCurLed); ++ break; ++ case kLedStateFail: ++ pCurLed->blinkCountDown = 0; // reset the blink count down ++ ledOnFail(pCurLed); ++ break; ++ case kLedStateBlinkOnce: ++ pCurLed->blinkCountDown = 1; ++ needTimer = TRUE; ++ break; ++ case kLedStateSlowBlinkContinues: ++ pCurLed->blinkCountDown = kSlowBlinkCount; ++ needTimer = TRUE; ++ break; ++ case kLedStateFastBlinkContinues: ++ pCurLed->blinkCountDown = kFastBlinkCount; ++ needTimer = TRUE; ++ break; ++ default: ++ printk("Invalid state = %d\n", pCurLed->ledState); ++ } ++ ++ return( needTimer ); ++} ++ ++#if 0 /* BROKEN */ ++// Determines if there is at least one interface in bridge mode. Bridge mode ++// is determined by the cfm convention of naming bridge interfaces nas17 ++// through nas24. ++static int isBridgedProtocol(void) ++{ ++ extern int dev_get(const char *name); ++ const int firstBridgeId = 17; ++ const int lastBridgeId = 24; ++ int i; ++ int ret = FALSE; ++ char name[16]; ++ ++ for( i = firstBridgeId; i <= lastBridgeId; i++ ) ++ { ++ sprintf( name, "nas%d", i ); ++ ++ if( dev_get(name) ) ++ { ++ ret = TRUE; ++ break; ++ } ++ } ++ ++ return(ret); ++} ++#endif ++ ++// led ctrl. Maps the ledName to the corresponding ledInfoPtr and perform the led operation ++void boardLedCtrl(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState) ++{ ++ PLED_INFO ledInfoPtr; ++ ++ // do the mapping from virtual to physical led ++ if( (int) ledName < MAX_VIRT_LEDS ) ++ ledInfoPtr = gpVirtLeds[(int) ledName]; ++ else ++ ledInfoPtr = NULL; ++ ++ if (ledInfoPtr == NULL) ++ return; ++ ++ if( ledState != kLedStateFail && gLedHwFunc[(int) ledName] ) ++ { ++ (*gLedHwFunc[(int) ledName]) (ledName, ledState); ++ ledOffFail(ledInfoPtr); ++ return; ++ } ++ else ++ if( ledState == kLedStateFail && gLedHwFailFunc[(int) ledName] ) ++ { ++ (*gLedHwFailFunc[(int) ledName]) (ledName, ledState); ++ ledOff(ledInfoPtr); ++ return; ++ } ++ ++#if 0 /* BROKEN */ ++ // Do not blink the WAN Data LED if at least one interface is in bridge mode. ++ if(gLedOffInBridgeMode == 1 && (ledName == kLedWanData || ledName == kLedPPP)) ++ { ++ static int BridgedProtocol = -1; ++ ++ if( BridgedProtocol == -1 ) ++ BridgedProtocol = isBridgedProtocol(); ++ ++ if( BridgedProtocol == TRUE ) ++ return; ++ } ++#endif ++ ++ // If the state is kLedStateFail and there is not a failure LED defined ++ // in the board parameters, change the state to kLedStateFastBlinkContinues. ++ if( ledState == kLedStateFail && ledInfoPtr->ledMaskFail == 0 ) ++ ledState = kLedStateFastBlinkContinues; ++ ++ switch (ledState) ++ { ++ case kLedStateOn: ++ // First, turn off the complimentary (failure) LED GPIO. ++ if( ledInfoPtr->ledMaskFail ) ++ ledOffFail(ledInfoPtr); ++ else ++ if( gLedHwFailFunc[(int) ledName] ) ++ (*gLedHwFailFunc[(int) ledName]) (ledName, kLedStateOff); ++ ++ // Next, turn on the specified LED GPIO. ++ ledOn(ledInfoPtr); ++ break; ++ ++ case kLedStateOff: ++ // First, turn off the complimentary (failure) LED GPIO. ++ if( ledInfoPtr->ledMaskFail ) ++ ledOffFail(ledInfoPtr); ++ else ++ if( gLedHwFailFunc[(int) ledName] ) ++ (*gLedHwFailFunc[(int) ledName]) (ledName, kLedStateOff); ++ ++ // Next, turn off the specified LED GPIO. ++ ledOff(ledInfoPtr); ++ break; ++ ++ case kLedStateFail: ++ // First, turn off the complimentary (normal) LED GPIO. ++ if( ledInfoPtr->ledMask ) ++ ledOff(ledInfoPtr); ++ else ++ if( gLedHwFunc[(int) ledName] ) ++ (*gLedHwFunc[(int) ledName]) (ledName, kLedStateOff); ++ ++ // Next, turn on (red) the specified LED GPIO. ++ ledOnFail(ledInfoPtr); ++ break; ++ ++ case kLedStateBlinkOnce: ++ // skip blinkOnce if it is already in Slow/Fast blink continues state ++ if (ledInfoPtr->savedLedState == kLedStateSlowBlinkContinues || ++ ledInfoPtr->savedLedState == kLedStateFastBlinkContinues) ++ ; ++ else ++ { ++ if (ledInfoPtr->blinkCountDown == 0) // skip the call if it is 1 ++ { ++ ledToggle(ledInfoPtr); ++ ledInfoPtr->blinkCountDown = 1; // it will be reset to 0 when timer expires ++ ledInfoPtr->ledState = kLedStateBlinkOnce; ++ ledTimerStart(); ++ } ++ } ++ break; ++ ++ case kLedStateSlowBlinkContinues: ++ ledInfoPtr->blinkCountDown = kSlowBlinkCount; ++ ledInfoPtr->ledState = kLedStateSlowBlinkContinues; ++ ledInfoPtr->savedLedState = kLedStateSlowBlinkContinues; ++ ledTimerStart(); ++ break; ++ ++ case kLedStateFastBlinkContinues: ++ ledInfoPtr->blinkCountDown = kFastBlinkCount; ++ ledInfoPtr->ledState = kLedStateFastBlinkContinues; ++ ledInfoPtr->savedLedState = kLedStateFastBlinkContinues; ++ ledTimerStart(); ++ break; ++ ++ default: ++ printk("Invalid led state\n"); ++ } ++} ++ ++// This function is called for an LED that is controlled by hardware. ++void kerSysLedRegisterHwHandler( BOARD_LED_NAME ledName, ++ HANDLE_LED_FUNC ledHwFunc, int ledFailType ) ++{ ++ if( (int) ledName < MAX_VIRT_LEDS ) ++ { ++ if( ledFailType == 1 ) ++ gLedHwFailFunc[(int) ledName] = ledHwFunc; ++ else ++ gLedHwFunc[(int) ledName] = ledHwFunc; ++ } ++} ++ +diff -urN linux.old/arch/mips/bcm963xx/board.c linux.dev/arch/mips/bcm963xx/board.c +--- linux.old/arch/mips/bcm963xx/board.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm963xx/board.c 2006-08-25 15:16:26.000000000 +0200 +@@ -0,0 +1,555 @@ ++/* ++<:copyright-gpl ++ Copyright 2002 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++ ++/* Includes. */ ++#include <linux/version.h> ++#include <linux/init.h> ++#include <linux/fs.h> ++#include <linux/interrupt.h> ++#include <linux/capability.h> ++#include <linux/slab.h> ++#include <linux/errno.h> ++#include <linux/module.h> ++#include <linux/pagemap.h> ++#include <asm/uaccess.h> ++#include <linux/wait.h> ++#include <linux/poll.h> ++#include <linux/sched.h> ++#include <linux/list.h> ++#include <linux/if.h> ++#include <linux/spinlock.h> ++ ++#include <bcm_map_part.h> ++#include <board.h> ++#include <bcmTag.h> ++#include "boardparms.h" ++#include "bcm_intr.h" ++#include "board.h" ++#include "bcm_map_part.h" ++ ++static DEFINE_SPINLOCK(board_lock); ++ ++/* Typedefs. */ ++#if defined (NON_CONSECUTIVE_MAC) ++// used to be the last octet. Now changed to the first 5 bits of the the forth octet ++// to reduced the duplicated MAC addresses. ++#define CHANGED_OCTET 3 ++#define SHIFT_BITS 3 ++#else ++#define CHANGED_OCTET 1 ++#define SHIFT_BITS 0 ++#endif ++ ++typedef struct ++{ ++ unsigned long ulId; ++ char chInUse; ++ char chReserved[3]; ++} MAC_ADDR_INFO, *PMAC_ADDR_INFO; ++ ++typedef struct ++{ ++ unsigned long ulSdramSize; ++ unsigned long ulPsiSize; ++ unsigned long ulNumMacAddrs; ++ unsigned long ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN]; ++ MAC_ADDR_INFO MacAddrs[1]; ++} NVRAM_INFO, *PNVRAM_INFO; ++ ++typedef struct ++{ ++ unsigned long eventmask; ++} BOARD_IOC, *PBOARD_IOC; ++ ++ ++/*Dyinggasp callback*/ ++typedef void (*cb_dgasp_t)(void *arg); ++typedef struct _CB_DGASP__LIST ++{ ++ struct list_head list; ++ char name[IFNAMSIZ]; ++ cb_dgasp_t cb_dgasp_fn; ++ void *context; ++}CB_DGASP_LIST , *PCB_DGASP_LIST; ++ ++ ++static LED_MAP_PAIR LedMapping[] = ++{ // led name Initial state physical pin (ledMask) ++ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, ++ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, ++ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, ++ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, ++ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, ++ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, ++ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, ++ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, ++ {kLedEnd, kLedStateOff, 0, 0, 0, 0} // NOTE: kLedEnd has to be at the end. ++}; ++ ++/* Externs. */ ++extern struct file fastcall *fget_light(unsigned int fd, int *fput_needed); ++extern unsigned int nr_free_pages (void); ++extern const char *get_system_type(void); ++extern void kerSysFlashInit(void); ++extern unsigned long get_nvram_start_addr(void); ++extern unsigned long get_scratch_pad_start_addr(void); ++extern unsigned long getMemorySize(void); ++extern void __init boardLedInit(PLED_MAP_PAIR); ++extern void boardLedCtrl(BOARD_LED_NAME, BOARD_LED_STATE); ++extern void kerSysLedRegisterHandler( BOARD_LED_NAME ledName, ++ HANDLE_LED_FUNC ledHwFunc, int ledFailType ); ++ ++/* Prototypes. */ ++void __init InitNvramInfo( void ); ++ ++/* DyingGasp function prototype */ ++static void __init kerSysDyingGaspMapIntr(void); ++static irqreturn_t kerSysDyingGaspIsr(int irq, void * dev_id, struct pt_regs * regs); ++static void __init kerSysInitDyingGaspHandler( void ); ++static void __exit kerSysDeinitDyingGaspHandler( void ); ++/* -DyingGasp function prototype - */ ++ ++static PNVRAM_INFO g_pNvramInfo = NULL; ++static int g_ledInitialized = 0; ++static CB_DGASP_LIST *g_cb_dgasp_list_head = NULL; ++ ++static int g_wakeup_monitor = 0; ++static struct file *g_monitor_file = NULL; ++static struct task_struct *g_monitor_task = NULL; ++static unsigned int (*g_orig_fop_poll) ++ (struct file *, struct poll_table_struct *) = NULL; ++ ++void kerSysMipsSoftReset(void) ++{ ++ if (PERF->RevID == 0x634800A1) { ++ typedef void (*FNPTR) (void); ++ FNPTR bootaddr = (FNPTR) FLASH_BASE; ++ int i; ++ ++ /* Disable interrupts. */ ++ //cli(); ++ spin_lock_irq(&board_lock); ++ ++ /* Reset all blocks. */ ++ PERF->BlockSoftReset &= ~BSR_ALL_BLOCKS; ++ for( i = 0; i < 1000000; i++ ) ++ ; ++ PERF->BlockSoftReset |= BSR_ALL_BLOCKS; ++ /* Jump to the power on address. */ ++ (*bootaddr) (); ++ } ++ else ++ PERF->pll_control |= SOFT_RESET; // soft reset mips ++} ++ ++ ++int kerSysGetMacAddress( unsigned char *pucaMacAddr, unsigned long ulId ) ++{ ++ int nRet = 0; ++ PMAC_ADDR_INFO pMai = NULL; ++ PMAC_ADDR_INFO pMaiFreeNoId = NULL; ++ PMAC_ADDR_INFO pMaiFreeId = NULL; ++ unsigned long i = 0, ulIdxNoId = 0, ulIdxId = 0, shiftedIdx = 0; ++ ++ /* CMO -- Fix le problème avec les adresses mac que l'on n'arrive pas ++ * * à relire plusieurs fois */ ++ /* inv_xde */ ++ if (boot_loader_type == BOOT_CFE) ++ memcpy( pucaMacAddr, g_pNvramInfo->ucaBaseMacAddr, ++ NVRAM_MAC_ADDRESS_LEN ); ++ else { ++ pucaMacAddr[0] = 0x00; ++ pucaMacAddr[1] = 0x07; ++ pucaMacAddr[2] = 0x3A; ++ pucaMacAddr[3] = 0xFF; ++ pucaMacAddr[4] = 0xFF; ++ pucaMacAddr[5] = 0xFF; ++ } ++ ++ return nRet; ++} /* kerSysGetMacAddr */ ++ ++int kerSysReleaseMacAddress( unsigned char *pucaMacAddr ) ++{ ++ int nRet = -EINVAL; ++ unsigned long ulIdx = 0; ++ int idx = (pucaMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET] - ++ g_pNvramInfo->ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET]); ++ ++ // if overflow 255 (negitive), add 256 to have the correct index ++ if (idx < 0) ++ idx += 256; ++ ulIdx = (unsigned long) (idx >> SHIFT_BITS); ++ ++ if( ulIdx < g_pNvramInfo->ulNumMacAddrs ) ++ { ++ PMAC_ADDR_INFO pMai = &g_pNvramInfo->MacAddrs[ulIdx]; ++ if( pMai->chInUse == 1 ) ++ { ++ pMai->chInUse = 0; ++ nRet = 0; ++ } ++ } ++ ++ return( nRet ); ++} /* kerSysReleaseMacAddr */ ++ ++int kerSysGetSdramSize( void ) ++{ ++ if (boot_loader_type == BOOT_CFE) { ++ return( (int) g_pNvramInfo->ulSdramSize ); ++ } ++ else { ++ printk("kerSysGetSdramSize : 0x%08X\n", (int)getMemorySize() + 0x00040000); ++ return((int)getMemorySize() + 0x00040000); ++ } ++} /* kerSysGetSdramSize */ ++ ++ ++void kerSysLedCtrl(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState) ++{ ++ if (g_ledInitialized) ++ boardLedCtrl(ledName, ledState); ++} ++ ++unsigned int kerSysMonitorPollHook( struct file *f, struct poll_table_struct *t) ++{ ++ int mask = (*g_orig_fop_poll) (f, t); ++ ++ if( g_wakeup_monitor == 1 && g_monitor_file == f ) ++ { ++ /* If g_wakeup_monitor is non-0, the user mode application needs to ++ * return from a blocking select function. Return POLLPRI which will ++ * cause the select to return with the exception descriptor set. ++ */ ++ mask |= POLLPRI; ++ g_wakeup_monitor = 0; ++ } ++ ++ return( mask ); ++} ++ ++/* Put the user mode application that monitors link state on a run queue. */ ++void kerSysWakeupMonitorTask( void ) ++{ ++ g_wakeup_monitor = 1; ++ if( g_monitor_task ) ++ wake_up_process( g_monitor_task ); ++} ++ ++//<<JUNHON, 2004/09/15, get reset button status , tim hou , 05/04/12 ++int kerSysGetResetHold(void) ++{ ++ unsigned short gpio; ++ ++ if( BpGetPressAndHoldResetGpio( &gpio ) == BP_SUCCESS ) ++ { ++ unsigned long gpio_mask = GPIO_NUM_TO_MASK(gpio); ++ volatile unsigned long *gpio_reg = &GPIO->GPIOio; ++ ++ if( (gpio & ~BP_ACTIVE_MASK) >= 32 ) ++ { ++ gpio_mask = GPIO_NUM_TO_MASK_HIGH(gpio); ++ gpio_reg = &GPIO->GPIOio_high; ++ } ++ //printk("gpio=%04x,gpio_mask=%04x,gpio_reg=%04x\n",gpio,gpio_mask,*gpio_reg); ++ if(*gpio_reg & gpio_mask) //press down ++ return RESET_BUTTON_UP; ++ } ++ return RESET_BUTTON_PRESSDOWN; ++} ++//<<JUNHON, 2004/09/15 ++ ++/*************************************************************************** ++ * Dying gasp ISR and functions. ++ ***************************************************************************/ ++#define KERSYS_DBG printk ++ ++#if defined(CONFIG_BCM96345) ++#define CYCLE_PER_US 70 ++#elif defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338) ++/* The BCM6348 cycles per microsecond is really variable since the BCM6348 ++ * MIPS speed can vary depending on the PLL settings. However, an appoximate ++ * value of 120 will still work OK for the test being done. ++ */ ++#define CYCLE_PER_US 120 ++#endif ++#define DG_GLITCH_TO (100*CYCLE_PER_US) ++ ++static void __init kerSysDyingGaspMapIntr() ++{ ++ unsigned long ulIntr; ++ ++#if defined(CONFIG_BCM96348) || defined(_BCM96348_) || defined(CONFIG_BCM96338) || defined(_BCM96338_) ++ if( BpGetAdslDyingGaspExtIntr( &ulIntr ) == BP_SUCCESS ) { ++ BcmHalMapInterrupt((FN_HANDLER)kerSysDyingGaspIsr, 0, INTERRUPT_ID_DG); ++ BcmHalInterruptEnable( INTERRUPT_ID_DG ); ++ } ++#elif defined(CONFIG_BCM96345) || defined(_BCM96345_) ++ if( BpGetAdslDyingGaspExtIntr( &ulIntr ) == BP_SUCCESS ) { ++ ulIntr += INTERRUPT_ID_EXTERNAL_0; ++ BcmHalMapInterrupt((FN_HANDLER)kerSysDyingGaspIsr, 0, ulIntr); ++ BcmHalInterruptEnable( ulIntr ); ++ } ++#endif ++ ++} ++ ++void kerSysSetWdTimer(ulong timeUs) ++{ ++ TIMER->WatchDogDefCount = timeUs * (FPERIPH/1000000); ++ TIMER->WatchDogCtl = 0xFF00; ++ TIMER->WatchDogCtl = 0x00FF; ++} ++ ++ulong kerSysGetCycleCount(void) ++{ ++ ulong cnt; ++#ifdef _WIN32_WCE ++ cnt = 0; ++#else ++ __asm volatile("mfc0 %0, $9":"=d"(cnt)); ++#endif ++ return(cnt); ++} ++ ++static Bool kerSysDyingGaspCheckPowerLoss(void) ++{ ++ ulong clk0; ++ ulong ulIntr; ++ ++ ulIntr = 0; ++ clk0 = kerSysGetCycleCount(); ++ ++ UART->Data = 'D'; ++ UART->Data = '%'; ++ UART->Data = 'G'; ++ ++#if defined(CONFIG_BCM96345) ++ BpGetAdslDyingGaspExtIntr( &ulIntr ); ++ ++ do { ++ ulong clk1; ++ ++ clk1 = kerSysGetCycleCount(); /* time cleared */ ++ /* wait a little to get new reading */ ++ while ((kerSysGetCycleCount()-clk1) < CYCLE_PER_US*2) ++ ; ++ } while ((0 == (PERF->ExtIrqCfg & (1 << (ulIntr + EI_STATUS_SHFT)))) && ((kerSysGetCycleCount() - clk0) < DG_GLITCH_TO)); ++ ++ if (PERF->ExtIrqCfg & (1 << (ulIntr + EI_STATUS_SHFT))) { /* power glitch */ ++ BcmHalInterruptEnable( ulIntr + INTERRUPT_ID_EXTERNAL_0); ++ KERSYS_DBG(" - Power glitch detected. Duration: %ld us\n", (kerSysGetCycleCount() - clk0)/CYCLE_PER_US); ++ return 0; ++ } ++#elif (defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338)) && !defined(VXWORKS) ++ do { ++ ulong clk1; ++ ++ clk1 = kerSysGetCycleCount(); /* time cleared */ ++ /* wait a little to get new reading */ ++ while ((kerSysGetCycleCount()-clk1) < CYCLE_PER_US*2) ++ ; ++ } while ((PERF->IrqStatus & (1 << (INTERRUPT_ID_DG - INTERNAL_ISR_TABLE_OFFSET))) && ((kerSysGetCycleCount() - clk0) < DG_GLITCH_TO)); ++ ++ if (!(PERF->IrqStatus & (1 << (INTERRUPT_ID_DG - INTERNAL_ISR_TABLE_OFFSET)))) { ++ BcmHalInterruptEnable( INTERRUPT_ID_DG ); ++ KERSYS_DBG(" - Power glitch detected. Duration: %ld us\n", (kerSysGetCycleCount() - clk0)/CYCLE_PER_US); ++ return 0; ++ } ++#endif ++ return 1; ++} ++ ++static void kerSysDyingGaspShutdown( void ) ++{ ++ kerSysSetWdTimer(1000000); ++#if defined(CONFIG_BCM96345) ++ PERF->blkEnables &= ~(EMAC_CLK_EN | USB_CLK_EN | CPU_CLK_EN); ++#elif defined(CONFIG_BCM96348) ++ PERF->blkEnables &= ~(EMAC_CLK_EN | USBS_CLK_EN | USBH_CLK_EN | SAR_CLK_EN); ++#endif ++} ++ ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)) ++static irqreturn_t kerSysDyingGaspIsr(int irq, void * dev_id, struct pt_regs * regs) ++#else ++static unsigned int kerSysDyingGaspIsr(void) ++#endif ++{ ++ struct list_head *pos; ++ CB_DGASP_LIST *tmp, *dsl = NULL; ++ ++ if (kerSysDyingGaspCheckPowerLoss()) { ++ ++ /* first to turn off everything other than dsl */ ++ list_for_each(pos, &g_cb_dgasp_list_head->list) { ++ tmp = list_entry(pos, CB_DGASP_LIST, list); ++ if(strncmp(tmp->name, "dsl", 3)) { ++ (tmp->cb_dgasp_fn)(tmp->context); ++ }else { ++ dsl = tmp; ++ } ++ } ++ ++ /* now send dgasp */ ++ if(dsl) ++ (dsl->cb_dgasp_fn)(dsl->context); ++ ++ /* reset and shutdown system */ ++ kerSysDyingGaspShutdown(); ++ } ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)) ++return( IRQ_HANDLED ); ++#else ++ return( 1 ); ++#endif ++} ++ ++static void __init kerSysInitDyingGaspHandler( void ) ++{ ++ CB_DGASP_LIST *new_node; ++ ++ if( g_cb_dgasp_list_head != NULL) { ++ printk("Error: kerSysInitDyingGaspHandler: list head is not null\n"); ++ return; ++ } ++ new_node= (CB_DGASP_LIST *)kmalloc(sizeof(CB_DGASP_LIST), GFP_KERNEL); ++ memset(new_node, 0x00, sizeof(CB_DGASP_LIST)); ++ INIT_LIST_HEAD(&new_node->list); ++ g_cb_dgasp_list_head = new_node; ++ ++} /* kerSysInitDyingGaspHandler */ ++ ++static void __exit kerSysDeinitDyingGaspHandler( void ) ++{ ++ struct list_head *pos; ++ CB_DGASP_LIST *tmp; ++ ++ if(g_cb_dgasp_list_head == NULL) ++ return; ++ ++ list_for_each(pos, &g_cb_dgasp_list_head->list) { ++ tmp = list_entry(pos, CB_DGASP_LIST, list); ++ list_del(pos); ++ kfree(tmp); ++ } ++ ++ kfree(g_cb_dgasp_list_head); ++ g_cb_dgasp_list_head = NULL; ++ ++} /* kerSysDeinitDyingGaspHandler */ ++ ++void kerSysRegisterDyingGaspHandler(char *devname, void *cbfn, void *context) ++{ ++ CB_DGASP_LIST *new_node; ++ ++ if( g_cb_dgasp_list_head == NULL) { ++ printk("Error: kerSysRegisterDyingGaspHandler: list head is null\n"); ++ return; ++ } ++ ++ if( devname == NULL || cbfn == NULL ) { ++ printk("Error: kerSysRegisterDyingGaspHandler: register info not enough (%s,%x,%x)\n", devname, (unsigned int)cbfn, (unsigned int)context); ++ return; ++ } ++ ++ new_node= (CB_DGASP_LIST *)kmalloc(sizeof(CB_DGASP_LIST), GFP_KERNEL); ++ memset(new_node, 0x00, sizeof(CB_DGASP_LIST)); ++ INIT_LIST_HEAD(&new_node->list); ++ strncpy(new_node->name, devname, IFNAMSIZ); ++ new_node->cb_dgasp_fn = (cb_dgasp_t)cbfn; ++ new_node->context = context; ++ list_add(&new_node->list, &g_cb_dgasp_list_head->list); ++ ++ printk("dgasp: kerSysRegisterDyingGaspHandler: %s registered \n", devname); ++ ++} /* kerSysRegisterDyingGaspHandler */ ++ ++void kerSysDeregisterDyingGaspHandler(char *devname) ++{ ++ struct list_head *pos; ++ CB_DGASP_LIST *tmp; ++ ++ if(g_cb_dgasp_list_head == NULL) { ++ printk("Error: kerSysDeregisterDyingGaspHandler: list head is null\n"); ++ return; ++ } ++ ++ if(devname == NULL) { ++ printk("Error: kerSysDeregisterDyingGaspHandler: devname is null\n"); ++ return; ++ } ++ ++ printk("kerSysDeregisterDyingGaspHandler: %s is deregistering\n", devname); ++ ++ list_for_each(pos, &g_cb_dgasp_list_head->list) { ++ tmp = list_entry(pos, CB_DGASP_LIST, list); ++ if(!strcmp(tmp->name, devname)) { ++ list_del(pos); ++ kfree(tmp); ++ printk("kerSysDeregisterDyingGaspHandler: %s is deregistered\n", devname); ++ return; ++ } ++ } ++ printk("kerSysDeregisterDyingGaspHandler: %s not (de)registered\n", devname); ++ ++} /* kerSysDeregisterDyingGaspHandler */ ++ ++//EXPORT_SYMBOL(kerSysNvRamGet); ++EXPORT_SYMBOL(kerSysGetMacAddress); ++EXPORT_SYMBOL(kerSysReleaseMacAddress); ++EXPORT_SYMBOL(kerSysGetSdramSize); ++EXPORT_SYMBOL(kerSysLedCtrl); ++EXPORT_SYMBOL(kerSysGetResetHold); ++EXPORT_SYMBOL(kerSysLedRegisterHwHandler); ++EXPORT_SYMBOL(BpGetBoardIds); ++EXPORT_SYMBOL(BpGetSdramSize); ++EXPORT_SYMBOL(BpGetPsiSize); ++EXPORT_SYMBOL(BpGetEthernetMacInfo); ++EXPORT_SYMBOL(BpGetRj11InnerOuterPairGpios); ++EXPORT_SYMBOL(BpGetPressAndHoldResetGpio); ++EXPORT_SYMBOL(BpGetVoipResetGpio); ++EXPORT_SYMBOL(BpGetVoipIntrGpio); ++EXPORT_SYMBOL(BpGetPcmciaResetGpio); ++EXPORT_SYMBOL(BpGetRtsCtsUartGpios); ++EXPORT_SYMBOL(BpGetAdslLedGpio); ++EXPORT_SYMBOL(BpGetAdslFailLedGpio); ++EXPORT_SYMBOL(BpGetWirelessLedGpio); ++EXPORT_SYMBOL(BpGetUsbLedGpio); ++EXPORT_SYMBOL(BpGetHpnaLedGpio); ++EXPORT_SYMBOL(BpGetWanDataLedGpio); ++EXPORT_SYMBOL(BpGetPppLedGpio); ++EXPORT_SYMBOL(BpGetPppFailLedGpio); ++EXPORT_SYMBOL(BpGetVoipLedGpio); ++EXPORT_SYMBOL(BpGetWirelessExtIntr); ++EXPORT_SYMBOL(BpGetAdslDyingGaspExtIntr); ++EXPORT_SYMBOL(BpGetVoipExtIntr); ++EXPORT_SYMBOL(BpGetHpnaExtIntr); ++EXPORT_SYMBOL(BpGetHpnaChipSelect); ++EXPORT_SYMBOL(BpGetVoipChipSelect); ++EXPORT_SYMBOL(BpGetWirelessSesBtnGpio); ++EXPORT_SYMBOL(BpGetWirelessSesExtIntr); ++EXPORT_SYMBOL(BpGetWirelessSesLedGpio); ++EXPORT_SYMBOL(kerSysRegisterDyingGaspHandler); ++EXPORT_SYMBOL(kerSysDeregisterDyingGaspHandler); ++EXPORT_SYMBOL(kerSysGetCycleCount); ++EXPORT_SYMBOL(kerSysSetWdTimer); ++EXPORT_SYMBOL(kerSysWakeupMonitorTask); ++ +diff -urN linux.old/arch/mips/bcm963xx/boardparms.c linux.dev/arch/mips/bcm963xx/boardparms.c +--- linux.old/arch/mips/bcm963xx/boardparms.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm963xx/boardparms.c 2006-08-25 00:39:38.000000000 +0200 +@@ -0,0 +1,2391 @@ ++/* ++<:copyright-gpl ++ ++ Copyright 2003 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++ ++:> ++*/ ++/************************************************************************** ++ * File Name : boardparms.c ++ * ++ * Description: This file contains the implementation for the BCM63xx board ++ * parameter access functions. ++ * ++ * Updates : 07/14/2003 Created. ++ ***************************************************************************/ ++ ++/* Includes. */ ++#include "boardparms.h" ++ ++/* Defines. */ ++ ++/* Default psi size in K bytes */ ++#define BP_PSI_DEFAULT_SIZE 24 ++ ++/* Typedefs */ ++typedef struct boardparameters ++{ ++ char szBoardId[BP_BOARD_ID_LEN]; /* board id string */ ++ ETHERNET_MAC_INFO EnetMacInfos[BP_MAX_ENET_MACS]; ++ VOIP_DSP_INFO VoIPDspInfo[BP_MAX_VOIP_DSP]; ++ unsigned short usSdramSize; /* SDRAM size and type */ ++ unsigned short usPsiSize; /* persistent storage in K bytes */ ++ unsigned short usGpioRj11InnerPair; /* GPIO pin or not defined */ ++ unsigned short usGpioRj11OuterPair; /* GPIO pin or not defined */ ++ unsigned short usGpioPressAndHoldReset; /* GPIO pin or not defined */ ++ unsigned short usGpioPcmciaReset; /* GPIO pin or not defined */ ++ unsigned short usGpioUartRts; /* GPIO pin or not defined */ ++ unsigned short usGpioUartCts; /* GPIO pin or not defined */ ++ unsigned short usGpioLedAdsl; /* GPIO pin or not defined */ ++ unsigned short usGpioLedAdslFail; /* GPIO pin or not defined */ ++ unsigned short usGpioLedWireless; /* GPIO pin or not defined */ ++ unsigned short usGpioLedUsb; /* GPIO pin or not defined */ ++ unsigned short usGpioLedHpna; /* GPIO pin or not defined */ ++ unsigned short usGpioLedWanData; /* GPIO pin or not defined */ ++ unsigned short usGpioLedPpp; /* GPIO pin or not defined */ ++ unsigned short usGpioLedPppFail; /* GPIO pin or not defined */ ++ unsigned short usGpioLedBlPowerOn; /* GPIO pin or not defined */ ++ unsigned short usGpioLedBlAlarm; /* GPIO pin or not defined */ ++ unsigned short usGpioLedBlResetCfg; /* GPIO pin or not defined */ ++ unsigned short usGpioLedBlStop; /* GPIO pin or not defined */ ++ unsigned short usExtIntrWireless; /* ext intr or not defined */ ++ unsigned short usExtIntrAdslDyingGasp; /* ext intr or not defined */ ++ unsigned short usExtIntrHpna; /* ext intr or not defined */ ++ unsigned short usCsHpna; /* chip select not defined */ ++ unsigned short usAntInUseWireless; /* antenna in use or not defined */ ++ unsigned short usGpioSesBtnWireless; /* GPIO pin or not defined */ ++ unsigned short usExtIntrSesBtnWireless; /* ext intr or not defined */ ++ unsigned short usGpioLedSesWireless; /* GPIO pin or not defined */ ++} BOARD_PARAMETERS, *PBOARD_PARAMETERS; ++ ++/* Variables */ ++#if defined(_BCM96338_) || defined(CONFIG_BCM96338) ++static BOARD_PARAMETERS g_bcm96338sv = ++{ ++ "96338SV", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_NOT_DEFINED, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_NOT_DEFINED, /* usGpioLedWanData */ ++ BP_NOT_DEFINED, /* usGpioLedPpp */ ++ BP_NOT_DEFINED, /* usGpioLedPppFail */ ++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_NOT_DEFINED, /* usGpioLedBlResetCfg */ ++ BP_NOT_DEFINED, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++static BOARD_PARAMETERS g_bcm96338l2m8m = ++{ ++ "96338L-2M-8M", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_GPIO_2_AL, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_3_AL, /* usGpioLedWanData */ ++ BP_GPIO_3_AL, /* usGpioLedPpp */ ++ BP_GPIO_4_AL, /* usGpioLedPppFail */ ++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ ++ BP_GPIO_1_AL, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++static PBOARD_PARAMETERS g_BoardParms[] = ++ {&g_bcm96338sv, &g_bcm96338l2m8m, 0}; ++#endif ++ ++#if defined(_BCM96345_) || defined(CONFIG_BCM96345) ++static BOARD_PARAMETERS g_bcm96345r = ++{ ++ "96345R", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_GPIO_11_AH, /* usGpioRj11InnerPair */ ++ BP_GPIO_12_AH, /* usGpioRj11OuterPair */ ++ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_GPIO_8_AH, /* usGpioLedAdsl */ ++ BP_NOT_DEFINED, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_8_AH, /* usGpioLedWanData */ ++ BP_GPIO_9_AH, /* usGpioLedPpp */ ++ BP_NOT_DEFINED, /* usGpioLedPppFail */ ++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ ++ BP_GPIO_10_AH, /* usGpioLedBlAlarm */ ++ BP_GPIO_9_AH, /* usGpioLedBlResetCfg */ ++ BP_GPIO_8_AH, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96345gw2 = ++{ ++ /* A hardware jumper determines whether GPIO 13 is used for Press and Hold ++ * Reset or RTS. ++ */ ++ "96345GW2", /* szBoardId */ ++ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ ++ 0x00, /* ucPhyAddress */ ++ BP_GPIO_0_AH, /* usGpioPhySpiSck */ ++ BP_GPIO_4_AH, /* usGpioPhySpiSs */ ++ BP_GPIO_12_AH, /* usGpioPhySpiMosi */ ++ BP_GPIO_11_AH, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x04, /* numSwitchPorts */ ++ BP_ENET_CONFIG_GPIO, /* usConfigType */ ++ BP_ENET_REVERSE_MII}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_DSP, /* ucDspType */ ++ 0x00, /* ucDspAddress */ ++ BP_EXT_INTR_1, /* usExtIntrVoip */ ++ BP_GPIO_6_AH, /* usGpioVoipReset */ ++ BP_GPIO_15_AH, /* usGpioVoipIntr */ ++ BP_NOT_DEFINED, /* usGpioLedVoip */ ++ BP_CS_2}, /* usCsVoip */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */ ++ BP_GPIO_2_AH, /* usGpioPcmciaReset */ ++ BP_GPIO_13_AH, /* usGpioUartRts */ ++ BP_GPIO_9_AH, /* usGpioUartCts */ ++ BP_GPIO_8_AH, /* usGpioLedAdsl */ ++ BP_NOT_DEFINED, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_GPIO_7_AH, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_8_AH, /* usGpioLedWanData */ ++ BP_NOT_DEFINED, /* usGpioLedPpp */ ++ BP_NOT_DEFINED, /* usGpioLedPppFail */ ++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ ++ BP_GPIO_10_AH, /* usGpioLedBlAlarm */ ++ BP_GPIO_7_AH, /* usGpioLedBlResetCfg */ ++ BP_GPIO_8_AH, /* usGpioLedBlStop */ ++ BP_EXT_INTR_2, /* usExtIntrWireless */ ++ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96345gw = ++{ ++ "96345GW", /* szBoardId */ ++ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ ++ 0x00, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x04, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_ENET_NO_REVERSE_MII}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_DSP, /* ucDspType */ ++ 0x00, /* ucDspAddress */ ++ BP_EXT_INTR_1, /* usExtIntrVoip */ ++ BP_GPIO_6_AH, /* usGpioVoipReset */ ++ BP_GPIO_15_AH, /* usGpioVoipIntr */ ++ BP_NOT_DEFINED, /* usGpioLedVoip */ ++ BP_CS_2}, /* usCsVoip */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_GPIO_11_AH, /* usGpioRj11InnerPair */ ++ BP_GPIO_1_AH, /* usGpioRj11OuterPair */ ++ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */ ++ BP_GPIO_2_AH, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_GPIO_8_AH, /* usGpioLedAdsl */ ++ BP_NOT_DEFINED, /* usGpioLedAdslFail */ ++ BP_GPIO_10_AH, /* usGpioLedWireless */ ++ BP_GPIO_7_AH, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_8_AH, /* usGpioLedWanData */ ++ BP_NOT_DEFINED, /* usGpioLedPpp */ ++ BP_NOT_DEFINED, /* usGpioLedPppFail */ ++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ ++ BP_GPIO_9_AH, /* usGpioLedBlAlarm */ ++ BP_GPIO_10_AH, /* usGpioLedBlResetCfg */ ++ BP_GPIO_8_AH, /* usGpioLedBlStop */ ++ BP_EXT_INTR_2, /* usExtIntrWireless */ ++ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */ ++ BP_EXT_INTR_3, /* usExtIntrHpna */ ++ BP_CS_1, /* usCsHpna */ ++ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96335r = ++{ ++ "96335R", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_14_AH, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_GPIO_9_AH, /* usGpioLedAdsl */ ++ BP_NOT_DEFINED, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_9_AH, /* usGpioLedWanData */ ++ BP_GPIO_8_AH, /* usGpioLedPpp */ ++ BP_NOT_DEFINED, /* usGpioLedPppFail */ ++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ ++ BP_GPIO_10_AH, /* usGpioLedBlAlarm */ ++ BP_GPIO_8_AH, /* usGpioLedBlResetCfg */ ++ BP_GPIO_9_AH, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96345r0 = ++{ ++ "96345R0", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_GPIO_8_AH, /* usGpioLedAdsl */ ++ BP_NOT_DEFINED, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_9_AH, /* usGpioLedWanData */ ++ BP_GPIO_9_AH, /* usGpioLedPpp */ ++ BP_NOT_DEFINED, /* usGpioLedPppFail */ ++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ ++ BP_GPIO_9_AH, /* usGpioLedBlAlarm */ ++ BP_GPIO_8_AH, /* usGpioLedBlResetCfg */ ++ BP_GPIO_8_AH, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96345rs = ++{ ++ "96345RS", /* szBoardId */ ++ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ ++ 0x00, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_ENET_NO_REVERSE_MII}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_GPIO_11_AH, /* usGpioRj11InnerPair */ ++ BP_GPIO_12_AH, /* usGpioRj11OuterPair */ ++ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_GPIO_8_AH, /* usGpioLedAdsl */ ++ BP_NOT_DEFINED, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_8_AH, /* usGpioLedWanData */ ++ BP_GPIO_9_AH, /* usGpioLedPpp */ ++ BP_NOT_DEFINED, /* usGpioLedPppFail */ ++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ ++ BP_GPIO_10_AH, /* usGpioLedBlAlarm */ ++ BP_GPIO_9_AH, /* usGpioLedBlResetCfg */ ++ BP_GPIO_8_AH, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static PBOARD_PARAMETERS g_BoardParms[] = ++ {&g_bcm96345r, &g_bcm96345gw2, &g_bcm96345gw, &g_bcm96335r, &g_bcm96345r0, ++ &g_bcm96345rs, 0}; ++#endif ++ ++#if defined(_BCM96348_) || defined(CONFIG_BCM96348) ++ ++static BOARD_PARAMETERS g_bcm96348r = ++{ ++ "96348R", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_7_AH, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_GPIO_2_AL, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_3_AL, /* usGpioLedWanData */ ++ BP_GPIO_3_AL, /* usGpioLedPpp */ ++ BP_GPIO_4_AL, /* usGpioLedPppFail */ ++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ ++ BP_GPIO_1_AL, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96348lv = ++{ ++ "96348LV", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_EXTERNAL_PHY, /* ucPhyType */ ++ 0x02, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_GPIO_5_AL, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}}, /* usReverseMii */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_7_AH, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_GPIO_2_AL, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_3_AL, /* usGpioLedWanData */ ++ BP_GPIO_3_AL, /* usGpioLedPpp */ ++ BP_GPIO_4_AL, /* usGpioLedPppFail */ ++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ ++ BP_GPIO_1_AL, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96348gw = ++{ ++ "96348GW", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ ++ 0x00, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x03, /* numSwitchPorts */ ++ BP_ENET_CONFIG_SPI_SSB_0, /* usConfigType */ ++ BP_ENET_REVERSE_MII}}, /* usReverseMii */ ++ {{BP_VOIP_DSP, /* ucDspType */ ++ 0x00, /* ucDspAddress */ ++ BP_EXT_INTR_2, /* usExtIntrVoip */ ++ BP_GPIO_6_AH, /* usGpioVoipReset */ ++ BP_GPIO_34_AH, /* usGpioVoipIntr */ ++ BP_NOT_DEFINED, /* usGpioLedVoip */ ++ BP_CS_2}, /* usCsVoip */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_GPIO_2_AL, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_3_AL, /* usGpioLedWanData */ ++ BP_GPIO_3_AL, /* usGpioLedPpp */ ++ BP_GPIO_4_AL, /* usGpioLedPppFail */ ++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ ++ BP_GPIO_1_AL, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* BP_GPIO_35_AH, */ /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* BP_EXT_INTR_3, */ /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* BP_GPIO_0_AL */ /* usGpioLedSesWireless */ ++}; ++ ++ ++static BOARD_PARAMETERS g_bcm96348gw_10 = ++{ ++ "96348GW-10", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ ++ 0x00, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x03, /* numSwitchPorts */ ++ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */ ++ BP_ENET_REVERSE_MII}}, /* usReverseMii */ ++ {{BP_VOIP_DSP, /* ucDspType */ ++ 0x00, /* ucDspAddress */ ++ BP_EXT_INTR_2, /* usExtIntrVoip */ ++ BP_GPIO_6_AH, /* usGpioVoipReset */ ++ BP_GPIO_34_AH, /* usGpioVoipIntr */ ++ BP_NOT_DEFINED, /* usGpioLedVoip */ ++ BP_CS_2}, /* usCsVoip */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_GPIO_2_AL, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_3_AL, /* usGpioLedWanData */ ++ BP_GPIO_3_AL, /* usGpioLedPpp */ ++ BP_GPIO_4_AL, /* usGpioLedPppFail */ ++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ ++ BP_GPIO_1_AL, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96348gw_11 = ++{ ++ "96348GW-11", /* szBoardId */ ++ {{BP_ENET_NO_PHY}, /* ucPhyType */ ++ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ ++ 0x00, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x04, /* numSwitchPorts */ ++ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */ ++ BP_ENET_REVERSE_MII}}, /* usReverseMii */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_GPIO_2_AL, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_3_AL, /* usGpioLedWanData */ ++ BP_GPIO_3_AL, /* usGpioLedPpp */ ++ BP_GPIO_4_AL, /* usGpioLedPppFail */ ++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ ++ BP_GPIO_1_AL, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96348sv = ++{ ++ "96348SV", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_EXTERNAL_PHY, /* ucPhyType */ ++ 0x1f, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}}, /* usReverseMii */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_32MB_2_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_NOT_DEFINED, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_NOT_DEFINED, /* usGpioLedWanData */ ++ BP_NOT_DEFINED, /* usGpioLedPpp */ ++ BP_NOT_DEFINED, /* usGpioLedPppFail */ ++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_NOT_DEFINED, /* usGpioLedBlResetCfg */ ++ BP_NOT_DEFINED, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++ ++static BOARD_PARAMETERS g_bcm96348gw_dualDsp = ++{ ++ "96348GW-DualDSP", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ ++ 0x00, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x03, /* numSwitchPorts */ ++ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */ ++ BP_ENET_REVERSE_MII}}, /* usReverseMii */ ++ {{BP_VOIP_DSP, /* ucDspType */ ++ 0x00, /* ucDspAddress */ ++ BP_EXT_INTR_2, /* usExtIntrVoip */ ++ BP_UNEQUIPPED, /* usGpioVoipReset */ ++ BP_GPIO_34_AH, /* usGpioVoipIntr */ ++ BP_NOT_DEFINED, /* usGpioLedVoip */ ++ BP_CS_2}, /* usCsVoip */ ++ {BP_VOIP_DSP, /* ucDspType */ ++ 0x01, /* ucDspAddress */ ++ BP_EXT_INTR_3, /* usExtIntrVoip */ ++ BP_UNEQUIPPED , /* usGpioVoipReset */ ++ BP_GPIO_35_AH, /* usGpioVoipIntr */ ++ BP_NOT_DEFINED, /* usGpioLedVoip */ ++ BP_CS_3}}, /* usCsVoip */ ++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_GPIO_2_AL, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_3_AL, /* usGpioLedWanData */ ++ BP_GPIO_3_AL, /* usGpioLedPpp */ ++ BP_GPIO_4_AL, /* usGpioLedPppFail */ ++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ ++ BP_GPIO_1_AL, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++ ++static BOARD_PARAMETERS g_bcmCustom_01 = ++{ ++ "BCMCUST_01", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_NO_PHY, /* ucPhyType */ ++ 0x00, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */ ++ BP_ENET_REVERSE_MII}}, /* usReverseMii */ ++ {{BP_VOIP_DSP, /* ucDspType */ ++ 0x00, /* ucDspAddress */ ++ BP_EXT_INTR_2, /* usExtIntrVoip */ ++ BP_GPIO_36_AH, /* usGpioVoipReset */ ++ BP_GPIO_34_AL, /* usGpioVoipIntr */ ++ BP_NOT_DEFINED, /* usGpioLedVoip */ ++ BP_CS_2}, /* usCsVoip */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_GPIO_2_AL, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_3_AL, /* usGpioLedWanData */ ++ BP_GPIO_3_AL, /* usGpioLedPpp */ ++ BP_GPIO_4_AL, /* usGpioLedPppFail */ ++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ ++ BP_GPIO_1_AL, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static PBOARD_PARAMETERS g_BoardParms[] = ++ {&g_bcm96348r, &g_bcm96348lv, &g_bcm96348gw, &g_bcm96348gw_10, ++ &g_bcm96348gw_11, &g_bcm96348sv, &g_bcm96348gw_dualDsp, ++ &g_bcmCustom_01, 0}; ++#endif ++ ++static PBOARD_PARAMETERS g_pCurrentBp = 0; ++ ++/************************************************************************** ++ * Name : bpstrcmp ++ * ++ * Description: String compare for this file so it does not depend on an OS. ++ * (Linux kernel and CFE share this source file.) ++ * ++ * Parameters : [IN] dest - destination string ++ * [IN] src - source string ++ * ++ * Returns : -1 - dest < src, 1 - dest > src, 0 dest == src ++ ***************************************************************************/ ++static int bpstrcmp(const char *dest,const char *src); ++static int bpstrcmp(const char *dest,const char *src) ++{ ++ while (*src && *dest) ++ { ++ if (*dest < *src) return -1; ++ if (*dest > *src) return 1; ++ dest++; ++ src++; ++ } ++ ++ if (*dest && !