diff options
Diffstat (limited to 'target/linux/brcm2708/patches-3.10/0003-bcm2708-watchdog-driver.patch')
| -rw-r--r-- | target/linux/brcm2708/patches-3.10/0003-bcm2708-watchdog-driver.patch | 426 |
1 files changed, 426 insertions, 0 deletions
diff --git a/target/linux/brcm2708/patches-3.10/0003-bcm2708-watchdog-driver.patch b/target/linux/brcm2708/patches-3.10/0003-bcm2708-watchdog-driver.patch new file mode 100644 index 0000000000..be05d8396d --- /dev/null +++ b/target/linux/brcm2708/patches-3.10/0003-bcm2708-watchdog-driver.patch @@ -0,0 +1,426 @@ +From dd611b3364087514ef5fc59c6106d8924d2a2a30 Mon Sep 17 00:00:00 2001 +From: popcornmix <popcornmix@gmail.com> +Date: Wed, 1 May 2013 19:54:32 +0100 +Subject: [PATCH 003/174] bcm2708 watchdog driver + +Signed-off-by: popcornmix <popcornmix@gmail.com> +--- + drivers/watchdog/Kconfig | 6 + + drivers/watchdog/Makefile | 1 + + drivers/watchdog/bcm2708_wdog.c | 385 ++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 392 insertions(+) + create mode 100644 drivers/watchdog/bcm2708_wdog.c + +--- a/drivers/watchdog/Kconfig ++++ b/drivers/watchdog/Kconfig +@@ -391,6 +391,12 @@ config RETU_WATCHDOG + To compile this driver as a module, choose M here: the + module will be called retu_wdt. + ++config BCM2708_WDT ++ tristate "BCM2708 Watchdog" ++ depends on ARCH_BCM2708 ++ help ++ Enables BCM2708 watchdog support. ++ + # AVR32 Architecture + + config AT32AP700X_WDT +--- a/drivers/watchdog/Makefile ++++ b/drivers/watchdog/Makefile +@@ -54,6 +54,7 @@ obj-$(CONFIG_TS72XX_WATCHDOG) += ts72xx_ + obj-$(CONFIG_IMX2_WDT) += imx2_wdt.o + obj-$(CONFIG_UX500_WATCHDOG) += ux500_wdt.o + obj-$(CONFIG_RETU_WATCHDOG) += retu_wdt.o ++obj-$(CONFIG_BCM2708_WDT) += bcm2708_wdog.o + + # AVR32 Architecture + obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o +--- /dev/null ++++ b/drivers/watchdog/bcm2708_wdog.c +@@ -0,0 +1,385 @@ ++/* ++ * Broadcom BCM2708 watchdog driver. ++ * ++ * (c) Copyright 2010 Broadcom Europe Ltd ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version ++ * 2 of the License, or (at your option) any later version. ++ * ++ * BCM2708 watchdog driver. Loosely based on wdt driver. ++ */ ++ ++#include <linux/interrupt.h> ++#include <linux/module.h> ++#include <linux/moduleparam.h> ++#include <linux/types.h> ++#include <linux/miscdevice.h> ++#include <linux/watchdog.h> ++#include <linux/fs.h> ++#include <linux/ioport.h> ++#include <linux/notifier.h> ++#include <linux/reboot.h> ++#include <linux/init.h> ++#include <linux/io.h> ++#include <linux/uaccess.h> ++#include <mach/platform.h> ++ ++#include <asm/system.h> ++ ++#define SECS_TO_WDOG_TICKS(x) ((x) << 16) ++#define WDOG_TICKS_TO_SECS(x) ((x) >> 16) ++ ++static unsigned long wdog_is_open; ++static uint32_t wdog_ticks; /* Ticks to load into wdog timer */ ++static char expect_close; ++ ++/* ++ * Module parameters ++ */ ++ ++#define WD_TIMO 10 /* Default heartbeat = 60 seconds */ ++static int heartbeat = WD_TIMO; /* Heartbeat in seconds */ ++ ++module_param(heartbeat, int, 0); ++MODULE_PARM_DESC(heartbeat, ++ "Watchdog heartbeat in seconds. (0 < heartbeat < 65536, default=" ++ __MODULE_STRING(WD_TIMO) ")"); ++ ++static int nowayout = WATCHDOG_NOWAYOUT; ++module_param(nowayout, int, 0); ++MODULE_PARM_DESC(nowayout, ++ "Watchdog cannot be stopped once started (default=" ++ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); ++ ++static DEFINE_SPINLOCK(wdog_lock); ++ ++/** ++ * Start the watchdog driver. ++ */ ++ ++static int wdog_start(unsigned long timeout) ++{ ++ uint32_t cur; ++ unsigned long flags; ++ spin_lock_irqsave(&wdog_lock, flags); ++ ++ /* enable the watchdog */ ++ iowrite32(PM_PASSWORD | (timeout & PM_WDOG_TIME_SET), ++ __io_address(PM_WDOG)); ++ cur = ioread32(__io_address(PM_RSTC)); ++ iowrite32(PM_PASSWORD | (cur & PM_RSTC_WRCFG_CLR) | ++ PM_RSTC_WRCFG_FULL_RESET, __io_address(PM_RSTC)); ++ ++ spin_unlock_irqrestore(&wdog_lock, flags); ++ return 0; ++} ++ ++/** ++ * Stop the watchdog driver. ++ */ ++ ++static int wdog_stop(void) ++{ ++ iowrite32(PM_PASSWORD | PM_RSTC_RESET, __io_address(PM_RSTC)); ++ printk(KERN_INFO "watchdog stopped\n"); ++ return 0; ++} ++ ++/** ++ * Reload counter one with the watchdog heartbeat. We don't bother ++ * reloading the cascade counter. ++ */ ++ ++static void wdog_ping(void) ++{ ++ wdog_start(wdog_ticks); ++} ++ ++/** ++ * @t: the new heartbeat value that needs to be set. ++ * ++ * Set a new heartbeat value for the watchdog device. If the heartbeat ++ * value is incorrect we keep the old value and return -EINVAL. If ++ * successful we return 0. ++ */ ++ ++static int wdog_set_heartbeat(int t) ++{ ++ if (t < 1 || t > WDOG_TICKS_TO_SECS(PM_WDOG_TIME_SET)) ++ return -EINVAL; ++ ++ heartbeat = t; ++ wdog_ticks = SECS_TO_WDOG_TICKS(t); ++ return 0; ++} ++ ++/** ++ * @file: file handle to the watchdog ++ * @buf: buffer to write (unused as data does not matter here ++ * @count: count of bytes ++ * @ppos: pointer to the position to write. No seeks allowed ++ * ++ * A write to a watchdog device is defined as a keepalive signal. ++ * ++ * if 'nowayout' is set then normally a close() is ignored. But ++ * if you write 'V' first then the close() will stop the timer. ++ */ ++ ++static ssize_t wdog_write(struct file *file, const char __user *buf, ++ size_t count, loff_t *ppos) ++{ ++ if (count) { ++ if (!nowayout) { ++ size_t i; ++ ++ /* In case it was set long ago */ ++ expect_close = 0; ++ ++ for (i = 0; i != count; i++) { ++ char c; ++ if (get_user(c, buf + i)) ++ return -EFAULT; ++ if (c == 'V') ++ expect_close = 42; ++ } ++ } ++ wdog_ping(); ++ } ++ return count; ++} ++ ++static int wdog_get_status(void) ++{ ++ unsigned long flags; ++ int status = 0; ++ spin_lock_irqsave(&wdog_lock, flags); ++ /* FIXME: readback reset reason */ ++ spin_unlock_irqrestore(&wdog_lock, flags); ++ return status; ++} ++ ++static uint32_t wdog_get_remaining(void) ++{ ++ uint32_t ret = ioread32(__io_address(PM_WDOG)); ++ return ret & PM_WDOG_TIME_SET; ++} ++ ++/** ++ * @file: file handle to the device ++ * @cmd: watchdog command ++ * @arg: argument pointer ++ * ++ * The watchdog API defines a common set of functions for all watchdogs ++ * according to their available features. We only actually usefully support ++ * querying capabilities and current status. ++ */ ++ ++static long wdog_ioctl(struct file *file, unsigned int cmd, unsigned long arg) ++{ ++ void __user *argp = (void __user *)arg; ++ int __user *p = argp; ++ int new_heartbeat; ++ int status; ++ int options; ++ uint32_t remaining; ++ ++ struct watchdog_info ident = { ++ .options = WDIOF_SETTIMEOUT| ++ WDIOF_MAGICCLOSE| ++ WDIOF_KEEPALIVEPING, ++ .firmware_version = 1, ++ .identity = "BCM2708", ++ }; ++ ++ switch (cmd) { ++ case WDIOC_GETSUPPORT: ++ return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; ++ case WDIOC_GETSTATUS: ++ status = wdog_get_status(); ++ return put_user(status, p); ++ case WDIOC_GETBOOTSTATUS: ++ return put_user(0, p); ++ case WDIOC_KEEPALIVE: ++ wdog_ping(); ++ return 0; ++ case WDIOC_SETTIMEOUT: ++ if (get_user(new_heartbeat, p)) ++ return -EFAULT; ++ if (wdog_set_heartbeat(new_heartbeat)) ++ return -EINVAL; ++ wdog_ping(); ++ /* Fall */ ++ case WDIOC_GETTIMEOUT: ++ return put_user(heartbeat, p); ++ case WDIOC_GETTIMELEFT: ++ remaining = WDOG_TICKS_TO_SECS(wdog_get_remaining()); ++ return put_user(remaining, p); ++ case WDIOC_SETOPTIONS: ++ if (get_user(options, p)) ++ return -EFAULT; ++ if (options & WDIOS_DISABLECARD) ++ wdog_stop(); ++ if (options & WDIOS_ENABLECARD) ++ wdog_start(wdog_ticks); ++ return 0; ++ default: ++ return -ENOTTY; ++ } ++} ++ ++/** ++ * @inode: inode of device ++ * @file: file handle