openwrt/upstream - upstream openwrt

about summary refs log tree commit diff stats
path: root/target/linux/brcm47xx/generic
diff options
Diffstat (limited to 'target/linux/brcm47xx/generic')
0 files changed, 0 insertions, 0 deletions
>57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185
FC980C Alt Controller
=====================

This file and the entire QMK port of this board are based on its TMK implementation: https://github.com/tmk/tmk_keyboard/tree/master/keyboard/fc980c

------------

- Keyboard Maintainer: [Balz Guenat](https://github.com/BalzGuenat)
- Hardware Supported: Hasu's Alt Controller (see below)
- Hardware Availability: https://geekhack.org/index.php?topic=90104.0

Make example for this keyboard (after setting up your build environment):

    make fc980c:default

See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.

To flash the firmware, press the reset button on the controller and run:

    sudo make fc980c:default:dfu

-----------

This controller replaces original controller of Leopold FC980C and makes the keyboard programmable.

Discuss this here: https://geekhack.org/index.php?topic=90681.0

The keyboard is very similar electronically to its sibling model FC660C you can also refer this.

FC660C Alt Controller: https://geekhack.org/index.php?topic=88439.0


Actuation Point adjustment
--------------------------
You can adjust the actuation point of the keys by setting `ACTUATION_DEPTH_ADJUSTMENT` in `config.h`.
A value above 0 will result in a deeper, less sensitive actuation whereas a value above 1 will result in a more shallow, more sensitive actuation.
Be careful with this setting and use small values (+/-5).
See the `actuation-point-example` keymap for an example.
For more information, inspect the `fc660c_i2c` branch of TMK [here](https://github.com/tmk/tmk_keyboard/tree/fc660c_i2c).
Functionality for writing to the EEPROM has deliberately not been included to reduce the chance of people messing up their boards.


Hardware
--------
This project uses common and familiar ATmega32u4 but any microcontroller with 5V I/O will work.

- Schematic of Alt controller: schematic.pdf


Pin configuration
-----------------
Connector bridging between switch board and controller is Hirose DF14A-20P-1.25H.

    |Switch  |Controller |
    |  board |     board |Description                           |Function   |ATmega32u4
    |--------|-----------|--------------------------------------|-----------|------------
    | 1      |20         | FG                                   |FG         |GND
    | 2      |19         | GND                                  |GND        |GND
    | 3      |18         | GND                                  |GND        |GND
    | 4      |17         | 3.3V                                 |V33        |3.3V/5V
    | 5      |16         | 5V                                   |Vcc        |5V
    | 6      |15         |*Z6-TP1684-4-HYS(o)                   |KEY_HYS    |PC7
    | 7      |14         |*Z6-TP1684-2-KEY(i)                   |KEY_STATE  |PC6
    | 8      |13         |*Z7-AD5258-5-SCL(I2C)                 |I2C_SCL    |PD0(TWI)
    | 9      |12         |*Z7-AD5258-4-SDA(I2C)                 |I2C_SDA    |PD1(TWI)
    |10      |11         |*Z5/4-LV4051A-6-~EN(Lo:Z5 Hi:Z4)      |COL_bit3   |PB3
    |11      |10         |+Z3-LV07A-5 (LV4051A-9-C)             |COL_bit2   |PB2
    |12      | 9         |+Z3-LV07A-1 (LV4051A-10-B)            |COL_bit1   |PB1
    |13      | 8         |+Z3-LV07A-3 (LV4051A-11-A)            |COL_bit0   |PB0
    |14      | 7         |+Z1-LVC138A-3-C                       |ROW_bit2   |PD6
    |15      | 6         |+Z1-LVC138A-2-B                       |ROW_bit1   |PD5
    |16      | 5         |+Z1-LVC138A-1-A                       |ROW_bit0   |PD4
    |17      | 4         |+Z1-LVC138A-4-~G2A  Z6-TP1684-5-~EN   |KEY_ENABLE |PD7
    |18      | 3         |+Q4-NPN-B-NumLock_LED(Hi:On)          |LED_NUML   |PB4
    |19      | 2         |+Q3-NPN-B-CapsLock_LED(Hi:On)         |LED_CAPS   |PB5
    |20      | 1         |+Q2-NPN-B-ScrollLock_LED(Hi:On)       |LED_SCRL   |PB6

```
* 5V intferface
+ 3.3V interface
```


