diff options
Diffstat (limited to 'target/linux/bcm53xx/patches-5.10/038-v6.1-0001-ARM-dts-bcm53016-Add-devicetree-for-D-Link-DWL-8610A.patch')
| -rw-r--r-- | target/linux/bcm53xx/patches-5.10/038-v6.1-0001-ARM-dts-bcm53016-Add-devicetree-for-D-Link-DWL-8610A.patch | 165 |
1 files changed, 0 insertions, 165 deletions
diff --git a/target/linux/bcm53xx/patches-5.10/038-v6.1-0001-ARM-dts-bcm53016-Add-devicetree-for-D-Link-DWL-8610A.patch b/target/linux/bcm53xx/patches-5.10/038-v6.1-0001-ARM-dts-bcm53016-Add-devicetree-for-D-Link-DWL-8610A.patch deleted file mode 100644 index c02c80065b..0000000000 --- a/target/linux/bcm53xx/patches-5.10/038-v6.1-0001-ARM-dts-bcm53016-Add-devicetree-for-D-Link-DWL-8610A.patch +++ /dev/null @@ -1,165 +0,0 @@ -From 9f66e1dd82e3186aee95282657512ca2aef1afe0 Mon Sep 17 00:00:00 2001 -From: Linus Walleij <linus.walleij@linaro.org> -Date: Wed, 19 Oct 2022 21:34:49 +0200 -Subject: [PATCH] ARM: dts: bcm53016: Add devicetree for D-Link DWL-8610AP - -This adds a device tree for the BCM53016-based D-Link DWL-8610AP -access point wireless router. - -The TRX-format partitions had to be named "firmware" due to -an OpenWrt patch that only accepts parting such nodes if they -are named "firmware". - -Signed-off-by: Linus Walleij <linus.walleij@linaro.org> -Link: https://lore.kernel.org/r/20221019193449.3036010-2-linus.walleij@linaro.org -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/Makefile | 1 + - .../boot/dts/bcm53016-dlink-dwl-8610ap.dts | 131 ++++++++++++++++++ - 2 files changed, 132 insertions(+) - create mode 100644 arch/arm/boot/dts/bcm53016-dlink-dwl-8610ap.dts - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -133,6 +133,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ - bcm47094-netgear-r8500.dtb \ - bcm47094-phicomm-k3.dtb \ - bcm53015-meraki-mr26.dtb \ -+ bcm53016-dlink-dwl-8610ap.dtb \ - bcm53016-meraki-mr32.dtb \ - bcm94708.dtb \ - bcm94709.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/bcm53016-dlink-dwl-8610ap.dts -@@ -0,0 +1,131 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -+/dts-v1/; -+ -+#include "bcm4709.dtsi" -+#include "bcm5301x-nand-cs0-bch8.dtsi" -+#include <dt-bindings/leds/common.h> -+#include <dt-bindings/input/input.h> -+ -+/ { -+ model = "D-Link DWL-8610AP"; -+ compatible = "dlink,dwl-8610ap", "brcm,bcm53016", "brcm,bcm4708"; -+ -+ memory@0 { -+ device_type = "memory"; -+ /* 512 MB RAM in 2 x Macronix D9PSH chips */ -+ reg = <0x00000000 0x08000000>, -+ <0x88000000 0x08000000>; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ -+ power { -+ function = LED_FUNCTION_POWER; -+ color = <LED_COLOR_ID_GREEN>; -+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; -+ default-state = "on"; -+ }; -+ -+ diag { -+ /* Actually "diag" unclear what this means */ -+ function = LED_FUNCTION_INDICATOR; -+ color = <LED_COLOR_ID_RED>; -+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; -+ default-state = "on"; -+ linux,default-trigger = "heartbeat"; -+ }; -+ -+ wlan-2g { -+ function = LED_FUNCTION_WLAN; -+ color = <LED_COLOR_ID_GREEN>; -+ gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; -+ }; -+ -+ wlan-5g { -+ function = LED_FUNCTION_WLAN; -+ color = <LED_COLOR_ID_GREEN>; -+ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+ -+ gpio_keys { -+ compatible = "gpio-keys"; -+ -+ button-reset { -+ debounce-interval = <100>; -+ wakeup-source; -+ linux,code = <KEY_RESTART>; -+ label = "reset"; -+ /* This GPIO is actually stored in NVRAM, but it's not gonna change */ -+ gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+ -+ /* -+ * Flash memory at 0x1e000000-0x1fffffff -+ * Macronix 32 64KB blocks; total size 2MB, same that can be -+ * found attached to the spi_nor SPI controller. -+ */ -+ nvram@1e080000 { -+ compatible = "brcm,nvram"; -+ reg = <0x1e080000 0x00020000>; -+ -+ et0macaddr: et0macaddr { -+ }; -+ -+ et1macaddr: et1macaddr { -+ }; -+ }; -+}; -+ -+&gmac0 { -+ nvmem-cells = <&et0macaddr>; -+ nvmem-cell-names = "mac-address"; -+}; -+ -+&gmac1 { -+ nvmem-cells = <&et1macaddr>; -+ nvmem-cell-names = "mac-address"; -+}; -+ -+&spi_nor { -+ /* Serial SPI NOR Flash MX 25L1606E */ -+ status = "okay"; -+}; -+ -+&nandcs { -+ /* -+ * Spansion S34ML01G100TFI00 128 MB NAND Flash memory -+ * -+ * This ECC is a bit unorthodox but it is what the stock firmware -+ * is using, so to be able to mount the original partitions -+ * this is necessary. -+ */ -+ nand-ecc-strength = <5>; -+ partitions { -+ compatible = "fixed-partitions"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ /* This is named nflash1.trx in CFE */ -+ trx@0 { -+ label = "firmware"; -+ reg = <0x00000000 0x02800000>; -+ compatible = "brcm,trx"; -+ }; -+ -+ /* This is named nflash1.trx2 in CFE */ -+ trx2@2800000 { -+ label = "firmware2"; -+ reg = <0x02800000 0x02800000>; -+ compatible = "brcm,trx"; -+ }; -+ -+ /* This is named nflash1.rwfs in CFE */ -+ free@5000000 { -+ label = "free"; -+ reg = <0x05000000 0x03000000>; -+ }; -+ }; -+}; |