to device ++ * ++ * The watchdog device has been opened. The watchdog device is single ++ * open and on opening we load the counters. ++ */ ++ ++static int wdog_open(struct inode *inode, struct file *file) ++{ ++ if (test_and_set_bit(0, &wdog_is_open)) ++ return -EBUSY; ++ /* ++ * Activate ++ */ ++ wdog_start(wdog_ticks); ++ return nonseekable_open(inode, file); ++} ++ ++/** ++ * @inode: inode to board ++ * @file: file handle to board ++ * ++ * The watchdog has a configurable API. There is a religious dispute ++ * between people who want their watchdog to be able to shut down and ++ * those who want to be sure if the watchdog manager dies the machine ++ * reboots. In the former case we disable the counters, in the latter ++ * case you have to open it again very soon. ++ */ ++ ++static int wdog_release(struct inode *inode, struct file *file) ++{ ++ if (expect_close == 42) { ++ wdog_stop(); ++ } else { ++ printk(KERN_CRIT ++ "wdt: WDT device closed unexpectedly. WDT will not stop!\n"); ++ wdog_ping(); ++ } ++ clear_bit(0, &wdog_is_open); ++ expect_close = 0; ++ return 0; ++} ++ ++/** ++ * @this: our notifier block ++ * @code: the event being reported ++ * @unused: unused ++ * ++ * Our notifier is called on system shutdowns. Turn the watchdog ++ * off so that it does not fire during the next reboot. ++ */ ++ ++static int wdog_notify_sys(struct notifier_block *this, unsigned long code, ++ void *unused) ++{ ++ if (code == SYS_DOWN || code == SYS_HALT) ++ wdog_stop(); ++ return NOTIFY_DONE; ++} ++ ++/* ++ * Kernel Interfaces ++ */ ++ ++ ++static const struct file_operations wdog_fops = { ++ .owner = THIS_MODULE, ++ .llseek = no_llseek, ++ .write = wdog_write, ++ .unlocked_ioctl = wdog_ioctl, ++ .open = wdog_open, ++ .release = wdog_release, ++}; ++ ++static struct miscdevice wdog_miscdev = { ++ .minor = WATCHDOG_MINOR, ++ .name = "watchdog", ++ .fops = &wdog_fops, ++}; ++ ++/* ++ * The WDT card needs to learn about soft shutdowns in order to ++ * turn the timebomb registers off. ++ */ ++ ++static struct notifier_block wdog_notifier = { ++ .notifier_call = wdog_notify_sys, ++}; ++ ++/** ++ * cleanup_module: ++ * ++ * Unload the watchdog. You cannot do this with any file handles open. ++ * If your watchdog is set to continue ticking on close and you unload ++ * it, well it keeps ticking. We won't get the interrupt but the board ++ * will not touch PC memory so all is fine. You just have to load a new ++ * module in 60 seconds or reboot. ++ */ ++ ++static void __exit wdog_exit(void) ++{ ++ misc_deregister(&wdog_miscdev); ++ unregister_reboot_notifier(&wdog_notifier); ++} ++ ++static int __init wdog_init(void) ++{ ++ int ret; ++ ++ /* Check that the heartbeat value is within it's range; ++ if not reset to the default */ ++ if (wdog_set_heartbeat(heartbeat)) { ++ wdog_set_heartbeat(WD_TIMO); ++ printk(KERN_INFO "bcm2708_wdog: heartbeat value must be " ++ "0 < heartbeat < %d, using %d\n", ++ WDOG_TICKS_TO_SECS(PM_WDOG_TIME_SET), ++ WD_TIMO); ++ } ++ ++ ret = register_reboot_notifier(&wdog_notifier); ++ if (ret) { ++ printk(KERN_ERR ++ "wdt: cannot register reboot notifier (err=%d)\n", ret); ++ goto out_reboot; ++ } ++ ++ ret = misc_register(&wdog_miscdev); ++ if (ret) { ++ printk(KERN_ERR ++ "wdt: cannot register miscdev on minor=%d (err=%d)\n", ++ WATCHDOG_MINOR, ret); ++ goto out_misc; ++ } ++ ++ printk(KERN_INFO "bcm2708 watchdog, heartbeat=%d sec (nowayout=%d)\n", ++ heartbeat, nowayout); ++ return 0; ++ ++out_misc: ++ unregister_reboot_notifier(&wdog_notifier); ++out_reboot: ++ return ret; ++} ++ ++module_init(wdog_init); ++module_exit(wdog_exit); ++ ++MODULE_AUTHOR("Luke Diamand"); ++MODULE_DESCRIPTION("Driver for BCM2708 watchdog"); ++MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); ++MODULE_ALIAS_MISCDEV(TEMP_MINOR); ++MODULE_LICENSE("GPL"); ++ |