Switch matrix
-------------

    |    |0   |1   |2   |3   |4   |5   |6   |7   |8   |9   |A   |B   |C   |D   |E   |F   |
    |----|----|----|----|----|----|----|----|----|----|----|----|----|----|----|----|----|
    |   0|Left|RCtl|RAlt|    |Down|P.  |Righ|P0  |X   |LGui|`   |V   |    |Esc |M   |Spc |
    |   1|Fn  |.   |    |    |P1  |PEnt|P2  |P3  |Z   |LAlt|LCtl|C   |K   |    |N   |B   |
    |   2|'   |/   |,   |    |P4  |P+  |P5  |P6  |D   |A   |LSft|F   |J   |F1  |H   |G   |
    |   3|RSft|;   |L   |]   |Up  |    |    |    |S   |Q   |Caps|R   |I   |F3  |U   |T   |
    |   4|    |    |    |    |    |    |    |    |    |    |    |    |    |    |    |    |
    |   5|=   |-   |0   |\   |NLck|BSpc|P/  |P*  |3   |2   |    |4   |9   |F2  |7   |6   |
    |   6|[   |P   |O   |Ent |P7  |P-  |P8  |P9  |W   |1   |Tab |E   |8   |F4  |Y   |5   |
    |   7|F11 |F10 |F9  |F12 |Del |PgDn|Ins |PgUp|    |    |    |    |F8  |F5  |F7  |F6  |


Row designation
---------------
LV138A(Z1) selects one of 8 row lines and gives strobe by enabling with ~G2A(17).

    |ROW |bit0|bit1|bit2|
    |----|----|----|----|
    |0   |0   |0   |0   |
    |1   |1   |0   |0   |
    |2   |0   |1   |0   |
    |3   |1   |1   |0   |
    |4   |0   |0   |1   |
    |5   |1   |0   |1   |
    |6   |0   |1   |1   |
    |7   |1   |1   |1   |


Column designation
------------------
LV4051A(Z4, Z5) select one of 16 column lines to sense capacitance of switches.

    |COL |bit0|bit1|bit2|bit3|
    |----|----|----|----|----|
    |0   |0   |0   |0   |0   |
    |1   |1   |0   |0   |0   |
    |2   |0   |1   |0   |0   |
    |3   |1   |1   |0   |0   |
    |4   |0   |0   |1   |0   |
    |5   |1   |0   |1   |0   |
    |6   |0   |1   |1   |0   |
    |7   |1   |1   |1   |0   |
    |8   |0   |0   |0   |1   |
    |9   |1   |0   |0   |1   |
    |A   |0   |1   |0   |1   |
    |B   |1   |1   |0   |1   |
    |C   |0   |0   |1   |1   |
    |D   |1   |0   |1   |1   |
    |E   |0   |1   |1   |1   |
    |F   |1   |1   |1   |1   |


Firmware
--------
Just `make` to build firmware. And consult with wiki for further information.

- https://github.com/tmk/tmk_keyboard/tree/master/keyboard/fc660c
- https://github.com/tmk/tmk_keyboard/wiki


Datasheets
----------
- Hirose DF14A-20P-1.25H: http://www.mouser.com/ds/2/185/DF14_catalog-939195.pdf
- LV07A: http://www.ti.com/lit/ds/symlink/sn74lv07a.pdf
- LV138A: http://www.ti.com/lit/ds/symlink/sn74lvc138a.pdf
- LV4051A: http://www.ti.com/lit/ds/symlink/sn74lv4051a.pdf
- AD5258: http://www.analog.com/media/en/technical-documentation/data-sheets/AD5258.pdf
- JST S5B-PH-SM4: http://www.jst-mfg.com/product/pdf/eng/ePH.pdf
- Hirose UX60SC-MB-5S8: https://www.hirose.com/product/en/products/UX/UX60SC-MB-5S8%2880%29/
- Tr(E42) for LED?: http://www.bklighting.com/cimages/specs-758.pdf
- TYU TU1252WNR-05S: http://php2.twinner.com.tw/files/goodjob/TY1252series.pdf


3.3V power supply
-----------------
LV07A and LVC138A are 5V-tolerant and can be powered with 5V, the keyboard will work only with 5V power supply. It may not be completely safe to operate LV138A with 5V Vcc, its datasheet says:

> Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.


Digipot AD5258
--------------
Controller can operate AD5258 via I2C to change actuation point of keys. This may make keyboard unusable accidentally and it will be difficult to recovery in some situation. For safety firmware doesn't support it at this point, though.

Lower value of RDAC register causes shallower actuation point.


USB connector board
-------------------
The keyboard has USB receptacle on small separate 1.0mm-thick PCB. USB receptacle is Hirose UX60SC-MB-5S8 while wire-to-PCB connector is TYU TU1252WNR-05S.

http://i.imgur.com/Nucn6h9.jpg


Resources
---------
- Pics: http://imgur.com/a/HhyIq

context:
space:
mode: