1 files changed, 0 insertions, 112 deletions
diff --git a/target/linux/bcm53xx/patches-4.14/032-v4.18-0004-ARM-dts-BCM5301X-Add-DT-for-Luxul-XWR-3150-V1.patch b/target/linux/bcm53xx/patches-4.14/032-v4.18-0004-ARM-dts-BCM5301X-Add-DT-for-Luxul-XWR-3150-V1.patch
deleted file mode 100644
index 4285a59a6d..0000000000
--- a/target/linux/bcm53xx/patches-4.14/032-v4.18-0004-ARM-dts-BCM5301X-Add-DT-for-Luxul-XWR-3150-V1.patch
+++ /dev/null
@@ -1,112 +0,0 @@
-From 2e2105a1578172eaf61e3b59a2c10c4fe04c21b9 Mon Sep 17 00:00:00 2001
-From: Dan Haab <riproute@gmail.com>
-Date: Fri, 4 May 2018 10:08:43 -0600
-Subject: [PATCH] ARM: dts: BCM5301X: Add DT for Luxul XWR-3150 V1
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Luxul XWR-3150 is a wireless router similar to the XWR-3100 except:
-1) It has more RAM
-2) Its NAND controller in running in BCH8 mode
-3) LAN ports LEDs are hardware controlled
-
-Signed-off-by: Dan Haab <dan.haab@luxul.com>
-Acked-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile                       |  1 +
- arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts | 77 ++++++++++++++++++++++++
- 2 files changed, 78 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -104,6 +104,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- 	bcm47094-luxul-abr-4500.dtb \
- 	bcm47094-luxul-xbr-4500.dtb \
- 	bcm47094-luxul-xwr-3100.dtb \
-+	bcm47094-luxul-xwr-3150-v1.dtb \
- 	bcm47094-netgear-r8500.dtb \
- 	bcm94708.dtb \
- 	bcm94709.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
-@@ -0,0 +1,77 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+/*
-+ * Copyright 2018 Luxul Inc.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm47094.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-+
-+/ {
-+	compatible = "luxul,xwr-3150-v1", "brcm,bcm47094", "brcm,bcm4708";
-+	model = "Luxul XWR-3150 V1";
-+
-+	chosen {
-+		bootargs = "earlycon";
-+	};
-+
-+	memory {
-+		reg = <0x00000000 0x08000000
-+		       0x88000000 0x18000000>;
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+
-+		power	{
-+			label = "bcm53xx:green:power";
-+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-+			linux,default-trigger = "default-on";
-+		};
-+
-+		usb3	{
-+			label = "bcm53xx:green:usb3";
-+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
-+					  <&xhci_port1>;
-+			linux,default-trigger = "usbport";
-+		};
-+
-+		status	{
-+			label = "bcm53xx:green:status";
-+			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-+			linux,default-trigger = "timer";
-+		};
-+
-+		2ghz {
-+			label = "bcm53xx:green:2ghz";
-+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		5ghz {
-+			label = "bcm53xx:green:5ghz";
-+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+
-+	gpio-keys {
-+		compatible = "gpio-keys";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		restart {
-+			label = "Reset";
-+			linux,code = <KEY_RESTART>;
-+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+};
-+
-+&usb3 {
-+	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
-+};
-+
-+&spi_nor {
-+	status = "okay";
-+};