*src) return 1; ++ if (!*dest && *src) return -1; ++ return 0; ++} /* bpstrcmp */ ++ ++/************************************************************************** ++ * Name : BpGetVoipDspConfig ++ * ++ * Description: Gets the DSP configuration from the board parameter ++ * structure for a given DSP index. ++ * ++ * Parameters : [IN] dspNum - DSP index (number) ++ * ++ * Returns : Pointer to DSP configuration block if found/valid, NULL ++ * otherwise. ++ ***************************************************************************/ ++VOIP_DSP_INFO *BpGetVoipDspConfig( unsigned char dspNum ); ++VOIP_DSP_INFO *BpGetVoipDspConfig( unsigned char dspNum ) ++{ ++ VOIP_DSP_INFO *pDspConfig = 0; ++ int i; ++ ++ if( g_pCurrentBp ) ++ { ++ for( i = 0 ; i < BP_MAX_VOIP_DSP ; i++ ) ++ { ++ if( g_pCurrentBp->VoIPDspInfo[i].ucDspType != BP_VOIP_NO_DSP && ++ g_pCurrentBp->VoIPDspInfo[i].ucDspAddress == dspNum ) ++ { ++ pDspConfig = &g_pCurrentBp->VoIPDspInfo[i]; ++ break; ++ } ++ } ++ } ++ ++ return pDspConfig; ++} ++ ++ ++/************************************************************************** ++ * Name : BpSetBoardId ++ * ++ * Description: This function find the BOARD_PARAMETERS structure for the ++ * specified board id string and assigns it to a global, static ++ * variable. ++ * ++ * Parameters : [IN] pszBoardId - Board id string that is saved into NVRAM. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_FOUND - Error, board id input string does not ++ * have a board parameters configuration record. ++ ***************************************************************************/ ++int BpSetBoardId( char *pszBoardId ) ++{ ++ int nRet = BP_BOARD_ID_NOT_FOUND; ++ PBOARD_PARAMETERS *ppBp; ++ ++ for( ppBp = g_BoardParms; *ppBp; ppBp++ ) ++ { ++ if( !bpstrcmp((*ppBp)->szBoardId, pszBoardId) ) ++ { ++ g_pCurrentBp = *ppBp; ++ nRet = BP_SUCCESS; ++ break; ++ } ++ } ++ ++ return( nRet ); ++} /* BpSetBoardId */ ++ ++/************************************************************************** ++ * Name : BpGetBoardIds ++ * ++ * Description: This function returns all of the supported board id strings. ++ * ++ * Parameters : [OUT] pszBoardIds - Address of a buffer that the board id ++ * strings are returned in. Each id starts at BP_BOARD_ID_LEN ++ * boundary. ++ * [IN] nBoardIdsSize - Number of BP_BOARD_ID_LEN elements that ++ * were allocated in pszBoardIds. ++ * ++ * Returns : Number of board id strings returned. ++ ***************************************************************************/ ++int BpGetBoardIds( char *pszBoardIds, int nBoardIdsSize ) ++{ ++ PBOARD_PARAMETERS *ppBp; ++ int i; ++ char *src; ++ char *dest; ++ ++ for( i = 0, ppBp = g_BoardParms; *ppBp && nBoardIdsSize; ++ i++, ppBp++, nBoardIdsSize--, pszBoardIds += BP_BOARD_ID_LEN ) ++ { ++ dest = pszBoardIds; ++ src = (*ppBp)->szBoardId; ++ while( *src ) ++ *dest++ = *src++; ++ *dest = '\0'; ++ } ++ ++ return( i ); ++} /* BpGetBoardIds */ ++ ++/************************************************************************** ++ * Name : BpGetEthernetMacInfo ++ * ++ * Description: This function returns all of the supported board id strings. ++ * ++ * Parameters : [OUT] pEnetInfos - Address of an array of ETHERNET_MAC_INFO ++ * buffers. ++ * [IN] nNumEnetInfos - Number of ETHERNET_MAC_INFO elements that ++ * are pointed to by pEnetInfos. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ ***************************************************************************/ ++int BpGetEthernetMacInfo( PETHERNET_MAC_INFO pEnetInfos, int nNumEnetInfos ) ++{ ++ int i, nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ for( i = 0; i < nNumEnetInfos; i++, pEnetInfos++ ) ++ { ++ if( i < BP_MAX_ENET_MACS ) ++ { ++ unsigned char *src = (unsigned char *) ++ &g_pCurrentBp->EnetMacInfos[i]; ++ unsigned char *dest = (unsigned char *) pEnetInfos; ++ int len = sizeof(ETHERNET_MAC_INFO); ++ while( len-- ) ++ *dest++ = *src++; ++ } ++ else ++ pEnetInfos->ucPhyType = BP_ENET_NO_PHY; ++ } ++ ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ for( i = 0; i < nNumEnetInfos; i++, pEnetInfos++ ) ++ pEnetInfos->ucPhyType = BP_ENET_NO_PHY; ++ ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetEthernetMacInfo */ ++ ++/************************************************************************** ++ * Name : BpGetSdramSize ++ * ++ * Description: This function returns a constant that describees the board's ++ * SDRAM type and size. ++ * ++ * Parameters : [OUT] pulSdramSize - Address of short word that the SDRAM size ++ * is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ ***************************************************************************/ ++int BpGetSdramSize( unsigned long *pulSdramSize ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pulSdramSize = g_pCurrentBp->usSdramSize; ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ *pulSdramSize = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetSdramSize */ ++ ++/************************************************************************** ++ * Name : BpGetPsiSize ++ * ++ * Description: This function returns the persistent storage size in K bytes. ++ * ++ * Parameters : [OUT] pulPsiSize - Address of short word that the persistent ++ * storage size is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ ***************************************************************************/ ++int BpGetPsiSize( unsigned long *pulPsiSize ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pulPsiSize = g_pCurrentBp->usPsiSize; ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ *pulPsiSize = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetPsiSize */ ++ ++/************************************************************************** ++ * Name : BpGetRj11InnerOuterPairGpios ++ * ++ * Description: This function returns the GPIO pin assignments for changing ++ * between the RJ11 inner pair and RJ11 outer pair. ++ * ++ * Parameters : [OUT] pusInner - Address of short word that the RJ11 inner pair ++ * GPIO pin is returned in. ++ * [OUT] pusOuter - Address of short word that the RJ11 outer pair ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, values are returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetRj11InnerOuterPairGpios( unsigned short *pusInner, ++ unsigned short *pusOuter ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusInner = g_pCurrentBp->usGpioRj11InnerPair; ++ *pusOuter = g_pCurrentBp->usGpioRj11OuterPair; ++ ++ if( g_pCurrentBp->usGpioRj11InnerPair != BP_NOT_DEFINED && ++ g_pCurrentBp->usGpioRj11OuterPair != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusInner = *pusOuter = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetRj11InnerOuterPairGpios */ ++ ++/************************************************************************** ++ * Name : BpGetPressAndHoldResetGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the press ++ * and hold reset button. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the press and hold ++ * reset button GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetPressAndHoldResetGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioPressAndHoldReset; ++ ++ if( g_pCurrentBp->usGpioPressAndHoldReset != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetPressAndHoldResetGpio */ ++ ++/************************************************************************** ++ * Name : BpGetVoipResetGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the VOIP ++ * Reset operation. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the VOIP reset ++ * GPIO pin is returned in. ++ * [IN] dspNum - Address of the DSP to query. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipResetGpio( unsigned char dspNum, unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum ); ++ ++ if( pDspInfo ) ++ { ++ *pusValue = pDspInfo->usGpioVoipReset; ++ ++ if( *pusValue != BP_NOT_DEFINED || ++ *pusValue == BP_UNEQUIPPED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_FOUND; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetVoipResetGpio */ ++ ++/************************************************************************** ++ * Name : BpGetVoipIntrGpio ++ * ++ * Description: This function returns the GPIO pin assignment for VoIP interrupt. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the VOIP interrupt ++ * GPIO pin is returned in. ++ * [IN] dspNum - Address of the DSP to query. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipIntrGpio( unsigned char dspNum, unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum ); ++ ++ if( pDspInfo ) ++ { ++ *pusValue = pDspInfo->usGpioVoipIntr; ++ ++ if( *pusValue != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_FOUND; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetVoipIntrGpio */ ++ ++/************************************************************************** ++ * Name : BpGetPcmciaResetGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the PCMCIA ++ * Reset operation. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the PCMCIA reset ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetPcmciaResetGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioPcmciaReset; ++ ++ if( g_pCurrentBp->usGpioPcmciaReset != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetPcmciaResetGpio */ ++ ++/************************************************************************** ++ * Name : BpGetUartRtsCtsGpios ++ * ++ * Description: This function returns the GPIO pin assignments for RTS and CTS ++ * UART signals. ++ * ++ * Parameters : [OUT] pusRts - Address of short word that the UART RTS GPIO ++ * pin is returned in. ++ * [OUT] pusCts - Address of short word that the UART CTS GPIO ++ * pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, values are returned. ++ * BP_BOARD_ID_NOT_SET - Error, board id input string does not ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetRtsCtsUartGpios( unsigned short *pusRts, unsigned short *pusCts ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusRts = g_pCurrentBp->usGpioUartRts; ++ *pusCts = g_pCurrentBp->usGpioUartCts; ++ ++ if( g_pCurrentBp->usGpioUartRts != BP_NOT_DEFINED && ++ g_pCurrentBp->usGpioUartCts != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusRts = *pusCts = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetUartRtsCtsGpios */ ++ ++/************************************************************************** ++ * Name : BpGetAdslLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the ADSL ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetAdslLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedAdsl; ++ ++ if( g_pCurrentBp->usGpioLedAdsl != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetAdslLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetAdslFailLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the ADSL ++ * LED that is used when there is a DSL connection failure. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetAdslFailLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedAdslFail; ++ ++ if( g_pCurrentBp->usGpioLedAdslFail != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetAdslFailLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetWirelessLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the Wireless ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedWireless; ++ ++ if( g_pCurrentBp->usGpioLedWireless != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetWirelessLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetWirelessAntInUse ++ * ++ * Description: This function returns the antennas in use for wireless ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Antenna ++ * is in use. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessAntInUse( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usAntInUseWireless; ++ ++ if( g_pCurrentBp->usAntInUseWireless != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetWirelessAntInUse */ ++ ++/************************************************************************** ++ * Name : BpGetWirelessSesBtnGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the Wireless ++ * Ses Button. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessSesBtnGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioSesBtnWireless; ++ ++ if( g_pCurrentBp->usGpioSesBtnWireless != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetWirelessSesBtnGpio */ ++ ++/************************************************************************** ++ * Name : BpGetWirelessSesExtIntr ++ * ++ * Description: This function returns the external interrupt number for the ++ * Wireless Ses Button. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses ++ * external interrup is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessSesExtIntr( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usExtIntrSesBtnWireless; ++ ++ if( g_pCurrentBp->usExtIntrSesBtnWireless != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++ ++} /* BpGetWirelessSesExtIntr */ ++ ++/************************************************************************** ++ * Name : BpGetWirelessSesLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the Wireless ++ * Ses Led. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses ++ * Led GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessSesLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedSesWireless; ++ ++ if( g_pCurrentBp->usGpioLedSesWireless != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++ ++} /* BpGetWirelessSesLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetUsbLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the USB ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the USB LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetUsbLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedUsb; ++ ++ if( g_pCurrentBp->usGpioLedUsb != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetUsbLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetHpnaLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the HPNA ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the HPNA LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetHpnaLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedHpna; ++ ++ if( g_pCurrentBp->usGpioLedHpna != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetHpnaLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetWanDataLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the WAN Data ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the WAN Data LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWanDataLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedWanData; ++ ++ if( g_pCurrentBp->usGpioLedWanData != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetWanDataLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetPppLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the PPP ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the PPP LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetPppLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedPpp; ++ ++ if( g_pCurrentBp->usGpioLedPpp != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetPppLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetPppFailLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the PPP ++ * LED that is used when there is a PPP connection failure. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the PPP LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetPppFailLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedPppFail; ++ ++ if( g_pCurrentBp->usGpioLedPppFail != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetPppFailLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetBootloaderPowerOnLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the power ++ * on LED that is set by the bootloader. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the alarm LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetBootloaderPowerOnLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedBlPowerOn; ++ ++ if( g_pCurrentBp->usGpioLedBlPowerOn != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetBootloaderPowerOn */ ++ ++/************************************************************************** ++ * Name : BpGetBootloaderAlarmLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the alarm ++ * LED that is set by the bootloader. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the alarm LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetBootloaderAlarmLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedBlAlarm; ++ ++ if( g_pCurrentBp->usGpioLedBlAlarm != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetBootloaderAlarmLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetBootloaderResetCfgLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the reset ++ * configuration LED that is set by the bootloader. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the reset ++ * configuration LED GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetBootloaderResetCfgLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedBlResetCfg; ++ ++ if( g_pCurrentBp->usGpioLedBlResetCfg != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetBootloaderResetCfgLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetBootloaderStopLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the break ++ * into bootloader LED that is set by the bootloader. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the break into ++ * bootloader LED GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetBootloaderStopLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedBlStop; ++ ++ if( g_pCurrentBp->usGpioLedBlStop != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetBootloaderStopLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetVoipLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the VOIP ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the VOIP LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ * ++ * Note : The VoIP structure would allow for having one LED per DSP ++ * however, the board initialization function assumes only one ++ * LED per functionality (ie one LED for VoIP). Therefore in ++ * order to keep this tidy and simple we do not make usage of the ++ * one-LED-per-DSP function. Instead, we assume that the LED for ++ * VoIP is unique and associated with DSP 0 (always present on ++ * any VoIP platform). If changing this to a LED-per-DSP function ++ * then one need to update the board initialization driver in ++ * bcmdrivers\opensource\char\board\bcm963xx\impl1 ++ ***************************************************************************/ ++int BpGetVoipLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( 0 ); ++ ++ if( pDspInfo ) ++ { ++ *pusValue = pDspInfo->usGpioLedVoip; ++ ++ if( *pusValue != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_FOUND; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetVoipLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetWirelessExtIntr ++ * ++ * Description: This function returns the Wireless external interrupt number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the wireless ++ * external interrupt number is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessExtIntr( unsigned long *pulValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pulValue = g_pCurrentBp->usExtIntrWireless; ++ ++ if( g_pCurrentBp->usExtIntrWireless != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pulValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetWirelessExtIntr */ ++ ++/************************************************************************** ++ * Name : BpGetAdslDyingGaspExtIntr ++ * ++ * Description: This function returns the ADSL Dying Gasp external interrupt ++ * number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the ADSL Dying Gasp ++ * external interrupt number is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetAdslDyingGaspExtIntr( unsigned long *pulValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pulValue = g_pCurrentBp->usExtIntrAdslDyingGasp; ++ ++ if( g_pCurrentBp->usExtIntrAdslDyingGasp != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pulValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetAdslDyingGaspExtIntr */ ++ ++/************************************************************************** ++ * Name : BpGetVoipExtIntr ++ * ++ * Description: This function returns the VOIP external interrupt number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the VOIP ++ * external interrupt number is returned in. ++ * [IN] dspNum - Address of the DSP to query. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipExtIntr( unsigned char dspNum, unsigned long *pulValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum ); ++ ++ if( pDspInfo ) ++ { ++ *pulValue = pDspInfo->usExtIntrVoip; ++ ++ if( *pulValue != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pulValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_FOUND; ++ } ++ } ++ else ++ { ++ *pulValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetVoipExtIntr */ ++ ++/************************************************************************** ++ * Name : BpGetHpnaExtIntr ++ * ++ * Description: This function returns the HPNA external interrupt number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the HPNA ++ * external interrupt number is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetHpnaExtIntr( unsigned long *pulValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pulValue = g_pCurrentBp->usExtIntrHpna; ++ ++ if( g_pCurrentBp->usExtIntrHpna != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pulValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetHpnaExtIntr */ ++ ++/************************************************************************** ++ * Name : BpGetHpnaChipSelect ++ * ++ * Description: This function returns the HPNA chip select number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the HPNA ++ * chip select number is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetHpnaChipSelect( unsigned long *pulValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pulValue = g_pCurrentBp->usCsHpna; ++ ++ if( g_pCurrentBp->usCsHpna != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pulValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetHpnaChipSelect */ ++ ++/************************************************************************** ++ * Name : BpGetVoipChipSelect ++ * ++ * Description: This function returns the VOIP chip select number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the VOIP ++ * chip select number is returned in. ++ * [IN] dspNum - Address of the DSP to query. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipChipSelect( unsigned char dspNum, unsigned long *pulValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum ); ++ ++ if( pDspInfo ) ++ { ++ *pulValue = pDspInfo->usCsVoip; ++ ++ if( *pulValue != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pulValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_FOUND; ++ } ++ } ++ else ++ { ++ *pulValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetVoipChipSelect */ ++ +diff -urN linux.old/arch/mips/bcm963xx/boardparms.h linux.dev/arch/mips/bcm963xx/boardparms.h +--- linux.old/arch/mips/bcm963xx/boardparms.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm963xx/boardparms.h 2006-08-25 00:39:38.000000000 +0200 +@@ -0,0 +1,758 @@ ++/* ++<:copyright-gpl ++ ++ Copyright 2003 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++ ++:> ++*/ ++/************************************************************************** ++ * File Name : boardparms.h ++ * ++ * Description: This file contains definitions and function prototypes for ++ * the BCM63xx board parameter access functions. ++ * ++ * Updates : 07/14/2003 Created. ++ ***************************************************************************/ ++ ++#if !defined(_BOARDPARMS_H) ++#define _BOARDPARMS_H ++ ++/* Return codes. */ ++#define BP_SUCCESS 0 ++#define BP_BOARD_ID_NOT_FOUND 1 ++#define BP_VALUE_NOT_DEFINED 2 ++#define BP_BOARD_ID_NOT_SET 3 ++ ++/* Values for BpGetSdramSize. */ ++#define BP_MEMORY_8MB_1_CHIP 0 ++#define BP_MEMORY_16MB_1_CHIP 1 ++#define BP_MEMORY_32MB_1_CHIP 2 ++#define BP_MEMORY_64MB_2_CHIP 3 ++#define BP_MEMORY_32MB_2_CHIP 4 ++#define BP_MEMORY_16MB_2_CHIP 5 ++ ++/* Values for EthernetMacInfo PhyType. */ ++#define BP_ENET_NO_PHY 0 ++#define BP_ENET_INTERNAL_PHY 1 ++#define BP_ENET_EXTERNAL_PHY 2 ++#define BP_ENET_EXTERNAL_SWITCH 3 ++ ++/* Values for EthernetMacInfo Configuration type. */ ++#define BP_ENET_CONFIG_MDIO 0 /* Internal PHY, External PHY, Switch+(no GPIO, no SPI, no MDIO Pseudo phy */ ++#define BP_ENET_CONFIG_GPIO 1 /* Bcm96345GW board + Bcm5325M/E */ ++#define BP_ENET_CONFIG_MDIO_PSEUDO_PHY 2 /* Bcm96348GW board + Bcm5325E */ ++#define BP_ENET_CONFIG_SPI_SSB_0 3 /* Bcm96348GW board + Bcm5325M/E */ ++#define BP_ENET_CONFIG_SPI_SSB_1 4 /* Bcm96348GW board + Bcm5325M/E */ ++#define BP_ENET_CONFIG_SPI_SSB_2 5 /* Bcm96348GW board + Bcm5325M/E */ ++#define BP_ENET_CONFIG_SPI_SSB_3 6 /* Bcm96348GW board + Bcm5325M/E */ ++ ++/* Values for EthernetMacInfo Reverse MII. */ ++#define BP_ENET_NO_REVERSE_MII 0 ++#define BP_ENET_REVERSE_MII 1 ++ ++/* Values for VoIPDSPInfo DSPType. */ ++#define BP_VOIP_NO_DSP 0 ++#define BP_VOIP_DSP 1 ++ ++ ++/* Values for GPIO pin assignments (AH = Active High, AL = Active Low). */ ++#define BP_ACTIVE_MASK 0x8000 ++#define BP_ACTIVE_HIGH 0x0000 ++#define BP_ACTIVE_LOW 0x8000 ++#define BP_GPIO_0_AH (0 | BP_ACTIVE_HIGH) ++#define BP_GPIO_0_AL (0 | BP_ACTIVE_LOW) ++#define BP_GPIO_1_AH (1 | BP_ACTIVE_HIGH) ++#define BP_GPIO_1_AL (1 | BP_ACTIVE_LOW) ++#define BP_GPIO_2_AH (2 | BP_ACTIVE_HIGH) ++#define BP_GPIO_2_AL (2 | BP_ACTIVE_LOW) ++#define BP_GPIO_3_AH (3 | BP_ACTIVE_HIGH) ++#define BP_GPIO_3_AL (3 | BP_ACTIVE_LOW) ++#define BP_GPIO_4_AH (4 | BP_ACTIVE_HIGH) ++#define BP_GPIO_4_AL (4 | BP_ACTIVE_LOW) ++#define BP_GPIO_5_AH (5 | BP_ACTIVE_HIGH) ++#define BP_GPIO_5_AL (5 | BP_ACTIVE_LOW) ++#define BP_GPIO_6_AH (6 | BP_ACTIVE_HIGH) ++#define BP_GPIO_6_AL (6 | BP_ACTIVE_LOW) ++#define BP_GPIO_7_AH (7 | BP_ACTIVE_HIGH) ++#define BP_GPIO_7_AL (7 | BP_ACTIVE_LOW) ++#define BP_GPIO_8_AH (8 | BP_ACTIVE_HIGH) ++#define BP_GPIO_8_AL (8 | BP_ACTIVE_LOW) ++#define BP_GPIO_9_AH (9 | BP_ACTIVE_HIGH) ++#define BP_GPIO_9_AL (9 | BP_ACTIVE_LOW) ++#define BP_GPIO_10_AH (10 | BP_ACTIVE_HIGH) ++#define BP_GPIO_10_AL (10 | BP_ACTIVE_LOW) ++#define BP_GPIO_11_AH (11 | BP_ACTIVE_HIGH) ++#define BP_GPIO_11_AL (11 | BP_ACTIVE_LOW) ++#define BP_GPIO_12_AH (12 | BP_ACTIVE_HIGH) ++#define BP_GPIO_12_AL (12 | BP_ACTIVE_LOW) ++#define BP_GPIO_13_AH (13 | BP_ACTIVE_HIGH) ++#define BP_GPIO_13_AL (13 | BP_ACTIVE_LOW) ++#define BP_GPIO_14_AH (14 | BP_ACTIVE_HIGH) ++#define BP_GPIO_14_AL (14 | BP_ACTIVE_LOW) ++#define BP_GPIO_15_AH (15 | BP_ACTIVE_HIGH) ++#define BP_GPIO_15_AL (15 | BP_ACTIVE_LOW) ++#define BP_GPIO_16_AH (16 | BP_ACTIVE_HIGH) ++#define BP_GPIO_16_AL (16 | BP_ACTIVE_LOW) ++#define BP_GPIO_17_AH (17 | BP_ACTIVE_HIGH) ++#define BP_GPIO_17_AL (17 | BP_ACTIVE_LOW) ++#define BP_GPIO_18_AH (18 | BP_ACTIVE_HIGH) ++#define BP_GPIO_18_AL (18 | BP_ACTIVE_LOW) ++#define BP_GPIO_19_AH (19 | BP_ACTIVE_HIGH) ++#define BP_GPIO_19_AL (19 | BP_ACTIVE_LOW) ++#define BP_GPIO_20_AH (20 | BP_ACTIVE_HIGH) ++#define BP_GPIO_20_AL (20 | BP_ACTIVE_LOW) ++#define BP_GPIO_21_AH (21 | BP_ACTIVE_HIGH) ++#define BP_GPIO_21_AL (21 | BP_ACTIVE_LOW) ++#define BP_GPIO_22_AH (22 | BP_ACTIVE_HIGH) ++#define BP_GPIO_22_AL (22 | BP_ACTIVE_LOW) ++#define BP_GPIO_23_AH (23 | BP_ACTIVE_HIGH) ++#define BP_GPIO_23_AL (23 | BP_ACTIVE_LOW) ++#define BP_GPIO_24_AH (24 | BP_ACTIVE_HIGH) ++#define BP_GPIO_24_AL (24 | BP_ACTIVE_LOW) ++#define BP_GPIO_25_AH (25 | BP_ACTIVE_HIGH) ++#define BP_GPIO_25_AL (25 | BP_ACTIVE_LOW) ++#define BP_GPIO_26_AH (26 | BP_ACTIVE_HIGH) ++#define BP_GPIO_26_AL (26 | BP_ACTIVE_LOW) ++#define BP_GPIO_27_AH (27 | BP_ACTIVE_HIGH) ++#define BP_GPIO_27_AL (27 | BP_ACTIVE_LOW) ++#define BP_GPIO_28_AH (28 | BP_ACTIVE_HIGH) ++#define BP_GPIO_28_AL (28 | BP_ACTIVE_LOW) ++#define BP_GPIO_29_AH (29 | BP_ACTIVE_HIGH) ++#define BP_GPIO_29_AL (29 | BP_ACTIVE_LOW) ++#define BP_GPIO_30_AH (30 | BP_ACTIVE_HIGH) ++#define BP_GPIO_30_AL (30 | BP_ACTIVE_LOW) ++#define BP_GPIO_31_AH (31 | BP_ACTIVE_HIGH) ++#define BP_GPIO_31_AL (31 | BP_ACTIVE_LOW) ++#define BP_GPIO_32_AH (32 | BP_ACTIVE_HIGH) ++#define BP_GPIO_32_AL (32 | BP_ACTIVE_LOW) ++#define BP_GPIO_33_AH (33 | BP_ACTIVE_HIGH) ++#define BP_GPIO_33_AL (33 | BP_ACTIVE_LOW) ++#define BP_GPIO_34_AH (34 | BP_ACTIVE_HIGH) ++#define BP_GPIO_34_AL (34 | BP_ACTIVE_LOW) ++#define BP_GPIO_35_AH (35 | BP_ACTIVE_HIGH) ++#define BP_GPIO_35_AL (35 | BP_ACTIVE_LOW) ++#define BP_GPIO_36_AH (36 | BP_ACTIVE_HIGH) ++#define BP_GPIO_36_AL (36 | BP_ACTIVE_LOW) ++ ++/* Values for external interrupt assignments. */ ++#define BP_EXT_INTR_0 0 ++#define BP_EXT_INTR_1 1 ++#define BP_EXT_INTR_2 2 ++#define BP_EXT_INTR_3 3 ++ ++/* Values for chip select assignments. */ ++#define BP_CS_0 0 ++#define BP_CS_1 1 ++#define BP_CS_2 2 ++#define BP_CS_3 3 ++ ++/* Value for GPIO and external interrupt fields that are not used. */ ++#define BP_NOT_DEFINED 0xffff ++#define BP_HW_DEFINED 0xfff0 ++#define BP_UNEQUIPPED 0xfff1 ++ ++/* Maximum size of the board id string. */ ++#define BP_BOARD_ID_LEN 16 ++ ++/* Maximum number of Ethernet MACs. */ ++#define BP_MAX_ENET_MACS 2 ++ ++/* Maximum number of VoIP DSPs. */ ++#define BP_MAX_VOIP_DSP 2 ++ ++/* Wireless Antenna Settings. */ ++#define BP_WLAN_ANT_MAIN 0 ++#define BP_WLAN_ANT_AUX 1 ++#define BP_WLAN_ANT_BOTH 3 ++ ++#if !defined(__ASSEMBLER__) ++ ++/* Information about an Ethernet MAC. If ucPhyType is BP_ENET_NO_PHY, ++ * then the other fields are not valid. ++ */ ++typedef struct EthernetMacInfo ++{ ++ unsigned char ucPhyType; /* BP_ENET_xxx */ ++ unsigned char ucPhyAddress; /* 0 to 31 */ ++ unsigned short usGpioPhySpiSck; /* GPIO pin or not defined */ ++ unsigned short usGpioPhySpiSs; /* GPIO pin or not defined */ ++ unsigned short usGpioPhySpiMosi; /* GPIO pin or not defined */ ++ unsigned short usGpioPhySpiMiso; /* GPIO pin or not defined */ ++ unsigned short usGpioPhyReset; /* GPIO pin or not defined (96348LV) */ ++ unsigned short numSwitchPorts; /* Number of PHY ports */ ++ unsigned short usConfigType; /* Configuration type */ ++ unsigned short usReverseMii; /* Reverse MII */ ++} ETHERNET_MAC_INFO, *PETHERNET_MAC_INFO; ++ ++ ++/* Information about VoIP DSPs. If ucDspType is BP_VOIP_NO_DSP, ++ * then the other fields are not valid. ++ */ ++typedef struct VoIPDspInfo ++{ ++ unsigned char ucDspType; ++ unsigned char ucDspAddress; ++ unsigned short usExtIntrVoip; ++ unsigned short usGpioVoipReset; ++ unsigned short usGpioVoipIntr; ++ unsigned short usGpioLedVoip; ++ unsigned short usCsVoip; ++ ++} VOIP_DSP_INFO; ++ ++ ++/************************************************************************** ++ * Name : BpSetBoardId ++ * ++ * Description: This function find the BOARD_PARAMETERS structure for the ++ * specified board id string and assigns it to a global, static ++ * variable. ++ * ++ * Parameters : [IN] pszBoardId - Board id string that is saved into NVRAM. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_FOUND - Error, board id input string does not ++ * have a board parameters configuration record. ++ ***************************************************************************/ ++int BpSetBoardId( char *pszBoardId ); ++ ++/************************************************************************** ++ * Name : BpGetBoardIds ++ * ++ * Description: This function returns all of the supported board id strings. ++ * ++ * Parameters : [OUT] pszBoardIds - Address of a buffer that the board id ++ * strings are returned in. Each id starts at BP_BOARD_ID_LEN ++ * boundary. ++ * [IN] nBoardIdsSize - Number of BP_BOARD_ID_LEN elements that ++ * were allocated in pszBoardIds. ++ * ++ * Returns : Number of board id strings returned. ++ ***************************************************************************/ ++int BpGetBoardIds( char *pszBoardIds, int nBoardIdsSize ); ++ ++/************************************************************************** ++ * Name : BpGetEthernetMacInfo ++ * ++ * Description: This function returns all of the supported board id strings. ++ * ++ * Parameters : [OUT] pEnetInfos - Address of an array of ETHERNET_MAC_INFO ++ * buffers. ++ * [IN] nNumEnetInfos - Number of ETHERNET_MAC_INFO elements that ++ * are pointed to by pEnetInfos. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ ***************************************************************************/ ++int BpGetEthernetMacInfo( PETHERNET_MAC_INFO pEnetInfos, int nNumEnetInfos ); ++ ++/************************************************************************** ++ * Name : BpGetSdramSize ++ * ++ * Description: This function returns a constant that describees the board's ++ * SDRAM type and size. ++ * ++ * Parameters : [OUT] pulSdramSize - Address of short word that the SDRAM size ++ * is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ ***************************************************************************/ ++int BpGetSdramSize( unsigned long *pulSdramSize ); ++ ++/************************************************************************** ++ * Name : BpGetPsiSize ++ * ++ * Description: This function returns the persistent storage size in K bytes. ++ * ++ * Parameters : [OUT] pulPsiSize - Address of short word that the persistent ++ * storage size is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ ***************************************************************************/ ++int BpGetPsiSize( unsigned long *pulPsiSize ); ++ ++/************************************************************************** ++ * Name : BpGetRj11InnerOuterPairGpios ++ * ++ * Description: This function returns the GPIO pin assignments for changing ++ * between the RJ11 inner pair and RJ11 outer pair. ++ * ++ * Parameters : [OUT] pusInner - Address of short word that the RJ11 inner pair ++ * GPIO pin is returned in. ++ * [OUT] pusOuter - Address of short word that the RJ11 outer pair ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, values are returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetRj11InnerOuterPairGpios( unsigned short *pusInner, ++ unsigned short *pusOuter ); ++ ++/************************************************************************** ++ * Name : BpGetPressAndHoldResetGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the press ++ * and hold reset button. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the press and hold ++ * reset button GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetPressAndHoldResetGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetVoipResetGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the VOIP ++ * Reset operation. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the VOIP reset ++ * GPIO pin is returned in. ++ * [IN] dspNum - Address of the DSP to query. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipResetGpio( unsigned char dspNum, unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetVoipIntrGpio ++ * ++ * Description: This function returns the GPIO pin assignment for VoIP interrupt. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the VOIP interrupt ++ * GPIO pin is returned in. ++ * [IN] dspNum - Address of the DSP to query. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipIntrGpio( unsigned char dspNum, unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetPcmciaResetGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the PCMCIA ++ * Reset operation. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the PCMCIA reset ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetPcmciaResetGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetUartRtsCtsGpios ++ * ++ * Description: This function returns the GPIO pin assignments for RTS and CTS ++ * UART signals. ++ * ++ * Parameters : [OUT] pusRts - Address of short word that the UART RTS GPIO ++ * pin is returned in. ++ * [OUT] pusCts - Address of short word that the UART CTS GPIO ++ * pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, values are returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetRtsCtsUartGpios( unsigned short *pusRts, unsigned short *pusCts ); ++ ++/************************************************************************** ++ * Name : BpGetAdslLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the ADSL ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetAdslLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetAdslFailLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the ADSL ++ * LED that is used when there is a DSL connection failure. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetAdslFailLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetWirelessLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the Wireless ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetWirelessAntInUse ++ * ++ * Description: This function returns the antennas in use for wireless ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Antenna ++ * is in use. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessAntInUse( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetWirelessSesBtnGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the Wireless ++ * Ses Button. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses ++ * Button GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessSesBtnGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetWirelessSesExtIntr ++ * ++ * Description: This function returns the external interrupt number for the ++ * Wireless Ses Button. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses ++ * external interrup is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessSesExtIntr( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetWirelessSesLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the Wireless ++ * Ses Led. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses ++ * Led GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessSesLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetUsbLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the USB ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the USB LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetUsbLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetHpnaLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the HPNA ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the HPNA LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetHpnaLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetWanDataLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the WAN Data ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the WAN Data LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWanDataLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetPppLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the PPP ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the PPP LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetPppLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetPppFailLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the PPP ++ * LED that is used when there is a PPP connection failure. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the PPP LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetPppFailLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetVoipLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the VOIP ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the VOIP LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetBootloaderPowerOnLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the power ++ * on LED that is set by the bootloader. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the alarm LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetBootloaderPowerOnLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetBootloaderAlarmLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the alarm ++ * LED that is set by the bootloader. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the alarm LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetBootloaderAlarmLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetBootloaderResetCfgLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the reset ++ * configuration LED that is set by the bootloader. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the reset ++ * configuration LED GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetBootloaderResetCfgLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetBootloaderStopLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the break ++ * into bootloader LED that is set by the bootloader. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the break into ++ * bootloader LED GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetBootloaderStopLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetWirelessExtIntr ++ * ++ * Description: This function returns the Wireless external interrupt number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the wireless ++ * external interrupt number is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessExtIntr( unsigned long *pulValue ); ++ ++/************************************************************************** ++ * Name : BpGetAdslDyingGaspExtIntr ++ * ++ * Description: This function returns the ADSL Dying Gasp external interrupt ++ * number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the ADSL Dying Gasp ++ * external interrupt number is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetAdslDyingGaspExtIntr( unsigned long *pulValue ); ++ ++/************************************************************************** ++ * Name : BpGetVoipExtIntr ++ * ++ * Description: This function returns the VOIP external interrupt number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the VOIP ++ * external interrupt number is returned in. ++ * [IN] dspNum - Address of the DSP to query. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipExtIntr( unsigned char dspNum, unsigned long *pulValue ); ++ ++/************************************************************************** ++ * Name : BpGetHpnaExtIntr ++ * ++ * Description: This function returns the HPNA external interrupt number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the HPNA ++ * external interrupt number is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetHpnaExtIntr( unsigned long *pulValue ); ++ ++/************************************************************************** ++ * Name : BpGetHpnaChipSelect ++ * ++ * Description: This function returns the HPNA chip select number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the HPNA ++ * chip select number is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetHpnaChipSelect( unsigned long *pulValue ); ++ ++/************************************************************************** ++ * Name : BpGetVoipChipSelect ++ * ++ * Description: This function returns the VOIP chip select number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the VOIP ++ * chip select number is returned in. ++ * [IN] dspNum - Address of the DSP to query. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipChipSelect( unsigned char dspNum, unsigned long *pulValue ); ++ ++#endif /* __ASSEMBLER__ */ ++ ++#endif /* _BOARDPARMS_H */ ++ +diff -urN linux.old/arch/mips/bcm963xx/include/6338_intr.h linux.dev/arch/mips/bcm963xx/include/6338_intr.h +--- linux.old/arch/mips/bcm963xx/include/6338_intr.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm963xx/include/6338_intr.h 2006-08-25 00:39:38.000000000 +0200 +@@ -0,0 +1,64 @@ ++/* ++<:copyright-gpl ++ Copyright 2003 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++ ++#ifndef __6338_INTR_H ++#define __6338_INTR_H ++ ++/*=====================================================================*/ ++/* BCM6338 External Interrupt Level Assignments */ ++/*=====================================================================*/ ++#define INTERRUPT_ID_EXTERNAL_0 3 ++#define INTERRUPT_ID_EXTERNAL_1 4 ++#define INTERRUPT_ID_EXTERNAL_2 5 ++#define INTERRUPT_ID_EXTERNAL_3 6 ++ ++/*=====================================================================*/ ++/* BCM6338 Timer Interrupt Level Assignments */ ++/*=====================================================================*/ ++#define MIPS_TIMER_INT 7 ++ ++/*=====================================================================*/ ++/* Peripheral ISR Table Offset */ ++/*=====================================================================*/ ++#define INTERNAL_ISR_TABLE_OFFSET 8 ++ ++/*=====================================================================*/ ++/* Logical Peripheral Interrupt IDs */ ++/*=====================================================================*/ ++ ++#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0) ++#define INTERRUPT_ID_SPI (INTERNAL_ISR_TABLE_OFFSET + 1) ++#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2) ++#define INTERRUPT_ID_DG (INTERNAL_ISR_TABLE_OFFSET + 4) ++#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 5) ++#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 6) ++#define INTERRUPT_ID_USBS (INTERNAL_ISR_TABLE_OFFSET + 7) ++#define INTERRUPT_ID_EMAC1 (INTERNAL_ISR_TABLE_OFFSET + 8) ++#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 9) ++#define INTERRUPT_ID_SDRAM (INTERNAL_ISR_TABLE_OFFSET + 10) ++#define INTERRUPT_ID_USB_CNTL_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 11) ++#define INTERRUPT_ID_USB_CNTL_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 12) ++#define INTERRUPT_ID_USB_BULK_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 13) ++#define INTERRUPT_ID_USB_BULK_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 14) ++#define INTERRUPT_ID_EMAC1_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 15) ++#define INTERRUPT_ID_EMAC1_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 16) ++#define INTERRUPT_ID_SDIO (INTERNAL_ISR_TABLE_OFFSET + 17) ++ ++#endif /* __BCM6338_H */ ++ +diff -urN linux.old/arch/mips/bcm963xx/include/6338_map_part.h linux.dev/arch/mips/bcm963xx/include/6338_map_part.h +--- linux.old/arch/mips/bcm963xx/include/6338_map_part.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm963xx/include/6338_map_part.h 2006-08-25 00:39:38.000000000 +0200 +@@ -0,0 +1,334 @@ ++/* ++<:copyright-gpl ++ Copyright 2004 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++ ++#ifndef __BCM6338_MAP_H ++#define __BCM6338_MAP_H ++ ++#include "bcmtypes.h" ++ ++#define PERF_BASE 0xfffe0000 ++#define TIMR_BASE 0xfffe0200 ++#define UART_BASE 0xfffe0300 ++#define GPIO_BASE 0xfffe0400 ++#define SPI_BASE 0xfffe0c00 ++ ++typedef struct PerfControl { ++ uint32 RevID; ++ uint16 testControl; ++ uint16 blkEnables; ++#define EMAC_CLK_EN 0x0010 ++#define USBS_CLK_EN 0x0010 ++#define SAR_CLK_EN 0x0020 ++ ++#define SPI_CLK_EN 0x0200 ++ ++ uint32 pll_control; ++#define SOFT_RESET 0x00000001 ++ ++ uint32 IrqMask; ++ uint32 IrqStatus; ++ ++ uint32 ExtIrqCfg; ++#define EI_SENSE_SHFT 0 ++#define EI_STATUS_SHFT 5 ++#define EI_CLEAR_SHFT 10 ++#define EI_MASK_SHFT 15 ++#define EI_INSENS_SHFT 20 ++#define EI_LEVEL_SHFT 25 ++ ++ uint32 unused[4]; /* (18) */ ++ uint32 BlockSoftReset; /* (28) */ ++#define BSR_SPI 0x00000001 ++#define BSR_EMAC 0x00000004 ++#define BSR_USBH 0x00000008 ++#define BSR_USBS 0x00000010 ++#define BSR_ADSL 0x00000020 ++#define BSR_DMAMEM 0x00000040 ++#define BSR_SAR 0x00000080 ++#define BSR_ACLC 0x00000100 ++#define BSR_ADSL_MIPS_PLL 0x00000400 ++#define BSR_ALL_BLOCKS \ ++ (BSR_SPI | BSR_EMAC | BSR_USBH | BSR_USBS | BSR_ADSL | BSR_DMAMEM | \ ++ BSR_SAR | BSR_ACLC | BSR_ADSL_MIPS_PLL) ++} PerfControl; ++ ++#define PERF ((volatile PerfControl * const) PERF_BASE) ++ ++ ++typedef struct Timer { ++ uint16 unused0; ++ byte TimerMask; ++#define TIMER0EN 0x01 ++#define TIMER1EN 0x02 ++#define TIMER2EN 0x04 ++ byte TimerInts; ++#define TIMER0 0x01 ++#define TIMER1 0x02 ++#define TIMER2 0x04 ++#define WATCHDOG 0x08 ++ uint32 TimerCtl0; ++ uint32 TimerCtl1; ++ uint32 TimerCtl2; ++#define TIMERENABLE 0x80000000 ++#define RSTCNTCLR 0x40000000 ++ uint32 TimerCnt0; ++ uint32 TimerCnt1; ++ uint32 TimerCnt2; ++ uint32 WatchDogDefCount; ++ ++ /* Write 0xff00 0x00ff to Start timer ++ * Write 0xee00 0x00ee to Stop and re-load default count ++ * Read from this register returns current watch dog count ++ */ ++ uint32 WatchDogCtl; ++ ++ /* Number of 40-MHz ticks for WD Reset pulse to last */ ++ uint32 WDResetCount; ++} Timer; ++ ++#define TIMER ((volatile Timer * const) TIMR_BASE) ++typedef struct UartChannel { ++ byte unused0; ++ byte control; ++#define BRGEN 0x80 /* Control register bit defs */ ++#define TXEN 0x40 ++#define RXEN 0x20 ++#define LOOPBK 0x10 ++#define TXPARITYEN 0x08 ++#define TXPARITYEVEN 0x04 ++#define RXPARITYEN 0x02 ++#define RXPARITYEVEN 0x01 ++ ++ byte config; ++#define XMITBREAK 0x40 ++#define BITS5SYM 0x00 ++#define BITS6SYM 0x10 ++#define BITS7SYM 0x20 ++#define BITS8SYM 0x30 ++#define ONESTOP 0x07 ++#define TWOSTOP 0x0f ++ /* 4-LSBS represent STOP bits/char ++ * in 1/8 bit-time intervals. Zero ++ * represents 1/8 stop bit interval. ++ * Fifteen represents 2 stop bits. ++ */ ++ byte fifoctl; ++#define RSTTXFIFOS 0x80 ++#define RSTRXFIFOS 0x40 ++ /* 5-bit TimeoutCnt is in low bits of this register. ++ * This count represents the number of characters ++ * idle times before setting receive Irq when below threshold ++ */ ++ uint32 baudword; ++ /* When divide SysClk/2/(1+baudword) we should get 32*bit-rate ++ */ ++ ++ byte txf_levl; /* Read-only fifo depth */ ++ byte rxf_levl; /* Read-only fifo depth */ ++ byte fifocfg; /* Upper 4-bits are TxThresh, Lower are ++ * RxThreshold. Irq can be asserted ++ * when rx fifo> thresh, txfifo<thresh ++ */ ++ byte prog_out; /* Set value of DTR (Bit0), RTS (Bit1) ++ * if these bits are also enabled to GPIO_o ++ */ ++#define DTREN 0x01 ++#define RTSEN 0x02 ++ ++ byte unused1; ++ byte DeltaIPEdgeNoSense; /* Low 4-bits, set corr bit to 1 to ++ * detect irq on rising AND falling ++ * edges for corresponding GPIO_i ++ * if enabled (edge insensitive) ++ */ ++ byte DeltaIPConfig_Mask; /* Upper 4 bits: 1 for posedge sense ++ * 0 for negedge sense if ++ * not configured for edge ++ * insensitive (see above) ++ * Lower 4 bits: Mask to enable change ++ * detection IRQ for corresponding ++ * GPIO_i ++ */ ++ byte DeltaIP_SyncIP; /* Upper 4 bits show which bits ++ * have changed (may set IRQ). ++ * read automatically clears bit ++ * Lower 4 bits are actual status ++ */ ++ ++ uint16 intMask; /* Same Bit defs for Mask and status */ ++ uint16 intStatus; ++#define DELTAIP 0x0001 ++#define TXUNDERR 0x0002 ++#define TXOVFERR 0x0004 ++#define TXFIFOTHOLD 0x0008 ++#define TXREADLATCH 0x0010 ++#define TXFIFOEMT 0x0020 ++#define RXUNDERR 0x0040 ++#define RXOVFERR 0x0080 ++#define RXTIMEOUT 0x0100 ++#define RXFIFOFULL 0x0200 ++#define RXFIFOTHOLD 0x0400 ++#define RXFIFONE 0x0800 ++#define RXFRAMERR 0x1000 ++#define RXPARERR 0x2000 ++#define RXBRK 0x4000 ++ ++ uint16 unused2; ++ uint16 Data; /* Write to TX, Read from RX */ ++ /* bits 11:8 are BRK,PAR,FRM errors */ ++ ++ uint32 unused3; ++ uint32 unused4; ++} Uart; ++ ++#define UART ((volatile Uart * const) UART_BASE) ++ ++typedef struct GpioControl { ++ uint32 unused0; ++ uint32 GPIODir; /* bits 7:0 */ ++ uint32 unused1; ++ uint32 GPIOio; /* bits 7:0 */ ++ uint32 LEDCtrl; ++#define LED3_STROBE 0x08000000 ++#define LED2_STROBE 0x04000000 ++#define LED1_STROBE 0x02000000 ++#define LED0_STROBE 0x01000000 ++#define LED_TEST 0x00010000 ++#define LED3_DISABLE_LINK_ACT 0x00008000 ++#define LED2_DISABLE_LINK_ACT 0x00004000 ++#define LED1_DISABLE_LINK_ACT 0x00002000 ++#define LED0_DISABLE_LINK_ACT 0x00001000 ++#define LED_INTERVAL_SET_MASK 0x00000f00 ++#define LED_INTERVAL_SET_320MS 0x00000500 ++#define LED_INTERVAL_SET_160MS 0x00000400 ++#define LED_INTERVAL_SET_80MS 0x00000300 ++#define LED_INTERVAL_SET_40MS 0x00000200 ++#define LED_INTERVAL_SET_20MS 0x00000100 ++#define LED3_ON 0x00000080 ++#define LED2_ON 0x00000040 ++#define LED1_ON 0x00000020 ++#define LED0_ON 0x00000010 ++#define LED3_ENABLE 0x00000008 ++#define LED2_ENABLE 0x00000004 ++#define LED1_ENABLE 0x00000002 ++#define LED0_ENABLE 0x00000001 ++ uint32 SpiSlaveCfg; ++#define SPI_SLAVE_RESET 0x00010000 ++#define SPI_RESTRICT 0x00000400 ++#define SPI_DELAY_DISABLE 0x00000200 ++#define SPI_PROBE_MUX_SEL_MASK 0x000001e0 ++#define SPI_SER_ADDR_CFG_MASK 0x0000000c ++#define SPI_MODE 0x00000001 ++ uint32 vRegConfig; ++} GpioControl; ++ ++#define GPIO ((volatile GpioControl * const) GPIO_BASE) ++ ++/* Number to mask conversion macro used for GPIODir and GPIOio */ ++#define GPIO_NUM_MAX_BITS_MASK 0x0f ++#define GPIO_NUM_TO_MASK(X) (1 << ((X) & GPIO_NUM_MAX_BITS_MASK)) ++ ++/* ++** Spi Controller ++*/ ++ ++typedef struct SpiControl { ++ uint16 spiCmd; /* (0x0): SPI command */ ++#define SPI_CMD_START_IMMEDIATE 3 ++ ++#define SPI_CMD_COMMAND_SHIFT 0 ++#define SPI_CMD_DEVICE_ID_SHIFT 4 ++#define SPI_CMD_PREPEND_BYTE_CNT_SHIFT 8 ++ ++ byte spiIntStatus; /* (0x2): SPI interrupt status */ ++ byte spiMaskIntStatus; /* (0x3): SPI masked interrupt status */ ++ ++ byte spiIntMask; /* (0x4): SPI interrupt mask */ ++#define SPI_INTR_CMD_DONE 0x01 ++#define SPI_INTR_CLEAR_ALL 0x1f ++ ++ byte spiStatus; /* (0x5): SPI status */ ++ ++ byte spiClkCfg; /* (0x6): SPI clock configuration */ ++ ++ byte spiFillByte; /* (0x7): SPI fill byte */ ++ ++ byte unused0; ++ byte spiMsgTail; /* (0x9): msgtail */ ++ byte unused1; ++ byte spiRxTail; /* (0xB): rxtail */ ++ ++ uint32 unused2[13]; /* (0x0c - 0x3c) reserved */ ++ ++ byte spiMsgCtl; /* (0x40) control byte */ ++#define HALF_DUPLEX_W 1 ++#define HALF_DUPLEX_R 2 ++#define SPI_MSG_TYPE_SHIFT 6 ++#define SPI_BYTE_CNT_SHIFT 0 ++ byte spiMsgData[63]; /* (0x41 - 0x7f) msg data */ ++ byte spiRxDataFifo[64]; /* (0x80 - 0xbf) rx data */ ++ byte unused3[64]; /* (0xc0 - 0xff) reserved */ ++} SpiControl; ++ ++#define SPI ((volatile SpiControl * const) SPI_BASE) ++ ++/* ++** External Bus Interface ++*/ ++typedef struct EbiChipSelect { ++ uint32 base; /* base address in upper 24 bits */ ++#define EBI_SIZE_8K 0 ++#define EBI_SIZE_16K 1 ++#define EBI_SIZE_32K 2 ++#define EBI_SIZE_64K 3 ++#define EBI_SIZE_128K 4 ++#define EBI_SIZE_256K 5 ++#define EBI_SIZE_512K 6 ++#define EBI_SIZE_1M 7 ++#define EBI_SIZE_2M 8 ++#define EBI_SIZE_4M 9 ++#define EBI_SIZE_8M 10 ++#define EBI_SIZE_16M 11 ++#define EBI_SIZE_32M 12 ++#define EBI_SIZE_64M 13 ++#define EBI_SIZE_128M 14 ++#define EBI_SIZE_256M 15 ++ uint32 config; ++#define EBI_ENABLE 0x00000001 /* .. enable this range */ ++#define EBI_WAIT_STATES 0x0000000e /* .. mask for wait states */ ++#define EBI_WTST_SHIFT 1 /* .. for shifting wait states */ ++#define EBI_WORD_WIDE 0x00000010 /* .. 16-bit peripheral, else 8 */ ++#define EBI_WREN 0x00000020 /* enable posted writes */ ++#define EBI_POLARITY 0x00000040 /* .. set to invert something, ++ ** don't know what yet */ ++#define EBI_TS_TA_MODE 0x00000080 /* .. use TS/TA mode */ ++#define EBI_TS_SEL 0x00000100 /* .. drive tsize, not bs_b */ ++#define EBI_FIFO 0x00000200 /* .. use fifo */ ++#define EBI_RE 0x00000400 /* .. Reverse Endian */ ++} EbiChipSelect; ++ ++typedef struct MpiRegisters { ++ EbiChipSelect cs[1]; /* size chip select configuration */ ++} MpiRegisters; ++ ++#define MPI ((volatile MpiRegisters * const) MPI_BASE) ++ ++ ++#endif ++ +diff -urN linux.old/arch/mips/bcm963xx/include/6345_intr.h linux.dev/arch/mips/bcm963xx/include/6345_intr.h +--- linux.old/arch/mips/bcm963xx/include/6345_intr.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm963xx/include/6345_intr.h 2006-08-25 00:39:38.000000000 +0200 +@@ -0,0 +1,72 @@ ++/* ++<:copyright-gpl ++ Copyright 2002 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++ ++#ifndef __6345_INTR_H ++#define __6345_INTR_H ++ ++ ++/*=====================================================================*/ ++/* BCM6345 External Interrupt Level Assignments */ ++/*=====================================================================*/ ++#define INTERRUPT_ID_EXTERNAL_0 3 ++#define INTERRUPT_ID_EXTERNAL_1 4 ++#define INTERRUPT_ID_EXTERNAL_2 5 ++#define INTERRUPT_ID_EXTERNAL_3 6 ++ ++/*=====================================================================*/ ++/* BCM6345 Timer Interrupt Level Assignments */ ++/*=====================================================================*/ ++#define MIPS_TIMER_INT 7 ++ ++/*=====================================================================*/ ++/* Peripheral ISR Table Offset */ ++/*=====================================================================*/ ++#define INTERNAL_ISR_TABLE_OFFSET 8 ++#define DMA_ISR_TABLE_OFFSET (INTERNAL_ISR_TABLE_OFFSET + 13) ++ ++/*=====================================================================*/ ++/* Logical Peripheral Interrupt IDs */ ++/*=====================================================================*/ ++ ++/* Internal peripheral interrupt IDs */ ++#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0) ++#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2) ++#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 3) ++#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 4) ++#define INTERRUPT_ID_USB (INTERNAL_ISR_TABLE_OFFSET + 5) ++#define INTERRUPT_ID_EMAC (INTERNAL_ISR_TABLE_OFFSET + 8) ++#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 12) ++ ++/* DMA channel interrupt IDs */ ++#define INTERRUPT_ID_EMAC_RX_CHAN (DMA_ISR_TABLE_OFFSET + EMAC_RX_CHAN) ++#define INTERRUPT_ID_EMAC_TX_CHAN (DMA_ISR_TABLE_OFFSET + EMAC_TX_CHAN) ++#define INTERRUPT_ID_EBI_RX_CHAN (DMA_ISR_TABLE_OFFSET + EBI_RX_CHAN) ++#define INTERRUPT_ID_EBI_TX_CHAN (DMA_ISR_TABLE_OFFSET + EBI_TX_CHAN) ++#define INTERRUPT_ID_RESERVED_RX_CHAN (DMA_ISR_TABLE_OFFSET + RESERVED_RX_CHAN) ++#define INTERRUPT_ID_RESERVED_TX_CHAN (DMA_ISR_TABLE_OFFSET + RESERVED_TX_CHAN) ++#define INTERRUPT_ID_USB_BULK_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_BULK_RX_CHAN) ++#define INTERRUPT_ID_USB_BULK_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_BULK_TX_CHAN) ++#define INTERRUPT_ID_USB_CNTL_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_CNTL_RX_CHAN) ++#define INTERRUPT_ID_USB_CNTL_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_CNTL_TX_CHAN) ++#define INTERRUPT_ID_USB_ISO_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_ISO_RX_CHAN) ++#define INTERRUPT_ID_USB_ISO_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_ISO_TX_CHAN) ++ ++ ++#endif /* __BCM6345_H */ ++ +diff -urN linux.old/arch/mips/bcm963xx/include/6345_map_part.h linux.dev/arch/mips/bcm963xx/include/6345_map_part.h +--- linux.old/arch/mips/bcm963xx/include/6345_map_part.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm963xx/include/6345_map_part.h 2006-08-25 00:39:38.000000000 +0200 +@@ -0,0 +1,163 @@ ++/* ++<:copyright-gpl ++ Copyright 2002 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++ ++#ifndef __BCM6345_MAP_H ++#define __BCM6345_MAP_H ++ ++ ++#include "bcmtypes.h" ++#include "6345_intr.h" ++ ++typedef struct IntControl { ++ uint32 RevID; ++ uint16 testControl; ++ uint16 blkEnables; ++#define USB_CLK_EN 0x0100 ++#define EMAC_CLK_EN 0x0080 ++#define UART_CLK_EN 0x0008 ++#define CPU_CLK_EN 0x0001 ++ ++ uint32 pll_control; ++#define SOFT_RESET 0x00000001 ++ ++ uint32 IrqMask; ++ uint32 IrqStatus; ++ ++ uint32 ExtIrqCfg; ++#define EI_SENSE_SHFT 0 ++#define EI_STATUS_SHFT 4 ++#define EI_CLEAR_SHFT 8 ++#define EI_MASK_SHFT 12 ++#define EI_INSENS_SHFT 16 ++#define EI_LEVEL_SHFT 20 ++} IntControl; ++ ++#define INTC_BASE 0xfffe0000 ++#define PERF ((volatile IntControl * const) INTC_BASE) ++ ++#define TIMR_BASE 0xfffe0200 ++typedef struct Timer { ++ uint16 unused0; ++ byte TimerMask; ++#define TIMER0EN 0x01 ++#define TIMER1EN 0x02 ++#define TIMER2EN 0x04 ++ byte TimerInts; ++#define TIMER0 0x01 ++#define TIMER1 0x02 ++#define TIMER2 0x04 ++#define WATCHDOG 0x08 ++ uint32 TimerCtl0; ++ uint32 TimerCtl1; ++ uint32 TimerCtl2; ++#define TIMERENABLE 0x80000000 ++#define RSTCNTCLR 0x40000000 ++ uint32 TimerCnt0; ++ uint32 TimerCnt1; ++ uint32 TimerCnt2; ++ uint32 WatchDogDefCount; ++ ++ /* Write 0xff00 0x00ff to Start timer ++ * Write 0xee00 0x00ee to Stop and re-load default count ++ * Read from this register returns current watch dog count ++ */ ++ uint32 WatchDogCtl; ++ ++ /* Number of 40-MHz ticks for WD Reset pulse to last */ ++ uint32 WDResetCount; ++} Timer; ++ ++#define TIMER ((volatile Timer * const) TIMR_BASE) ++ ++typedef struct UartChannel { ++ byte unused0; ++ byte control; ++#define BRGEN 0x80 /* Control register bit defs */ ++#define TXEN 0x40 ++#define RXEN 0x20 ++#define TXPARITYEN 0x08 ++#define TXPARITYEVEN 0x04 ++#define RXPARITYEN 0x02 ++#define RXPARITYEVEN 0x01 ++ byte config; ++#define BITS5SYM 0x00 ++#define BITS6SYM 0x10 ++#define BITS7SYM 0x20 ++#define BITS8SYM 0x30 ++#define XMITBREAK 0x40 ++#define ONESTOP 0x07 ++#define TWOSTOP 0x0f ++ ++ byte fifoctl; ++#define RSTTXFIFOS 0x80 ++#define RSTRXFIFOS 0x40 ++ uint32 baudword; ++ ++ byte txf_levl; ++ byte rxf_levl; ++ byte fifocfg; ++ byte prog_out; ++ ++ byte unused1; ++ byte DeltaIPEdgeNoSense; ++ byte DeltaIPConfig_Mask; ++ byte DeltaIP_SyncIP; ++ uint16 intMask; ++ uint16 intStatus; ++#define TXUNDERR 0x0002 ++#define TXOVFERR 0x0004 ++#define TXFIFOEMT 0x0020 ++#define RXOVFERR 0x0080 ++#define RXFIFONE 0x0800 ++#define RXFRAMERR 0x1000 ++#define RXPARERR 0x2000 ++#define RXBRK 0x4000 ++ ++ uint16 unused2; ++ uint16 Data; ++ uint32 unused3; ++ uint32 unused4; ++} Uart; ++ ++#define UART_BASE 0xfffe0300 ++#define UART ((volatile Uart * const) UART_BASE) ++ ++typedef struct GpioControl { ++ uint16 unused0; ++ byte unused1; ++ byte TBusSel; ++ ++ uint16 unused2; ++ uint16 GPIODir; ++ byte unused3; ++ byte Leds; ++ uint16 GPIOio; ++ ++ uint32 UartCtl; ++} GpioControl; ++ ++#define GPIO_BASE 0xfffe0400 ++#define GPIO ((volatile GpioControl * const) GPIO_BASE) ++ ++#define GPIO_NUM_MAX_BITS_MASK 0x0f ++#define GPIO_NUM_TO_MASK(X) (1 << ((X) & GPIO_NUM_MAX_BITS_MASK)) ++ ++ ++#endif ++ +diff -urN linux.old/arch/mips/bcm963xx/include/6348_intr.h linux.dev/arch/mips/bcm963xx/include/6348_intr.h +--- linux.old/arch/mips/bcm963xx/include/6348_intr.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm963xx/include/6348_intr.h 2006-08-25 00:39:38.000000000 +0200 +@@ -0,0 +1,74 @@ ++/* ++<:copyright-gpl ++ Copyright 2003 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++ ++#ifndef __6348_INTR_H ++#define __6348_INTR_H ++ ++ ++/*=====================================================================*/ ++/* BCM6348 External Interrupt Level Assignments */ ++/*=====================================================================*/ ++#define INTERRUPT_ID_EXTERNAL_0 3 ++#define INTERRUPT_ID_EXTERNAL_1 4 ++#define INTERRUPT_ID_EXTERNAL_2 5 ++#define INTERRUPT_ID_EXTERNAL_3 6 ++ ++/*=====================================================================*/ ++/* BCM6348 Timer Interrupt Level Assignments */ ++/*=====================================================================*/ ++#define MIPS_TIMER_INT 7 ++ ++/*=====================================================================*/ ++/* Peripheral ISR Table Offset */ ++/*=====================================================================*/ ++#define INTERNAL_ISR_TABLE_OFFSET 8 ++ ++/*=====================================================================*/ ++/* Logical Peripheral Interrupt IDs */ ++/*=====================================================================*/ ++ ++#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0) ++#define INTERRUPT_ID_SPI (INTERNAL_ISR_TABLE_OFFSET + 1) ++#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2) ++#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 4) ++#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 5) ++#define INTERRUPT_ID_USBS (INTERNAL_ISR_TABLE_OFFSET + 6) ++#define INTERRUPT_ID_EMAC2 (INTERNAL_ISR_TABLE_OFFSET + 7) ++#define INTERRUPT_ID_EMAC1 (INTERNAL_ISR_TABLE_OFFSET + 8) ++#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 9) ++#define INTERRUPT_ID_M2M (INTERNAL_ISR_TABLE_OFFSET + 10) ++#define INTERRUPT_ID_ACLC (INTERNAL_ISR_TABLE_OFFSET + 11) ++#define INTERRUPT_ID_USBH (INTERNAL_ISR_TABLE_OFFSET + 12) ++#define INTERRUPT_ID_SDRAM (INTERNAL_ISR_TABLE_OFFSET + 13) ++#define INTERRUPT_ID_USB_CNTL_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 14) ++#define INTERRUPT_ID_USB_CNTL_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 15) ++#define INTERRUPT_ID_USB_BULK_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 16) ++#define INTERRUPT_ID_USB_BULK_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 17) ++#define INTERRUPT_ID_USB_ISO_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 18) ++#define INTERRUPT_ID_USB_ISO_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 19) ++#define INTERRUPT_ID_EMAC1_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 20) ++#define INTERRUPT_ID_EMAC1_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 21) ++#define INTERRUPT_ID_EMAC2_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 22) ++#define INTERRUPT_ID_EMAC2_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 23) ++#define INTERRUPT_ID_MPI (INTERNAL_ISR_TABLE_OFFSET + 24) ++#define INTERRUPT_ID_DG (INTERNAL_ISR_TABLE_OFFSET + 25) ++ ++ ++#endif /* __BCM6348_H */ ++ +diff -urN linux.old/arch/mips/bcm963xx/include/6348_map_part.h linux.dev/arch/mips/bcm963xx/include/6348_map_part.h +--- linux.old/arch/mips/bcm963xx/include/6348_map_part.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm963xx/include/6348_map_part.h 2006-08-25 00:39:38.000000000 +0200 +@@ -0,0 +1,500 @@ ++/* ++<:copyright-gpl ++ Copyright 2002 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++ ++#ifndef __BCM6348_MAP_H ++#define __BCM6348_MAP_H ++ ++#include "bcmtypes.h" ++ ++#define PERF_BASE 0xfffe0000 ++#define TIMR_BASE 0xfffe0200 ++#define UART_BASE 0xfffe0300 ++#define GPIO_BASE 0xfffe0400 ++#define MPI_BASE 0xfffe2000 /* MPI control registers */ ++#define USB_HOST_BASE 0xfffe1b00 /* USB host registers */ ++#define USB_HOST_NON_OHCI 0xfffe1c00 /* USB host non-OHCI registers */ ++ ++typedef struct PerfControl { ++ uint32 RevID; ++ uint16 testControl; ++ uint16 blkEnables; ++#define EMAC_CLK_EN 0x0010 ++#define SAR_CLK_EN 0x0020 ++#define USBS_CLK_EN 0x0040 ++#define USBH_CLK_EN 0x0100 ++ ++ uint32 pll_control; ++#define SOFT_RESET 0x00000001 ++ ++ uint32 IrqMask; ++ uint32 IrqStatus; ++ ++ uint32 ExtIrqCfg; ++#define EI_SENSE_SHFT 0 ++#define EI_STATUS_SHFT 5 ++#define EI_CLEAR_SHFT 10 ++#define EI_MASK_SHFT 15 ++#define EI_INSENS_SHFT 20 ++#define EI_LEVEL_SHFT 25 ++ ++ uint32 unused[4]; /* (18) */ ++ uint32 BlockSoftReset; /* (28) */ ++#define BSR_SPI 0x00000001 ++#define BSR_EMAC 0x00000004 ++#define BSR_USBH 0x00000008 ++#define BSR_USBS 0x00000010 ++#define BSR_ADSL 0x00000020 ++#define BSR_DMAMEM 0x00000040 ++#define BSR_SAR 0x00000080 ++#define BSR_ACLC 0x00000100 ++#define BSR_ADSL_MIPS_PLL 0x00000400 ++#define BSR_ALL_BLOCKS \ ++ (BSR_SPI | BSR_EMAC | BSR_USBH | BSR_USBS | BSR_ADSL | BSR_DMAMEM | \ ++ BSR_SAR | BSR_ACLC | BSR_ADSL_MIPS_PLL) ++ uint32 unused2[2]; /* (2c) */ ++ uint32 PllStrap; /* (34) */ ++#define PLL_N1_SHFT 20 ++#define PLL_N1_MASK (7<<PLL_N1_SHFT) ++#define PLL_N2_SHFT 15 ++#define PLL_N2_MASK (0x1f<<PLL_N2_SHFT) ++#define PLL_M1_REF_SHFT 12 ++#define PLL_M1_REF_MASK (7<<PLL_M1_REF_SHFT) ++#define PLL_M2_REF_SHFT 9 ++#define PLL_M2_REF_MASK (7<<PLL_M2_REF_SHFT) ++#define PLL_M1_CPU_SHFT 6 ++#define PLL_M1_CPU_MASK (7<<PLL_M1_CPU_SHFT) ++#define PLL_M1_BUS_SHFT 3 ++#define PLL_M1_BUS_MASK (7<<PLL_M1_BUS_SHFT) ++#define PLL_M2_BUS_SHFT 0 ++#define PLL_M2_BUS_MASK (7<<PLL_M2_BUS_SHFT) ++} PerfControl; ++ ++#define PERF ((volatile PerfControl * const) PERF_BASE) ++ ++typedef struct Timer { ++ uint16 unused0; ++ byte TimerMask; ++#define TIMER0EN 0x01 ++#define TIMER1EN 0x02 ++#define TIMER2EN 0x04 ++ byte TimerInts; ++#define TIMER0 0x01 ++#define TIMER1 0x02 ++#define TIMER2 0x04 ++#define WATCHDOG 0x08 ++ uint32 TimerCtl0; ++ uint32 TimerCtl1; ++ uint32 TimerCtl2; ++#define TIMERENABLE 0x80000000 ++#define RSTCNTCLR 0x40000000 ++ uint32 TimerCnt0; ++ uint32 TimerCnt1; ++ uint32 TimerCnt2; ++ uint32 WatchDogDefCount; ++ ++ /* Write 0xff00 0x00ff to Start timer ++ * Write 0xee00 0x00ee to Stop and re-load default count ++ * Read from this register returns current watch dog count ++ */ ++ uint32 WatchDogCtl; ++ ++ /* Number of 40-MHz ticks for WD Reset pulse to last */ ++ uint32 WDResetCount; ++} Timer; ++ ++#define TIMER ((volatile Timer * const) TIMR_BASE) ++ ++typedef struct UartChannel { ++ byte unused0; ++ byte control; ++#define BRGEN 0x80 /* Control register bit defs */ ++#define TXEN 0x40 ++#define RXEN 0x20 ++#define LOOPBK 0x10 ++#define TXPARITYEN 0x08 ++#define TXPARITYEVEN 0x04 ++#define RXPARITYEN 0x02 ++#define RXPARITYEVEN 0x01 ++ ++ byte config; ++#define XMITBREAK 0x40 ++#define BITS5SYM 0x00 ++#define BITS6SYM 0x10 ++#define BITS7SYM 0x20 ++#define BITS8SYM 0x30 ++#define ONESTOP 0x07 ++#define TWOSTOP 0x0f ++ /* 4-LSBS represent STOP bits/char ++ * in 1/8 bit-time intervals. Zero ++ * represents 1/8 stop bit interval. ++ * Fifteen represents 2 stop bits. ++ */ ++ byte fifoctl; ++#define RSTTXFIFOS 0x80 ++#define RSTRXFIFOS 0x40 ++ /* 5-bit TimeoutCnt is in low bits of this register. ++ * This count represents the number of characters ++ * idle times before setting receive Irq when below threshold ++ */ ++ uint32 baudword; ++ /* When divide SysClk/2/(1+baudword) we should get 32*bit-rate ++ */ ++ ++ byte txf_levl; /* Read-only fifo depth */ ++ byte rxf_levl; /* Read-only fifo depth */ ++ byte fifocfg; /* Upper 4-bits are TxThresh, Lower are ++ * RxThreshold. Irq can be asserted ++ * when rx fifo> thresh, txfifo<thresh ++ */ ++ byte prog_out; /* Set value of DTR (Bit0), RTS (Bit1) ++ * if these bits are also enabled to GPIO_o ++ */ ++#define DTREN 0x01 ++#define RTSEN 0x02 ++ ++ byte unused1; ++ byte DeltaIPEdgeNoSense; /* Low 4-bits, set corr bit to 1 to ++ * detect irq on rising AND falling ++ * edges for corresponding GPIO_i ++ * if enabled (edge insensitive) ++ */ ++ byte DeltaIPConfig_Mask; /* Upper 4 bits: 1 for posedge sense ++ * 0 for negedge sense if ++ * not configured for edge ++ * insensitive (see above) ++ * Lower 4 bits: Mask to enable change ++ * detection IRQ for corresponding ++ * GPIO_i ++ */ ++ byte DeltaIP_SyncIP; /* Upper 4 bits show which bits ++ * have changed (may set IRQ). ++ * read automatically clears bit ++ * Lower 4 bits are actual status ++ */ ++ ++ uint16 intMask; /* Same Bit defs for Mask and status */ ++ uint16 intStatus; ++#define DELTAIP 0x0001 ++#define TXUNDERR 0x0002 ++#define TXOVFERR 0x0004 ++#define TXFIFOTHOLD 0x0008 ++#define TXREADLATCH 0x0010 ++#define TXFIFOEMT 0x0020 ++#define RXUNDERR 0x0040 ++#define RXOVFERR 0x0080 ++#define RXTIMEOUT 0x0100 ++#define RXFIFOFULL 0x0200 ++#define RXFIFOTHOLD 0x0400 ++#define RXFIFONE 0x0800 ++#define RXFRAMERR 0x1000 ++#define RXPARERR 0x2000 ++#define RXBRK 0x4000 ++ ++ uint16 unused2; ++ uint16 Data; /* Write to TX, Read from RX */ ++ /* bits 11:8 are BRK,PAR,FRM errors */ ++ ++ uint32 unused3; ++ uint32 unused4; ++} Uart; ++ ++#define UART ((volatile Uart * const) UART_BASE) ++ ++typedef struct GpioControl { ++ uint32 GPIODir_high; /* bits 36:32 */ ++ uint32 GPIODir; /* bits 31:00 */ ++ uint32 GPIOio_high; /* bits 36:32 */ ++ uint32 GPIOio; /* bits 31:00 */ ++ uint32 LEDCtrl; ++#define LED3_STROBE 0x08000000 ++#define LED2_STROBE 0x04000000 ++#define LED1_STROBE 0x02000000 ++#define LED0_STROBE 0x01000000 ++#define LED_TEST 0x00010000 ++#define LED3_DISABLE_LINK_ACT 0x00008000 ++#define LED2_DISABLE_LINK_ACT 0x00004000 ++#define LED1_DISABLE_LINK_ACT 0x00002000 ++#define LED0_DISABLE_LINK_ACT 0x00001000 ++#define LED_INTERVAL_SET_MASK 0x00000f00 ++#define LED_INTERVAL_SET_320MS 0x00000500 ++#define LED_INTERVAL_SET_160MS 0x00000400 ++#define LED_INTERVAL_SET_80MS 0x00000300 ++#define LED_INTERVAL_SET_40MS 0x00000200 ++#define LED_INTERVAL_SET_20MS 0x00000100 ++#define LED3_ON 0x00000080 ++#define LED2_ON 0x00000040 ++#define LED1_ON 0x00000020 ++#define LED0_ON 0x00000010 ++#define LED3_ENABLE 0x00000008 ++#define LED2_ENABLE 0x00000004 ++#define LED1_ENABLE 0x00000002 ++#define LED0_ENABLE 0x00000001 ++ uint32 SpiSlaveCfg; ++#define SPI_SLAVE_RESET 0x00010000 ++#define SPI_RESTRICT 0x00000400 ++#define SPI_DELAY_DISABLE 0x00000200 ++#define SPI_PROBE_MUX_SEL_MASK 0x000001e0 ++#define SPI_SER_ADDR_CFG_MASK 0x0000000c ++#define SPI_MODE 0x00000001 ++ uint32 GPIOMode; ++#define GROUP4_DIAG 0x00090000 ++#define GROUP4_UTOPIA 0x00080000 ++#define GROUP4_LEGACY_LED 0x00030000 ++#define GROUP4_MII_SNOOP 0x00020000 ++#define GROUP4_EXT_EPHY 0x00010000 ++#define GROUP3_DIAG 0x00009000 ++#define GROUP3_UTOPIA 0x00008000 ++#define GROUP3_EXT_MII 0x00007000 ++#define GROUP2_DIAG 0x00000900 ++#define GROUP2_PCI 0x00000500 ++#define GROUP1_DIAG 0x00000090 ++#define GROUP1_UTOPIA 0x00000080 ++#define GROUP1_SPI_UART 0x00000060 ++#define GROUP1_SPI_MASTER 0x00000060 ++#define GROUP1_MII_PCCARD 0x00000040 ++#define GROUP1_MII_SNOOP 0x00000020 ++#define GROUP1_EXT_EPHY 0x00000010 ++#define GROUP0_DIAG 0x00000009 ++#define GROUP0_EXT_MII 0x00000007 ++ ++} GpioControl; ++ ++#define GPIO ((volatile GpioControl * const) GPIO_BASE) ++ ++/* Number to mask conversion macro used for GPIODir and GPIOio */ ++#define GPIO_NUM_TOTAL_BITS_MASK 0x3f ++#define GPIO_NUM_MAX_BITS_MASK 0x1f ++#define GPIO_NUM_TO_MASK(X) ( (((X) & GPIO_NUM_TOTAL_BITS_MASK) < 32) ? (1 << ((X) & GPIO_NUM_MAX_BITS_MASK)) : (0) ) ++ ++/* Number to mask conversion macro used for GPIODir_high and GPIOio_high */ ++#define GPIO_NUM_MAX_BITS_MASK_HIGH 0x07 ++#define GPIO_NUM_TO_MASK_HIGH(X) ( (((X) & GPIO_NUM_TOTAL_BITS_MASK) >= 32) ? (1 << ((X-32) & GPIO_NUM_MAX_BITS_MASK_HIGH)) : (0) ) ++ ++ ++/* ++** External Bus Interface ++*/ ++typedef struct EbiChipSelect { ++ uint32 base; /* base address in upper 24 bits */ ++#define EBI_SIZE_8K 0 ++#define EBI_SIZE_16K 1 ++#define EBI_SIZE_32K 2 ++#define EBI_SIZE_64K 3 ++#define EBI_SIZE_128K 4 ++#define EBI_SIZE_256K 5 ++#define EBI_SIZE_512K 6 ++#define EBI_SIZE_1M 7 ++#define EBI_SIZE_2M 8 ++#define EBI_SIZE_4M 9 ++#define EBI_SIZE_8M 10 ++#define EBI_SIZE_16M 11 ++#define EBI_SIZE_32M 12 ++#define EBI_SIZE_64M 13 ++#define EBI_SIZE_128M 14 ++#define EBI_SIZE_256M 15 ++ uint32 config; ++#define EBI_ENABLE 0x00000001 /* .. enable this range */ ++#define EBI_WAIT_STATES 0x0000000e /* .. mask for wait states */ ++#define EBI_WTST_SHIFT 1 /* .. for shifting wait states */ ++#define EBI_WORD_WIDE 0x00000010 /* .. 16-bit peripheral, else 8 */ ++#define EBI_WREN 0x00000020 /* enable posted writes */ ++#define EBI_POLARITY 0x00000040 /* .. set to invert something, ++ ** don't know what yet */ ++#define EBI_TS_TA_MODE 0x00000080 /* .. use TS/TA mode */ ++#define EBI_TS_SEL 0x00000100 /* .. drive tsize, not bs_b */ ++#define EBI_FIFO 0x00000200 /* .. use fifo */ ++#define EBI_RE 0x00000400 /* .. Reverse Endian */ ++} EbiChipSelect; ++ ++typedef struct MpiRegisters { ++ EbiChipSelect cs[7]; /* size chip select configuration */ ++#define EBI_CS0_BASE 0 ++#define EBI_CS1_BASE 1 ++#define EBI_CS2_BASE 2 ++#define EBI_CS3_BASE 3 ++#define PCMCIA_COMMON_BASE 4 ++#define PCMCIA_ATTRIBUTE_BASE 5 ++#define PCMCIA_IO_BASE 6 ++ uint32 unused0[2]; /* reserved */ ++ uint32 ebi_control; /* ebi control */ ++ uint32 unused1[4]; /* reserved */ ++#define EBI_ACCESS_TIMEOUT 0x000007FF ++ uint32 pcmcia_cntl1; /* pcmcia control 1 */ ++#define PCCARD_CARD_RESET 0x00040000 ++#define CARDBUS_ENABLE 0x00008000 ++#define PCMCIA_ENABLE 0x00004000 ++#define PCMCIA_GPIO_ENABLE 0x00002000 ++#define CARDBUS_IDSEL 0x00001F00 ++#define VS2_OEN 0x00000080 ++#define VS1_OEN 0x00000040 ++#define VS2_OUT 0x00000020 ++#define VS1_OUT 0x00000010 ++#define VS2_IN 0x00000008 ++#define VS1_IN 0x00000004 ++#define CD2_IN 0x00000002 ++#define CD1_IN 0x00000001 ++#define VS_MASK 0x0000000C ++#define CD_MASK 0x00000003 ++ uint32 unused2; /* reserved */ ++ uint32 pcmcia_cntl2; /* pcmcia control 2 */ ++#define PCMCIA_BYTESWAP_DIS 0x00000002 ++#define PCMCIA_HALFWORD_EN 0x00000001 ++#define RW_ACTIVE_CNT_BIT 2 ++#define INACTIVE_CNT_BIT 8 ++#define CE_SETUP_CNT_BIT 16 ++#define CE_HOLD_CNT_BIT 24 ++ uint32 unused3[40]; /* reserved */ ++ ++ uint32 sp0range; /* PCI to internal system bus address space */ ++ uint32 sp0remap; ++ uint32 sp0cfg; ++ uint32 sp1range; ++ uint32 sp1remap; ++ uint32 sp1cfg; ++ ++ uint32 EndianCfg; ++ ++ uint32 l2pcfgctl; /* internal system bus to PCI IO/Cfg control */ ++#define DIR_CFG_SEL 0x80000000 /* change from PCI I/O access to PCI config access */ ++#define DIR_CFG_USEREG 0x40000000 /* use this register info for PCI configuration access */ ++#define DEVICE_NUMBER 0x00007C00 /* device number for the PCI configuration access */ ++#define FUNC_NUMBER 0x00000300 /* function number for the PCI configuration access */ ++#define REG_NUMBER 0x000000FC /* register number for the PCI configuration access */ ++#define CONFIG_TYPE 0x00000003 /* configuration type for the PCI configuration access */ ++ ++ uint32 l2pmrange1; /* internal system bus to PCI memory space */ ++#define PCI_SIZE_64K 0xFFFF0000 ++#define PCI_SIZE_128K 0xFFFE0000 ++#define PCI_SIZE_256K 0xFFFC0000 ++#define PCI_SIZE_512K 0xFFF80000 ++#define PCI_SIZE_1M 0xFFF00000 ++#define PCI_SIZE_2M 0xFFE00000 ++#define PCI_SIZE_4M 0xFFC00000 ++#define PCI_SIZE_8M 0xFF800000 ++#define PCI_SIZE_16M 0xFF000000 ++#define PCI_SIZE_32M 0xFE000000 ++ uint32 l2pmbase1; /* kseg0 or kseg1 address & 0x1FFFFFFF */ ++ uint32 l2pmremap1; ++#define CARDBUS_MEM 0x00000004 ++#define MEM_WINDOW_EN 0x00000001 ++ uint32 l2pmrange2; ++ uint32 l2pmbase2; ++ uint32 l2pmremap2; ++ uint32 l2piorange; /* internal system bus to PCI I/O space */ ++ uint32 l2piobase; ++ uint32 l2pioremap; ++ ++ uint32 pcimodesel; ++#define PCI2_INT_BUS_RD_PREFECH 0x000000F0 ++#define PCI_BAR2_NOSWAP 0x00000002 /* BAR at offset 0x20 */ ++#define PCI_BAR1_NOSWAP 0x00000001 /* BAR at affset 0x1c */ ++ ++ uint32 pciintstat; /* PCI interrupt mask/status */ ++#define MAILBOX1_SENT 0x08 ++#define MAILBOX0_SENT 0x04 ++#define MAILBOX1_MSG_RCV 0x02 ++#define MAILBOX0_MSG_RCV 0x01 ++ uint32 locbuscntrl; /* internal system bus control */ ++#define DIR_U2P_NOSWAP 0x00000002 ++#define EN_PCI_GPIO 0x00000001 ++ uint32 locintstat; /* internal system bus interrupt mask/status */ ++#define CSERR 0x0200 ++#define SERR 0x0100 ++#define EXT_PCI_INT 0x0080 ++#define DIR_FAILED 0x0040 ++#define DIR_COMPLETE 0x0020 ++#define PCI_CFG 0x0010 ++ uint32 unused5[7]; ++ ++ uint32 mailbox0; ++ uint32 mailbox1; ++ ++ uint32 pcicfgcntrl; /* internal system bus PCI configuration control */ ++#define PCI_CFG_REG_WRITE_EN 0x00000080 ++#define PCI_CFG_ADDR 0x0000003C ++ uint32 pcicfgdata; /* internal system bus PCI configuration data */ ++ ++ uint32 locch2ctl; /* PCI to interrnal system bus DMA (downstream) local control */ ++#define MPI_DMA_HALT 0x00000008 /* idle after finish current memory burst */ ++#define MPI_DMA_PKT_HALT 0x00000004 /* idle after an EOP flag is detected */ ++#define MPI_DMA_STALL 0x00000002 /* idle after an EOP flag is detected */ ++#define MPI_DMA_ENABLE 0x00000001 /* set to enable channel */ ++ uint32 locch2intStat; ++#define MPI_DMA_NO_DESC 0x00000004 /* no valid descriptors */ ++#define MPI_DMA_DONE 0x00000002 /* packet xfer complete */ ++#define MPI_DMA_BUFF_DONE 0x00000001 /* buffer done */ ++ uint32 locch2intMask; ++ uint32 unused6; ++ uint32 locch2descaddr; ++ uint32 locch2status1; ++#define LOCAL_DESC_STATE 0xE0000000 ++#define PCI_DESC_STATE 0x1C000000 ++#define BYTE_DONE 0x03FFC000 ++#define RING_ADDR 0x00003FFF ++ uint32 locch2status2; ++#define BUFPTR_OFFSET 0x1FFF0000 ++#define PCI_MASTER_STATE 0x000000C0 ++#define LOC_MASTER_STATE 0x00000038 ++#define CONTROL_STATE 0x00000007 ++ uint32 unused7; ++ ++ uint32 locch1Ctl; /*internal system bus to PCI DMA (upstream) local control */ ++#define DMA_U2P_LE 0x00000200 /* local bus is little endian */ ++#define DMA_U2P_NOSWAP 0x00000100 /* lccal bus is little endian but no data swapped */ ++ uint32 locch1intstat; ++ uint32 locch1intmask; ++ uint32 unused8; ++ uint32 locch1descaddr; ++ uint32 locch1status1; ++ uint32 locch1status2; ++ uint32 unused9; ++ ++ uint32 pcich1ctl; /* internal system bus to PCI DMA PCI control */ ++ uint32 pcich1intstat; ++ uint32 pcich1intmask; ++ uint32 pcich1descaddr; ++ uint32 pcich1status1; ++ uint32 pcich1status2; ++ ++ uint32 pcich2Ctl; /* PCI to internal system bus DMA PCI control */ ++ uint32 pcich2intstat; ++ uint32 pcich2intmask; ++ uint32 pcich2descaddr; ++ uint32 pcich2status1; ++ uint32 pcich2status2; ++ ++ uint32 perm_id; /* permanent device and vendor id */ ++ uint32 perm_rev; /* permanent revision id */ ++} MpiRegisters; ++ ++#define MPI ((volatile MpiRegisters * const) MPI_BASE) ++ ++/* PCI configuration address space start offset 0x40 */ ++#define BRCM_PCI_CONFIG_TIMER 0x40 ++#define BRCM_PCI_CONFIG_TIMER_RETRY_MASK 0x0000FF00 ++#define BRCM_PCI_CONFIG_TIMER_TRDY_MASK 0x000000FF ++ ++/* USB host non-Open HCI register, USB_HOST_NON_OHCI, bit definitions. */ ++#define NON_OHCI_ENABLE_PORT1 0x00000001 /* Use USB port 1 for host, not dev */ ++#define NON_OHCI_BYTE_SWAP 0x00000008 /* Swap USB host registers */ ++ ++#define USBH_NON_OHCI ((volatile unsigned long * const) USB_HOST_NON_OHCI) ++ ++#endif ++ +diff -urN linux.old/arch/mips/bcm963xx/include/bcm_intr.h linux.dev/arch/mips/bcm963xx/include/bcm_intr.h +--- linux.old/arch/mips/bcm963xx/include/bcm_intr.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm963xx/include/bcm_intr.h 2006-08-25 00:39:38.000000000 +0200 +@@ -0,0 +1,59 @@ ++/* ++<:copyright-gpl ++ Copyright 2003 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++ ++#ifndef __BCM_INTR_H ++#define __BCM_INTR_H ++ ++#ifdef __cplusplus ++ extern "C" { ++#endif ++ ++#if defined(CONFIG_BCM96338) ++#include <6338_intr.h> ++#endif ++#if defined(CONFIG_BCM96345) ++#include <6345_intr.h> ++#endif ++#if defined(CONFIG_BCM96348) ++#include <6348_intr.h> ++#endif ++ ++/* defines */ ++struct pt_regs; ++typedef int (*FN_HANDLER) (int, void *, struct pt_regs *); ++ ++/* prototypes */ ++extern void enable_brcm_irq(unsigned int irq); ++extern void disable_brcm_irq(unsigned int irq); ++extern int request_external_irq(unsigned int irq, ++ FN_HANDLER handler, unsigned long irqflags, ++ const char * devname, void *dev_id); ++extern unsigned int BcmHalMapInterrupt(FN_HANDLER isr, unsigned int param, ++ unsigned int interruptId); ++extern void dump_intr_regs(void); ++ ++/* compatibility definitions */ ++#define BcmHalInterruptEnable(irq) enable_brcm_irq( irq ) ++#define BcmHalInterruptDisable(irq) disable_brcm_irq( irq ) ++ ++#ifdef __cplusplus ++ } ++#endif ++ ++#endif +diff -urN linux.old/arch/mips/bcm963xx/include/bcm_map_part.h linux.dev/arch/mips/bcm963xx/include/bcm_map_part.h +--- linux.old/arch/mips/bcm963xx/include/bcm_map_part.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm963xx/include/bcm_map_part.h 2006-08-25 00:39:38.000000000 +0200 +@@ -0,0 +1,34 @@ ++/* ++<:copyright-gpl ++ Copyright 2004 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++ ++#ifndef __BCM_MAP_PART_H ++#define __BCM_MAP_PART_H ++ ++#if defined(CONFIG_BCM96338) ++#include <6338_map_part.h> ++#endif ++#if defined(CONFIG_BCM96345) ++#include <6345_map_part.h> ++#endif ++#if defined(CONFIG_BCM96348) ++#include <6348_map_part.h> ++#endif ++ ++#endif ++ +diff -urN linux.old/arch/mips/bcm963xx/include/bcmpci.h linux.dev/arch/mips/bcm963xx/include/bcmpci.h +--- linux.old/arch/mips/bcm963xx/include/bcmpci.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm963xx/include/bcmpci.h 2006-08-25 00:39:38.000000000 +0200 +@@ -0,0 +1,87 @@ ++/* ++<:copyright-gpl ++ Copyright 2004 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++ ++// ++// bcmpci.h - bcm96348 PCI, Cardbus, and PCMCIA definition ++// ++#ifndef BCMPCI_H ++#define BCMPCI_H ++ ++/* Memory window in internal system bus address space */ ++#define BCM_PCI_MEM_BASE 0x08000000 ++/* IO window in internal system bus address space */ ++#define BCM_PCI_IO_BASE 0x0C000000 ++ ++#define BCM_PCI_ADDR_MASK 0x1fffffff ++ ++/* Memory window size (range) */ ++#define BCM_PCI_MEM_SIZE_16MB 0x01000000 ++/* IO window size (range) */ ++#define BCM_PCI_IO_SIZE_64KB 0x00010000 ++ ++/* PCI Configuration and I/O space acesss */ ++#define BCM_PCI_CFG(d, f, o) ( (d << 11) | (f << 8) | (o/4 << 2) ) ++ ++/* fake USB PCI slot */ ++#define USB_HOST_SLOT 9 ++#define USB_BAR0_MEM_SIZE 0x0800 ++ ++#define BCM_HOST_MEM_SPACE1 0x10000000 ++#define BCM_HOST_MEM_SPACE2 0x00000000 ++ ++/* ++ * EBI bus clock is 33MHz and share with PCI bus ++ * each clock cycle is 30ns. ++ */ ++/* attribute memory access wait cnt for 4306 */ ++#define PCMCIA_ATTR_CE_HOLD 3 // data hold time 70ns ++#define PCMCIA_ATTR_CE_SETUP 3 // data setup time 50ns ++#define PCMCIA_ATTR_INACTIVE 6 // time between read/write cycles 180ns. For the total cycle time 600ns (cnt1+cnt2+cnt3+cnt4) ++#define PCMCIA_ATTR_ACTIVE 10 // OE/WE pulse width 300ns ++ ++/* common memory access wait cnt for 4306 */ ++#define PCMCIA_MEM_CE_HOLD 1 // data hold time 30ns ++#define PCMCIA_MEM_CE_SETUP 1 // data setup time 30ns ++#define PCMCIA_MEM_INACTIVE 2 // time between read/write cycles 40ns. For the total cycle time 250ns (cnt1+cnt2+cnt3+cnt4) ++#define PCMCIA_MEM_ACTIVE 5 // OE/WE pulse width 150ns ++ ++#define PCCARD_VCC_MASK 0x00070000 // Mask Reset also ++#define PCCARD_VCC_33V 0x00010000 ++#define PCCARD_VCC_50V 0x00020000 ++ ++typedef enum { ++ MPI_CARDTYPE_NONE, // No Card in slot ++ MPI_CARDTYPE_PCMCIA, // 16-bit PCMCIA card in slot ++ MPI_CARDTYPE_CARDBUS, // 32-bit CardBus card in slot ++} CardType; ++ ++#define CARDBUS_SLOT 0 // Slot 0 is default for CardBus ++ ++#define pcmciaAttrOffset 0x00200000 ++#define pcmciaMemOffset 0x00000000 ++// Needs to be right above PCI I/O space. Give 0x8000 (32K) to PCMCIA. ++#define pcmciaIoOffset (BCM_PCI_IO_BASE + 0x80000) ++// Base Address is that mapped into the MPI ChipSelect registers. ++// UBUS bridge MemoryWindow 0 outputs a 0x00 for the base. ++#define pcmciaBase 0xbf000000 ++#define pcmciaAttr (pcmciaAttrOffset | pcmciaBase) ++#define pcmciaMem (pcmciaMemOffset | pcmciaBase) ++#define pcmciaIo (pcmciaIoOffset | pcmciaBase) ++ ++#endif +diff -urN linux.old/arch/mips/bcm963xx/include/bcmTag.h linux.dev/arch/mips/bcm963xx/include/bcmTag.h +--- linux.old/arch/mips/bcm963xx/include/bcmTag.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm963xx/include/bcmTag.h 2006-08-25 00:39:38.000000000 +0200 +@@ -0,0 +1,153 @@ ++/* ++<:copyright-gpl ++ Copyright 2002 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++//************************************************************************************** ++// File Name : bcmTag.h ++// ++// Description: add tag with validation system to the firmware image file to be uploaded ++// via http ++// ++// Created : 02/28/2002 seanl ++//************************************************************************************** ++ ++#ifndef _BCMTAG_H_ ++#define _BCMTAG_H_ ++ ++ ++#define BCM_SIG_1 "Broadcom Corporation" ++#define BCM_SIG_2 "ver. 2.0" // was "firmware version 2.0" now it is split 6 char out for chip id. ++ ++#define BCM_TAG_VER "6" ++#define BCM_TAG_VER_LAST "26" ++ ++// file tag (head) structure all is in clear text except validationTokens (crc, md5, sha1, etc). Total: 128 unsigned chars ++#define TAG_LEN 256 ++#define TAG_VER_LEN 4 ++#define SIG_LEN 20 ++#define SIG_LEN_2 14 // Original second SIG = 20 is now devided into 14 for SIG_LEN_2 and 6 for CHIP_ID ++#define CHIP_ID_LEN 6 ++#define IMAGE_LEN 10 ++#define ADDRESS_LEN 12 ++#define FLAG_LEN 2 ++#define TOKEN_LEN 20 ++#define BOARD_ID_LEN 16 ++#define RESERVED_LEN (TAG_LEN - TAG_VER_LEN - SIG_LEN - SIG_LEN_2 - CHIP_ID_LEN - BOARD_ID_LEN - \ ++ (4*IMAGE_LEN) - (3*ADDRESS_LEN) - (3*FLAG_LEN) - (2*TOKEN_LEN)) ++ ++ ++// TAG for downloadable image (kernel plus file system) ++typedef struct _FILE_TAG ++{ ++ unsigned char tagVersion[TAG_VER_LEN]; // tag version. Will be 2 here. ++ unsigned char signiture_1[SIG_LEN]; // text line for company info ++ unsigned char signiture_2[SIG_LEN_2]; // additional info (can be version number) ++ unsigned char chipId[CHIP_ID_LEN]; // chip id ++ unsigned char boardId[BOARD_ID_LEN]; // board id ++ unsigned char bigEndian[FLAG_LEN]; // if = 1 - big, = 0 - little endia of the host ++ unsigned char totalImageLen[IMAGE_LEN]; // the sum of all the following length ++ unsigned char cfeAddress[ADDRESS_LEN]; // if non zero, cfe starting address ++ unsigned char cfeLen[IMAGE_LEN]; // if non zero, cfe size in clear ASCII text. ++ unsigned char rootfsAddress[ADDRESS_LEN]; // if non zero, filesystem starting address ++ unsigned char rootfsLen[IMAGE_LEN]; // if non zero, filesystem size in clear ASCII text. ++ unsigned char kernelAddress[ADDRESS_LEN]; // if non zero, kernel starting address ++ unsigned char kernelLen[IMAGE_LEN]; // if non zero, kernel size in clear ASCII text. ++ unsigned char dualImage[FLAG_LEN]; // if 1, dual image ++ unsigned char inactiveLen[FLAG_LEN]; // if 1, the image is INACTIVE; if 0, active ++ unsigned char reserved[RESERVED_LEN]; // reserved for later use ++ unsigned char imageValidationToken[TOKEN_LEN];// image validation token - can be crc, md5, sha; for ++ // now will be 4 unsigned char crc ++ unsigned char tagValidationToken[TOKEN_LEN]; // validation token for tag(from signiture_1 to end of // mageValidationToken) ++} FILE_TAG, *PFILE_TAG; ++ ++#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */ ++#define CRC_LEN 4 ++ ++// only included if for bcmTag.exe program ++#ifdef BCMTAG_EXE_USE ++ ++static unsigned long Crc32_table[256] = { ++ 0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA, ++ 0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3, ++ 0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988, ++ 0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91, ++ 0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE, ++ 0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7, ++ 0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC, ++ 0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5, ++ 0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172, ++ 0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B, ++ 0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940, ++ 0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59, ++ 0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116, ++ 0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F, ++ 0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924, ++ 0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D, ++ 0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A, ++ 0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433, ++ 0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818, ++ 0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01, ++ 0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E, ++ 0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457, ++ 0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C, ++ 0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65, ++ 0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2, ++ 0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB, ++ 0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0, ++ 0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9, ++ 0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086, ++ 0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F, ++ 0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4, ++ 0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD, ++ 0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A, ++ 0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683, ++ 0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8, ++ 0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1, ++ 0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE, ++ 0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7, ++ 0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC, ++ 0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5, ++ 0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252, ++ 0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B, ++ 0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60, ++ 0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79, ++ 0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236, ++ 0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F, ++ 0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04, ++ 0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D, ++ 0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A, ++ 0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713, ++ 0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38, ++ 0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21, ++ 0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E, ++ 0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777, ++ 0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C, ++ 0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45, ++ 0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2, ++ 0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB, ++ 0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0, ++ 0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9, ++ 0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6, ++ 0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF, ++ 0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94, ++ 0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D ++}; ++#endif // BCMTAG_USE ++ ++ ++#endif // _BCMTAG_H_ ++ +diff -urN linux.old/arch/mips/bcm963xx/include/bcmtypes.h linux.dev/arch/mips/bcm963xx/include/bcmtypes.h +--- linux.old/arch/mips/bcm963xx/include/bcmtypes.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm963xx/include/bcmtypes.h 2006-08-25 00:39:38.000000000 +0200 +@@ -0,0 +1,163 @@ ++/* ++<:copyright-gpl ++ Copyright 2002 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++ ++// ++// bcmtypes.h - misc useful typedefs ++// ++#ifndef BCMTYPES_H ++#define BCMTYPES_H ++ ++// These are also defined in typedefs.h in the application area, so I need to ++// protect against re-definition. ++ ++#ifndef _TYPEDEFS_H_ ++typedef unsigned char uint8; ++typedef unsigned short uint16; ++typedef unsigned long uint32; ++typedef signed char int8; ++typedef signed short int16; ++typedef signed long int32; ++#if !defined(__cplusplus) ++typedef int bool; ++#endif ++#endif ++ ++typedef unsigned char byte; ++// typedef unsigned long sem_t; ++ ++typedef unsigned long HANDLE,*PULONG,DWORD,*PDWORD; ++typedef signed long LONG,*PLONG; ++ ++typedef unsigned int *PUINT; ++typedef signed int INT; ++ ++typedef unsigned short *PUSHORT; ++typedef signed short SHORT,*PSHORT; ++typedef unsigned short WORD,*PWORD; ++ ++typedef unsigned char *PUCHAR; ++typedef signed char *PCHAR; ++ ++typedef void *PVOID; ++ ++typedef unsigned char BOOLEAN, *PBOOL, *PBOOLEAN; ++ ++typedef unsigned char BYTE,*PBYTE; ++ ++//#ifndef __GNUC__ ++//The following has been defined in Vxworks internally: vxTypesOld.h ++//redefine under vxworks will cause error ++typedef signed int *PINT; ++ ++typedef signed char INT8; ++typedef signed short INT16; ++typedef signed long INT32; ++ ++typedef unsigned char UINT8; ++typedef unsigned short UINT16; ++typedef unsigned long UINT32; ++ ++typedef unsigned char UCHAR; ++typedef unsigned short USHORT; ++typedef unsigned int UINT; ++typedef unsigned long ULONG; ++ ++typedef void VOID; ++typedef unsigned char BOOL; ++ ++//#endif /* __GNUC__ */ ++ ++ ++// These are also defined in typedefs.h in the application area, so I need to ++// protect against re-definition. ++#ifndef TYPEDEFS_H ++ ++// Maximum and minimum values for a signed 16 bit integer. ++#define MAX_INT16 32767 ++#define MIN_INT16 -32768 ++ ++// Useful for true/false return values. This uses the ++// Taligent notation (k for constant). ++typedef enum ++{ ++ kFalse = 0, ++ kTrue = 1 ++} Bool; ++ ++#endif ++ ++/* macros to protect against unaligned accesses */ ++ ++#if 0 ++/* first arg is an address, second is a value */ ++#define PUT16( a, d ) { \ ++ *((byte *)a) = (byte)((d)>>8); \ ++ *(((byte *)a)+1) = (byte)(d); \ ++} ++ ++#define PUT32( a, d ) { \ ++ *((byte *)a) = (byte)((d)>>24); \ ++ *(((byte *)a)+1) = (byte)((d)>>16); \ ++ *(((byte *)a)+2) = (byte)((d)>>8); \ ++ *(((byte *)a)+3) = (byte)(d); \ ++} ++ ++/* first arg is an address, returns a value */ ++#define GET16( a ) ( \ ++ (*((byte *)a) << 8) | \ ++ (*(((byte *)a)+1)) \ ++) ++ ++#define GET32( a ) ( \ ++ (*((byte *)a) << 24) | \ ++ (*(((byte *)a)+1) << 16) | \ ++ (*(((byte *)a)+2) << 8) | \ ++ (*(((byte *)a)+3)) \ ++) ++#endif ++ ++#ifndef YES ++#define YES 1 ++#endif ++ ++#ifndef NO ++#define NO 0 ++#endif ++ ++#ifndef IN ++#define IN ++#endif ++ ++#ifndef OUT ++#define OUT ++#endif ++ ++#ifndef TRUE ++#define TRUE 1 ++#endif ++ ++#ifndef FALSE ++#define FALSE 0 ++#endif ++ ++#define READ32(addr) (*(volatile UINT32 *)((ULONG)&addr)) ++#define READ16(addr) (*(volatile UINT16 *)((ULONG)&addr)) ++#define READ8(addr) (*(volatile UINT8 *)((ULONG)&addr)) ++ ++#endif +diff -urN linux.old/arch/mips/bcm963xx/include/board.h linux.dev/arch/mips/bcm963xx/include/board.h +--- linux.old/arch/mips/bcm963xx/include/board.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm963xx/include/board.h 2006-08-25 01:52:34.000000000 +0200 +@@ -0,0 +1,373 @@ ++/* ++<:copyright-gpl ++ Copyright 2002 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++/***********************************************************************/ ++/* */ ++/* MODULE: board.h */ ++/* DATE: 97/02/18 */ ++/* PURPOSE: Board specific information. This module should include */ ++/* all base device addresses and board specific macros. */ ++/* */ ++/***********************************************************************/ ++#ifndef _BOARD_H ++#define _BOARD_H ++ ++/*****************************************************************************/ ++/* Misc board definitions */ ++/*****************************************************************************/ ++ ++#define DYING_GASP_API ++ ++/*****************************************************************************/ ++/* Physical Memory Map */ ++/*****************************************************************************/ ++ ++#define PHYS_DRAM_BASE 0x00000000 /* Dynamic RAM Base */ ++#define PHYS_FLASH_BASE 0x1FC00000 /* Flash Memory */ ++ ++/*****************************************************************************/ ++/* Note that the addresses above are physical addresses and that programs */ ++/* have to use converted addresses defined below: */ ++/*****************************************************************************/ ++#define DRAM_BASE (0x80000000 | PHYS_DRAM_BASE) /* cached DRAM */ ++#define DRAM_BASE_NOCACHE (0xA0000000 | PHYS_DRAM_BASE) /* uncached DRAM */ ++#define FLASH_BASE (0xA0000000 | PHYS_FLASH_BASE) /* uncached Flash */ ++ ++/*****************************************************************************/ ++/* Select the PLL value to get the desired CPU clock frequency. */ ++/* */ ++/* */ ++/*****************************************************************************/ ++#define FPERIPH 50000000 ++ ++#define ONEK 1024 ++#define BLK64K (64*ONEK) ++#define FLASH45_BLKS_BOOT_ROM 1 ++#define FLASH45_LENGTH_BOOT_ROM (FLASH45_BLKS_BOOT_ROM * BLK64K) ++#define FLASH_RESERVED_AT_END (64*ONEK) /*reserved for PSI, scratch pad*/ ++ ++/*****************************************************************************/ ++/* Note that the addresses above are physical addresses and that programs */ ++/* have to use converted addresses defined below: */ ++/*****************************************************************************/ ++#define DRAM_BASE (0x80000000 | PHYS_DRAM_BASE) /* cached DRAM */ ++#define DRAM_BASE_NOCACHE (0xA0000000 | PHYS_DRAM_BASE) /* uncached DRAM */ ++#define FLASH_BASE (0xA0000000 | PHYS_FLASH_BASE) /* uncached Flash */ ++ ++/*****************************************************************************/ ++/* Select the PLL value to get the desired CPU clock frequency. */ ++/* */ ++/* */ ++/*****************************************************************************/ ++#define FPERIPH 50000000 ++ ++#define SDRAM_TYPE_ADDRESS_OFFSET 16 ++#define NVRAM_DATA_OFFSET 0x0580 ++#define NVRAM_DATA_ID 0x0f1e2d3c ++#define BOARD_SDRAM_TYPE *(unsigned long *) \ ++ (FLASH_BASE + SDRAM_TYPE_ADDRESS_OFFSET) ++ ++#define ONEK 1024 ++#define BLK64K (64*ONEK) ++ ++// nvram and psi flash definitions for 45 ++#define FLASH45_LENGTH_NVRAM ONEK // 1k nvram ++#define NVRAM_PSI_DEFAULT 24 // default psi in K byes ++ ++/*****************************************************************************/ ++/* NVRAM Offset and definition */ ++/*****************************************************************************/ ++ ++#define NVRAM_VERSION_NUMBER 2 ++#define NVRAM_VERSION_NUMBER_ADDRESS 0 ++ ++#define NVRAM_BOOTLINE_LEN 256 ++#define NVRAM_BOARD_ID_STRING_LEN 16 ++#define NVRAM_MAC_ADDRESS_LEN 6 ++#define NVRAM_MAC_COUNT_MAX 32 ++ ++/*****************************************************************************/ ++/* Misc Offsets */ ++/*****************************************************************************/ ++ ++#define CFE_VERSION_OFFSET 0x0570 ++#define CFE_VERSION_MARK_SIZE 5 ++#define CFE_VERSION_SIZE 5 ++ ++typedef struct ++{ ++ unsigned long ulVersion; ++ char szBootline[NVRAM_BOOTLINE_LEN]; ++ char szBoardId[NVRAM_BOARD_ID_STRING_LEN]; ++ unsigned long ulReserved1[2]; ++ unsigned long ulNumMacAddrs; ++ unsigned char ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN]; ++ char chReserved[2]; ++ unsigned long ulCheckSum; ++} NVRAM_DATA, *PNVRAM_DATA; ++ ++ ++/*****************************************************************************/ ++/* board ioctl calls for flash, led and some other utilities */ ++/*****************************************************************************/ ++ ++ ++/* Defines. for board driver */ ++#define BOARD_IOCTL_MAGIC 'B' ++#define BOARD_DRV_MAJOR 206 ++ ++#define MAC_ADDRESS_ANY (unsigned long) -1 ++ ++#define BOARD_IOCTL_FLASH_INIT \ ++ _IOWR(BOARD_IOCTL_MAGIC, 0, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_FLASH_WRITE \ ++ _IOWR(BOARD_IOCTL_MAGIC, 1, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_FLASH_READ \ ++ _IOWR(BOARD_IOCTL_MAGIC, 2, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_GET_NR_PAGES \ ++ _IOWR(BOARD_IOCTL_MAGIC, 3, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_DUMP_ADDR \ ++ _IOWR(BOARD_IOCTL_MAGIC, 4, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_SET_MEMORY \ ++ _IOWR(BOARD_IOCTL_MAGIC, 5, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_MIPS_SOFT_RESET \ ++ _IOWR(BOARD_IOCTL_MAGIC, 6, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_LED_CTRL \ ++ _IOWR(BOARD_IOCTL_MAGIC, 7, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_GET_ID \ ++ _IOWR(BOARD_IOCTL_MAGIC, 8, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_GET_MAC_ADDRESS \ ++ _IOWR(BOARD_IOCTL_MAGIC, 9, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_RELEASE_MAC_ADDRESS \ ++ _IOWR(BOARD_IOCTL_MAGIC, 10, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_GET_PSI_SIZE \ ++ _IOWR(BOARD_IOCTL_MAGIC, 11, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_GET_SDRAM_SIZE \ ++ _IOWR(BOARD_IOCTL_MAGIC, 12, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_SET_MONITOR_FD \ ++ _IOWR(BOARD_IOCTL_MAGIC, 13, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_WAKEUP_MONITOR_TASK \ ++ _IOWR(BOARD_IOCTL_MAGIC, 14, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_GET_BOOTLINE \ ++ _IOWR(BOARD_IOCTL_MAGIC, 15, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_SET_BOOTLINE \ ++ _IOWR(BOARD_IOCTL_MAGIC, 16, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_GET_BASE_MAC_ADDRESS \ ++ _IOWR(BOARD_IOCTL_MAGIC, 17, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_GET_CHIP_ID \ ++ _IOWR(BOARD_IOCTL_MAGIC, 18, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_GET_NUM_ENET \ ++ _IOWR(BOARD_IOCTL_MAGIC, 19, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_GET_CFE_VER \ ++ _IOWR(BOARD_IOCTL_MAGIC, 20, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_GET_ENET_CFG \ ++ _IOWR(BOARD_IOCTL_MAGIC, 21, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_GET_WLAN_ANT_INUSE \ ++ _IOWR(BOARD_IOCTL_MAGIC, 22, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_SET_TRIGGER_EVENT \ ++ _IOWR(BOARD_IOCTL_MAGIC, 23, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_GET_TRIGGER_EVENT \ ++ _IOWR(BOARD_IOCTL_MAGIC, 24, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_UNSET_TRIGGER_EVENT \ ++ _IOWR(BOARD_IOCTL_MAGIC, 25, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_SET_SES_LED \ ++ _IOWR(BOARD_IOCTL_MAGIC, 26, BOARD_IOCTL_PARMS) ++ ++//<<JUNHON, 2004/09/15, get reset button status , tim hou , 05/04/12 ++#define RESET_BUTTON_UP 1 ++#define RESET_BUTTON_PRESSDOWN 0 ++#define BOARD_IOCTL_GET_RESETHOLD \ ++ _IOWR(BOARD_IOCTL_MAGIC, 27, BOARD_IOCTL_PARMS) ++//>>JUNHON, 2004/09/15 ++ ++// for the action in BOARD_IOCTL_PARMS for flash operation ++typedef enum ++{ ++ PERSISTENT, ++ NVRAM, ++ BCM_IMAGE_CFE, ++ BCM_IMAGE_FS, ++ BCM_IMAGE_KERNEL, ++ BCM_IMAGE_WHOLE, ++ SCRATCH_PAD, ++ FLASH_SIZE, ++} BOARD_IOCTL_ACTION; ++ ++ ++typedef struct boardIoctParms ++{ ++ char *string; ++ char *buf; ++ int strLen; ++ int offset; ++ BOARD_IOCTL_ACTION action; /* flash read/write: nvram, persistent, bcm image */ ++ int result; ++} BOARD_IOCTL_PARMS; ++ ++ ++// LED defines ++typedef enum ++{ ++ kLedAdsl, ++ kLedWireless, ++ kLedUsb, ++ kLedHpna, ++ kLedWanData, ++ kLedPPP, ++ kLedVoip, ++ kLedSes, ++ kLedLan, ++ kLedSelfTest, ++ kLedEnd, // NOTE: Insert the new led name before this one. Alway stay at the end. ++} BOARD_LED_NAME; ++ ++typedef enum ++{ ++ kLedStateOff, /* turn led off */ ++ kLedStateOn, /* turn led on */ ++ kLedStateFail, /* turn led on red */ ++ kLedStateBlinkOnce, /* blink once, ~100ms and ignore the same call during the 100ms period */ ++ kLedStateSlowBlinkContinues, /* slow blink continues at ~600ms interval */ ++ kLedStateFastBlinkContinues, /* fast blink continues at ~200ms interval */ ++} BOARD_LED_STATE; ++ ++ ++// virtual and physical map pair defined in board.c ++typedef struct ledmappair ++{ ++ BOARD_LED_NAME ledName; // virtual led name ++ BOARD_LED_STATE ledInitState; // initial led state when the board boots. ++ unsigned short ledMask; // physical GPIO pin mask ++ unsigned short ledActiveLow; // reset bit to turn on LED ++ unsigned short ledMaskFail; // physical GPIO pin mask for state failure ++ unsigned short ledActiveLowFail;// reset bit to turn on LED ++} LED_MAP_PAIR, *PLED_MAP_PAIR; ++ ++typedef void (*HANDLE_LED_FUNC)(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState); ++ ++/* Flash storage address information that is determined by the flash driver. */ ++typedef struct flashaddrinfo ++{ ++ int flash_persistent_start_blk; ++ int flash_persistent_number_blk; ++ int flash_persistent_length; ++ unsigned long flash_persistent_blk_offset; ++ int flash_scratch_pad_start_blk; // start before psi (SP_BUF_LEN) ++ int flash_scratch_pad_number_blk; ++ int flash_scratch_pad_length; ++ unsigned long flash_scratch_pad_blk_offset; ++ int flash_nvram_start_blk; ++ int flash_nvram_number_blk; ++ int flash_nvram_length; ++ unsigned long flash_nvram_blk_offset; ++} FLASH_ADDR_INFO, *PFLASH_ADDR_INFO; ++ ++// scratch pad defines ++/* SP - Persisten Scratch Pad format: ++ sp header : 32 bytes ++ tokenId-1 : 8 bytes ++ tokenId-1 len : 4 bytes ++ tokenId-1 data ++ .... ++ tokenId-n : 8 bytes ++ tokenId-n len : 4 bytes ++ tokenId-n data ++*/ ++ ++#define MAGIC_NUM_LEN 8 ++#define MAGIC_NUMBER "gOGoBrCm" ++#define TOKEN_NAME_LEN 16 ++#define SP_VERSION 1 ++#define SP_MAX_LEN 8 * 1024 // 8k buf before psi ++#define SP_RESERVERD 16 ++ ++typedef struct _SP_HEADER ++{ ++ char SPMagicNum[MAGIC_NUM_LEN]; // 8 bytes of magic number ++ int SPVersion; // version number ++ int SPUsedLen; // used sp len ++ char SPReserved[SP_RESERVERD]; // reservied, total 32 bytes ++} SP_HEADER, *PSP_HEADER; ++ ++typedef struct _TOKEN_DEF ++{ ++ char tokenName[TOKEN_NAME_LEN]; ++ int tokenLen; ++} SP_TOKEN, *PSP_TOKEN; ++ ++ ++/*****************************************************************************/ ++/* Function Prototypes */ ++/*****************************************************************************/ ++#if !defined(__ASM_ASM_H) ++void dumpaddr( unsigned char *pAddr, int nLen ); ++ ++int kerSysNvRamGet(char *string, int strLen, int offset); ++int kerSysNvRamSet(char *string, int strLen, int offset); ++int kerSysPersistentGet(char *string, int strLen, int offset); ++int kerSysPersistentSet(char *string, int strLen, int offset); ++int kerSysScratchPadGet(char *tokName, char *tokBuf, int tokLen); ++int kerSysScratchPadSet(char *tokName, char *tokBuf, int tokLen); ++int kerSysBcmImageSet( int flash_start_addr, char *string, int size); ++int kerSysGetMacAddress( unsigned char *pucaAddr, unsigned long ulId ); ++int kerSysReleaseMacAddress( unsigned char *pucaAddr ); ++int kerSysGetSdramSize( void ); ++void kerSysGetBootline(char *string, int strLen); ++void kerSysSetBootline(char *string, int strLen); ++void kerSysMipsSoftReset(void); ++void kerSysLedCtrl(BOARD_LED_NAME, BOARD_LED_STATE); ++void kerSysLedRegisterHwHandler( BOARD_LED_NAME, HANDLE_LED_FUNC, int ); ++int kerSysFlashSizeGet(void); ++void kerSysRegisterDyingGaspHandler(char *devname, void *cbfn, void *context); ++void kerSysDeregisterDyingGaspHandler(char *devname); ++void kerSysWakeupMonitorTask( void ); ++#endif ++ ++#define BOOT_CFE 0 ++#define BOOT_REDBOOT 1 ++ ++extern int boot_loader_type; ++ ++#endif /* _BOARD_H */ ++ +diff -urN linux.old/arch/mips/bcm963xx/int-handler.S linux.dev/arch/mips/bcm963xx/int-handler.S +--- linux.old/arch/mips/bcm963xx/int-handler.S 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm963xx/int-handler.S 2006-08-25 02:13:33.000000000 +0200 +@@ -0,0 +1,59 @@ ++/* ++<:copyright-gpl ++ Copyright 2002 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++/* ++ * Generic interrupt handler for Broadcom MIPS boards ++ */ ++ ++#include <linux/config.h> ++ ++#include <asm/asm.h> ++#include <asm/mipsregs.h> ++#include <asm/regdef.h> ++#include <asm/stackframe.h> ++ ++/* ++ * MIPS IRQ Source ++ * -------- ------ ++ * 0 Software (ignored) ++ * 1 Software (ignored) ++ * 2 Combined hardware interrupt (hw0) ++ * 3 Hardware ++ * 4 Hardware ++ * 5 Hardware ++ * 6 Hardware ++ * 7 R4k timer ++ */ ++ ++ .text ++ .set noreorder ++ .set noat ++ .align 5 ++ NESTED(brcmIRQ, PT_SIZE, sp) ++ SAVE_ALL ++ CLI ++ .set noreorder ++ .set at ++ ++ jal plat_irq_dispatch ++ move a0, sp ++ ++ j ret_from_irq ++ nop ++ ++ END(brcmIRQ) +diff -urN linux.old/arch/mips/bcm963xx/irq.c linux.dev/arch/mips/bcm963xx/irq.c +--- linux.old/arch/mips/bcm963xx/irq.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm963xx/irq.c 2006-08-25 03:54:34.000000000 +0200 +@@ -0,0 +1,256 @@ ++/* ++<:copyright-gpl ++ Copyright 2002 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++/* ++ * Interrupt control functions for Broadcom 963xx MIPS boards ++ */ ++ ++#include <asm/atomic.h> ++ ++#include <linux/delay.h> ++#include <linux/init.h> ++#include <linux/ioport.h> ++#include <linux/irq.h> ++#include <linux/interrupt.h> ++#include <linux/kernel.h> ++#include <linux/slab.h> ++#include <linux/module.h> ++ ++#include <asm/irq.h> ++#include <asm/mipsregs.h> ++#include <asm/addrspace.h> ++#include <asm/signal.h> ++#include <bcm_map_part.h> ++#include <bcm_intr.h> ++ ++static void irq_dispatch_int(struct pt_regs *regs) ++{ ++ unsigned int pendingIrqs; ++ static unsigned int irqBit; ++ static unsigned int isrNumber = 31; ++ ++ pendingIrqs = PERF->IrqStatus & PERF->IrqMask; ++ if (!pendingIrqs) { ++ return; ++ } ++ ++ while (1) { ++ irqBit <<= 1; ++ isrNumber++; ++ if (isrNumber == 32) { ++ isrNumber = 0; ++ irqBit = 0x1; ++ } ++ if (pendingIrqs & irqBit) { ++ PERF->IrqMask &= ~irqBit; // mask ++ do_IRQ(isrNumber + INTERNAL_ISR_TABLE_OFFSET, regs); ++ break; ++ } ++ } ++} ++ ++static void irq_dispatch_ext(uint32 irq, struct pt_regs *regs) ++{ ++ if (!(PERF->ExtIrqCfg & (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)))) { ++ printk("**** Ext IRQ mask. Should not dispatch ****\n"); ++ } ++ /* disable and clear interrupt in the controller */ ++ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_CLEAR_SHFT)); ++ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)); ++ do_IRQ(irq, regs); ++} ++ ++ ++extern void brcm_timer_interrupt(struct pt_regs *regs); ++ ++asmlinkage void plat_irq_dispatch(struct pt_regs *regs) ++{ ++ u32 cause; ++ while((cause = (read_c0_cause()& CAUSEF_IP))) { ++ if (cause & CAUSEF_IP7) ++ brcm_timer_interrupt(regs); ++ else if (cause & CAUSEF_IP2) ++ irq_dispatch_int(regs); ++ else if (cause & CAUSEF_IP3) ++ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_0, regs); ++ else if (cause & CAUSEF_IP4) ++ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_1, regs); ++ else if (cause & CAUSEF_IP5) ++ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_2, regs); ++ else if (cause & CAUSEF_IP6) ++ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_3, regs); ++ local_irq_disable(); ++ } ++} ++ ++ ++void enable_brcm_irq(unsigned int irq) ++{ ++ unsigned long flags; ++ ++ local_irq_save(flags); ++ if( irq >= INTERNAL_ISR_TABLE_OFFSET ) { ++ PERF->IrqMask |= (1 << (irq - INTERNAL_ISR_TABLE_OFFSET)); ++ } ++ else if (irq >= INTERRUPT_ID_EXTERNAL_0 && irq <= INTERRUPT_ID_EXTERNAL_3) { ++ /* enable and clear interrupt in the controller */ ++ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_CLEAR_SHFT)); ++ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)); ++ } ++ local_irq_restore(flags); ++} ++ ++void disable_brcm_irq(unsigned int irq) ++{ ++ unsigned long flags; ++ ++ local_irq_save(flags); ++ if( irq >= INTERNAL_ISR_TABLE_OFFSET ) { ++ PERF->IrqMask &= ~(1 << (irq - INTERNAL_ISR_TABLE_OFFSET)); ++ } ++ else if (irq >= INTERRUPT_ID_EXTERNAL_0 && irq <= INTERRUPT_ID_EXTERNAL_3) { ++ /* disable interrupt in the controller */ ++ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)); ++ } ++ local_irq_restore(flags); ++} ++ ++void ack_brcm_irq(unsigned int irq) ++{ ++ /* Already done in brcm_irq_dispatch */ ++} ++ ++unsigned int startup_brcm_irq(unsigned int irq) ++{ ++ enable_brcm_irq(irq); ++ ++ return 0; /* never anything pending */ ++} ++ ++unsigned int startup_brcm_none(unsigned int irq) ++{ ++ return 0; ++} ++ ++void end_brcm_irq(unsigned int irq) ++{ ++ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) ++ enable_brcm_irq(irq); ++} ++ ++void end_brcm_none(unsigned int irq) ++{ ++} ++ ++static struct hw_interrupt_type brcm_irq_type = { ++ .typename = "MIPS", ++ .startup = startup_brcm_irq, ++ .shutdown = disable_brcm_irq, ++ .enable = enable_brcm_irq, ++ .disable = disable_brcm_irq, ++ .ack = ack_brcm_irq, ++ .end = end_brcm_irq, ++ .set_affinity = NULL ++}; ++ ++static struct hw_interrupt_type brcm_irq_no_end_type = { ++ .typename = "MIPS", ++ .startup = startup_brcm_none, ++ .shutdown = disable_brcm_irq, ++ .enable = enable_brcm_irq, ++ .disable = disable_brcm_irq, ++ .ack = ack_brcm_irq, ++ .end = end_brcm_none, ++ .set_affinity = NULL ++}; ++ ++void __init arch_init_irq(void) ++{ ++ int i; ++ ++ clear_c0_status(ST0_BEV); ++ change_c0_status(ST0_IM, (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4)); ++ ++ for (i = 0; i < NR_IRQS; i++) { ++ irq_desc[i].status = IRQ_DISABLED; ++ irq_desc[i].action = 0; ++ irq_desc[i].depth = 1; ++ irq_desc[i].handler = &brcm_irq_type; ++ } ++} ++ ++int request_external_irq(unsigned int irq, ++ FN_HANDLER handler, ++ unsigned long irqflags, ++ const char * devname, ++ void *dev_id) ++{ ++ unsigned long flags; ++ ++ local_irq_save(flags); ++ ++ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_CLEAR_SHFT)); // Clear ++ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)); // Mask ++ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_INSENS_SHFT)); // Edge insesnsitive ++ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_LEVEL_SHFT)); // Level triggered ++ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_SENSE_SHFT)); // Low level ++ ++ local_irq_restore(flags); ++ ++ return( request_irq(irq, handler, irqflags, devname, dev_id) ); ++} ++ ++/* VxWorks compatibility function(s). */ ++ ++unsigned int BcmHalMapInterrupt(FN_HANDLER pfunc, unsigned int param, ++ unsigned int interruptId) ++{ ++ int nRet = -1; ++ char *devname; ++ ++ devname = kmalloc(16, GFP_KERNEL); ++ if (devname) ++ sprintf( devname, "brcm_%d", interruptId ); ++ ++ /* Set the IRQ description to not automatically enable the interrupt at ++ * the end of an ISR. The driver that handles the interrupt must ++ * explicitly call BcmHalInterruptEnable or enable_brcm_irq. This behavior ++ * is consistent with interrupt handling on VxWorks. ++ */ ++ irq_desc[interruptId].handler = &brcm_irq_no_end_type; ++ ++ if( interruptId >= INTERNAL_ISR_TABLE_OFFSET ) ++ { ++ nRet = request_irq( interruptId, pfunc, SA_SAMPLE_RANDOM | SA_INTERRUPT, ++ devname, (void *) param ); ++ } ++ else if (interruptId >= INTERRUPT_ID_EXTERNAL_0 && interruptId <= INTERRUPT_ID_EXTERNAL_3) ++ { ++ nRet = request_external_irq( interruptId, pfunc, SA_SAMPLE_RANDOM | SA_INTERRUPT, ++ devname, (void *) param ); ++ } ++ ++ return( nRet ); ++} ++ ++ ++EXPORT_SYMBOL(enable_brcm_irq); ++EXPORT_SYMBOL(disable_brcm_irq); ++EXPORT_SYMBOL(request_external_irq); ++EXPORT_SYMBOL(BcmHalMapInterrupt); ++ +diff -urN linux.old/arch/mips/bcm963xx/Kconfig linux.dev/arch/mips/bcm963xx/Kconfig +--- linux.old/arch/mips/bcm963xx/Kconfig 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm963xx/Kconfig 2006-08-25 01:22:39.000000000 +0200 +@@ -0,0 +1,138 @@ ++# Kernel and Driver configuration for Broadcom Commengine ADSL board ++choice ++ prompt "Broadcom Commengine ADSL board" ++ depends on MIPS_BRCM ++ default BCM96345 ++ help ++ Select different Broadcom ADSL board ++ ++config BCM96338 ++ bool "96338 ADSL board" ++ select DMA_NONCOHERENT ++ select HW_HAS_PCI ++ ++config BCM96345 ++ bool "96345 ADSL board" ++ select DMA_NONCOHERENT ++ select HW_HAS_PCI ++ ++config BCM96348 ++ bool "96348 ADSL board" ++ select DMA_NONCOHERENT ++ select HW_HAS_PCI ++ ++endchoice ++ ++config BCM_BOARD ++ bool "Support for Broadcom Board" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_SERIAL ++ bool "Support for Serial Port" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_ENET ++ tristate "Support for Ethernet" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_USB ++ tristate "Support for USB" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_WLAN ++ tristate "Support for Wireless" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_PCI ++ bool "Support for PCI" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ select PCI ++ ++config BCM_ATMAPI ++ tristate "Support for ATM" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_ATMTEST ++ tristate "Support for ATM Diagnostic" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_ADSL ++ tristate "Support for ADSL" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_ENDPOINT ++ tristate "Support for VOICE" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_PROCFS ++ tristate "Support for PROCFS" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_VDSL ++ tristate "Support for VDSL" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_SECURITY ++ tristate "Support for SECURITY" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_HPNA ++ tristate "Support for HPNA" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_BOARD_IMPL ++ int "Implementation index for ADSL Board" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_SERIAL_IMPL ++ int "Implementation index for Serial" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_ENET_IMPL ++ int "Implementation index for Ethernet" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_USB_IMPL ++ int "Implementation index for USB" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_WLAN_IMPL ++ int "Implementation index for WIRELESS" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_ATMAPI_IMPL ++ int "Implementation index for ATM" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_ATMTEST_IMPL ++ int "Implementation index for ATM Diagnostic" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_BLAA_IMPL ++ int "Implementation index for BLAA" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_ADSL_IMPL ++ int "Implementation index for ADSL" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_ENDPOINT_IMPL ++ int "Implementation index for VOICE" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_PROCFS_IMPL ++ int "Implementation index for PROCFS" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_VDSL_IMPL ++ int "Implementation index for VDSL" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_SECURITY_IMPL ++ int "Implementation index for SECURITY" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_HPNA_IMPL ++ int "Implementation index for HPNA" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ +diff -urN linux.old/arch/mips/bcm963xx/Makefile linux.dev/arch/mips/bcm963xx/Makefile +--- linux.old/arch/mips/bcm963xx/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm963xx/Makefile 2006-08-25 02:04:27.000000000 +0200 +@@ -0,0 +1,23 @@ ++# ++# Makefile for generic Broadcom MIPS boards ++# ++# Copyright (C) 2004 Broadcom Corporation ++# ++obj-y := irq.o prom.o setup.o time.o ser_init.o bcm63xx_led.o board.o boardparms.o int-handler.o ++ ++SRCBASE := $(TOPDIR) ++EXTRA_CFLAGS += -I$(SRCBASE)/include ++#EXTRA_CFLAGS += -I$(INC_ADSLDRV_PATH) -DDBG ++EXTRA_CFLAGS += -I$(INC_ADSLDRV_PATH) ++ ++ ++ifeq "$(ADSL)" "ANNEX_B" ++EXTRA_CFLAGS += -DADSL_ANNEXB ++endif ++ifeq "$(ADSL)" "SADSL" ++EXTRA_CFLAGS += -DADSL_SADSL ++endif ++ifeq "$(ADSL)" "ANNEX_C" ++EXTRA_CFLAGS += -DADSL_ANNEXC ++endif ++ +diff -urN linux.old/arch/mips/bcm963xx/prom.c linux.dev/arch/mips/bcm963xx/prom.c +--- linux.old/arch/mips/bcm963xx/prom.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm963xx/prom.c 2006-08-25 01:49:57.000000000 +0200 +@@ -0,0 +1,128 @@ ++/* ++<:copyright-gpl ++ Copyright 2004 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++/* ++ * prom.c: PROM library initialization code. ++ * ++ */ ++#include <linux/init.h> ++#include <linux/mm.h> ++#include <linux/sched.h> ++#include <linux/bootmem.h> ++#include <linux/blkdev.h> ++#include <asm/addrspace.h> ++#include <asm/bootinfo.h> ++#include <asm/cpu.h> ++#include <asm/time.h> ++ ++#include <bcm_map_part.h> ++#include <board.h> ++#include "boardparms.h" ++#include "softdsl/AdslCoreDefs.h" ++ ++ ++//char arcs_cmdline[CL_SIZE] __initdata = {0}; ++/* inv_xde */ ++int boot_loader_type; ++ ++extern int do_syslog(int, char *, int); ++extern void serial_init(void); ++extern void __init InitNvramInfo( void ); ++extern void kerSysFlashInit( void ); ++extern unsigned long get_nvram_start_addr(void); ++void __init create_root_nfs_cmdline( char *cmdline ); ++ ++#define MACH_BCM MACH_BCM96348 ++ ++const char *get_system_type(void) ++{ ++ /*PNVRAM_DATA pNvramData = (PNVRAM_DATA) get_nvram_start_addr(); ++ ++ return( pNvramData->szBoardId );*/ ++ return "brcm63xx"; ++} ++ ++unsigned long getMemorySize(void) ++{ ++ unsigned long ulSdramType = BOARD_SDRAM_TYPE; ++ ++ unsigned long ulSdramSize; ++ ++ switch( ulSdramType ) ++ { ++ case BP_MEMORY_16MB_1_CHIP: ++ case BP_MEMORY_16MB_2_CHIP: ++ ulSdramSize = 16 * 1024 * 1024; ++ break; ++ case BP_MEMORY_32MB_1_CHIP: ++ case BP_MEMORY_32MB_2_CHIP: ++ ulSdramSize = 32 * 1024 * 1024; ++ break; ++ case BP_MEMORY_64MB_2_CHIP: ++ ulSdramSize = 64 * 1024 * 1024; ++ break; ++ default: ++ ulSdramSize = 8 * 1024 * 1024; ++ break; ++ } ++ if (boot_loader_type == BOOT_CFE) ++ return ulSdramSize; ++ else ++ // assume that there is one contiguous memory map ++ return boot_mem_map.map[0].size; ++} ++ ++/* -------------------------------------------------------------------------- ++ Name: prom_init ++ -------------------------------------------------------------------------- */ ++void __init prom_init(void) ++{ ++ extern ulong r4k_interval; ++ ++ serial_init(); ++ ++ /* Need to fixup boot loader detection code ++ * whithout changing prom_init prototype ++ */ ++ ++ do_syslog(8, NULL, 8); ++ ++ printk( "%s prom init\n", get_system_type() ); ++ ++ PERF->IrqMask = 0; ++ ++ arcs_cmdline[0] = '\0'; ++ ++ if (boot_loader_type == BOOT_CFE) ++ add_memory_region(0, (getMemorySize() - ADSL_SDRAM_IMAGE_SIZE), BOOT_MEM_RAM); ++ else ++ add_memory_region(0, (0x01000000 - ADSL_SDRAM_IMAGE_SIZE), BOOT_MEM_RAM); ++ ++ mips_machgroup = MACH_GROUP_BRCM; ++ mips_machtype = MACH_BCM; ++} ++ ++/* -------------------------------------------------------------------------- ++ Name: prom_free_prom_memory ++Abstract: ++ -------------------------------------------------------------------------- */ ++void __init prom_free_prom_memory(void) ++{ ++ ++} ++ +diff -urN linux.old/arch/mips/bcm963xx/ser_init.c linux.dev/arch/mips/bcm963xx/ser_init.c +--- linux.old/arch/mips/bcm963xx/ser_init.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm963xx/ser_init.c 2006-08-25 00:39:38.000000000 +0200 +@@ -0,0 +1,180 @@ ++/* ++<:copyright-gpl ++ Copyright 2004 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++/* ++ * Broadcom bcm63xx serial port initialization, also prepare for printk ++ * by registering with console_init ++ * ++ */ ++ ++#include <linux/config.h> ++#include <linux/init.h> ++#include <linux/interrupt.h> ++#include <linux/kernel.h> ++#include <linux/types.h> ++#include <linux/console.h> ++#include <linux/sched.h> ++ ++#include <asm/addrspace.h> ++#include <asm/irq.h> ++#include <asm/reboot.h> ++#include <asm/gdb-stub.h> ++#include <asm/mc146818rtc.h> ++ ++#include <bcm_map_part.h> ++#include <board.h> ++ ++#define SER63XX_DEFAULT_BAUD 115200 ++#define BD_BCM63XX_TIMER_CLOCK_INPUT (FPERIPH) ++#define stUart ((volatile Uart * const) UART_BASE) ++ ++// Transmit interrupts ++#define TXINT (TXFIFOEMT | TXUNDERR | TXOVFERR) ++// Receive interrupts ++#define RXINT (RXFIFONE | RXOVFERR) ++ ++/* -------------------------------------------------------------------------- ++ Name: serial_init ++ Purpose: Initalize the UART ++-------------------------------------------------------------------------- */ ++void __init serial_init(void) ++{ ++ UINT32 tmpVal = SER63XX_DEFAULT_BAUD; ++ ULONG clockFreqHz; ++ ++#if defined(CONFIG_BCM96345) ++ // Make sure clock is ticking ++ PERF->blkEnables |= UART_CLK_EN; ++#endif ++ ++ /* Dissable channel's receiver and transmitter. */ ++ stUart->control &= ~(BRGEN|TXEN|RXEN); ++ ++ /*--------------------------------------------------------------------*/ ++ /* Write the table value to the clock select register. */ ++ /* DPullen - this is the equation to use: */ ++ /* value = clockFreqHz / baud / 32-1; */ ++ /* (snmod) Actually you should also take into account any necessary */ ++ /* rounding. Divide by 16, look at lsb, if 0, divide by 2 */ ++ /* and subtract 1. If 1, just divide by 2 */ ++ /*--------------------------------------------------------------------*/ ++ clockFreqHz = BD_BCM63XX_TIMER_CLOCK_INPUT; ++ tmpVal = (clockFreqHz / tmpVal) / 16; ++ if( tmpVal & 0x01 ) ++ tmpVal /= 2; //Rounding up, so sub is already accounted for ++ else ++ tmpVal = (tmpVal / 2) - 1; // Rounding down so we must sub 1 ++ stUart->baudword = tmpVal; ++ ++ /* Finally, re-enable the transmitter and receiver. */ ++ stUart->control |= (BRGEN|TXEN|RXEN); ++ ++ stUart->config = (BITS8SYM | ONESTOP); ++ // Set the FIFO interrupt depth ... stUart->fifocfg = 0xAA; ++ stUart->fifoctl = RSTTXFIFOS | RSTRXFIFOS; ++ stUart->intMask = 0; ++ stUart->intMask = RXINT | TXINT; ++} ++ ++ ++/* prom_putc() ++ * Output a character to the UART ++ */ ++void prom_putc(char c) ++{ ++ /* Wait for Tx uffer to empty */ ++ while (! (READ16(stUart->intStatus) & TXFIFOEMT)); ++ /* Send character */ ++ stUart->Data = c; ++} ++ ++/* prom_puts() ++ * Write a string to the UART ++ */ ++void prom_puts(const char *s) ++{ ++ while (*s) { ++ if (*s == '\n') { ++ prom_putc('\r'); ++ } ++ prom_putc(*s++); ++ } ++} ++ ++ ++/* prom_getc_nowait() ++ * Returns a character from the UART ++ * Returns -1 if no characters available or corrupted ++ */ ++int prom_getc_nowait(void) ++{ ++ uint16 uStatus; ++ int cData = -1; ++ ++ uStatus = READ16(stUart->intStatus); ++ ++ if (uStatus & RXFIFONE) { /* Do we have a character? */ ++ cData = READ16(stUart->Data) & 0xff; /* Read character */ ++ if (uStatus & (RXFRAMERR | RXPARERR)) { /* If we got an error, throw it away */ ++ cData = -1; ++ } ++ } ++ ++ return cData; ++} ++ ++/* prom_getc() ++ * Returns a charcter from the serial port ++ * Will block until it receives a valid character ++*/ ++char prom_getc(void) ++{ ++ int cData = -1; ++ ++ /* Loop until we get a valid character */ ++ while(cData == -1) { ++ cData = prom_getc_nowait(); ++ } ++ return (char) cData; ++} ++ ++/* prom_testc() ++ * Returns 0 if no characters available ++ */ ++int prom_testc(void) ++{ ++ uint16 uStatus; ++ ++ uStatus = READ16(stUart->intStatus); ++ ++ return (uStatus & RXFIFONE); ++} ++ ++#if defined (CONFIG_REMOTE_DEBUG) ++/* Prevent other code from writing to the serial port */ ++void _putc(char c) { } ++void _puts(const char *ptr) { } ++#else ++/* Low level outputs call prom routines */ ++void _putc(char c) { ++ prom_putc(c); ++} ++void _puts(const char *ptr) { ++ prom_puts(ptr); ++} ++#endif +diff -urN linux.old/arch/mips/bcm963xx/setup.c linux.dev/arch/mips/bcm963xx/setup.c +--- linux.old/arch/mips/bcm963xx/setup.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm963xx/setup.c 2006-08-25 02:26:58.000000000 +0200 +@@ -0,0 +1,525 @@ ++/* ++<:copyright-gpl ++ Copyright 2002 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++/* ++ * Generic setup routines for Broadcom 963xx MIPS boards ++ */ ++ ++#include <linux/config.h> ++#include <linux/init.h> ++#include <linux/interrupt.h> ++#include <linux/kernel.h> ++#include <linux/kdev_t.h> ++#include <linux/types.h> ++#include <linux/console.h> ++#include <linux/sched.h> ++#include <linux/mm.h> ++#include <linux/slab.h> ++#include <linux/module.h> ++#include <linux/pm.h> ++ ++#include <asm/addrspace.h> ++#include <asm/bcache.h> ++#include <asm/irq.h> ++#include <asm/time.h> ++#include <asm/reboot.h> ++#include <asm/gdb-stub.h> ++ ++extern void brcm_time_init(void); ++extern void brcm_timer_setup(struct irqaction *irq); ++extern unsigned long getMemorySize(void); ++ ++#if defined(CONFIG_BCM96348) && defined(CONFIG_PCI) ++#include <linux/pci.h> ++#include <linux/delay.h> ++#include <bcm_map_part.h> ++#include <bcmpci.h> ++ ++static volatile MpiRegisters * mpi = (MpiRegisters *)(MPI_BASE); ++#endif ++ ++/* This function should be in a board specific directory. For now, ++ * assume that all boards that include this file use a Broadcom chip ++ * with a soft reset bit in the PLL control register. ++ */ ++static void brcm_machine_restart(char *command) ++{ ++ const unsigned long ulSoftReset = 0x00000001; ++ unsigned long *pulPllCtrl = (unsigned long *) 0xfffe0008; ++ *pulPllCtrl |= ulSoftReset; ++} ++ ++static void brcm_machine_halt(void) ++{ ++ printk("System halted\n"); ++ while (1); ++} ++ ++#if defined(CONFIG_BCM96348) && defined(CONFIG_PCI) ++ ++static void mpi_SetLocalPciConfigReg(uint32 reg, uint32 value) ++{ ++ /* write index then value */ ++ mpi->pcicfgcntrl = PCI_CFG_REG_WRITE_EN + reg;; ++ mpi->pcicfgdata = value; ++} ++ ++static uint32 mpi_GetLocalPciConfigReg(uint32 reg) ++{ ++ /* write index then get value */ ++ mpi->pcicfgcntrl = PCI_CFG_REG_WRITE_EN + reg;; ++ return mpi->pcicfgdata; ++} ++ ++/* ++ * mpi_ResetPcCard: Set/Reset the PcCard ++ */ ++static void mpi_ResetPcCard(int cardtype, BOOL bReset) ++{ ++ if (cardtype == MPI_CARDTYPE_NONE) { ++ return; ++ } ++ ++ if (cardtype == MPI_CARDTYPE_CARDBUS) { ++ bReset = ! bReset; ++ } ++ ++ if (bReset) { ++ mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 & ~PCCARD_CARD_RESET); ++ } else { ++ mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 | PCCARD_CARD_RESET); ++ } ++} ++ ++/* ++ * mpi_ConfigCs: Configure an MPI/EBI chip select ++ */ ++static void mpi_ConfigCs(uint32 cs, uint32 base, uint32 size, uint32 flags) ++{ ++ mpi->cs[cs].base = ((base & 0x1FFFFFFF) | size); ++ mpi->cs[cs].config = flags; ++} ++ ++/* ++ * mpi_InitPcmciaSpace ++ */ ++static void mpi_InitPcmciaSpace(void) ++{ ++ // ChipSelect 4 controls PCMCIA Memory accesses ++ mpi_ConfigCs(PCMCIA_COMMON_BASE, pcmciaMem, EBI_SIZE_1M, (EBI_WORD_WIDE|EBI_ENABLE)); ++ // ChipSelect 5 controls PCMCIA Attribute accesses ++ mpi_ConfigCs(PCMCIA_ATTRIBUTE_BASE, pcmciaAttr, EBI_SIZE_1M, (EBI_WORD_WIDE|EBI_ENABLE)); ++ // ChipSelect 6 controls PCMCIA I/O accesses ++ mpi_ConfigCs(PCMCIA_IO_BASE, pcmciaIo, EBI_SIZE_64K, (EBI_WORD_WIDE|EBI_ENABLE)); ++ ++ mpi->pcmcia_cntl2 = ((PCMCIA_ATTR_ACTIVE << RW_ACTIVE_CNT_BIT) | ++ (PCMCIA_ATTR_INACTIVE << INACTIVE_CNT_BIT) | ++ (PCMCIA_ATTR_CE_SETUP << CE_SETUP_CNT_BIT) | ++ (PCMCIA_ATTR_CE_HOLD << CE_HOLD_CNT_BIT)); ++ ++ mpi->pcmcia_cntl2 |= (PCMCIA_HALFWORD_EN | PCMCIA_BYTESWAP_DIS); ++} ++ ++/* ++ * cardtype_vcc_detect: PC Card's card detect and voltage sense connection ++ * ++ * CD1#/ CD2#/ VS1#/ VS2#/ Card Initial Vcc ++ * CCD1# CCD2# CVS1 CVS2 Type ++ * ++ * GND GND open open 16-bit 5 vdc ++ * ++ * GND GND GND open 16-bit 3.3 vdc ++ * ++ * GND GND open GND 16-bit x.x vdc ++ * ++ * GND GND GND GND 16-bit 3.3 & x.x vdc ++ * ++ *==================================================================== ++ * ++ * CVS1 GND CCD1# open CardBus 3.3 vdc ++ * ++ * GND CVS2 open CCD2# CardBus x.x vdc ++ * ++ * GND CVS1 CCD2# open CardBus y.y vdc ++ * ++ * GND CVS2 GND CCD2# CardBus 3.3 & x.x vdc ++ * ++ * CVS2 GND open CCD1# CardBus x.x & y.y vdc ++ * ++ * GND CVS1 CCD2# open CardBus 3.3, x.x & y.y vdc ++ * ++ */ ++static int cardtype_vcc_detect(void) ++{ ++ uint32 data32; ++ int cardtype; ++ ++ cardtype = MPI_CARDTYPE_NONE; ++ mpi->pcmcia_cntl1 = 0x0000A000; // Turn on the output enables and drive ++ // the CVS pins to 0. ++ data32 = mpi->pcmcia_cntl1; ++ switch (data32 & 0x00000003) // Test CD1# and CD2#, see if card is plugged in. ++ { ++ case 0x00000003: // No Card is in the slot. ++ printk("mpi: No Card is in the PCMCIA slot\n"); ++ break; ++ ++ case 0x00000002: // Partial insertion, No CD2#. ++ printk("mpi: Card in the PCMCIA slot partial insertion, no CD2 signal\n"); ++ break; ++ ++ case 0x00000001: // Partial insertion, No CD1#. ++ printk("mpi: Card in the PCMCIA slot partial insertion, no CD1 signal\n"); ++ break; ++ ++ case 0x00000000: ++ mpi->pcmcia_cntl1 = 0x0000A0C0; // Turn off the CVS output enables and ++ // float the CVS pins. ++ mdelay(1); ++ data32 = mpi->pcmcia_cntl1; ++ // Read the Register. ++ switch (data32 & 0x0000000C) // See what is on the CVS pins. ++ { ++ case 0x00000000: // CVS1 and CVS2 are tied to ground, only 1 option. ++ printk("mpi: Detected 3.3 & x.x 16-bit PCMCIA card\n"); ++ cardtype = MPI_CARDTYPE_PCMCIA; ++ break; ++ ++ case 0x00000004: // CVS1 is open or tied to CCD1/CCD2 and CVS2 is tied to ground. ++ // 2 valid voltage options. ++ switch (data32 & 0x00000003) // Test the values of CCD1 and CCD2. ++ { ++ case 0x00000003: // CCD1 and CCD2 are tied to 1 of the CVS pins. ++ // This is not a valid combination. ++ printk("mpi: Unknown card plugged into slot\n"); ++ break; ++ ++ case 0x00000002: // CCD2 is tied to either CVS1 or CVS2. ++ mpi->pcmcia_cntl1 = 0x0000A080; // Drive CVS1 to a 0. ++ mdelay(1); ++ data32 = mpi->pcmcia_cntl1; ++ if (data32 & 0x00000002) { // CCD2 is tied to CVS2, not valid. ++ printk("mpi: Unknown card plugged into slot\n"); ++ } else { // CCD2 is tied to CVS1. ++ printk("mpi: Detected 3.3, x.x and y.y Cardbus card\n"); ++ cardtype = MPI_CARDTYPE_CARDBUS; ++ } ++ break; ++ ++ case 0x00000001: // CCD1 is tied to either CVS1 or CVS2. ++ // This is not a valid combination. ++ printk("mpi: Unknown card plugged into slot\n"); ++ break; ++ ++ case 0x00000000: // CCD1 and CCD2 are tied to ground. ++ printk("mpi: Detected x.x vdc 16-bit PCMCIA card\n"); ++ cardtype = MPI_CARDTYPE_PCMCIA; ++ break; ++ } ++ break; ++ ++ case 0x00000008: // CVS2 is open or tied to CCD1/CCD2 and CVS1 is tied to ground. ++ // 2 valid voltage options. ++ switch (data32 & 0x00000003) // Test the values of CCD1 and CCD2. ++ { ++ case 0x00000003: // CCD1 and CCD2 are tied to 1 of the CVS pins. ++ // This is not a valid combination. ++ printk("mpi: Unknown card plugged into slot\n"); ++ break; ++ ++ case 0x00000002: // CCD2 is tied to either CVS1 or CVS2. ++ mpi->pcmcia_cntl1 = 0x0000A040; // Drive CVS2 to a 0. ++ mdelay(1); ++ data32 = mpi->pcmcia_cntl1; ++ if (data32 & 0x00000002) { // CCD2 is tied to CVS1, not valid. ++ printk("mpi: Unknown card plugged into slot\n"); ++ } else {// CCD2 is tied to CVS2. ++ printk("mpi: Detected 3.3 and x.x Cardbus card\n"); ++ cardtype = MPI_CARDTYPE_CARDBUS; ++ } ++ break; ++ ++ case 0x00000001: // CCD1 is tied to either CVS1 or CVS2. ++ // This is not a valid combination. ++ printk("mpi: Unknown card plugged into slot\n"); ++ break; ++ ++ case 0x00000000: // CCD1 and CCD2 are tied to ground. ++ cardtype = MPI_CARDTYPE_PCMCIA; ++ printk("mpi: Detected 3.3 vdc 16-bit PCMCIA card\n"); ++ break; ++ } ++ break; ++ ++ case 0x0000000C: // CVS1 and CVS2 are open or tied to CCD1/CCD2. ++ // 5 valid voltage options. ++ ++ switch (data32 & 0x00000003) // Test the values of CCD1 and CCD2. ++ { ++ case 0x00000003: // CCD1 and CCD2 are tied to 1 of the CVS pins. ++ // This is not a valid combination. ++ printk("mpi: Unknown card plugged into slot\n"); ++ break; ++ ++ case 0x00000002: // CCD2 is tied to either CVS1 or CVS2. ++ // CCD1 is tied to ground. ++ mpi->pcmcia_cntl1 = 0x0000A040; // Drive CVS2 to a 0. ++ mdelay(1); ++ data32 = mpi->pcmcia_cntl1; ++ if (data32 & 0x00000002) { // CCD2 is tied to CVS1. ++ printk("mpi: Detected y.y vdc Cardbus card\n"); ++ } else { // CCD2 is tied to CVS2. ++ printk("mpi: Detected x.x vdc Cardbus card\n"); ++ } ++ cardtype = MPI_CARDTYPE_CARDBUS; ++ break; ++ ++ case 0x00000001: // CCD1 is tied to either CVS1 or CVS2. ++ // CCD2 is tied to ground. ++ ++ mpi->pcmcia_cntl1 = 0x0000A040; // Drive CVS2 to a 0. ++ mdelay(1); ++ data32 = mpi->pcmcia_cntl1; ++ if (data32 & 0x00000001) {// CCD1 is tied to CVS1. ++ printk("mpi: Detected 3.3 vdc Cardbus card\n"); ++ } else { // CCD1 is tied to CVS2. ++ printk("mpi: Detected x.x and y.y Cardbus card\n"); ++ } ++ cardtype = MPI_CARDTYPE_CARDBUS; ++ break; ++ ++ case 0x00000000: // CCD1 and CCD2 are tied to ground. ++ cardtype = MPI_CARDTYPE_PCMCIA; ++ printk("mpi: Detected 5 vdc 16-bit PCMCIA card\n"); ++ break; ++ } ++ break; ++ ++ default: ++ printk("mpi: Unknown card plugged into slot\n"); ++ break; ++ ++ } ++ } ++ return cardtype; ++} ++ ++/* ++ * mpi_DetectPcCard: Detect the plugged in PC-Card ++ * Return: < 0 => Unknown card detected ++ * 0 => No card detected ++ * 1 => 16-bit card detected ++ * 2 => 32-bit CardBus card detected ++ */ ++static int mpi_DetectPcCard(void) ++{ ++ int cardtype; ++ ++ cardtype = cardtype_vcc_detect(); ++ switch(cardtype) { ++ case MPI_CARDTYPE_PCMCIA: ++ mpi->pcmcia_cntl1 &= ~0x0000e000; // disable enable bits ++ //mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 & ~PCCARD_CARD_RESET); ++ mpi->pcmcia_cntl1 |= (PCMCIA_ENABLE | PCMCIA_GPIO_ENABLE); ++ mpi_InitPcmciaSpace(); ++ mpi_ResetPcCard(cardtype, FALSE); ++ // Hold card in reset for 10ms ++ mdelay(10); ++ mpi_ResetPcCard(cardtype, TRUE); ++ // Let card come out of reset ++ mdelay(100); ++ break; ++ case MPI_CARDTYPE_CARDBUS: ++ // 8 => CardBus Enable ++ // 1 => PCI Slot Number ++ // C => Float VS1 & VS2 ++ mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 & 0xFFFF0000) | ++ CARDBUS_ENABLE | ++ (CARDBUS_SLOT << 8)| ++ VS2_OEN | ++ VS1_OEN; ++ /* access to this memory window will be to/from CardBus */ ++ mpi->l2pmremap1 |= CARDBUS_MEM; ++ ++ // Need to reset the Cardbus Card. There's no CardManager to do this, ++ // and we need to be ready for PCI configuration. ++ mpi_ResetPcCard(cardtype, FALSE); ++ // Hold card in reset for 10ms ++ mdelay(10); ++ mpi_ResetPcCard(cardtype, TRUE); ++ // Let card come out of reset ++ mdelay(100); ++ break; ++ default: ++ break; ++ } ++ return cardtype; ++} ++ ++static int mpi_init(void) ++{ ++ unsigned long data; ++ unsigned int chipid; ++ unsigned int chiprev; ++ unsigned int sdramsize; ++ ++ chipid = (PERF->RevID & 0xFFFF0000) >> 16; ++ chiprev = (PERF->RevID & 0xFF); ++ sdramsize = getMemorySize(); ++ /* ++ * Init the pci interface ++ */ ++ data = GPIO->GPIOMode; // GPIO mode register ++ data |= GROUP2_PCI | GROUP1_MII_PCCARD; // PCI internal arbiter + Cardbus ++ GPIO->GPIOMode = data; // PCI internal arbiter ++ ++ /* ++ * In the BCM6348 CardBus support is defaulted to Slot 0 ++ * because there is no external IDSEL for CardBus. To disable ++ * the CardBus and allow a standard PCI card in Slot 0 ++ * set the cbus_idsel field to 0x1f. ++ */ ++ /* ++ uData = mpi->pcmcia_cntl1; ++ uData |= CARDBUS_IDSEL; ++ mpi->pcmcia_cntl1 = uData; ++ */ ++ // Setup PCI I/O Window range. Give 64K to PCI I/O ++ mpi->l2piorange = ~(BCM_PCI_IO_SIZE_64KB-1); ++ // UBUS to PCI I/O base address ++ mpi->l2piobase = BCM_PCI_IO_BASE & BCM_PCI_ADDR_MASK; ++ // UBUS to PCI I/O Window remap ++ mpi->l2pioremap = (BCM_PCI_IO_BASE | MEM_WINDOW_EN); ++ ++ // enable PCI related GPIO pins and data swap between system and PCI bus ++ mpi->locbuscntrl = (EN_PCI_GPIO | DIR_U2P_NOSWAP); ++ ++ /* Enable 6348 BusMaster and Memory access mode */ ++ data = mpi_GetLocalPciConfigReg(PCI_COMMAND); ++ data |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); ++ mpi_SetLocalPciConfigReg(PCI_COMMAND, data); ++ ++ /* Configure two 16 MByte PCI to System memory regions. */ ++ /* These memory regions are used when PCI device is a bus master */ ++ /* Accesses to the SDRAM from PCI bus will be "byte swapped" for this region */ ++ mpi_SetLocalPciConfigReg(PCI_BASE_ADDRESS_3, BCM_HOST_MEM_SPACE1); ++ mpi->sp0remap = 0x0; ++ ++ /* Accesses to the SDRAM from PCI bus will not be "byte swapped" for this region */ ++ mpi_SetLocalPciConfigReg(PCI_BASE_ADDRESS_4, BCM_HOST_MEM_SPACE2); ++ mpi->sp1remap = 0x0; ++ mpi->pcimodesel |= (PCI_BAR2_NOSWAP | 0x40); ++ ++ if ((chipid == 0x6348) && (chiprev == 0xb0)) { ++ mpi->sp0range = ~(sdramsize-1); ++ mpi->sp1range = ~(sdramsize-1); ++ } ++ /* ++ * Change 6348 PCI Cfg Reg. offset 0x40 to PCI memory read retry count infinity ++ * by set 0 in bit 8~15. This resolve read Bcm4306 srom return 0xffff in ++ * first read. ++ */ ++ data = mpi_GetLocalPciConfigReg(BRCM_PCI_CONFIG_TIMER); ++ data &= ~BRCM_PCI_CONFIG_TIMER_RETRY_MASK; ++ data |= 0x00000080; ++ mpi_SetLocalPciConfigReg(BRCM_PCI_CONFIG_TIMER, data); ++ ++ /* enable pci interrupt */ ++ mpi->locintstat |= (EXT_PCI_INT << 16); ++ ++ mpi_DetectPcCard(); ++ ++ ioport_resource.start = BCM_PCI_IO_BASE; ++ ioport_resource.end = BCM_PCI_IO_BASE + BCM_PCI_IO_SIZE_64KB; ++ ++#if defined(CONFIG_USB) ++ PERF->blkEnables |= USBH_CLK_EN; ++ mdelay(100); ++ *USBH_NON_OHCI = NON_OHCI_BYTE_SWAP; ++#endif ++ ++ return 0; ++} ++#endif ++ ++static int __init brcm63xx_setup(void) ++{ ++ extern int panic_timeout; ++ ++ _machine_restart = brcm_machine_restart; ++ _machine_halt = brcm_machine_halt; ++ pm_power_off = brcm_machine_halt; ++ ++ board_time_init = brcm_time_init; ++ board_timer_setup = brcm_timer_setup; ++ ++ panic_timeout = 5; ++ ++#if defined(CONFIG_BCM96348) && defined(CONFIG_PCI) ++ /* mpi initialization */ ++ mpi_init(); ++#endif ++ return 0; ++} ++ ++void plat_setup(void) ++{ ++ brcm63xx_setup(); ++} ++ ++/*************************************************************************** ++ * C++ New and delete operator functions ++ ***************************************************************************/ ++ ++/* void *operator new(unsigned int sz) */ ++void *_Znwj(unsigned int sz) ++{ ++ return( kmalloc(sz, GFP_KERNEL) ); ++} ++ ++/* void *operator new[](unsigned int sz)*/ ++void *_Znaj(unsigned int sz) ++{ ++ return( kmalloc(sz, GFP_KERNEL) ); ++} ++ ++/* placement new operator */ ++/* void *operator new (unsigned int size, void *ptr) */ ++void *ZnwjPv(unsigned int size, void *ptr) ++{ ++ return ptr; ++} ++ ++/* void operator delete(void *m) */ ++void _ZdlPv(void *m) ++{ ++ kfree(m); ++} ++ ++/* void operator delete[](void *m) */ ++void _ZdaPv(void *m) ++{ ++ kfree(m); ++} ++ ++EXPORT_SYMBOL(_Znwj); ++EXPORT_SYMBOL(_Znaj); ++EXPORT_SYMBOL(ZnwjPv); ++EXPORT_SYMBOL(_ZdlPv); ++EXPORT_SYMBOL(_ZdaPv); ++ +diff -urN linux.old/arch/mips/bcm963xx/softdsl/AdslCoreDefs.h linux.dev/arch/mips/bcm963xx/softdsl/AdslCoreDefs.h +--- linux.old/arch/mips/bcm963xx/softdsl/AdslCoreDefs.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm963xx/softdsl/AdslCoreDefs.h 2006-08-25 00:39:38.000000000 +0200 +@@ -0,0 +1,2 @@ ++#define ADSL_SDRAM_IMAGE_SIZE (384*1024) ++ +diff -urN linux.old/arch/mips/bcm963xx/time.c linux.dev/arch/mips/bcm963xx/time.c +--- linux.old/arch/mips/bcm963xx/time.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm963xx/time.c 2006-08-25 03:58:22.000000000 +0200 +@@ -0,0 +1,114 @@ ++/* ++<:copyright-gpl ++ Copyright 2004 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++/* ++ * Setup time for Broadcom 963xx MIPS boards ++ */ ++ ++#include <linux/config.h> ++#include <linux/init.h> ++#include <linux/kernel_stat.h> ++#include <linux/sched.h> ++#include <linux/spinlock.h> ++#include <linux/interrupt.h> ++#include <linux/module.h> ++#include <linux/time.h> ++#include <linux/timex.h> ++ ++#include <asm/mipsregs.h> ++#include <asm/ptrace.h> ++#include <asm/div64.h> ++#include <asm/time.h> ++ ++#include <bcm_map_part.h> ++#include <bcm_intr.h> ++ ++static unsigned long r4k_offset; /* Amount to increment compare reg each time */ ++static unsigned long r4k_cur; /* What counter should be at next timer irq */ ++ ++/* ********************************************************************* ++ * calculateCpuSpeed() ++ * Calculate the BCM6348 CPU speed by reading the PLL strap register ++ * and applying the following formula: ++ * cpu_clk = (.25 * 64MHz freq) * (N1 + 1) * (N2 + 2) / (M1_CPU + 1) ++ * Input parameters: ++ * none ++ * Return value: ++ * none ++ ********************************************************************* */ ++ ++static inline unsigned long __init calculateCpuSpeed(void) ++{ ++ UINT32 pllStrap = PERF->PllStrap; ++ int n1 = (pllStrap & PLL_N1_MASK) >> PLL_N1_SHFT; ++ int n2 = (pllStrap & PLL_N2_MASK) >> PLL_N2_SHFT; ++ int m1cpu = (pllStrap & PLL_M1_CPU_MASK) >> PLL_M1_CPU_SHFT; ++ ++ return (16 * (n1 + 1) * (n2 + 2) / (m1cpu + 1)) * 1000000; ++} ++ ++ ++static inline unsigned long __init cal_r4koff(void) ++{ ++ mips_hpt_frequency = calculateCpuSpeed() / 2; ++ return (mips_hpt_frequency / HZ); ++} ++ ++ ++/* ++ * There are a lot of conceptually broken versions of the MIPS timer interrupt ++ * handler floating around. This one is rather different, but the algorithm ++ * is provably more robust. ++ */ ++irqreturn_t brcm_timer_interrupt(struct pt_regs *regs) ++{ ++ int irq = MIPS_TIMER_INT; ++ ++ irq_enter(); ++ kstat_this_cpu.irqs[irq]++; ++ ++ timer_interrupt(irq, NULL, regs); ++ irq_exit(); ++ return IRQ_HANDLED; ++} ++ ++ ++void __init brcm_time_init(void) ++{ ++ unsigned int est_freq, flags; ++ local_irq_save(flags); ++ ++ printk("calculating r4koff... "); ++ r4k_offset = cal_r4koff(); ++ printk("%08lx(%d)\n", r4k_offset, (int)r4k_offset); ++ ++ est_freq = 2 * r4k_offset * HZ; ++ est_freq += 5000; /* round */ ++ est_freq -= est_freq % 10000; ++ printk("CPU frequency %d.