diff options
Diffstat (limited to 'target/linux/bcm53xx/patches-4.14/033-v4.19-0003-ARM-dts-BCM5301X-Add-support-for-Linksys-EA9500.patch')
| -rw-r--r-- | target/linux/bcm53xx/patches-4.14/033-v4.19-0003-ARM-dts-BCM5301X-Add-support-for-Linksys-EA9500.patch | 269 |
1 files changed, 269 insertions, 0 deletions
diff --git a/target/linux/bcm53xx/patches-4.14/033-v4.19-0003-ARM-dts-BCM5301X-Add-support-for-Linksys-EA9500.patch b/target/linux/bcm53xx/patches-4.14/033-v4.19-0003-ARM-dts-BCM5301X-Add-support-for-Linksys-EA9500.patch new file mode 100644 index 0000000000..701605a973 --- /dev/null +++ b/target/linux/bcm53xx/patches-4.14/033-v4.19-0003-ARM-dts-BCM5301X-Add-support-for-Linksys-EA9500.patch @@ -0,0 +1,269 @@ +From 2bebdfcdcd0feb58d5df419532a2cedc78a336d7 Mon Sep 17 00:00:00 2001 +From: Vivek Unune <npcomplete13@gmail.com> +Date: Mon, 18 Jun 2018 13:41:59 -0400 +Subject: [PATCH] ARM: dts: BCM5301X: Add support for Linksys EA9500 +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Hardware Info +------------- + +Processor - Broadcom BCM4709C0KFEBG dual-core @ 1.4 GHz +Switch - BCM53012 in BCM4709C0KFEBG & external BCM53125 +DDR3 RAM - 256 MB +Flash - 128 MB (Toshiba TC58BVG0S3HTA00) +2.4GHz - BCM4366 4×4 2.4/5G single chip 802.11ac SoC +Power Amp - Skyworks SE2623L 2.4 GHz power amp (x4) +5GHz x 2 - BCM4366 4×4 2.4/5G single chip 802.11ac SoC +Power Amp - PLX Technology PEX8603 3-lane, 3-port PCIe switch +Ports - 8 Ports, 1 WAN Ports +Antennas - 8 Antennas +Serial Port - @J6 [GND,TX,RX] (VCC NC) 115200 8n1 + +Tested with OpenWrt built with DSA driver and Kernel v4.14 + +Signed-off-by: Vivek Unune <npcomplete13@gmail.com> +Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> +--- + arch/arm/boot/dts/bcm47094-linksys-panamera.dts | 229 ++++++++++++++++++++++++ + 1 file changed, 229 insertions(+) + +--- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts ++++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts +@@ -31,6 +31,235 @@ + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + }; ++ ++ rfkill { ++ label = "WiFi"; ++ linux,code = <KEY_RFKILL>; ++ gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>; ++ }; ++ ++ reset { ++ label = "Reset"; ++ linux,code = <KEY_RESTART>; ++ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ ++ wps { ++ label = "bcm53xx:white:wps"; ++ gpios = <&chipcommon 22 GPIO_ACTIVE_LOW>; ++ }; ++ ++ usb2 { ++ label = "bcm53xx:green:usb2"; ++ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; ++ trigger-sources = <&ohci_port2>, <&ehci_port2>; ++ linux,default-trigger = "usbport"; ++ }; ++ ++ usb3 { ++ label = "bcm53xx:green:usb3"; ++ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; ++ trigger-sources = <&ohci_port1>, <&ehci_port1>, ++ <&xhci_port1>; ++ linux,default-trigger = "usbport"; ++ }; ++ ++ power { ++ label = "bcm53xx:white:power"; ++ gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ wifi-disabled { ++ label = "bcm53xx:amber:wifi-disabled"; ++ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; ++ }; ++ ++ wifi-enabled { ++ label = "bcm53xx:white:wifi-enabled"; ++ gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ bluebar1 { ++ label = "bcm53xx:white:bluebar1"; ++ gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ bluebar2 { ++ label = "bcm53xx:white:bluebar2"; ++ gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ bluebar3 { ++ label = "bcm53xx:white:bluebar3"; ++ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; ++ }; ++ ++ bluebar4 { ++ label = "bcm53xx:white:bluebar4"; ++ gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ bluebar5 { ++ label = "bcm53xx:white:bluebar5"; ++ gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ bluebar6 { ++ label = "bcm53xx:white:bluebar6"; ++ gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ bluebar7 { ++ label = "bcm53xx:white:bluebar7"; ++ gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ bluebar8 { ++ label = "bcm53xx:white:bluebar8"; ++ gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>; ++ }; ++ }; ++ ++ mdio-bus-mux { ++ /* BIT(9) = 1 => external mdio */ ++ mdio_ext: mdio@200 { ++ reg = <0x200>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; ++ }; ++ ++ mdio-mii-mux { ++ compatible = "mdio-mux-mmioreg"; ++ mdio-parent-bus = <&mdio_ext>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x1800c1c0 0x4>; ++ ++ /* BIT(6) = mdc, BIT(7) = mdio */ ++ mux-mask = <0xc0>; ++ ++ mdio-mii@0 { ++ /* Enable MII function */ ++ reg = <0x0>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ switch@0 { ++ compatible = "brcm,bcm53125"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; ++ reset-names = "robo_reset"; ++ reg = <0>; ++ dsa,member = <1 0>; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ reg = <0>; ++ label = "lan1"; ++ }; ++ ++ port@1 { ++ reg = <1>; ++ label = "lan5"; ++ }; ++ ++ port@2 { ++ reg = <2>; ++ label = "lan2"; ++ }; ++ ++ port@3 { ++ reg = <3>; ++ label = "lan6"; ++ }; ++ ++ port@4 { ++ reg = <4>; ++ label = "lan3"; ++ }; ++ ++ sw1_p8: port@8 { ++ reg = <8>; ++ ethernet = <&sw0_p0>; ++ label = "cpu"; ++ ++ fixed-link { ++ speed = <1000>; ++ full-duplex; ++ }; ++ }; ++ }; ++ }; ++ }; ++ }; ++}; ++ ++&usb2 { ++ vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>; ++}; ++ ++&usb3 { ++ vcc-gpio = <&chipcommon 14 GPIO_ACTIVE_HIGH>; ++}; ++ ++&srab { ++ compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab"; ++ status = "okay"; ++ dsa,member = <0 0>; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@1 { ++ reg = <1>; ++ label = "lan7"; ++ }; ++ ++ port@2 { ++ reg = <2>; ++ label = "lan4"; ++ }; ++ ++ port@3 { ++ reg = <3>; ++ label = "lan8"; ++ }; ++ ++ port@4 { ++ reg = <4>; ++ label = "wan"; ++ }; ++ ++ port@8 { ++ reg = <8>; ++ ethernet = <&gmac2>; ++ label = "cpu"; ++ ++ fixed-link { ++ speed = <1000>; ++ full-duplex; ++ }; ++ }; ++ ++ sw0_p0: port@0 { ++ reg = <0>; ++ label = "extsw"; ++ ++ fixed-link { ++ speed = <1000>; ++ full-duplex; ++ }; ++ }; + }; + }; + |