diff options
Diffstat (limited to 'target/linux/brcm47xx/base-files')
12 files changed, 461 insertions, 0 deletions
diff --git a/target/linux/brcm47xx/base-files/etc/diag.sh b/target/linux/brcm47xx/base-files/etc/diag.sh new file mode 100644 index 0000000000..3b08554c64 --- /dev/null +++ b/target/linux/brcm47xx/base-files/etc/diag.sh @@ -0,0 +1,28 @@ +#!/bin/sh +# Copyright (C) 2006 OpenWrt.org + +set_led() { + local led="$1" + local state="$2" + [ -f "/proc/diag/led/$1" ] && echo "$state" > "/proc/diag/led/$1" +} + +set_state() { + case "$1" in + preinit) + set_led dmz 1 + set_led diag 1 + set_led power 0 + ;; + failsafe) + set_led diag f + set_led power f + set_led dmz f + ;; + done) + set_led dmz 0 + set_led diag 0 + set_led power 1 + ;; + esac +} diff --git a/target/linux/brcm47xx/base-files/etc/init.d/netconfig b/target/linux/brcm47xx/base-files/etc/init.d/netconfig new file mode 100755 index 0000000000..d7839b6b49 --- /dev/null +++ b/target/linux/brcm47xx/base-files/etc/init.d/netconfig @@ -0,0 +1,248 @@ +#!/bin/sh /etc/rc.common +# Copyright (C) 2006 OpenWrt.org + +START=05 + +start() { + [ -e /etc/config/network ] && { + local batch + + config_cb() { + case "$1" in + switch) + option_cb() { + case "$1" in + vlan[0-9]|vlan1[0-5]) + local id="${1#vlan}" + local ports="${2%\*}" + append batch "delete network.eth0.${1}${N}" + append batch "set network.eth0_${id}=switch_vlan${N}" + append batch "set network.eth0_${id}.device=eth0${N}" + append batch "set network.eth0_${id}.vlan=${id}${N}" + append batch "set network.eth0_${id}.ports='${ports}'${N}" + ;; + esac + } + ;; + switch_vlan) + option_cb() { :; } + batch="" + ;; + esac + } + + config_load network + + [ -n "$batch" ] && { + logger -t netconfig "migrating switch config to new format ..." + echo "$batch${N}commit network" | uci batch + } + + exit 0 + } + + mkdir -p /etc/config + + ( + if grep -E 'mtd0: 000(6|a)0000' /proc/mtd 2>&- >&-; then + # WGT634u + echo boardtype=wgt634u + else + strings "$(find_mtd_part nvram)" + fi + ) | awk ' + function p(cfgname, name) { + if (c[name] != "") print " option " cfgname " \"" c[name] "\"" + } + + function vlan(id, name) { + if (c[name] != "") { + print "config switch_vlan eth0_" id + print " option device \"eth0\"" + print " option vlan " id + print " option ports \"" c[name] "\"" + print "" + } + } + + function macinc(mac, maca, i, result) { + split(mac, maca, ":") + for (i = 1; i <= 6; i++) maca[i] = "0x" maca[i] + if (++maca[6] > 0xff) { + maca[5]++ + maca[6] = 0 + } + for (i = 1; i <= 6; i++) { + if (i != 1) result = result ":" + result = result sprintf("%02x", maca[i]) + } + return result + } + + BEGIN { + FS="=" + c["lan_ifname"]="eth0.0" + c["wan_ifname"]="eth0.1" + c["vlan0ports"]="1 2 3 4 5" + c["vlan1ports"]="0 5" + getline < "/proc/diag/model" + model=$0 + for (i = 0; i < 6; i++) { + if (mac_check != "") mac_check = mac_check ":" + mac_check = mac_check "[0-9a-fA-F][0-9a-fA-F]" + } + } + + ($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") || ($1 ~ /macaddr/) { + nvram[$1] = $2 + } + + END { + if ((model == "ASUS WL-HDD") || (model == "ASUS WL-300g") || (model == "Linksys WAP54G V1")) { + c["wan_ifname"] = "" + c["lan_ifname"] = "eth1" + } + if (model == "ASUS WL-330gE") { + c["wan_ifname"] = "" + c["lan_ifname"] = "eth0" + c["vlan0ports"] = "" + c["vlan1ports"] = "" + } + if ((model == "ASUS WL-500g") || (model == "Microsoft MN-700")) { + c["wan_ifname"] = "eth1" + c["lan_ifname"] = "eth0" + } + if ((model == "ASUS WL-500g Premium V2") || (model == "Dell TrueMobile 2300 v2") || (model == "Buffalo WHR-G125")) { + c["vlan0ports"] = "0 1 2 3 5" + c["vlan1ports"] = "4 5" + } + if (model == "Dell TrueMobile 2300") { + c["lan_ifname"] = "eth0" + c["wan_ifname"] = "eth1" + c["vlan0ports"] = "0 1 2 3 4 5u" + c["vlan1ports"] = "" + } + if (nvram["boardtype"] == "bcm94710r4") { + # Toshiba WRC-1000 + c["lan_ifname"] = "eth0" + c["wan_ifname"] = "eth1" + } + if ((nvram["boardtype"] == "wgt634u") || (nvram["boardtype"] == "0x0467")) { + c["vlan0ports"] = "0 1 2 3 5" + c["vlan1ports"] = "4 5" + } + if ((nvram["boardtype"] == "0x042f") || (nvram["boardtype"] == "0x0472")) { + if (nvram["boardnum"] == "45") { + # WL-500gP + c["vlan0ports"] = "1 2 3 4 5" + c["vlan1ports"] = "0 5" + } else { + # Generic BCM94704 + c["vlan0ports"] = "0 1 2 3 4 5u" + c["vlan1ports"] = "" + c["lan_ifname"] = "eth0" + c["wan_ifname"] = "eth1" + + # MAC addresses on 4704 tend to be screwed up. Add a workaround here + if (nvram["et0macaddr"] ~ mac_check) { + c["lan_macaddr"] = nvram["et0macaddr"] + c["wan_macaddr"] = macinc(c["lan_macaddr"]) + } + } + } + # Buffalo WBR-B11 and Buffalo WBR-G54 + if (nvram["boardtype"] == "bcm94710ap") { + c["vlan0ports"] = "0 1 2 3 4 5u" + c["vlan1ports"] = "" + c["lan_ifname"] = "eth0" + c["wan_ifname"] = "eth1" + } + # generic broadcom 4705/4785 processor with 5397 switch? + # EXCEPT Linksys WRT300N V1.1 + if ((nvram["boardtype"] == "0x478") && \ + (model != "Linksys WRT300N V1.1")) { + c["vlan0ports"] = "1 2 3 4 8*" + c["vlan1ports"] = "0 8" + } + + # WAP54G + if ((nvram["boardnum"] == "2") || \ + (nvram["boardnum"] == "1024")) { + c["lan_ifname"]="eth0" + c["wan_ifname"]="" + } + + # Sitecom WL-105b + if ((nvram["boardum"] == "2") && \ + (nvram["GemtekPmonVer"] == "1")) { + c["lan_ifname"]="eth0" + c["wan_ifname"]="" + } + + # ASUS WL-700gE + # These are actually same as defaults above. For some reason this script applies + # Generic BCM94704 settings instead so we revert to proper settings here. + # Hopefully someone will fix this properly soon. + if (model == "ASUS WL-700gE") { + c["lan_ifname"]="eth0.0" + c["wan_ifname"]="eth0.1" + c["vlan0ports"]="1 2 3 4 5" + c["vlan1ports"]="0 5" + } + + if (model == "Motorola WR850G V2/V3") { + c["vlan0ports"]="0 1 2 3 5" + c["vlan1ports"]="4 5" + } + if (model == "ASUS WL-500W") { + c["lan_ifname"] = "eth0" + c["wan_ifname"] = "eth1" + c["vlan0ports"] = "0 1 2 3 4 5u" + c["vlan1ports"] = "" + } + if (model == "OvisLink WL-1600GL") { + c["lan_ifname"] = "eth0.0" + c["wan_ifname"] = "eth0.1" + c["vlan0ports"] = "0 1 2 3 5" + c["vlan1ports"] = "4 5" + } + + if (c["vlan0ports"] || c["vlan1ports"]) { + print "#### VLAN configuration " + print "config switch eth0" + print " option enable 1" + print "" + vlan(0, "vlan0ports") + vlan(1, "vlan1ports") + } + print "#### Loopback configuration" + print "config interface loopback" + print " option ifname \"lo\"" + print " option proto static" + print " option ipaddr 127.0.0.1" + print " option netmask 255.0.0.0" + print "" + print "" + print "#### LAN configuration" + print "config interface lan" + print " option type bridge" + p("ifname", "lan_ifname") + p("macaddr", "lan_macaddr") + print " option proto static" + print " option ipaddr 192.168.1.1" + print " option netmask 255.255.255.0" + print "" + print "" + if (c["wan_ifname"]) { + print "#### WAN configuration" + print "config interface wan" + p("ifname", "wan_ifname") + p("macaddr", "wan_macaddr") + print " option proto dhcp" + } else { + print "#### WAN configuration (disabled)" + print "#config interface wan" + print "# option proto dhcp" + } + }' > /etc/config/network +} diff --git a/target/linux/brcm47xx/base-files/etc/init.d/wmacfixup b/target/linux/brcm47xx/base-files/etc/init.d/wmacfixup new file mode 100755 index 0000000000..ee1b752201 --- /dev/null +++ b/target/linux/brcm47xx/base-files/etc/init.d/wmacfixup @@ -0,0 +1,33 @@ +#!/bin/sh /etc/rc.common +# Copyright (C) 2010 OpenWrt.org + +START=41 + +boot() { + [ -d /sys/class/ieee80211 ] || exit + + commit=0 + + fixup_wmac() { + local cfg="$1" + local cfmac + + config_get cfmac "$cfg" macaddr + + [ "$cfmac" != "00:90:4c:5f:00:2a" ] || { + local nvmac="$(nvram get il0macaddr 2>/dev/null)" + [ -n "$nvmac" ] && [ "$nvmac != "$cfmac ] && { + uci set wireless.$cfg.macaddr="$nvmac" + commit=1 + } + } + } + + config_load wireless + config_foreach fixup_wmac wifi-device + + [ "$commit" = 1 ] && uci commit wireless +} + +start() { :; } +stop() { :; } diff --git a/target/linux/brcm47xx/base-files/lib/preinit/03_init_hotplug_failsafe_brcm b/target/linux/brcm47xx/base-files/lib/preinit/03_init_hotplug_failsafe_brcm new file mode 100644 index 0000000000..b0f4a4efa9 --- /dev/null +++ b/target/linux/brcm47xx/base-files/lib/preinit/03_init_hotplug_failsafe_brcm @@ -0,0 +1,9 @@ +#!/bin/sh + +init_hotplug_failsafe() { + echo '/sbin/hotplug.failsafe' > /proc/sys/kernel/hotplug +} + +boot_hook_add preinit_main init_hotplug_failsafe + + diff --git a/target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm b/target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm new file mode 100644 index 0000000000..3cd760e2db --- /dev/null +++ b/target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm @@ -0,0 +1,37 @@ +#!/bin/sh + +set_preinit_iface() { + ifname=eth0 + + insmod diag + + # hardware specific overrides + case "$(cat /proc/diag/model)" in + "Linksys WAP54G V1") ifname=eth1;; + "ASUS WL-HDD") ifname=eth1;; + "ASUS WL-300g") ifname=eth1;; + "ASUS (unknown, BCM4702)") ifname=eth1;; + "Sitecom WL-105b") ifname=eth1;; + esac + ifconfig $ifname 0.0.0.0 up +} + +check_module () { + module="$1"; shift; params="$*" + + insmod "$module" "$params" + sleep 1 + grep "^$module" /proc/modules + return $? +} + +init_iface() { + check_module tg3 + insmod switch-core + check_module switch-robo || check_module switch-adm || { + check_module bcm57xx activate_gpio=0x4 && cpu_port="8u*" + } || rmmod switch-core +} + +boot_hook_add preinit_main set_preinit_iface +boot_hook_add preinit_main init_iface diff --git a/target/linux/brcm47xx/base-files/lib/preinit/05_set_failsafe_switch_brcm b/target/linux/brcm47xx/base-files/lib/preinit/05_set_failsafe_switch_brcm new file mode 100644 index 0000000000..a93559f97b --- /dev/null +++ b/target/linux/brcm47xx/base-files/lib/preinit/05_set_failsafe_switch_brcm @@ -0,0 +1,15 @@ +#!/bin/sh + +failsafe_ip() { + [ -d /proc/switch/eth0 ] && [ "$ifname" = "eth0" ] && { + ifconfig eth0 0.0.0.0 down + echo "0 1 2 3 4 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports + } + + [ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && { + ifconfig $pi_ifname $pi_ip netmask $pi_netmask broadcast $pi_broadcast up + } +} + +boot_hook_add failsafe failsafe_ip + diff --git a/target/linux/brcm47xx/base-files/lib/preinit/15_mount_proc_brcm b/target/linux/brcm47xx/base-files/lib/preinit/15_mount_proc_brcm new file mode 100644 index 0000000000..fd5add16a5 --- /dev/null +++ b/target/linux/brcm47xx/base-files/lib/preinit/15_mount_proc_brcm @@ -0,0 +1,6 @@ +#!/bin/sh + +do_mount_procfs() { + mount none /proc -t proc +} + diff --git a/target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm b/target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm new file mode 100644 index 0000000000..fdc7c71ca7 --- /dev/null +++ b/target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm @@ -0,0 +1,39 @@ +#!/bin/sh + +port_net_echo() { + [ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && { + if [ "$pi_preinit_net_messages" = "y" ] || [ "$pi_failsafe_net_message" = "true" ] && [ "$pi_preinit_no_failsafe_netmsg" != "y" ]; then + netmsg $pi_broadcast "$1" + fi + } +} + +preinit_ip_deconfig() { + if [ -z "$pi_ifname" ]; then + ifconfig $ifname 0.0.0.0 down + else + grep -q "$pi_ifname" /proc/net/dev && { + ifconfig $pi_ifname 0.0.0.0 down + } + fi +} + +preinit_net_echo() { + preinit_ip + + [ -d /proc/switch/eth0 ] && [ "$pi_ifname" = "eth0" ] && { + echo 1 > /proc/switch/eth0/reset + + # this would be easier if we blasted the message across all ports + # but we don't want packets leaking across interfaces + for port in $(seq 0 4); do { + echo "$port ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports + port_net_echo $1 + }; done + + echo "0 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports + + } || port_net_echo $1 +} + + diff --git a/target/linux/brcm47xx/base-files/lib/preinit/20_failsafe_net_echo_brcm b/target/linux/brcm47xx/base-files/lib/preinit/20_failsafe_net_echo_brcm new file mode 100644 index 0000000000..f030cb2837 --- /dev/null +++ b/target/linux/brcm47xx/base-files/lib/preinit/20_failsafe_net_echo_brcm @@ -0,0 +1,12 @@ +#!/bin/sh + +indicate_failsafe() { + preinit_net_echo() { + port_net_echo $1 + } + echo "- failsafe -" + preinit_net_echo "Entering Failsafe!\n" + indicate_failsafe_led +} + + diff --git a/target/linux/brcm47xx/base-files/lib/preinit/20_failsafe_set_boot_wait_brcm b/target/linux/brcm47xx/base-files/lib/preinit/20_failsafe_set_boot_wait_brcm new file mode 100644 index 0000000000..da721b8484 --- /dev/null +++ b/target/linux/brcm47xx/base-files/lib/preinit/20_failsafe_set_boot_wait_brcm @@ -0,0 +1,14 @@ +#!/bin/sh + +. /etc/functions.sh + +set_boot_wait() { + [ -x "/usr/sbin/nvram" ] && { + [ "$(nvram get boot_wait)" != "on" ] && { + nvram set boot_wait=on + nvram commit + } + } +} + +boot_hook_add failsafe set_boot_wait diff --git a/target/linux/brcm47xx/base-files/lib/upgrade/platform.sh b/target/linux/brcm47xx/base-files/lib/upgrade/platform.sh new file mode 100644 index 0000000000..9921cf571a --- /dev/null +++ b/target/linux/brcm47xx/base-files/lib/upgrade/platform.sh @@ -0,0 +1,16 @@ +PART_NAME=linux + +platform_check_image() { + [ "$ARGC" -gt 1 ] && return 1 + + case "$(get_magic_word "$1")" in + # .trx files + 4844) return 0;; + *) + echo "Invalid image type. Please use only .trx files" + return 1 + ;; + esac +} + +# use default for platform_do_upgrade() diff --git a/target/linux/brcm47xx/base-files/sbin/hotplug.failsafe b/target/linux/brcm47xx/base-files/sbin/hotplug.failsafe new file mode 100755 index 0000000000..0544339de8 --- /dev/null +++ b/target/linux/brcm47xx/base-files/sbin/hotplug.failsafe @@ -0,0 +1,4 @@ +#!/bin/sh +case "$1" in + button) kill -USR1 1;; +esac |