%02d MHz\n", est_freq / 1000000, ++ (est_freq % 1000000) * 100 / 1000000); ++ local_irq_restore(flags); ++} ++ ++ ++void __init brcm_timer_setup(struct irqaction *irq) ++{ ++ r4k_cur = (read_c0_count() + r4k_offset); ++ write_c0_compare(r4k_cur); ++ set_c0_status(IE_IRQ5); ++} +diff -urN linux.old/arch/mips/Kconfig linux.dev/arch/mips/Kconfig +--- linux.old/arch/mips/Kconfig 2006-08-25 00:43:39.000000000 +0200 ++++ linux.dev/arch/mips/Kconfig 2006-08-25 01:57:46.000000000 +0200 +@@ -12,6 +12,15 @@ + prompt "System type" + default SGI_IP22 + ++config MIPS_BRCM ++ bool "Support for the Broadcom boards" ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_HAS_CPU_MIPS32_R1 ++ select IRQ_CPU ++ help ++ This is a fmaily of boards based on the Broadcom MIPS32 ++ + config MIPS_MTX1 + bool "4G Systems MTX-1 board" + select DMA_NONCOHERENT +@@ -780,6 +789,7 @@ + + endchoice + ++source "arch/mips/bcm963xx/Kconfig" + source "arch/mips/ddb5xxx/Kconfig" + source "arch/mips/gt64120/ev64120/Kconfig" + source "arch/mips/jazz/Kconfig" +diff -urN linux.old/arch/mips/kernel/cpu-probe.c linux.dev/arch/mips/kernel/cpu-probe.c +--- linux.old/arch/mips/kernel/cpu-probe.c 2006-08-25 00:43:39.000000000 +0200 ++++ linux.dev/arch/mips/kernel/cpu-probe.c 2006-08-25 00:39:38.000000000 +0200 +@@ -568,6 +568,25 @@ + return; + } + ++static inline void cpu_probe_broadcom(struct cpuinfo_mips *c) ++{ ++ decode_configs(c); ++ switch (c->processor_id & 0xff00) { ++ case PRID_IMP_BCM6338: ++ c->cputype = CPU_BCM6338; ++ break; ++ case PRID_IMP_BCM6345: ++ c->cputype = CPU_BCM6345; ++ break; ++ case PRID_IMP_BCM6348: ++ c->cputype = CPU_BCM6348; ++ break; ++ default: ++ c->cputype = CPU_UNKNOWN; ++ break; ++ } ++} ++ + static inline void cpu_probe_mips(struct cpuinfo_mips *c) + { + decode_configs(c); +@@ -704,6 +723,9 @@ + case PRID_COMP_LEGACY: + cpu_probe_legacy(c); + break; ++ case PRID_COMP_BROADCOM: ++ cpu_probe_broadcom(c); ++ break; + case PRID_COMP_MIPS: + cpu_probe_mips(c); + break; +diff -urN linux.old/arch/mips/kernel/proc.c linux.dev/arch/mips/kernel/proc.c +--- linux.old/arch/mips/kernel/proc.c 2006-08-25 00:43:39.000000000 +0200 ++++ linux.dev/arch/mips/kernel/proc.c 2006-08-25 00:39:38.000000000 +0200 +@@ -85,6 +85,9 @@ + [CPU_VR4181A] = "NEC VR4181A", + [CPU_SR71000] = "Sandcraft SR71000", + [CPU_PR4450] = "Philips PR4450", ++ [CPU_BCM6338] = "BCM6338", ++ [CPU_BCM6345] = "BCM6345", ++ [CPU_BCM6348] = "BCM6348", + }; + + +diff -urN linux.old/arch/mips/Makefile linux.dev/arch/mips/Makefile +--- linux.old/arch/mips/Makefile 2006-08-25 00:43:39.000000000 +0200 ++++ linux.dev/arch/mips/Makefile 2006-08-25 11:36:41.000000000 +0200 +@@ -145,6 +145,19 @@ + # + + # ++# Broadcom board ++# ++core-$(CONFIG_MIPS_BRCM) += arch/mips/bcm963xx/ ++core-$(CONFIG_MIPS_BRCM) += bcmdrivers/opensource/char/serial/impl1/ ++#core-$(CONFIG_MIPS_BRCM) += bcmdrivers/opensource/char/board/bcm963xx/impl1/ ++#core-$(CONFIG_MIPS_BRCM) += boardparms/bcm963xx/ ++#cflags-$(CONFIG_MIPS_BRCM) += -Iinclude/asm-mips/mach-bcm963xx ++cflags-$(CONFIG_MIPS_BRCM) += -Iarch/mips/bcm963xx/include ++cflags-$(CONFIG_MIPS_BRCM) += -Iboardparms/bcm963xx ++load-$(CONFIG_MIPS_BRCM) += 0xffffffff80010000 ++ ++ ++# + # Acer PICA 61, Mips Magnum 4000 and Olivetti M700. + # + core-$(CONFIG_MACH_JAZZ) += arch/mips/jazz/ +diff -urN linux.old/arch/mips/mm/c-r4k.c linux.dev/arch/mips/mm/c-r4k.c +--- linux.old/arch/mips/mm/c-r4k.c 2006-08-25 00:43:39.000000000 +0200 ++++ linux.dev/arch/mips/mm/c-r4k.c 2006-08-25 00:39:38.000000000 +0200 +@@ -914,6 +914,13 @@ + if (!(config & MIPS_CONF_M)) + panic("Don't know how to probe P-caches on this cpu."); + ++ if (c->cputype == CPU_BCM6338 || c->cputype == CPU_BCM6345 || c->cputype == CPU_BCM6348) ++ { ++ printk("brcm mips: enabling icache and dcache...\n"); ++ /* Enable caches */ ++ write_c0_diag(read_c0_diag() | 0xC0000000); ++ } ++ + /* + * So we seem to be a MIPS32 or MIPS64 CPU + * So let's probe the I-cache ... +diff -urN linux.old/arch/mips/mm/tlbex.c linux.dev/arch/mips/mm/tlbex.c +--- linux.old/arch/mips/mm/tlbex.c 2006-08-25 00:43:39.000000000 +0200 ++++ linux.dev/arch/mips/mm/tlbex.c 2006-08-25 00:39:38.000000000 +0200 +@@ -882,6 +882,9 @@ + case CPU_4KSC: + case CPU_20KC: + case CPU_25KF: ++ case CPU_BCM6338: ++ case CPU_BCM6345: ++ case CPU_BCM6348: + tlbw(p); + break; + +diff -urN linux.old/arch/mips/pci/fixup-bcm96348.c linux.dev/arch/mips/pci/fixup-bcm96348.c +--- linux.old/arch/mips/pci/fixup-bcm96348.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/pci/fixup-bcm96348.c 2006-08-25 00:39:38.000000000 +0200 +@@ -0,0 +1,85 @@ ++/* ++<:copyright-gpl ++ Copyright 2002 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++#include <linux/init.h> ++#include <linux/types.h> ++#include <linux/pci.h> ++ ++#include <bcmpci.h> ++#include <bcm_intr.h> ++#include <bcm_map_part.h> ++ ++static volatile MpiRegisters * mpi = (MpiRegisters *)(MPI_BASE); ++ ++static char irq_tab_bcm96348[] __initdata = { ++ [0] = INTERRUPT_ID_MPI, ++ [1] = INTERRUPT_ID_MPI, ++#if defined(CONFIG_USB) ++ [USB_HOST_SLOT] = INTERRUPT_ID_USBH ++#endif ++}; ++ ++int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) ++{ ++ return irq_tab_bcm96348[slot]; ++} ++ ++static void bcm96348_fixup(struct pci_dev *dev) ++{ ++ uint32 memaddr; ++ uint32 size; ++ ++ memaddr = pci_resource_start(dev, 0); ++ size = pci_resource_len(dev, 0); ++ ++ switch (PCI_SLOT(dev->devfn)) { ++ case 0: ++ // UBUS to PCI address range ++ // Memory Window 1. Mask determines which bits are decoded. ++ mpi->l2pmrange1 = ~(size-1); ++ // UBUS to PCI Memory base address. This is akin to the ChipSelect base ++ // register. ++ mpi->l2pmbase1 = memaddr & BCM_PCI_ADDR_MASK; ++ // UBUS to PCI Remap Address. Replaces the masked address bits in the ++ // range register with this setting. ++ // Also, enable direct I/O and direct Memory accesses ++ mpi->l2pmremap1 = (memaddr | MEM_WINDOW_EN); ++ break; ++ ++ case 1: ++ // Memory Window 2 ++ mpi->l2pmrange2 = ~(size-1); ++ // UBUS to PCI Memory base address. ++ mpi->l2pmbase2 = memaddr & BCM_PCI_ADDR_MASK; ++ // UBUS to PCI Remap Address ++ mpi->l2pmremap2 = (memaddr | MEM_WINDOW_EN); ++ break; ++ ++#if defined(CONFIG_USB) ++ case USB_HOST_SLOT: ++ dev->resource[0].start = USB_HOST_BASE; ++ dev->resource[0].end = USB_HOST_BASE+USB_BAR0_MEM_SIZE-1; ++ break; ++#endif ++ } ++} ++ ++struct pci_fixup pcibios_fixups[] = { ++ { PCI_FIXUP_FINAL, PCI_ANY_ID, PCI_ANY_ID, bcm96348_fixup }, ++ {0} ++}; +diff -urN linux.old/arch/mips/pci/Makefile linux.dev/arch/mips/pci/Makefile +--- linux.old/arch/mips/pci/Makefile 2006-08-25 00:43:29.000000000 +0200 ++++ linux.dev/arch/mips/pci/Makefile 2006-08-25 00:39:38.000000000 +0200 +@@ -18,6 +18,7 @@ + obj-$(CONFIG_MIPS_TX3927) += ops-tx3927.o + obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o + obj-$(CONFIG_NEC_CMBVR4133) += fixup-vr4133.o ++obj-$(CONFIG_BCM_PCI) += fixup-bcm96348.o pci-bcm96348.o ops-bcm96348.o + + # + # These are still pretty much in the old state, watch, go blind. +diff -urN linux.old/arch/mips/pci/ops-bcm96348.c linux.dev/arch/mips/pci/ops-bcm96348.c +--- linux.old/arch/mips/pci/ops-bcm96348.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/pci/ops-bcm96348.c 2006-08-25 00:39:38.000000000 +0200 +@@ -0,0 +1,276 @@ ++/* ++<:copyright-gpl ++ Copyright 2002 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++#include <linux/types.h> ++#include <linux/pci.h> ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <asm/addrspace.h> ++ ++#include <bcm_intr.h> ++#include <bcm_map_part.h> ++#include <bcmpci.h> ++ ++#include <linux/delay.h> ++ ++#if defined(CONFIG_USB) ++#if 0 ++#define DPRINT(x...) printk(x) ++#else ++#define DPRINT(x...) ++#endif ++ ++static int ++pci63xx_int_read(unsigned int devfn, int where, u32 * value, int size); ++static int ++pci63xx_int_write(unsigned int devfn, int where, u32 * value, int size); ++ ++static bool usb_mem_size_rd = FALSE; ++static uint32 usb_mem_base = 0; ++static uint32 usb_cfg_space_cmd_reg = 0; ++#endif ++static bool pci_mem_size_rd = FALSE; ++ ++static volatile MpiRegisters * mpi = (MpiRegisters *)(MPI_BASE); ++ ++static void mpi_SetupPciConfigAccess(uint32 addr) ++{ ++ mpi->l2pcfgctl = (DIR_CFG_SEL | DIR_CFG_USEREG | addr) & ~CONFIG_TYPE; ++} ++ ++static void mpi_ClearPciConfigAccess(void) ++{ ++ mpi->l2pcfgctl = 0x00000000; ++} ++ ++#if defined(CONFIG_USB) ++/* -------------------------------------------------------------------------- ++ Name: pci63xx_int_write ++Abstract: PCI Config write on internal device(s) ++ -------------------------------------------------------------------------- */ ++static int ++pci63xx_int_write(unsigned int devfn, int where, u32 * value, int size) ++{ ++ if (PCI_SLOT(devfn) != USB_HOST_SLOT) { ++ return PCIBIOS_SUCCESSFUL; ++ } ++ ++ switch (size) { ++ case 1: ++ DPRINT("W => Slot: %d Where: %2X Len: %d Data: %02X\n", ++ PCI_SLOT(devfn), where, size, *value); ++ break; ++ case 2: ++ DPRINT("W => Slot: %d Where: %2X Len: %d Data: %04X\n", ++ PCI_SLOT(devfn), where, size, *value); ++ switch (where) { ++ case PCI_COMMAND: ++ usb_cfg_space_cmd_reg = *value; ++ break; ++ default: ++ break; ++ } ++ break; ++ case 4: ++ DPRINT("W => Slot: %d Where: %2X Len: %d Data: %08lX\n", ++ PCI_SLOT(devfn), where, size, *value); ++ switch (where) { ++ case PCI_BASE_ADDRESS_0: ++ if (*value == 0xffffffff) { ++ usb_mem_size_rd = TRUE; ++ } else { ++ usb_mem_base = *value; ++ } ++ break; ++ default: ++ break; ++ } ++ break; ++ default: ++ break; ++ } ++ ++ return PCIBIOS_SUCCESSFUL; ++} ++ ++/* -------------------------------------------------------------------------- ++ Name: pci63xx_int_read ++Abstract: PCI Config read on internal device(s) ++ -------------------------------------------------------------------------- */ ++static int ++pci63xx_int_read(unsigned int devfn, int where, u32 * value, int size) ++{ ++ uint32 retValue = 0xFFFFFFFF; ++ ++ if (PCI_SLOT(devfn) != USB_HOST_SLOT) { ++ return PCIBIOS_SUCCESSFUL; ++ } ++ ++ // For now, this is specific to the USB Host controller. We can ++ // make it more general if we have to... ++ // Emulate PCI Config accesses ++ switch (where) { ++ case PCI_VENDOR_ID: ++ case PCI_DEVICE_ID: ++ retValue = PCI_VENDOR_ID_BROADCOM | 0x63000000; ++ break; ++ case PCI_COMMAND: ++ case PCI_STATUS: ++ retValue = (0x0006 << 16) | usb_cfg_space_cmd_reg; ++ break; ++ case PCI_CLASS_REVISION: ++ case PCI_CLASS_DEVICE: ++ retValue = (PCI_CLASS_SERIAL_USB << 16) | (0x10 << 8) | 0x01; ++ break; ++ case PCI_BASE_ADDRESS_0: ++ if (usb_mem_size_rd) { ++ retValue = USB_BAR0_MEM_SIZE; ++ } else { ++ if (usb_mem_base != 0) ++ retValue = usb_mem_base; ++ else ++ retValue = USB_HOST_BASE; ++ } ++ usb_mem_size_rd = FALSE; ++ break; ++ case PCI_CACHE_LINE_SIZE: ++ case PCI_LATENCY_TIMER: ++ retValue = 0; ++ break; ++ case PCI_HEADER_TYPE: ++ retValue = PCI_HEADER_TYPE_NORMAL; ++ break; ++ case PCI_SUBSYSTEM_VENDOR_ID: ++ retValue = PCI_VENDOR_ID_BROADCOM; ++ break; ++ case PCI_SUBSYSTEM_ID: ++ retValue = 0x6300; ++ break; ++ case PCI_INTERRUPT_LINE: ++ retValue = INTERRUPT_ID_USBH; ++ break; ++ default: ++ break; ++ } ++ ++ switch (size) { ++ case 1: ++ *value = (retValue >> ((where & 3) << 3)) & 0xff; ++ DPRINT("R <= Slot: %d Where: %2X Len: %d Data: %02X\n", ++ PCI_SLOT(devfn), where, size, *value); ++ break; ++ case 2: ++ *value = (retValue >> ((where & 3) << 3)) & 0xffff; ++ DPRINT("R <= Slot: %d Where: %2X Len: %d Data: %04X\n", ++ PCI_SLOT(devfn), where, size, *value); ++ break; ++ case 4: ++ *value = retValue; ++ DPRINT("R <= Slot: %d Where: %2X Len: %d Data: %08lX\n", ++ PCI_SLOT(devfn), where, size, *value); ++ break; ++ default: ++ break; ++ } ++ ++ return PCIBIOS_SUCCESSFUL; ++} ++#endif ++ ++static int bcm96348_pcibios_read(struct pci_bus *bus, unsigned int devfn, ++ int where, int size, u32 * val) ++{ ++ volatile unsigned char *ioBase = (unsigned char *)(mpi->l2piobase | KSEG1); ++ uint32 data; ++ ++#if defined(CONFIG_USB) ++ if (PCI_SLOT(devfn) == USB_HOST_SLOT) ++ return pci63xx_int_read(devfn, where, val, size); ++#endif ++ ++ mpi_SetupPciConfigAccess(BCM_PCI_CFG(PCI_SLOT(devfn), PCI_FUNC(devfn), where)); ++ data = *(uint32 *)ioBase; ++ switch(size) { ++ case 1: ++ *val = (data >> ((where & 3) << 3)) & 0xff; ++ break; ++ case 2: ++ *val = (data >> ((where & 3) << 3)) & 0xffff; ++ break; ++ case 4: ++ *val = data; ++ /* Special case for reading PCI device range */ ++ if ((where >= PCI_BASE_ADDRESS_0) && (where <= PCI_BASE_ADDRESS_5)) { ++ if (pci_mem_size_rd) { ++ /* bcm6348 PCI memory window minimum size is 64K */ ++ *val &= PCI_SIZE_64K; ++ } ++ } ++ break; ++ default: ++ break; ++ } ++ pci_mem_size_rd = FALSE; ++ mpi_ClearPciConfigAccess(); ++ ++ return PCIBIOS_SUCCESSFUL; ++} ++ ++static int bcm96348_pcibios_write(struct pci_bus *bus, unsigned int devfn, ++ int where, int size, u32 val) ++{ ++ volatile unsigned char *ioBase = (unsigned char *)(mpi->l2piobase | KSEG1); ++ uint32 data; ++ ++#if defined(CONFIG_USB) ++ if (PCI_SLOT(devfn) == USB_HOST_SLOT) ++ return pci63xx_int_write(devfn, where, &val, size); ++#endif ++ mpi_SetupPciConfigAccess(BCM_PCI_CFG(PCI_SLOT(devfn), PCI_FUNC(devfn), where)); ++ data = *(uint32 *)ioBase; ++ switch(size) { ++ case 1: ++ data = (data & ~(0xff << ((where & 3) << 3))) | ++ (val << ((where & 3) << 3)); ++ break; ++ case 2: ++ data = (data & ~(0xffff << ((where & 3) << 3))) | ++ (val << ((where & 3) << 3)); ++ break; ++ case 4: ++ data = val; ++ /* Special case for reading PCI device range */ ++ if ((where >= PCI_BASE_ADDRESS_0) && (where <= PCI_BASE_ADDRESS_5)) { ++ if (val == 0xffffffff) ++ pci_mem_size_rd = TRUE; ++ } ++ break; ++ default: ++ break; ++ } ++ *(uint32 *)ioBase = data; ++ udelay(500); ++ mpi_ClearPciConfigAccess(); ++ ++ return PCIBIOS_SUCCESSFUL; ++} ++ ++struct pci_ops bcm96348_pci_ops = { ++ .read = bcm96348_pcibios_read, ++ .write = bcm96348_pcibios_write ++}; +diff -urN linux.old/arch/mips/pci/pci-bcm96348.c linux.dev/arch/mips/pci/pci-bcm96348.c +--- linux.old/arch/mips/pci/pci-bcm96348.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/pci/pci-bcm96348.c 2006-08-25 00:39:38.000000000 +0200 +@@ -0,0 +1,54 @@ ++/* ++<:copyright-gpl ++ Copyright 2002 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++#include <linux/types.h> ++#include <linux/pci.h> ++#include <linux/kernel.h> ++#include <linux/init.h> ++ ++#include <asm/pci_channel.h> ++#include <bcmpci.h> ++ ++static struct resource bcm_pci_io_resource = { ++ .name = "bcm96348 pci IO space", ++ .start = BCM_PCI_IO_BASE, ++ .end = BCM_PCI_IO_BASE + BCM_PCI_IO_SIZE_64KB - 1, ++ .flags = IORESOURCE_IO ++}; ++ ++static struct resource bcm_pci_mem_resource = { ++ .name = "bcm96348 pci memory space", ++ .start = BCM_PCI_MEM_BASE, ++ .end = BCM_PCI_MEM_BASE + BCM_PCI_MEM_SIZE_16MB - 1, ++ .flags = IORESOURCE_MEM ++}; ++ ++extern struct pci_ops bcm96348_pci_ops; ++ ++struct pci_controller bcm96348_controller = { ++ .pci_ops = &bcm96348_pci_ops, ++ .io_resource = &bcm_pci_io_resource, ++ .mem_resource = &bcm_pci_mem_resource, ++}; ++ ++static void bcm96348_pci_init(void) ++{ ++ register_pci_controller(&bcm96348_controller); ++} ++ ++arch_initcall(bcm96348_pci_init); +diff -urN linux.old/bcmdrivers/opensource/char/serial/impl1/bcm63xx_cons.c linux.dev/bcmdrivers/opensource/char/serial/impl1/bcm63xx_cons.c +--- linux.old/bcmdrivers/opensource/char/serial/impl1/bcm63xx_cons.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/bcmdrivers/opensource/char/serial/impl1/bcm63xx_cons.c 2006-08-25 00:39:38.000000000 +0200 +@@ -0,0 +1,1056 @@ ++/* ++<:copyright-gpl ++ Copyright 2002 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++ ++/* Description: Serial port driver for the BCM963XX. */ ++ ++#define CARDNAME "bcm963xx_serial driver" ++#define VERSION "2.0" ++#define VER_STR CARDNAME " v" VERSION "\n" ++ ++ ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/version.h> ++#include <linux/init.h> ++#include <linux/slab.h> ++#include <linux/interrupt.h> ++#include <linux/spinlock.h> ++ ++/* for definition of struct console */ ++#include <linux/console.h> ++#include <linux/tty.h> ++#include <linux/tty_flip.h> ++#include <linux/serial.h> ++#include <asm/uaccess.h> ++ ++#include <bcmtypes.h> ++#include <board.h> ++#include <bcm_map_part.h> ++#include <bcm_intr.h> ++ ++static DEFINE_SPINLOCK(bcm963xx_serial_lock); ++ ++extern void _putc(char); ++extern void _puts(const char *); ++ ++typedef struct bcm_serial { ++ volatile Uart * port; ++ int type; ++ int flags; ++ int irq; ++ int baud_base; ++ int blocked_open; ++ unsigned short close_delay; ++ unsigned short closing_wait; ++ unsigned short line; /* port/line number */ ++ unsigned short cflags; /* line configuration flag */ ++ unsigned short x_char; /* xon/xoff character */ ++ unsigned short read_status_mask; /* mask for read condition */ ++ unsigned short ignore_status_mask; /* mask for ignore condition */ ++ unsigned long event; /* mask used in BH */ ++ int xmit_head; /* Position of the head */ ++ int xmit_tail; /* Position of the tail */ ++ int xmit_cnt; /* Count of the chars in the buffer */ ++ int count; /* indicates how many times it has been opened */ ++ int magic; ++ ++ struct async_icount icount; /* keep track of things ... */ ++ struct tty_struct *tty; /* tty associated */ ++ struct termios normal_termios; ++ ++ wait_queue_head_t open_wait; ++ wait_queue_head_t close_wait; ++ ++ long session; /* Session of opening process */ ++ long pgrp; /* pgrp of opening process */ ++ ++ unsigned char is_initialized; ++} Context; ++ ++ ++/*---------------------------------------------------------------------*/ ++/* Define bits in the Interrupt Enable register */ ++/*---------------------------------------------------------------------*/ ++/* Enable receive interrupt */ ++#define RXINT (RXFIFONE|RXOVFERR) ++ ++/* Enable transmit interrupt */ ++#define TXINT (TXFIFOEMT|TXUNDERR|TXOVFERR) ++ ++/* Enable receiver line status interrupt */ ++#define LSINT (RXBRK|RXPARERR|RXFRAMERR) ++ ++#define BCM_NUM_UARTS 1 ++ ++#define BD_BCM63XX_TIMER_CLOCK_INPUT (FPERIPH) ++ ++ ++static struct bcm_serial multi[BCM_NUM_UARTS]; ++static struct bcm_serial *lines[BCM_NUM_UARTS]; ++static struct tty_driver serial_driver; ++static struct tty_struct *serial_table[BCM_NUM_UARTS]; ++static struct termios *serial_termios[BCM_NUM_UARTS]; ++static struct termios *serial_termios_locked[BCM_NUM_UARTS]; ++static int serial_refcount; ++ ++ ++static void bcm_stop (struct tty_struct *tty); ++static void bcm_start (struct tty_struct *tty); ++static inline void receive_chars (struct bcm_serial * info); ++static int startup (struct bcm_serial *info); ++static void shutdown (struct bcm_serial * info); ++static void change_speed( volatile Uart *pUart, tcflag_t cFlag ); ++static void bcm63xx_cons_flush_chars (struct tty_struct *tty); ++static int bcm63xx_cons_write (struct tty_struct *tty, int from_user, ++ const unsigned char *buf, int count); ++static int bcm63xx_cons_write_room (struct tty_struct *tty); ++static int bcm_chars_in_buffer (struct tty_struct *tty); ++static void bcm_flush_buffer (struct tty_struct *tty); ++static void bcm_throttle (struct tty_struct *tty); ++static void bcm_unthrottle (struct tty_struct *tty); ++static void bcm_send_xchar (struct tty_struct *tty, char ch); ++static int get_serial_info(struct bcm_serial *info, struct serial_struct *retinfo); ++static int set_serial_info (struct bcm_serial *info, struct serial_struct *new_info); ++static int get_lsr_info (struct bcm_serial *info, unsigned int *value); ++static void send_break (struct bcm_serial *info, int duration); ++static int bcm_ioctl (struct tty_struct * tty, struct file * file, ++ unsigned int cmd, unsigned long arg); ++static void bcm_set_termios (struct tty_struct *tty, struct termios *old_termios); ++static void bcm63xx_cons_close (struct tty_struct *tty, struct file *filp); ++static void bcm_hangup (struct tty_struct *tty); ++static int block_til_ready (struct tty_struct *tty, struct file *filp, struct bcm_serial *info); ++static int bcm63xx_cons_open (struct tty_struct * tty, struct file * filp); ++static int __init bcm63xx_serialinit(void); ++ ++ ++/* ++ * ------------------------------------------------------------ ++ * rs_stop () and rs_start () ++ * ++ * These routines are called before setting or resetting ++ * tty->stopped. They enable or disable transmitter interrupts, ++ * as necessary. ++ * ------------------------------------------------------------ ++ */ ++static void bcm_stop (struct tty_struct *tty) ++{ ++} ++ ++static void bcm_start (struct tty_struct *tty) ++{ ++ _puts(CARDNAME " Start\n"); ++} ++ ++/* ++ * ------------------------------------------------------------ ++ * receive_char () ++ * ++ * This routine deals with inputs from any lines. ++ * ------------------------------------------------------------ ++ */ ++static inline void receive_chars (struct bcm_serial * info) ++{ ++ struct tty_struct *tty = 0; ++ struct async_icount * icount; ++ int ignore = 0; ++ unsigned short status, tmp; ++ UCHAR ch = 0; ++ while ((status = info->port->intStatus) & RXINT) ++ { ++ char flag_char = 0; ++ ++ if (status & RXFIFONE) ++ ch = info->port->Data; // Read the character ++ tty = info->tty; /* now tty points to the proper dev */ ++ icount = &info->icount; ++ if (! tty) ++ break; ++ if (!tty_buffer_request_room(tty, 1)) ++ break; ++ icount->rx++; ++ if (status & RXBRK) ++ { ++ flag_char = TTY_BREAK; ++ icount->brk++; ++ } ++ // keep track of the statistics ++ if (status & (RXFRAMERR | RXPARERR | RXOVFERR)) ++ { ++ if (status & RXPARERR) /* parity error */ ++ icount->parity++; ++ else ++ if (status & RXFRAMERR) /* frame error */ ++ icount->frame++; ++ if (status & RXOVFERR) ++ { ++ // Overflow. Reset the RX FIFO ++ info->port->fifoctl |= RSTRXFIFOS; ++ icount->overrun++; ++ } ++ // check to see if we should ignore the character ++ // and mask off conditions that should be ignored ++ if (status & info->ignore_status_mask) ++ { ++ if (++ignore > 100 ) ++ break; ++ goto ignore_char; ++ } ++ // Mask off the error conditions we want to ignore ++ tmp = status & info->read_status_mask; ++ if (tmp & RXPARERR) ++ { ++ flag_char = TTY_PARITY; ++ } ++ else ++ if (tmp & RXFRAMERR) ++ { ++ flag_char = TTY_FRAME; ++ } ++ if (tmp & RXOVFERR) ++ { ++ tty_insert_flip_char(tty, ch, flag_char); ++ ch = 0; ++ flag_char = TTY_OVERRUN; ++ if (!tty_buffer_request_room(tty, 1)) ++ break; ++ } ++ } ++ tty_insert_flip_char(tty, ch, flag_char); ++ } ++ignore_char: ++ if (tty) ++ tty_flip_buffer_push(tty); ++} ++ ++ ++/* ++ * ------------------------------------------------------------ ++ * bcm_interrupt () ++ * ++ * this is the main interrupt routine for the chip. ++ * It deals with the multiple ports. ++ * ------------------------------------------------------------ ++ */ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) ++static irqreturn_t bcm_interrupt (int irq, void * dev, struct pt_regs * regs) ++#else ++static void bcm_interrupt (int irq, void * dev, struct pt_regs * regs) ++#endif ++{ ++ struct bcm_serial * info = lines[0]; ++ UINT16 intStat; ++ ++ /* get pending interrupt flags from UART */ ++ ++ /* Mask with only the serial interrupts that are enabled */ ++ intStat = info->port->intStatus & info->port->intMask; ++ while (intStat) ++ { ++ if (intStat & RXINT) ++ receive_chars (info); ++ else ++ if (intStat & TXINT) ++ info->port->intStatus = TXINT; ++ else /* don't know what it was, so let's mask it */ ++ info->port->intMask &= ~intStat; ++ ++ intStat = info->port->intStatus & info->port->intMask; ++ } ++ ++ // Clear the interrupt ++ BcmHalInterruptEnable (INTERRUPT_ID_UART); ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) ++ return IRQ_HANDLED; ++#endif ++} ++ ++/* ++ * ------------------------------------------------------------------- ++ * startup () ++ * ++ * various initialization tasks ++ * ------------------------------------------------------------------- ++ */ ++static int startup (struct bcm_serial *info) ++{ ++ // Port is already started... ++ return 0; ++} ++ ++/* ++ * ------------------------------------------------------------------- ++ * shutdown () ++ * ++ * This routine will shutdown a serial port; interrupts are disabled, and ++ * DTR is dropped if the hangup on close termio flag is on. ++ * ------------------------------------------------------------------- ++ */ ++static void shutdown (struct bcm_serial * info) ++{ ++ unsigned long flags; ++ if (!info->is_initialized) ++ return; ++ ++ ++ /*save_flags (flags); ++ cli ();*/ ++ spin_lock_irqsave(&bcm963xx_serial_lock, flags); ++ ++ info->port->control &= ~(BRGEN|TXEN|RXEN); ++ if (info->tty) ++ set_bit (TTY_IO_ERROR, &info->tty->flags); ++ info->is_initialized = 0; ++ ++ //restore_flags (flags); ++ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags); ++} ++/* ++ * ------------------------------------------------------------------- ++ * change_speed () ++ * ++ * Set the baud rate, character size, parity and stop bits. ++ * ------------------------------------------------------------------- ++ */ ++static void change_speed( volatile Uart *pUart, tcflag_t cFlag ) ++{ ++ unsigned long ulFlags, ulBaud, ulClockFreqHz, ulTmp; ++ /*save_flags(ulFlags); ++ cli();*/ ++ spin_lock_irqsave(&bcm963xx_serial_lock, ulFlags); ++ ++ switch( cFlag & (CBAUD | CBAUDEX) ) ++ { ++ case B115200: ++ ulBaud = 115200; ++ break; ++ case B57600: ++ ulBaud = 57600; ++ break; ++ case B38400: ++ ulBaud = 38400; ++ break; ++ case B19200: ++ ulBaud = 19200; ++ break; ++ case B9600: ++ ulBaud = 9600; ++ break; ++ case B4800: ++ ulBaud = 4800; ++ break; ++ case B2400: ++ ulBaud = 2400; ++ break; ++ case B1800: ++ ulBaud = 1800; ++ break; ++ case B1200: ++ ulBaud = 1200; ++ break; ++ case B600: ++ ulBaud = 600; ++ break; ++ case B300: ++ ulBaud = 300; ++ break; ++ case B200: ++ ulBaud = 200; ++ break; ++ case B150: ++ ulBaud = 150; ++ break; ++ case B134: ++ ulBaud = 134; ++ break; ++ case B110: ++ ulBaud = 110; ++ break; ++ case B75: ++ ulBaud = 75; ++ break; ++ case B50: ++ ulBaud = 50; ++ break; ++ default: ++ ulBaud = 115200; ++ break; ++ } ++ ++ /* Calculate buad rate. */ ++ ulClockFreqHz = BD_BCM63XX_TIMER_CLOCK_INPUT; ++ ulTmp = (ulClockFreqHz / ulBaud) / 16; ++ if( ulTmp & 0x01 ) ++ ulTmp /= 2; /* Rounding up, so sub is already accounted for */ ++ else ++ ulTmp = (ulTmp / 2) - 1; /* Rounding down so we must sub 1 */ ++ pUart->baudword = ulTmp; ++ ++ /* Set character size, stop bits and parity. */ ++ switch( cFlag & CSIZE ) ++ { ++ case CS5: ++ ulTmp = BITS5SYM; /* select transmit 5 bit data size */ ++ break; ++ case CS6: ++ ulTmp = BITS6SYM; /* select transmit 6 bit data size */ ++ break; ++ case CS7: ++ ulTmp = BITS7SYM; /* select transmit 7 bit data size */ ++ break; ++ /*case CS8:*/ ++ default: ++ ulTmp = BITS8SYM; /* select transmit 8 bit data size */ ++ break; ++ } ++ if( cFlag & CSTOPB ) ++ ulTmp |= TWOSTOP; /* select 2 stop bits */ ++ else ++ ulTmp |= ONESTOP; /* select one stop bit */ ++ ++ /* Write these values into the config reg. */ ++ pUart->config = ulTmp; ++ pUart->control &= ~(RXPARITYEN | TXPARITYEN | RXPARITYEVEN | TXPARITYEVEN); ++ switch( cFlag & (PARENB | PARODD) ) ++ { ++ case PARENB|PARODD: ++ pUart->control |= RXPARITYEN | TXPARITYEN; ++ break; ++ case PARENB: ++ pUart->control |= RXPARITYEN | TXPARITYEN | RXPARITYEVEN | TXPARITYEVEN; ++ break; ++ default: ++ pUart->control |= 0; ++ break; ++ } ++ ++ /* Reset and flush uart */ ++ pUart->fifoctl = RSTTXFIFOS | RSTRXFIFOS; ++ //restore_flags( ulFlags ); ++ spin_unlock_irqrestore(&bcm963xx_serial_lock, ulFlags); ++} ++ ++ ++/* ++ * ------------------------------------------------------------------- ++ * bcm_flush_char () ++ * ++ * Nothing to flush. Polled I/O is used. ++ * ------------------------------------------------------------------- ++ */ ++static void bcm63xx_cons_flush_chars (struct tty_struct *tty) ++{ ++} ++ ++ ++/* ++ * ------------------------------------------------------------------- ++ * bcm63xx_cons_write () ++ * ++ * Main output routine using polled I/O. ++ * ------------------------------------------------------------------- ++ */ ++static int bcm63xx_cons_write (struct tty_struct *tty, int from_user, ++ const unsigned char *buf, int count) ++{ ++ int c; ++ ++ for (c = 0; c < count; c++) ++ _putc(buf[c]); ++ return count; ++} ++ ++/* ++ * ------------------------------------------------------------------- ++ * bcm63xx_cons_write_room () ++ * ++ * Compute the amount of space available for writing. ++ * ------------------------------------------------------------------- ++ */ ++static int bcm63xx_cons_write_room (struct tty_struct *tty) ++{ ++ /* Pick a number. Any number. Polled I/O is used. */ ++ return 1024; ++} ++ ++/* ++ * ------------------------------------------------------------------- ++ * bcm_chars_in_buffer () ++ * ++ * compute the amount of char left to be transmitted ++ * ------------------------------------------------------------------- ++ */ ++static int bcm_chars_in_buffer (struct tty_struct *tty) ++{ ++ return 0; ++} ++ ++/* ++ * ------------------------------------------------------------------- ++ * bcm_flush_buffer () ++ * ++ * Empty the output buffer ++ * ------------------------------------------------------------------- ++ */ ++static void bcm_flush_buffer (struct tty_struct *tty) ++{ ++} ++ ++/* ++ * ------------------------------------------------------------ ++ * bcm_throttle () and bcm_unthrottle () ++ * ++ * This routine is called by the upper-layer tty layer to signal that ++ * incoming characters should be throttled (or not). ++ * ------------------------------------------------------------ ++ */ ++static void bcm_throttle (struct tty_struct *tty) ++{ ++ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data; ++ if (I_IXOFF(tty)) ++ info->x_char = STOP_CHAR(tty); ++} ++ ++static void bcm_unthrottle (struct tty_struct *tty) ++{ ++ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data; ++ if (I_IXOFF(tty)) ++ { ++ if (info->x_char) ++ info->x_char = 0; ++ else ++ info->x_char = START_CHAR(tty); ++ } ++} ++ ++static void bcm_send_xchar (struct tty_struct *tty, char ch) ++{ ++ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data; ++ info->x_char = ch; ++ if (ch) ++ bcm_start (info->tty); ++} ++ ++/* ++ * ------------------------------------------------------------ ++ * rs_ioctl () and friends ++ * ------------------------------------------------------------ ++ */ ++static int get_serial_info(struct bcm_serial *info, struct serial_struct *retinfo) ++{ ++ struct serial_struct tmp; ++ ++ if (!retinfo) ++ return -EFAULT; ++ ++ memset (&tmp, 0, sizeof(tmp)); ++ tmp.type = info->type; ++ tmp.line = info->line; ++ tmp.port = (int) info->port; ++ tmp.irq = info->irq; ++ tmp.flags = 0; ++ tmp.baud_base = info->baud_base; ++ tmp.close_delay = info->close_delay; ++ tmp.closing_wait = info->closing_wait; ++ ++ return copy_to_user (retinfo, &tmp, sizeof(*retinfo)); ++} ++ ++static int set_serial_info (struct bcm_serial *info, struct serial_struct *new_info) ++{ ++ struct serial_struct new_serial; ++ struct bcm_serial old_info; ++ int retval = 0; ++ ++ if (!new_info) ++ return -EFAULT; ++ ++ copy_from_user (&new_serial, new_info, sizeof(new_serial)); ++ old_info = *info; ++ ++ if (!capable(CAP_SYS_ADMIN)) ++ return -EPERM; ++ ++ ++ if (info->count > 1) ++ return -EBUSY; ++ ++ /* OK, past this point, all the error checking has been done. ++ * At this point, we start making changes..... ++ */ ++ info->baud_base = new_serial.baud_base; ++ info->type = new_serial.type; ++ info->close_delay = new_serial.close_delay; ++ info->closing_wait = new_serial.closing_wait; ++ retval = startup (info); ++ return retval; ++} ++ ++/* ++ * get_lsr_info - get line status register info ++ * ++ * Purpose: Let user call ioctl() to get info when the UART physically ++ * is emptied. On bus types like RS485, the transmitter must ++ * release the bus after transmitting. This must be done when ++ * the transmit shift register is empty, not be done when the ++ * transmit holding register is empty. This functionality ++ * allows an RS485 driver to be written in user space. ++ */ ++static int get_lsr_info (struct bcm_serial *info, unsigned int *value) ++{ ++ return( 0 ); ++} ++ ++/* ++ * This routine sends a break character out the serial port. ++ */ ++static void send_break (struct bcm_serial *info, int duration) ++{ ++ unsigned long flags; ++ ++ if (!info->port) ++ return; ++ ++ current->state = TASK_INTERRUPTIBLE; ++ ++ /*save_flags (flags); ++ cli();*/ ++ spin_lock_irqsave(&bcm963xx_serial_lock, flags); ++ ++ info->port->control |= XMITBREAK; ++ schedule_timeout(duration); ++ info->port->control &= ~XMITBREAK; ++ ++ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags); ++ //restore_flags (flags); ++} ++ ++static int bcm_ioctl (struct tty_struct * tty, struct file * file, ++ unsigned int cmd, unsigned long arg) ++{ ++ int error; ++ struct bcm_serial * info = (struct bcm_serial *)tty->driver_data; ++ int retval; ++ ++ if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && ++ (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) && ++ (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT)) ++ { ++ if (tty->flags & (1 << TTY_IO_ERROR)) ++ return -EIO; ++ } ++ switch (cmd) ++ { ++ ++ case TCSBRK: /* SVID version: non-zero arg --> no break */ ++ retval = tty_check_change (tty); ++ if (retval) ++ return retval; ++ tty_wait_until_sent (tty, 0); ++ if (!arg) ++ send_break (info, HZ/4); /* 1/4 second */ ++ return 0; ++ ++ case TCSBRKP: /* support for POSIX tcsendbreak() */ ++ retval = tty_check_change (tty); ++ if (retval) ++ return retval; ++ tty_wait_until_sent (tty, 0); ++ send_break (info, arg ? arg*(HZ/10) : HZ/4); ++ return 0; ++ ++ case TIOCGSOFTCAR: ++ error = access_ok (VERIFY_WRITE, (void *)arg, sizeof(long)); ++ if (!error) ++ return -EFAULT; ++ else ++ { ++ put_user (C_CLOCAL(tty) ? 1 : 0, (unsigned long *)arg); ++ return 0; ++ } ++ ++ case TIOCSSOFTCAR: ++ error = get_user (arg, (unsigned long *)arg); ++ if (error) ++ return error; ++ tty->termios->c_cflag = ((tty->termios->c_cflag & ~CLOCAL) | (arg ? CLOCAL : 0)); ++ return 0; ++ ++ case TIOCGSERIAL: ++ error = access_ok (VERIFY_WRITE, (void *)arg, sizeof(struct serial_struct)); ++ if (!error) ++ return -EFAULT; ++ else ++ return get_serial_info (info, (struct serial_struct *)arg); ++ ++ case TIOCSSERIAL: ++ return set_serial_info (info, (struct serial_struct *) arg); ++ ++ case TIOCSERGETLSR: /* Get line status register */ ++ error = access_ok (VERIFY_WRITE, (void *)arg, sizeof(unsigned int)); ++ if (!error) ++ return -EFAULT; ++ else ++ return get_lsr_info (info, (unsigned int *)arg); ++ ++ case TIOCSERGSTRUCT: ++ error = access_ok (VERIFY_WRITE, (void *)arg, sizeof(struct bcm_serial)); ++ if (!error) ++ return -EFAULT; ++ else ++ { ++ copy_to_user((struct bcm_serial *)arg, info, sizeof(struct bcm_serial)); ++ return 0; ++ } ++ ++ default: ++ return -ENOIOCTLCMD; ++ } ++ return 0; ++} ++ ++static void bcm_set_termios (struct tty_struct *tty, struct termios *old_termios) ++{ ++ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data; ++ ++ if( tty->termios->c_cflag != old_termios->c_cflag ) ++ change_speed (info->port, tty->termios->c_cflag); ++} ++ ++/* ++ * ------------------------------------------------------------ ++ * bcm63xx_cons_close() ++ * ++ * This routine is called when the serial port gets closed. First, we ++ * wait for the last remaining data to be sent. Then, we turn off ++ * the transmit enable and receive enable flags. ++ * ------------------------------------------------------------ ++ */ ++static void bcm63xx_cons_close (struct tty_struct *tty, struct file *filp) ++{ ++ struct bcm_serial * info = (struct bcm_serial *)tty->driver_data; ++ unsigned long flags; ++ ++ if (!info) ++ return; ++ ++ /*save_flags (flags); ++ cli();*/ ++ spin_lock_irqsave(&bcm963xx_serial_lock, flags); ++ ++ if (tty_hung_up_p (filp)) ++ { ++ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags); ++ //restore_flags (flags); ++ return; ++ } ++ ++ if ((tty->count == 1) && (info->count != 1)) ++ { ++ ++ /* Uh, oh. tty->count is 1, which means that the tty ++ * structure will be freed. Info->count should always ++ * be one in these conditions. If it's greater than ++ * one, we've got real problems, since it means the ++ * serial port won't be shutdown. ++ */ ++ printk("bcm63xx_cons_close: bad serial port count; tty->count is 1, " ++ "info->count is %d\n", info->count); ++ info->count = 1; ++ } ++ ++ if (--info->count < 0) ++ { ++ printk("ds_close: bad serial port count for ttys%d: %d\n", ++ info->line, info->count); ++ info->count = 0; ++ } ++ ++ if (info->count) ++ { ++ //restore_flags (flags); ++ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags); ++ return; ++ } ++ ++ /* Now we wait for the transmit buffer to clear; and we notify ++ * the line discipline to only process XON/XOFF characters. ++ */ ++ tty->closing = 1; ++ ++ /* At this point we stop accepting input. To do this, we ++ * disable the receive line status interrupts. ++ */ ++ shutdown (info); ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) ++ if (tty->driver->flush_buffer) ++ tty->driver->flush_buffer (tty); ++#else ++ if (tty->driver.flush_buffer) ++ tty->driver.flush_buffer (tty); ++#endif ++ if (tty->ldisc.flush_buffer) ++ tty->ldisc.flush_buffer (tty); ++ ++ tty->closing = 0; ++ info->event = 0; ++ info->tty = 0; ++ if (tty->ldisc.num != tty_ldisc_get(N_TTY)->num) ++ { ++ if (tty->ldisc.close) ++ (tty->ldisc.close)(tty); ++ tty->ldisc = *tty_ldisc_get(N_TTY); ++ tty->termios->c_line = N_TTY; ++ if (tty->ldisc.open) ++ (tty->ldisc.open)(tty); ++ } ++ if (info->blocked_open) ++ { ++ if (info->close_delay) ++ { ++ current->state = TASK_INTERRUPTIBLE; ++ schedule_timeout(info->close_delay); ++ } ++ wake_up_interruptible (&info->open_wait); ++ } ++ wake_up_interruptible (&info->close_wait); ++ ++ //restore_flags (flags); ++ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags); ++} ++ ++/* ++ * bcm_hangup () --- called by tty_hangup() when a hangup is signaled. ++ */ ++static void bcm_hangup (struct tty_struct *tty) ++{ ++ ++ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data; ++ ++ shutdown (info); ++ info->event = 0; ++ info->count = 0; ++ info->tty = 0; ++ wake_up_interruptible (&info->open_wait); ++} ++ ++/* ++ * ------------------------------------------------------------ ++ * rs_open() and friends ++ * ------------------------------------------------------------ ++ */ ++static int block_til_ready (struct tty_struct *tty, struct file *filp, ++ struct bcm_serial *info) ++{ ++ return 0; ++} ++ ++/* ++ * This routine is called whenever a serial port is opened. It ++ * enables interrupts for a serial port. It also performs the ++ * serial-specific initialization for the tty structure. ++ */ ++static int bcm63xx_cons_open (struct tty_struct * tty, struct file * filp) ++{ ++ struct bcm_serial *info; ++ int retval, line; ++ ++ // Make sure we're only opening on of the ports we support ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) ++ line = MINOR(tty->driver->cdev.dev) - tty->driver->minor_start; ++#else ++ line = MINOR(tty->device) - tty->driver.minor_start; ++#endif ++ ++ if ((line < 0) || (line >= BCM_NUM_UARTS)) ++ return -ENODEV; ++ ++ info = lines[line]; ++ ++ info->port->intMask = 0; /* Clear any pending interrupts */ ++ info->port->intMask = RXINT; /* Enable RX */ ++ ++ info->count++; ++ tty->driver_data = info; ++ info->tty = tty; ++ BcmHalInterruptEnable (INTERRUPT_ID_UART); ++ ++ // Start up serial port ++ retval = startup (info); ++ if (retval) ++ return retval; ++ ++ retval = block_til_ready (tty, filp, info); ++ if (retval) ++ return retval; ++ ++ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) ++ info->pgrp = process_group(current); ++ info->session = current->signal->session; ++#else ++ info->session = current->session; ++ info->pgrp = current->pgrp; ++#endif ++ ++ return 0; ++} ++ ++/* -------------------------------------------------------------------------- ++ Name: bcm63xx_serialinit ++ Purpose: Initialize our BCM63xx serial driver ++-------------------------------------------------------------------------- */ ++static int __init bcm63xx_serialinit(void) ++{ ++ int i, flags; ++ struct bcm_serial * info; ++ ++ // Print the driver version information ++ printk(VER_STR); ++ ++ memset(&serial_driver, 0, sizeof(struct tty_driver)); ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) ++ serial_driver.owner = THIS_MODULE; ++ serial_driver.devfs_name = "tts/"; ++#endif ++ serial_driver.magic = TTY_DRIVER_MAGIC; ++ serial_driver.name = "ttyS"; ++ serial_driver.major = TTY_MAJOR; ++ serial_driver.minor_start = 64; ++ serial_driver.num = BCM_NUM_UARTS; ++ serial_driver.type = TTY_DRIVER_TYPE_SERIAL; ++ serial_driver.subtype = SERIAL_TYPE_NORMAL; ++ serial_driver.init_termios = tty_std_termios; ++ serial_driver.init_termios.c_cflag = B115200 | CS8 | CREAD | CLOCAL; ++ serial_driver.flags = TTY_DRIVER_REAL_RAW; ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) ++ serial_driver.refcount = serial_refcount; ++ serial_driver.ttys = serial_table; ++#else ++ serial_driver.refcount = &serial_refcount; ++ serial_driver.table = serial_table; ++#endif ++ ++ serial_driver.termios = serial_termios; ++ serial_driver.termios_locked = serial_termios_locked; ++ serial_driver.open = bcm63xx_cons_open; ++ serial_driver.close = bcm63xx_cons_close; ++ serial_driver.write = bcm63xx_cons_write; ++ serial_driver.flush_chars = bcm63xx_cons_flush_chars; ++ serial_driver.write_room = bcm63xx_cons_write_room; ++ serial_driver.chars_in_buffer = bcm_chars_in_buffer; ++ serial_driver.flush_buffer = bcm_flush_buffer; ++ serial_driver.ioctl = bcm_ioctl; ++ serial_driver.throttle = bcm_throttle; ++ serial_driver.unthrottle = bcm_unthrottle; ++ serial_driver.send_xchar = bcm_send_xchar; ++ serial_driver.set_termios = bcm_set_termios; ++ serial_driver.stop = bcm_stop; ++ serial_driver.start = bcm_start; ++ serial_driver.hangup = bcm_hangup; ++ ++ if (tty_register_driver (&serial_driver)) ++ panic("Couldn't register serial driver\n"); ++ ++ //save_flags(flags); cli(); ++ spin_lock_irqsave(&bcm963xx_serial_lock, flags); ++ ++ for (i = 0; i < BCM_NUM_UARTS; i++) ++ { ++ info = &multi[i]; ++ lines[i] = info; ++ info->port = (Uart *) ((char *)UART_BASE + (i * 0x20)); ++ info->irq = (2 - i) + 8; ++ info->line = i; ++ info->tty = 0; ++ info->close_delay = 50; ++ info->closing_wait = 3000; ++ info->x_char = 0; ++ info->event = 0; ++ info->count = 0; ++ info->blocked_open = 0; ++ info->normal_termios = serial_driver.init_termios; ++ init_waitqueue_head(&info->open_wait); ++ init_waitqueue_head(&info->close_wait); ++ ++ /* If we are pointing to address zero then punt - not correctly ++ * set up in setup.c to handle this. ++ */ ++ if (! info->port) ++ return 0; ++ BcmHalMapInterrupt(bcm_interrupt, 0, INTERRUPT_ID_UART); ++ } ++ ++ /* order matters here... the trick is that flags ++ * is updated... in request_irq - to immediatedly obliterate ++ * it is unwise. ++ */ ++ //restore_flags(flags); ++ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags); ++ return 0; ++} ++ ++module_init(bcm63xx_serialinit); ++ ++/* -------------------------------------------------------------------------- ++ Name: bcm_console_print ++ Purpose: bcm_console_print is registered for printk. ++ The console_lock must be held when we get here. ++-------------------------------------------------------------------------- */ ++static void bcm_console_print (struct console * cons, const char * str, ++ unsigned int count) ++{ ++ unsigned int i; ++ //_puts(str); ++ for(i=0; i<count; i++, str++) ++ { ++ _putc(*str); ++ if (*str == 10) ++ { ++ _putc(13); ++ } ++ } ++} ++ ++static struct tty_driver * bcm_console_device(struct console * c, int *index) ++{ ++ *index = c->index; ++ return &serial_driver; ++} ++ ++static int __init bcm_console_setup(struct console * co, char * options) ++{ ++ return 0; ++} ++ ++static struct console bcm_sercons = { ++ .name = "ttyS", ++ .write = bcm_console_print, ++ .device = bcm_console_device, ++ .setup = bcm_console_setup, ++ .flags = CON_PRINTBUFFER, // CON_CONSDEV, CONSOLE_LINE, ++ .index = -1, ++}; ++ ++static int __init bcm63xx_console_init(void) ++{ ++ register_console(&bcm_sercons); ++ return 0; ++} ++ ++console_initcall(bcm63xx_console_init); +diff -urN linux.old/bcmdrivers/opensource/char/serial/impl1/Makefile linux.dev/bcmdrivers/opensource/char/serial/impl1/Makefile +--- linux.old/bcmdrivers/opensource/char/serial/impl1/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/bcmdrivers/opensource/char/serial/impl1/Makefile 2006-08-25 00:39:38.000000000 +0200 +@@ -0,0 +1,13 @@ ++# File: bcmdrivers/opensource/char/serial ++# ++# Makefile for the BCM63xx serial/console driver ++ ++obj-$(CONFIG_BCM_SERIAL) += bcm63xx_cons.o ++ ++EXTRA_CFLAGS += -I$(INC_BRCMDRIVER_PUB_PATH)/$(BRCM_BOARD) ++ ++-include $(TOPDIR)/Rules.make ++ ++clean: ++ rm -f core *.o *.a *.s ++ +diff -urN linux.old/boardparms/bcm963xx/boardparms.c linux.dev/boardparms/bcm963xx/boardparms.c +--- linux.old/boardparms/bcm963xx/boardparms.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/boardparms/bcm963xx/boardparms.c 2006-08-25 00:39:38.000000000 +0200 +@@ -0,0 +1,2392 @@ ++/* ++<:copyright-gpl ++ ++ Copyright 2003 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++ ++:> ++*/ ++/************************************************************************** ++ * File Name : boardparms.c ++ * ++ * Description: This file contains the implementation for the BCM63xx board ++ * parameter access functions. ++ * ++ * Updates : 07/14/2003 Created. ++ ***************************************************************************/ ++ ++/* Includes. */ ++#include <linux/config.h> ++#include "boardparms.h" ++ ++/* Defines. */ ++ ++/* Default psi size in K bytes */ ++#define BP_PSI_DEFAULT_SIZE 24 ++ ++/* Typedefs */ ++typedef struct boardparameters ++{ ++ char szBoardId[BP_BOARD_ID_LEN]; /* board id string */ ++ ETHERNET_MAC_INFO EnetMacInfos[BP_MAX_ENET_MACS]; ++ VOIP_DSP_INFO VoIPDspInfo[BP_MAX_VOIP_DSP]; ++ unsigned short usSdramSize; /* SDRAM size and type */ ++ unsigned short usPsiSize; /* persistent storage in K bytes */ ++ unsigned short usGpioRj11InnerPair; /* GPIO pin or not defined */ ++ unsigned short usGpioRj11OuterPair; /* GPIO pin or not defined */ ++ unsigned short usGpioPressAndHoldReset; /* GPIO pin or not defined */ ++ unsigned short usGpioPcmciaReset; /* GPIO pin or not defined */ ++ unsigned short usGpioUartRts; /* GPIO pin or not defined */ ++ unsigned short usGpioUartCts; /* GPIO pin or not defined */ ++ unsigned short usGpioLedAdsl; /* GPIO pin or not defined */ ++ unsigned short usGpioLedAdslFail; /* GPIO pin or not defined */ ++ unsigned short usGpioLedWireless; /* GPIO pin or not defined */ ++ unsigned short usGpioLedUsb; /* GPIO pin or not defined */ ++ unsigned short usGpioLedHpna; /* GPIO pin or not defined */ ++ unsigned short usGpioLedWanData; /* GPIO pin or not defined */ ++ unsigned short usGpioLedPpp; /* GPIO pin or not defined */ ++ unsigned short usGpioLedPppFail; /* GPIO pin or not defined */ ++ unsigned short usGpioLedBlPowerOn; /* GPIO pin or not defined */ ++ unsigned short usGpioLedBlAlarm; /* GPIO pin or not defined */ ++ unsigned short usGpioLedBlResetCfg; /* GPIO pin or not defined */ ++ unsigned short usGpioLedBlStop; /* GPIO pin or not defined */ ++ unsigned short usExtIntrWireless; /* ext intr or not defined */ ++ unsigned short usExtIntrAdslDyingGasp; /* ext intr or not defined */ ++ unsigned short usExtIntrHpna; /* ext intr or not defined */ ++ unsigned short usCsHpna; /* chip select not defined */ ++ unsigned short usAntInUseWireless; /* antenna in use or not defined */ ++ unsigned short usGpioSesBtnWireless; /* GPIO pin or not defined */ ++ unsigned short usExtIntrSesBtnWireless; /* ext intr or not defined */ ++ unsigned short usGpioLedSesWireless; /* GPIO pin or not defined */ ++} BOARD_PARAMETERS, *PBOARD_PARAMETERS; ++ ++/* Variables */ ++#if defined(_BCM96338_) || defined(CONFIG_BCM96338) ++static BOARD_PARAMETERS g_bcm96338sv = ++{ ++ "96338SV", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_NOT_DEFINED, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_NOT_DEFINED, /* usGpioLedWanData */ ++ BP_NOT_DEFINED, /* usGpioLedPpp */ ++ BP_NOT_DEFINED, /* usGpioLedPppFail */ ++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_NOT_DEFINED, /* usGpioLedBlResetCfg */ ++ BP_NOT_DEFINED, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++static BOARD_PARAMETERS g_bcm96338l2m8m = ++{ ++ "96338L-2M-8M", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_GPIO_2_AL, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_3_AL, /* usGpioLedWanData */ ++ BP_GPIO_3_AL, /* usGpioLedPpp */ ++ BP_GPIO_4_AL, /* usGpioLedPppFail */ ++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ ++ BP_GPIO_1_AL, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++static PBOARD_PARAMETERS g_BoardParms[] = ++ {&g_bcm96338sv, &g_bcm96338l2m8m, 0}; ++#endif ++ ++#if defined(_BCM96345_) || defined(CONFIG_BCM96345) ++static BOARD_PARAMETERS g_bcm96345r = ++{ ++ "96345R", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_GPIO_11_AH, /* usGpioRj11InnerPair */ ++ BP_GPIO_12_AH, /* usGpioRj11OuterPair */ ++ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_GPIO_8_AH, /* usGpioLedAdsl */ ++ BP_NOT_DEFINED, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_8_AH, /* usGpioLedWanData */ ++ BP_GPIO_9_AH, /* usGpioLedPpp */ ++ BP_NOT_DEFINED, /* usGpioLedPppFail */ ++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ ++ BP_GPIO_10_AH, /* usGpioLedBlAlarm */ ++ BP_GPIO_9_AH, /* usGpioLedBlResetCfg */ ++ BP_GPIO_8_AH, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96345gw2 = ++{ ++ /* A hardware jumper determines whether GPIO 13 is used for Press and Hold ++ * Reset or RTS. ++ */ ++ "96345GW2", /* szBoardId */ ++ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ ++ 0x00, /* ucPhyAddress */ ++ BP_GPIO_0_AH, /* usGpioPhySpiSck */ ++ BP_GPIO_4_AH, /* usGpioPhySpiSs */ ++ BP_GPIO_12_AH, /* usGpioPhySpiMosi */ ++ BP_GPIO_11_AH, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x04, /* numSwitchPorts */ ++ BP_ENET_CONFIG_GPIO, /* usConfigType */ ++ BP_ENET_REVERSE_MII}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_DSP, /* ucDspType */ ++ 0x00, /* ucDspAddress */ ++ BP_EXT_INTR_1, /* usExtIntrVoip */ ++ BP_GPIO_6_AH, /* usGpioVoipReset */ ++ BP_GPIO_15_AH, /* usGpioVoipIntr */ ++ BP_NOT_DEFINED, /* usGpioLedVoip */ ++ BP_CS_2}, /* usCsVoip */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */ ++ BP_GPIO_2_AH, /* usGpioPcmciaReset */ ++ BP_GPIO_13_AH, /* usGpioUartRts */ ++ BP_GPIO_9_AH, /* usGpioUartCts */ ++ BP_GPIO_8_AH, /* usGpioLedAdsl */ ++ BP_NOT_DEFINED, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_GPIO_7_AH, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_8_AH, /* usGpioLedWanData */ ++ BP_NOT_DEFINED, /* usGpioLedPpp */ ++ BP_NOT_DEFINED, /* usGpioLedPppFail */ ++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ ++ BP_GPIO_10_AH, /* usGpioLedBlAlarm */ ++ BP_GPIO_7_AH, /* usGpioLedBlResetCfg */ ++ BP_GPIO_8_AH, /* usGpioLedBlStop */ ++ BP_EXT_INTR_2, /* usExtIntrWireless */ ++ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96345gw = ++{ ++ "96345GW", /* szBoardId */ ++ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ ++ 0x00, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x04, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_ENET_NO_REVERSE_MII}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_DSP, /* ucDspType */ ++ 0x00, /* ucDspAddress */ ++ BP_EXT_INTR_1, /* usExtIntrVoip */ ++ BP_GPIO_6_AH, /* usGpioVoipReset */ ++ BP_GPIO_15_AH, /* usGpioVoipIntr */ ++ BP_NOT_DEFINED, /* usGpioLedVoip */ ++ BP_CS_2}, /* usCsVoip */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_GPIO_11_AH, /* usGpioRj11InnerPair */ ++ BP_GPIO_1_AH, /* usGpioRj11OuterPair */ ++ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */ ++ BP_GPIO_2_AH, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_GPIO_8_AH, /* usGpioLedAdsl */ ++ BP_NOT_DEFINED, /* usGpioLedAdslFail */ ++ BP_GPIO_10_AH, /* usGpioLedWireless */ ++ BP_GPIO_7_AH, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_8_AH, /* usGpioLedWanData */ ++ BP_NOT_DEFINED, /* usGpioLedPpp */ ++ BP_NOT_DEFINED, /* usGpioLedPppFail */ ++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ ++ BP_GPIO_9_AH, /* usGpioLedBlAlarm */ ++ BP_GPIO_10_AH, /* usGpioLedBlResetCfg */ ++ BP_GPIO_8_AH, /* usGpioLedBlStop */ ++ BP_EXT_INTR_2, /* usExtIntrWireless */ ++ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */ ++ BP_EXT_INTR_3, /* usExtIntrHpna */ ++ BP_CS_1, /* usCsHpna */ ++ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96335r = ++{ ++ "96335R", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_14_AH, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_GPIO_9_AH, /* usGpioLedAdsl */ ++ BP_NOT_DEFINED, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_9_AH, /* usGpioLedWanData */ ++ BP_GPIO_8_AH, /* usGpioLedPpp */ ++ BP_NOT_DEFINED, /* usGpioLedPppFail */ ++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ ++ BP_GPIO_10_AH, /* usGpioLedBlAlarm */ ++ BP_GPIO_8_AH, /* usGpioLedBlResetCfg */ ++ BP_GPIO_9_AH, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96345r0 = ++{ ++ "96345R0", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_GPIO_8_AH, /* usGpioLedAdsl */ ++ BP_NOT_DEFINED, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_9_AH, /* usGpioLedWanData */ ++ BP_GPIO_9_AH, /* usGpioLedPpp */ ++ BP_NOT_DEFINED, /* usGpioLedPppFail */ ++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ ++ BP_GPIO_9_AH, /* usGpioLedBlAlarm */ ++ BP_GPIO_8_AH, /* usGpioLedBlResetCfg */ ++ BP_GPIO_8_AH, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96345rs = ++{ ++ "96345RS", /* szBoardId */ ++ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ ++ 0x00, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_ENET_NO_REVERSE_MII}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_GPIO_11_AH, /* usGpioRj11InnerPair */ ++ BP_GPIO_12_AH, /* usGpioRj11OuterPair */ ++ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_GPIO_8_AH, /* usGpioLedAdsl */ ++ BP_NOT_DEFINED, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_8_AH, /* usGpioLedWanData */ ++ BP_GPIO_9_AH, /* usGpioLedPpp */ ++ BP_NOT_DEFINED, /* usGpioLedPppFail */ ++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ ++ BP_GPIO_10_AH, /* usGpioLedBlAlarm */ ++ BP_GPIO_9_AH, /* usGpioLedBlResetCfg */ ++ BP_GPIO_8_AH, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static PBOARD_PARAMETERS g_BoardParms[] = ++ {&g_bcm96345r, &g_bcm96345gw2, &g_bcm96345gw, &g_bcm96335r, &g_bcm96345r0, ++ &g_bcm96345rs, 0}; ++#endif ++ ++#if defined(_BCM96348_) || defined(CONFIG_BCM96348) ++ ++static BOARD_PARAMETERS g_bcm96348r = ++{ ++ "96348R", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_7_AH, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_GPIO_2_AL, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_3_AL, /* usGpioLedWanData */ ++ BP_GPIO_3_AL, /* usGpioLedPpp */ ++ BP_GPIO_4_AL, /* usGpioLedPppFail */ ++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ ++ BP_GPIO_1_AL, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96348lv = ++{ ++ "96348LV", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_EXTERNAL_PHY, /* ucPhyType */ ++ 0x02, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_GPIO_5_AL, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}}, /* usReverseMii */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_7_AH, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_GPIO_2_AL, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_3_AL, /* usGpioLedWanData */ ++ BP_GPIO_3_AL, /* usGpioLedPpp */ ++ BP_GPIO_4_AL, /* usGpioLedPppFail */ ++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ ++ BP_GPIO_1_AL, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96348gw = ++{ ++ "96348GW", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ ++ 0x00, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x03, /* numSwitchPorts */ ++ BP_ENET_CONFIG_SPI_SSB_0, /* usConfigType */ ++ BP_ENET_REVERSE_MII}}, /* usReverseMii */ ++ {{BP_VOIP_DSP, /* ucDspType */ ++ 0x00, /* ucDspAddress */ ++ BP_EXT_INTR_2, /* usExtIntrVoip */ ++ BP_GPIO_6_AH, /* usGpioVoipReset */ ++ BP_GPIO_34_AH, /* usGpioVoipIntr */ ++ BP_NOT_DEFINED, /* usGpioLedVoip */ ++ BP_CS_2}, /* usCsVoip */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_GPIO_2_AL, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_3_AL, /* usGpioLedWanData */ ++ BP_GPIO_3_AL, /* usGpioLedPpp */ ++ BP_GPIO_4_AL, /* usGpioLedPppFail */ ++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ ++ BP_GPIO_1_AL, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* BP_GPIO_35_AH, */ /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* BP_EXT_INTR_3, */ /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* BP_GPIO_0_AL */ /* usGpioLedSesWireless */ ++}; ++ ++ ++static BOARD_PARAMETERS g_bcm96348gw_10 = ++{ ++ "96348GW-10", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ ++ 0x00, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x03, /* numSwitchPorts */ ++ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */ ++ BP_ENET_REVERSE_MII}}, /* usReverseMii */ ++ {{BP_VOIP_DSP, /* ucDspType */ ++ 0x00, /* ucDspAddress */ ++ BP_EXT_INTR_2, /* usExtIntrVoip */ ++ BP_GPIO_6_AH, /* usGpioVoipReset */ ++ BP_GPIO_34_AH, /* usGpioVoipIntr */ ++ BP_NOT_DEFINED, /* usGpioLedVoip */ ++ BP_CS_2}, /* usCsVoip */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_GPIO_2_AL, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_3_AL, /* usGpioLedWanData */ ++ BP_GPIO_3_AL, /* usGpioLedPpp */ ++ BP_GPIO_4_AL, /* usGpioLedPppFail */ ++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ ++ BP_GPIO_1_AL, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96348gw_11 = ++{ ++ "96348GW-11", /* szBoardId */ ++ {{BP_ENET_NO_PHY}, /* ucPhyType */ ++ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ ++ 0x00, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x04, /* numSwitchPorts */ ++ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */ ++ BP_ENET_REVERSE_MII}}, /* usReverseMii */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_GPIO_2_AL, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_3_AL, /* usGpioLedWanData */ ++ BP_GPIO_3_AL, /* usGpioLedPpp */ ++ BP_GPIO_4_AL, /* usGpioLedPppFail */ ++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ ++ BP_GPIO_1_AL, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96348sv = ++{ ++ "96348SV", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_EXTERNAL_PHY, /* ucPhyType */ ++ 0x1f, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}}, /* usReverseMii */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_32MB_2_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_NOT_DEFINED, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_NOT_DEFINED, /* usGpioLedWanData */ ++ BP_NOT_DEFINED, /* usGpioLedPpp */ ++ BP_NOT_DEFINED, /* usGpioLedPppFail */ ++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_NOT_DEFINED, /* usGpioLedBlResetCfg */ ++ BP_NOT_DEFINED, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++ ++static BOARD_PARAMETERS g_bcm96348gw_dualDsp = ++{ ++ "96348GW-DualDSP", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ ++ 0x00, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x03, /* numSwitchPorts */ ++ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */ ++ BP_ENET_REVERSE_MII}}, /* usReverseMii */ ++ {{BP_VOIP_DSP, /* ucDspType */ ++ 0x00, /* ucDspAddress */ ++ BP_EXT_INTR_2, /* usExtIntrVoip */ ++ BP_UNEQUIPPED, /* usGpioVoipReset */ ++ BP_GPIO_34_AH, /* usGpioVoipIntr */ ++ BP_NOT_DEFINED, /* usGpioLedVoip */ ++ BP_CS_2}, /* usCsVoip */ ++ {BP_VOIP_DSP, /* ucDspType */ ++ 0x01, /* ucDspAddress */ ++ BP_EXT_INTR_3, /* usExtIntrVoip */ ++ BP_UNEQUIPPED , /* usGpioVoipReset */ ++ BP_GPIO_35_AH, /* usGpioVoipIntr */ ++ BP_NOT_DEFINED, /* usGpioLedVoip */ ++ BP_CS_3}}, /* usCsVoip */ ++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_GPIO_2_AL, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_3_AL, /* usGpioLedWanData */ ++ BP_GPIO_3_AL, /* usGpioLedPpp */ ++ BP_GPIO_4_AL, /* usGpioLedPppFail */ ++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ ++ BP_GPIO_1_AL, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++ ++static BOARD_PARAMETERS g_bcmCustom_01 = ++{ ++ "BCMCUST_01", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_NO_PHY, /* ucPhyType */ ++ 0x00, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */ ++ BP_ENET_REVERSE_MII}}, /* usReverseMii */ ++ {{BP_VOIP_DSP, /* ucDspType */ ++ 0x00, /* ucDspAddress */ ++ BP_EXT_INTR_2, /* usExtIntrVoip */ ++ BP_GPIO_36_AH, /* usGpioVoipReset */ ++ BP_GPIO_34_AL, /* usGpioVoipIntr */ ++ BP_NOT_DEFINED, /* usGpioLedVoip */ ++ BP_CS_2}, /* usCsVoip */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_GPIO_2_AL, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_3_AL, /* usGpioLedWanData */ ++ BP_GPIO_3_AL, /* usGpioLedPpp */ ++ BP_GPIO_4_AL, /* usGpioLedPppFail */ ++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ ++ BP_GPIO_1_AL, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static PBOARD_PARAMETERS g_BoardParms[] = ++ {&g_bcm96348r, &g_bcm96348lv, &g_bcm96348gw, &g_bcm96348gw_10, ++ &g_bcm96348gw_11, &g_bcm96348sv, &g_bcm96348gw_dualDsp, ++ &g_bcmCustom_01, 0}; ++#endif ++ ++static PBOARD_PARAMETERS g_pCurrentBp = 0; ++ ++/************************************************************************** ++ * Name : bpstrcmp ++ * ++ * Description: String compare for this file so it does not depend on an OS. ++ * (Linux kernel and CFE share this source file.) ++ * ++ * Parameters : [IN] dest - destination string ++ * [IN] src - source string ++ * ++ * Returns : -1 - dest < src, 1 - dest > src, 0 dest == src ++ ***************************************************************************/ ++static int bpstrcmp(const char *dest,const char *src); ++static int bpstrcmp(const char *dest,const char *src) ++{ ++ while (*src && *dest) ++ { ++ if (*dest < *src) return -1; ++ if (*dest > *src) return 1; ++ dest++; ++ src++; ++ } ++ ++ if (*dest && !*src) return 1; ++ if (!*dest && *src) return -1; ++ return 0; ++} /* bpstrcmp */ ++ ++/************************************************************************** ++ * Name : BpGetVoipDspConfig ++ * ++ * Description: Gets the DSP configuration from the board parameter ++ * structure for a given DSP index. ++ * ++ * Parameters : [IN] dspNum - DSP index (number) ++ * ++ * Returns : Pointer to DSP configuration block if found/valid, NULL ++ * otherwise. ++ ***************************************************************************/ ++VOIP_DSP_INFO *BpGetVoipDspConfig( unsigned char dspNum ); ++VOIP_DSP_INFO *BpGetVoipDspConfig( unsigned char dspNum ) ++{ ++ VOIP_DSP_INFO *pDspConfig = 0; ++ int i; ++ ++ if( g_pCurrentBp ) ++ { ++ for( i = 0 ; i < BP_MAX_VOIP_DSP ; i++ ) ++ { ++ if( g_pCurrentBp->VoIPDspInfo[i].ucDspType != BP_VOIP_NO_DSP && ++ g_pCurrentBp->VoIPDspInfo[i].ucDspAddress == dspNum ) ++ { ++ pDspConfig = &g_pCurrentBp->VoIPDspInfo[i]; ++ break; ++ } ++ } ++ } ++ ++ return pDspConfig; ++} ++ ++ ++/************************************************************************** ++ * Name : BpSetBoardId ++ * ++ * Description: This function find the BOARD_PARAMETERS structure for the ++ * specified board id string and assigns it to a global, static ++ * variable. ++ * ++ * Parameters : [IN] pszBoardId - Board id string that is saved into NVRAM. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_FOUND - Error, board id input string does not ++ * have a board parameters configuration record. ++ ***************************************************************************/ ++int BpSetBoardId( char *pszBoardId ) ++{ ++ int nRet = BP_BOARD_ID_NOT_FOUND; ++ PBOARD_PARAMETERS *ppBp; ++ ++ for( ppBp = g_BoardParms; *ppBp; ppBp++ ) ++ { ++ if( !bpstrcmp((*ppBp)->szBoardId, pszBoardId) ) ++ { ++ g_pCurrentBp = *ppBp; ++ nRet = BP_SUCCESS; ++ break; ++ } ++ } ++ ++ return( nRet ); ++} /* BpSetBoardId */ ++ ++/************************************************************************** ++ * Name : BpGetBoardIds ++ * ++ * Description: This function returns all of the supported board id strings. ++ * ++ * Parameters : [OUT] pszBoardIds - Address of a buffer that the board id ++ * strings are returned in. Each id starts at BP_BOARD_ID_LEN ++ * boundary. ++ * [IN] nBoardIdsSize - Number of BP_BOARD_ID_LEN elements that ++ * were allocated in pszBoardIds. ++ * ++ * Returns : Number of board id strings returned. ++ ***************************************************************************/ ++int BpGetBoardIds( char *pszBoardIds, int nBoardIdsSize ) ++{ ++ PBOARD_PARAMETERS *ppBp; ++ int i; ++ char *src; ++ char *dest; ++ ++ for( i = 0, ppBp = g_BoardParms; *ppBp && nBoardIdsSize; ++ i++, ppBp++, nBoardIdsSize--, pszBoardIds += BP_BOARD_ID_LEN ) ++ { ++ dest = pszBoardIds; ++ src = (*ppBp)->szBoardId; ++ while( *src ) ++ *dest++ = *src++; ++ *dest = '\0'; ++ } ++ ++ return( i ); ++} /* BpGetBoardIds */ ++ ++/************************************************************************** ++ * Name : BpGetEthernetMacInfo ++ * ++ * Description: This function returns all of the supported board id strings. ++ * ++ * Parameters : [OUT] pEnetInfos - Address of an array of ETHERNET_MAC_INFO ++ * buffers. ++ * [IN] nNumEnetInfos - Number of ETHERNET_MAC_INFO elements that ++ * are pointed to by pEnetInfos. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ ***************************************************************************/ ++int BpGetEthernetMacInfo( PETHERNET_MAC_INFO pEnetInfos, int nNumEnetInfos ) ++{ ++ int i, nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ for( i = 0; i < nNumEnetInfos; i++, pEnetInfos++ ) ++ { ++ if( i < BP_MAX_ENET_MACS ) ++ { ++ unsigned char *src = (unsigned char *) ++ &g_pCurrentBp->EnetMacInfos[i]; ++ unsigned char *dest = (unsigned char *) pEnetInfos; ++ int len = sizeof(ETHERNET_MAC_INFO); ++ while( len-- ) ++ *dest++ = *src++; ++ } ++ else ++ pEnetInfos->ucPhyType = BP_ENET_NO_PHY; ++ } ++ ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ for( i = 0; i < nNumEnetInfos; i++, pEnetInfos++ ) ++ pEnetInfos->ucPhyType = BP_ENET_NO_PHY; ++ ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetEthernetMacInfo */ ++ ++/************************************************************************** ++ * Name : BpGetSdramSize ++ * ++ * Description: This function returns a constant that describees the board's ++ * SDRAM type and size. ++ * ++ * Parameters : [OUT] pulSdramSize - Address of short word that the SDRAM size ++ * is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ ***************************************************************************/ ++int BpGetSdramSize( unsigned long *pulSdramSize ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pulSdramSize = g_pCurrentBp->usSdramSize; ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ *pulSdramSize = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetSdramSize */ ++ ++/************************************************************************** ++ * Name : BpGetPsiSize ++ * ++ * Description: This function returns the persistent storage size in K bytes. ++ * ++ * Parameters : [OUT] pulPsiSize - Address of short word that the persistent ++ * storage size is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ ***************************************************************************/ ++int BpGetPsiSize( unsigned long *pulPsiSize ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pulPsiSize = g_pCurrentBp->usPsiSize; ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ *pulPsiSize = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetPsiSize */ ++ ++/************************************************************************** ++ * Name : BpGetRj11InnerOuterPairGpios ++ * ++ * Description: This function returns the GPIO pin assignments for changing ++ * between the RJ11 inner pair and RJ11 outer pair. ++ * ++ * Parameters : [OUT] pusInner - Address of short word that the RJ11 inner pair ++ * GPIO pin is returned in. ++ * [OUT] pusOuter - Address of short word that the RJ11 outer pair ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, values are returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetRj11InnerOuterPairGpios( unsigned short *pusInner, ++ unsigned short *pusOuter ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusInner = g_pCurrentBp->usGpioRj11InnerPair; ++ *pusOuter = g_pCurrentBp->usGpioRj11OuterPair; ++ ++ if( g_pCurrentBp->usGpioRj11InnerPair != BP_NOT_DEFINED && ++ g_pCurrentBp->usGpioRj11OuterPair != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusInner = *pusOuter = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetRj11InnerOuterPairGpios */ ++ ++/************************************************************************** ++ * Name : BpGetPressAndHoldResetGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the press ++ * and hold reset button. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the press and hold ++ * reset button GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetPressAndHoldResetGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioPressAndHoldReset; ++ ++ if( g_pCurrentBp->usGpioPressAndHoldReset != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetPressAndHoldResetGpio */ ++ ++/************************************************************************** ++ * Name : BpGetVoipResetGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the VOIP ++ * Reset operation. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the VOIP reset ++ * GPIO pin is returned in. ++ * [IN] dspNum - Address of the DSP to query. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipResetGpio( unsigned char dspNum, unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum ); ++ ++ if( pDspInfo ) ++ { ++ *pusValue = pDspInfo->usGpioVoipReset; ++ ++ if( *pusValue != BP_NOT_DEFINED || ++ *pusValue == BP_UNEQUIPPED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_FOUND; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetVoipResetGpio */ ++ ++/************************************************************************** ++ * Name : BpGetVoipIntrGpio ++ * ++ * Description: This function returns the GPIO pin assignment for VoIP interrupt. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the VOIP interrupt ++ * GPIO pin is returned in. ++ * [IN] dspNum - Address of the DSP to query. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipIntrGpio( unsigned char dspNum, unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum ); ++ ++ if( pDspInfo ) ++ { ++ *pusValue = pDspInfo->usGpioVoipIntr; ++ ++ if( *pusValue != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_FOUND; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetVoipIntrGpio */ ++ ++/************************************************************************** ++ * Name : BpGetPcmciaResetGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the PCMCIA ++ * Reset operation. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the PCMCIA reset ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetPcmciaResetGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioPcmciaReset; ++ ++ if( g_pCurrentBp->usGpioPcmciaReset != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetPcmciaResetGpio */ ++ ++/************************************************************************** ++ * Name : BpGetUartRtsCtsGpios ++ * ++ * Description: This function returns the GPIO pin assignments for RTS and CTS ++ * UART signals. ++ * ++ * Parameters : [OUT] pusRts - Address of short word that the UART RTS GPIO ++ * pin is returned in. ++ * [OUT] pusCts - Address of short word that the UART CTS GPIO ++ * pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, values are returned. ++ * BP_BOARD_ID_NOT_SET - Error, board id input string does not ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetRtsCtsUartGpios( unsigned short *pusRts, unsigned short *pusCts ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusRts = g_pCurrentBp->usGpioUartRts; ++ *pusCts = g_pCurrentBp->usGpioUartCts; ++ ++ if( g_pCurrentBp->usGpioUartRts != BP_NOT_DEFINED && ++ g_pCurrentBp->usGpioUartCts != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusRts = *pusCts = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetUartRtsCtsGpios */ ++ ++/************************************************************************** ++ * Name : BpGetAdslLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the ADSL ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetAdslLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedAdsl; ++ ++ if( g_pCurrentBp->usGpioLedAdsl != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetAdslLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetAdslFailLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the ADSL ++ * LED that is used when there is a DSL connection failure. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetAdslFailLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedAdslFail; ++ ++ if( g_pCurrentBp->usGpioLedAdslFail != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetAdslFailLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetWirelessLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the Wireless ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedWireless; ++ ++ if( g_pCurrentBp->usGpioLedWireless != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetWirelessLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetWirelessAntInUse ++ * ++ * Description: This function returns the antennas in use for wireless ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Antenna ++ * is in use. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessAntInUse( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usAntInUseWireless; ++ ++ if( g_pCurrentBp->usAntInUseWireless != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetWirelessAntInUse */ ++ ++/************************************************************************** ++ * Name : BpGetWirelessSesBtnGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the Wireless ++ * Ses Button. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessSesBtnGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioSesBtnWireless; ++ ++ if( g_pCurrentBp->usGpioSesBtnWireless != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetWirelessSesBtnGpio */ ++ ++/************************************************************************** ++ * Name : BpGetWirelessSesExtIntr ++ * ++ * Description: This function returns the external interrupt number for the ++ * Wireless Ses Button. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses ++ * external interrup is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessSesExtIntr( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usExtIntrSesBtnWireless; ++ ++ if( g_pCurrentBp->usExtIntrSesBtnWireless != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++ ++} /* BpGetWirelessSesExtIntr */ ++ ++/************************************************************************** ++ * Name : BpGetWirelessSesLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the Wireless ++ * Ses Led. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses ++ * Led GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessSesLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedSesWireless; ++ ++ if( g_pCurrentBp->usGpioLedSesWireless != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++ ++} /* BpGetWirelessSesLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetUsbLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the USB ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the USB LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetUsbLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedUsb; ++ ++ if( g_pCurrentBp->usGpioLedUsb != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetUsbLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetHpnaLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the HPNA ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the HPNA LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetHpnaLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedHpna; ++ ++ if( g_pCurrentBp->usGpioLedHpna != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetHpnaLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetWanDataLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the WAN Data ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the WAN Data LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWanDataLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedWanData; ++ ++ if( g_pCurrentBp->usGpioLedWanData != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetWanDataLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetPppLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the PPP ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the PPP LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetPppLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedPpp; ++ ++ if( g_pCurrentBp->usGpioLedPpp != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetPppLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetPppFailLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the PPP ++ * LED that is used when there is a PPP connection failure. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the PPP LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetPppFailLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedPppFail; ++ ++ if( g_pCurrentBp->usGpioLedPppFail != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetPppFailLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetBootloaderPowerOnLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the power ++ * on LED that is set by the bootloader. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the alarm LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetBootloaderPowerOnLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedBlPowerOn; ++ ++ if( g_pCurrentBp->usGpioLedBlPowerOn != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetBootloaderPowerOn */ ++ ++/************************************************************************** ++ * Name : BpGetBootloaderAlarmLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the alarm ++ * LED that is set by the bootloader. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the alarm LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetBootloaderAlarmLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedBlAlarm; ++ ++ if( g_pCurrentBp->usGpioLedBlAlarm != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetBootloaderAlarmLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetBootloaderResetCfgLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the reset ++ * configuration LED that is set by the bootloader. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the reset ++ * configuration LED GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetBootloaderResetCfgLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedBlResetCfg; ++ ++ if( g_pCurrentBp->usGpioLedBlResetCfg != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetBootloaderResetCfgLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetBootloaderStopLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the break ++ * into bootloader LED that is set by the bootloader. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the break into ++ * bootloader LED GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetBootloaderStopLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedBlStop; ++ ++ if( g_pCurrentBp->usGpioLedBlStop != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetBootloaderStopLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetVoipLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the VOIP ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the VOIP LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ * ++ * Note : The VoIP structure would allow for having one LED per DSP ++ * however, the board initialization function assumes only one ++ * LED per functionality (ie one LED for VoIP). Therefore in ++ * order to keep this tidy and simple we do not make usage of the ++ * one-LED-per-DSP function. Instead, we assume that the LED for ++ * VoIP is unique and associated with DSP 0 (always present on ++ * any VoIP platform). If changing this to a LED-per-DSP function ++ * then one need to update the board initialization driver in ++ * bcmdrivers\opensource\char\board\bcm963xx\impl1 ++ ***************************************************************************/ ++int BpGetVoipLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( 0 ); ++ ++ if( pDspInfo ) ++ { ++ *pusValue = pDspInfo->usGpioLedVoip; ++ ++ if( *pusValue != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_FOUND; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetVoipLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetWirelessExtIntr ++ * ++ * Description: This function returns the Wireless external interrupt number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the wireless ++ * external interrupt number is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessExtIntr( unsigned long *pulValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pulValue = g_pCurrentBp->usExtIntrWireless; ++ ++ if( g_pCurrentBp->usExtIntrWireless != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pulValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetWirelessExtIntr */ ++ ++/************************************************************************** ++ * Name : BpGetAdslDyingGaspExtIntr ++ * ++ * Description: This function returns the ADSL Dying Gasp external interrupt ++ * number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the ADSL Dying Gasp ++ * external interrupt number is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetAdslDyingGaspExtIntr( unsigned long *pulValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pulValue = g_pCurrentBp->usExtIntrAdslDyingGasp; ++ ++ if( g_pCurrentBp->usExtIntrAdslDyingGasp != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pulValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetAdslDyingGaspExtIntr */ ++ ++/************************************************************************** ++ * Name : BpGetVoipExtIntr ++ * ++ * Description: This function returns the VOIP external interrupt number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the VOIP ++ * external interrupt number is returned in. ++ * [IN] dspNum - Address of the DSP to query. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipExtIntr( unsigned char dspNum, unsigned long *pulValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum ); ++ ++ if( pDspInfo ) ++ { ++ *pulValue = pDspInfo->usExtIntrVoip; ++ ++ if( *pulValue != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pulValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_FOUND; ++ } ++ } ++ else ++ { ++ *pulValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetVoipExtIntr */ ++ ++/************************************************************************** ++ * Name : BpGetHpnaExtIntr ++ * ++ * Description: This function returns the HPNA external interrupt number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the HPNA ++ * external interrupt number is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetHpnaExtIntr( unsigned long *pulValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pulValue = g_pCurrentBp->usExtIntrHpna; ++ ++ if( g_pCurrentBp->usExtIntrHpna != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pulValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetHpnaExtIntr */ ++ ++/************************************************************************** ++ * Name : BpGetHpnaChipSelect ++ * ++ * Description: This function returns the HPNA chip select number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the HPNA ++ * chip select number is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetHpnaChipSelect( unsigned long *pulValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pulValue = g_pCurrentBp->usCsHpna; ++ ++ if( g_pCurrentBp->usCsHpna != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pulValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetHpnaChipSelect */ ++ ++/************************************************************************** ++ * Name : BpGetVoipChipSelect ++ * ++ * Description: This function returns the VOIP chip select number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the VOIP ++ * chip select number is returned in. ++ * [IN] dspNum - Address of the DSP to query. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipChipSelect( unsigned char dspNum, unsigned long *pulValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum ); ++ ++ if( pDspInfo ) ++ { ++ *pulValue = pDspInfo->usCsVoip; ++ ++ if( *pulValue != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pulValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_FOUND; ++ } ++ } ++ else ++ { ++ *pulValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetVoipChipSelect */ ++ +diff -urN linux.old/boardparms/bcm963xx/boardparms.h linux.dev/boardparms/bcm963xx/boardparms.h +--- linux.old/boardparms/bcm963xx/boardparms.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/boardparms/bcm963xx/boardparms.h 2006-08-25 00:39:38.000000000 +0200 +@@ -0,0 +1,766 @@ ++/* ++<:copyright-gpl ++ ++ Copyright 2003 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++ ++:> ++*/ ++/************************************************************************** ++ * File Name : boardparms.h ++ * ++ * Description: This file contains definitions and function prototypes for ++ * the BCM63xx board parameter access functions. ++ * ++ * Updates : 07/14/2003 Created. ++ ***************************************************************************/ ++ ++#if !defined(_BOARDPARMS_H) ++#define _BOARDPARMS_H ++ ++#if __cplusplus ++extern "C" { ++#endif ++ ++/* Return codes. */ ++#define BP_SUCCESS 0 ++#define BP_BOARD_ID_NOT_FOUND 1 ++#define BP_VALUE_NOT_DEFINED 2 ++#define BP_BOARD_ID_NOT_SET 3 ++ ++/* Values for BpGetSdramSize. */ ++#define BP_MEMORY_8MB_1_CHIP 0 ++#define BP_MEMORY_16MB_1_CHIP 1 ++#define BP_MEMORY_32MB_1_CHIP 2 ++#define BP_MEMORY_64MB_2_CHIP 3 ++#define BP_MEMORY_32MB_2_CHIP 4 ++#define BP_MEMORY_16MB_2_CHIP 5 ++ ++/* Values for EthernetMacInfo PhyType. */ ++#define BP_ENET_NO_PHY 0 ++#define BP_ENET_INTERNAL_PHY 1 ++#define BP_ENET_EXTERNAL_PHY 2 ++#define BP_ENET_EXTERNAL_SWITCH 3 ++ ++/* Values for EthernetMacInfo Configuration type. */ ++#define BP_ENET_CONFIG_MDIO 0 /* Internal PHY, External PHY, Switch+(no GPIO, no SPI, no MDIO Pseudo phy */ ++#define BP_ENET_CONFIG_GPIO 1 /* Bcm96345GW board + Bcm5325M/E */ ++#define BP_ENET_CONFIG_MDIO_PSEUDO_PHY 2 /* Bcm96348GW board + Bcm5325E */ ++#define BP_ENET_CONFIG_SPI_SSB_0 3 /* Bcm96348GW board + Bcm5325M/E */ ++#define BP_ENET_CONFIG_SPI_SSB_1 4 /* Bcm96348GW board + Bcm5325M/E */ ++#define BP_ENET_CONFIG_SPI_SSB_2 5 /* Bcm96348GW board + Bcm5325M/E */ ++#define BP_ENET_CONFIG_SPI_SSB_3 6 /* Bcm96348GW board + Bcm5325M/E */ ++ ++/* Values for EthernetMacInfo Reverse MII. */ ++#define BP_ENET_NO_REVERSE_MII 0 ++#define BP_ENET_REVERSE_MII 1 ++ ++/* Values for VoIPDSPInfo DSPType. */ ++#define BP_VOIP_NO_DSP 0 ++#define BP_VOIP_DSP 1 ++ ++ ++/* Values for GPIO pin assignments (AH = Active High, AL = Active Low). */ ++#define BP_ACTIVE_MASK 0x8000 ++#define BP_ACTIVE_HIGH 0x0000 ++#define BP_ACTIVE_LOW 0x8000 ++#define BP_GPIO_0_AH (0 | BP_ACTIVE_HIGH) ++#define BP_GPIO_0_AL (0 | BP_ACTIVE_LOW) ++#define BP_GPIO_1_AH (1 | BP_ACTIVE_HIGH) ++#define BP_GPIO_1_AL (1 | BP_ACTIVE_LOW) ++#define BP_GPIO_2_AH (2 | BP_ACTIVE_HIGH) ++#define BP_GPIO_2_AL (2 | BP_ACTIVE_LOW) ++#define BP_GPIO_3_AH (3 | BP_ACTIVE_HIGH) ++#define BP_GPIO_3_AL (3 | BP_ACTIVE_LOW) ++#define BP_GPIO_4_AH (4 | BP_ACTIVE_HIGH) ++#define BP_GPIO_4_AL (4 | BP_ACTIVE_LOW) ++#define BP_GPIO_5_AH (5 | BP_ACTIVE_HIGH) ++#define BP_GPIO_5_AL (5 | BP_ACTIVE_LOW) ++#define BP_GPIO_6_AH (6 | BP_ACTIVE_HIGH) ++#define BP_GPIO_6_AL (6 | BP_ACTIVE_LOW) ++#define BP_GPIO_7_AH (7 | BP_ACTIVE_HIGH) ++#define BP_GPIO_7_AL (7 | BP_ACTIVE_LOW) ++#define BP_GPIO_8_AH (8 | BP_ACTIVE_HIGH) ++#define BP_GPIO_8_AL (8 | BP_ACTIVE_LOW) ++#define BP_GPIO_9_AH (9 | BP_ACTIVE_HIGH) ++#define BP_GPIO_9_AL (9 | BP_ACTIVE_LOW) ++#define BP_GPIO_10_AH (10 | BP_ACTIVE_HIGH) ++#define BP_GPIO_10_AL (10 | BP_ACTIVE_LOW) ++#define BP_GPIO_11_AH (11 | BP_ACTIVE_HIGH) ++#define BP_GPIO_11_AL (11 | BP_ACTIVE_LOW) ++#define BP_GPIO_12_AH (12 | BP_ACTIVE_HIGH) ++#define BP_GPIO_12_AL (12 | BP_ACTIVE_LOW) ++#define BP_GPIO_13_AH (13 | BP_ACTIVE_HIGH) ++#define BP_GPIO_13_AL (13 | BP_ACTIVE_LOW) ++#define BP_GPIO_14_AH (14 | BP_ACTIVE_HIGH) ++#define BP_GPIO_14_AL (14 | BP_ACTIVE_LOW) ++#define BP_GPIO_15_AH (15 | BP_ACTIVE_HIGH) ++#define BP_GPIO_15_AL (15 | BP_ACTIVE_LOW) ++#define BP_GPIO_16_AH (16 | BP_ACTIVE_HIGH) ++#define BP_GPIO_16_AL (16 | BP_ACTIVE_LOW) ++#define BP_GPIO_17_AH (17 | BP_ACTIVE_HIGH) ++#define BP_GPIO_17_AL (17 | BP_ACTIVE_LOW) ++#define BP_GPIO_18_AH (18 | BP_ACTIVE_HIGH) ++#define BP_GPIO_18_AL (18 | BP_ACTIVE_LOW) ++#define BP_GPIO_19_AH (19 | BP_ACTIVE_HIGH) ++#define BP_GPIO_19_AL (19 | BP_ACTIVE_LOW) ++#define BP_GPIO_20_AH (20 | BP_ACTIVE_HIGH) ++#define BP_GPIO_20_AL (20 | BP_ACTIVE_LOW) ++#define BP_GPIO_21_AH (21 | BP_ACTIVE_HIGH) ++#define BP_GPIO_21_AL (21 | BP_ACTIVE_LOW) ++#define BP_GPIO_22_AH (22 | BP_ACTIVE_HIGH) ++#define BP_GPIO_22_AL (22 | BP_ACTIVE_LOW) ++#define BP_GPIO_23_AH (23 | BP_ACTIVE_HIGH) ++#define BP_GPIO_23_AL (23 | BP_ACTIVE_LOW) ++#define BP_GPIO_24_AH (24 | BP_ACTIVE_HIGH) ++#define BP_GPIO_24_AL (24 | BP_ACTIVE_LOW) ++#define BP_GPIO_25_AH (25 | BP_ACTIVE_HIGH) ++#define BP_GPIO_25_AL (25 | BP_ACTIVE_LOW) ++#define BP_GPIO_26_AH (26 | BP_ACTIVE_HIGH) ++#define BP_GPIO_26_AL (26 | BP_ACTIVE_LOW) ++#define BP_GPIO_27_AH (27 | BP_ACTIVE_HIGH) ++#define BP_GPIO_27_AL (27 | BP_ACTIVE_LOW) ++#define BP_GPIO_28_AH (28 | BP_ACTIVE_HIGH) ++#define BP_GPIO_28_AL (28 | BP_ACTIVE_LOW) ++#define BP_GPIO_29_AH (29 | BP_ACTIVE_HIGH) ++#define BP_GPIO_29_AL (29 | BP_ACTIVE_LOW) ++#define BP_GPIO_30_AH (30 | BP_ACTIVE_HIGH) ++#define BP_GPIO_30_AL (30 | BP_ACTIVE_LOW) ++#define BP_GPIO_31_AH (31 | BP_ACTIVE_HIGH) ++#define BP_GPIO_31_AL (31 | BP_ACTIVE_LOW) ++#define BP_GPIO_32_AH (32 | BP_ACTIVE_HIGH) ++#define BP_GPIO_32_AL (32 | BP_ACTIVE_LOW) ++#define BP_GPIO_33_AH (33 | BP_ACTIVE_HIGH) ++#define BP_GPIO_33_AL (33 | BP_ACTIVE_LOW) ++#define BP_GPIO_34_AH (34 | BP_ACTIVE_HIGH) ++#define BP_GPIO_34_AL (34 | BP_ACTIVE_LOW) ++#define BP_GPIO_35_AH (35 | BP_ACTIVE_HIGH) ++#define BP_GPIO_35_AL (35 | BP_ACTIVE_LOW) ++#define BP_GPIO_36_AH (36 | BP_ACTIVE_HIGH) ++#define BP_GPIO_36_AL (36 | BP_ACTIVE_LOW) ++ ++/* Values for external interrupt assignments. */ ++#define BP_EXT_INTR_0 0 ++#define BP_EXT_INTR_1 1 ++#define BP_EXT_INTR_2 2 ++#define BP_EXT_INTR_3 3 ++ ++/* Values for chip select assignments. */ ++#define BP_CS_0 0 ++#define BP_CS_1 1 ++#define BP_CS_2 2 ++#define BP_CS_3 3 ++ ++/* Value for GPIO and external interrupt fields that are not used. */ ++#define BP_NOT_DEFINED 0xffff ++#define BP_HW_DEFINED 0xfff0 ++#define BP_UNEQUIPPED 0xfff1 ++ ++/* Maximum size of the board id string. */ ++#define BP_BOARD_ID_LEN 16 ++ ++/* Maximum number of Ethernet MACs. */ ++#define BP_MAX_ENET_MACS 2 ++ ++/* Maximum number of VoIP DSPs. */ ++#define BP_MAX_VOIP_DSP 2 ++ ++/* Wireless Antenna Settings. */ ++#define BP_WLAN_ANT_MAIN 0 ++#define BP_WLAN_ANT_AUX 1 ++#define BP_WLAN_ANT_BOTH 3 ++ ++#if !defined(__ASSEMBLER__) ++ ++/* Information about an Ethernet MAC. If ucPhyType is BP_ENET_NO_PHY, ++ * then the other fields are not valid. ++ */ ++typedef struct EthernetMacInfo ++{ ++ unsigned char ucPhyType; /* BP_ENET_xxx */ ++ unsigned char ucPhyAddress; /* 0 to 31 */ ++ unsigned short usGpioPhySpiSck; /* GPIO pin or not defined */ ++ unsigned short usGpioPhySpiSs; /* GPIO pin or not defined */ ++ unsigned short usGpioPhySpiMosi; /* GPIO pin or not defined */ ++ unsigned short usGpioPhySpiMiso; /* GPIO pin or not defined */ ++ unsigned short usGpioPhyReset; /* GPIO pin or not defined (96348LV) */ ++ unsigned short numSwitchPorts; /* Number of PHY ports */ ++ unsigned short usConfigType; /* Configuration type */ ++ unsigned short usReverseMii; /* Reverse MII */ ++} ETHERNET_MAC_INFO, *PETHERNET_MAC_INFO; ++ ++ ++/* Information about VoIP DSPs. If ucDspType is BP_VOIP_NO_DSP, ++ * then the other fields are not valid. ++ */ ++typedef struct VoIPDspInfo ++{ ++ unsigned char ucDspType; ++ unsigned char ucDspAddress; ++ unsigned short usExtIntrVoip; ++ unsigned short usGpioVoipReset; ++ unsigned short usGpioVoipIntr; ++ unsigned short usGpioLedVoip; ++ unsigned short usCsVoip; ++ ++} VOIP_DSP_INFO; ++ ++ ++/************************************************************************** ++ * Name : BpSetBoardId ++ * ++ * Description: This function find the BOARD_PARAMETERS structure for the ++ * specified board id string and assigns it to a global, static ++ * variable. ++ * ++ * Parameters : [IN] pszBoardId - Board id string that is saved into NVRAM. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_FOUND - Error, board id input string does not ++ * have a board parameters configuration record. ++ ***************************************************************************/ ++int BpSetBoardId( char *pszBoardId ); ++ ++/************************************************************************** ++ * Name : BpGetBoardIds ++ * ++ * Description: This function returns all of the supported board id strings. ++ * ++ * Parameters : [OUT] pszBoardIds - Address of a buffer that the board id ++ * strings are returned in. Each id starts at BP_BOARD_ID_LEN ++ * boundary. ++ * [IN] nBoardIdsSize - Number of BP_BOARD_ID_LEN elements that ++ * were allocated in pszBoardIds. ++ * ++ * Returns : Number of board id strings returned. ++ ***************************************************************************/ ++int BpGetBoardIds( char *pszBoardIds, int nBoardIdsSize ); ++ ++/************************************************************************** ++ * Name : BpGetEthernetMacInfo ++ * ++ * Description: This function returns all of the supported board id strings. ++ * ++ * Parameters : [OUT] pEnetInfos - Address of an array of ETHERNET_MAC_INFO ++ * buffers. ++ * [IN] nNumEnetInfos - Number of ETHERNET_MAC_INFO elements that ++ * are pointed to by pEnetInfos. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ ***************************************************************************/ ++int BpGetEthernetMacInfo( PETHERNET_MAC_INFO pEnetInfos, int nNumEnetInfos ); ++ ++/************************************************************************** ++ * Name : BpGetSdramSize ++ * ++ * Description: This function returns a constant that describees the board's ++ * SDRAM type and size. ++ * ++ * Parameters : [OUT] pulSdramSize - Address of short word that the SDRAM size ++ * is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ ***************************************************************************/ ++int BpGetSdramSize( unsigned long *pulSdramSize ); ++ ++/************************************************************************** ++ * Name : BpGetPsiSize ++ * ++ * Description: This function returns the persistent storage size in K bytes. ++ * ++ * Parameters : [OUT] pulPsiSize - Address of short word that the persistent ++ * storage size is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ ***************************************************************************/ ++int BpGetPsiSize( unsigned long *pulPsiSize ); ++ ++/************************************************************************** ++ * Name : BpGetRj11InnerOuterPairGpios ++ * ++ * Description: This function returns the GPIO pin assignments for changing ++ * between the RJ11 inner pair and RJ11 outer pair. ++ * ++ * Parameters : [OUT] pusInner - Address of short word that the RJ11 inner pair ++ * GPIO pin is returned in. ++ * [OUT] pusOuter - Address of short word that the RJ11 outer pair ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, values are returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetRj11InnerOuterPairGpios( unsigned short *pusInner, ++ unsigned short *pusOuter ); ++ ++/************************************************************************** ++ * Name : BpGetPressAndHoldResetGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the press ++ * and hold reset button. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the press and hold ++ * reset button GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetPressAndHoldResetGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetVoipResetGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the VOIP ++ * Reset operation. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the VOIP reset ++ * GPIO pin is returned in. ++ * [IN] dspNum - Address of the DSP to query. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipResetGpio( unsigned char dspNum, unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetVoipIntrGpio ++ * ++ * Description: This function returns the GPIO pin assignment for VoIP interrupt. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the VOIP interrupt ++ * GPIO pin is returned in. ++ * [IN] dspNum - Address of the DSP to query. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipIntrGpio( unsigned char dspNum, unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetPcmciaResetGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the PCMCIA ++ * Reset operation. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the PCMCIA reset ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetPcmciaResetGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetUartRtsCtsGpios ++ * ++ * Description: This function returns the GPIO pin assignments for RTS and CTS ++ * UART signals. ++ * ++ * Parameters : [OUT] pusRts - Address of short word that the UART RTS GPIO ++ * pin is returned in. ++ * [OUT] pusCts - Address of short word that the UART CTS GPIO ++ * pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, values are returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetRtsCtsUartGpios( unsigned short *pusRts, unsigned short *pusCts ); ++ ++/************************************************************************** ++ * Name : BpGetAdslLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the ADSL ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetAdslLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetAdslFailLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the ADSL ++ * LED that is used when there is a DSL connection failure. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetAdslFailLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetWirelessLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the Wireless ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetWirelessAntInUse ++ * ++ * Description: This function returns the antennas in use for wireless ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Antenna ++ * is in use. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessAntInUse( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetWirelessSesBtnGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the Wireless ++ * Ses Button. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses ++ * Button GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessSesBtnGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetWirelessSesExtIntr ++ * ++ * Description: This function returns the external interrupt number for the ++ * Wireless Ses Button. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses ++ * external interrup is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessSesExtIntr( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetWirelessSesLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the Wireless ++ * Ses Led. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses ++ * Led GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessSesLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetUsbLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the USB ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the USB LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetUsbLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetHpnaLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the HPNA ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the HPNA LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetHpnaLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetWanDataLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the WAN Data ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the WAN Data LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWanDataLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetPppLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the PPP ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the PPP LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetPppLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetPppFailLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the PPP ++ * LED that is used when there is a PPP connection failure. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the PPP LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetPppFailLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetVoipLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the VOIP ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the VOIP LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetBootloaderPowerOnLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the power ++ * on LED that is set by the bootloader. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the alarm LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetBootloaderPowerOnLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetBootloaderAlarmLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the alarm ++ * LED that is set by the bootloader. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the alarm LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetBootloaderAlarmLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetBootloaderResetCfgLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the reset ++ * configuration LED that is set by the bootloader. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the reset ++ * configuration LED GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetBootloaderResetCfgLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetBootloaderStopLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the break ++ * into bootloader LED that is set by the bootloader. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the break into ++ * bootloader LED GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetBootloaderStopLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetWirelessExtIntr ++ * ++ * Description: This function returns the Wireless external interrupt number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the wireless ++ * external interrupt number is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessExtIntr( unsigned long *pulValue ); ++ ++/************************************************************************** ++ * Name : BpGetAdslDyingGaspExtIntr ++ * ++ * Description: This function returns the ADSL Dying Gasp external interrupt ++ * number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the ADSL Dying Gasp ++ * external interrupt number is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetAdslDyingGaspExtIntr( unsigned long *pulValue ); ++ ++/************************************************************************** ++ * Name : BpGetVoipExtIntr ++ * ++ * Description: This function returns the VOIP external interrupt number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the VOIP ++ * external interrupt number is returned in. ++ * [IN] dspNum - Address of the DSP to query. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipExtIntr( unsigned char dspNum, unsigned long *pulValue ); ++ ++/************************************************************************** ++ * Name : BpGetHpnaExtIntr ++ * ++ * Description: This function returns the HPNA external interrupt number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the HPNA ++ * external interrupt number is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetHpnaExtIntr( unsigned long *pulValue ); ++ ++/************************************************************************** ++ * Name : BpGetHpnaChipSelect ++ * ++ * Description: This function returns the HPNA chip select number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the HPNA ++ * chip select number is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetHpnaChipSelect( unsigned long *pulValue ); ++ ++/************************************************************************** ++ * Name : BpGetVoipChipSelect ++ * ++ * Description: This function returns the VOIP chip select number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the VOIP ++ * chip select number is returned in. ++ * [IN] dspNum - Address of the DSP to query. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipChipSelect( unsigned char dspNum, unsigned long *pulValue ); ++ ++#endif /* __ASSEMBLER__ */ ++ ++#if __cplusplus ++} ++#endif ++ ++#endif /* _BOARDPARMS_H */ ++ +diff -urN linux.old/boardparms/bcm963xx/Makefile linux.dev/boardparms/bcm963xx/Makefile +--- linux.old/boardparms/bcm963xx/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/boardparms/bcm963xx/Makefile 2006-08-25 00:39:38.000000000 +0200 +@@ -0,0 +1,16 @@ ++ ++ifeq ($(CONFIG_MIPS_BRCM),y) ++ ++# Linux ++obj-y += boardparms.o ++EXTRA_CFLAGS += -DCONFIG_BCM9$(BRCM_CHIP) ++-include $(TOPDIR)/Rules.make ++ ++else ++ ++# CFE ++BSPOBJS += boardparms.o ++ ++endif ++ ++ +diff -urN linux.old/include/asm-mips/bootinfo.h linux.dev/include/asm-mips/bootinfo.h +--- linux.old/include/asm-mips/bootinfo.h 2006-08-25 00:43:22.000000000 +0200 ++++ linux.dev/include/asm-mips/bootinfo.h 2006-08-25 00:39:38.000000000 +0200 +@@ -218,6 +218,14 @@ + #define MACH_GROUP_TITAN 22 /* PMC-Sierra Titan */ + #define MACH_TITAN_YOSEMITE 1 /* PMC-Sierra Yosemite */ + ++/* ++ * Valid machtype for group BRCM ++ */ ++#define MACH_GROUP_BRCM 23 /* Broadcom boards */ ++#define MACH_BCM96338 0 ++#define MACH_BCM96345 1 ++#define MACH_BCM96348 2 ++ + #define CL_SIZE COMMAND_LINE_SIZE + + const char *get_system_type(void); +diff -urN linux.old/include/asm-mips/cpu.h linux.dev/include/asm-mips/cpu.h +--- linux.old/include/asm-mips/cpu.h 2006-08-25 00:43:22.000000000 +0200 ++++ linux.dev/include/asm-mips/cpu.h 2006-08-25 00:39:38.000000000 +0200 +@@ -103,6 +103,13 @@ + + #define PRID_IMP_SR71000 0x0400 + ++/* These are the PRID's for when 23:16 == PRID_COMP_BROADCOM ++ */ ++ ++#define PRID_IMP_BCM6338 0x9000 ++#define PRID_IMP_BCM6345 0x8000 ++#define PRID_IMP_BCM6348 0x9100 ++ + /* + * Definitions for 7:0 on legacy processors + */ +@@ -200,7 +207,10 @@ + #define CPU_SB1A 62 + #define CPU_74K 63 + #define CPU_R14000 64 +-#define CPU_LAST 64 ++#define CPU_BCM6338 65 ++#define CPU_BCM6345 66 ++#define CPU_BCM6348 67 ++#define CPU_LAST 67 + + /* + * ISA Level encodings +diff -urN linux.old/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h linux.dev/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h +--- linux.old/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h 2006-08-25 11:27:40.000000000 +0200 +@@ -0,0 +1,36 @@ ++#ifndef __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H ++#define __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H ++ ++#define cpu_has_tlb 1 ++#define cpu_has_4kex 4 ++#define cpu_has_4ktlb 8 ++#define cpu_has_fpu 0 ++#define cpu_has_32fpr 0 ++#define cpu_has_counter 0x40 ++#define cpu_has_watch 0 ++#define cpu_has_mips16 0 ++#define cpu_has_divec 0x200 ++#define cpu_has_vce 0 ++#define cpu_has_cache_cdex_p 0 ++#define cpu_has_cache_cdex_s 0 ++#define cpu_has_prefetch 0x40000 ++#define cpu_has_mcheck 0x2000 ++#define cpu_has_ejtag 0x4000 ++#define cpu_has_llsc 0x10000 ++#define cpu_has_vtag_icache 0 ++#define cpu_has_dc_aliases 0 ++#define cpu_has_ic_fills_f_dc 0 ++ ++#define cpu_has_nofpuex 0 ++#define cpu_has_64bits 0 ++#define cpu_has_64bit_zero_reg 0 ++#define cpu_has_64bit_gp_regs 0 ++#define cpu_has_64bit_addresses 0 ++ ++#define cpu_has_subset_pcaches 0 ++ ++#define cpu_dcache_line_size() 16 ++#define cpu_icache_line_size() 16 ++#define cpu_scache_line_size() 0 ++ ++#endif /* __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H */ +diff -urN linux.old/include/asm-mips/mach-generic/param.h linux.dev/include/asm-mips/mach-generic/param.h +--- linux.old/include/asm-mips/mach-generic/param.h 2006-08-25 00:43:22.000000000 +0200 ++++ linux.dev/include/asm-mips/mach-generic/param.h 2006-08-25 00:39:38.000000000 +0200 +@@ -8,6 +8,6 @@ + #ifndef __ASM_MACH_GENERIC_PARAM_H + #define __ASM_MACH_GENERIC_PARAM_H + +-#define HZ 1000 /* Internal kernel timer frequency */ ++#define HZ 200 /* Internal kernel timer frequency */ + + #endif /* __ASM_MACH_GENERIC_PARAM_H */ +diff -urN linux.old/include/asm-mips/module.h linux.dev/include/asm-mips/module.h +--- linux.old/include/asm-mips/module.h 2006-08-25 00:43:22.000000000 +0200 ++++ linux.dev/include/asm-mips/module.h 2006-08-25 00:39:38.000000000 +0200 +@@ -113,6 +113,12 @@ + #define MODULE_PROC_FAMILY "RM9000 " + #elif defined CONFIG_CPU_SB1 + #define MODULE_PROC_FAMILY "SB1 " ++#elif defined CONFIG_CPU_BCM6338 ++#define MODULE_PROC_FAMILY "BCM6338 " ++#elif defined CONFIG_CPU_BCM6345 ++#define MODULE_PROC_FAMILY "BCM6345 " ++#elif defined CONFIG_CPU_BCM6348 ++#define MODULE_PROC_FAMILY "BCM6348 " + #else + #error MODULE_PROC_FAMILY undefined for your processor configuration + #endif |