1 files changed, 0 insertions, 87 deletions
diff --git a/target/linux/bcm27xx/patches-5.4/950-0756-overlays-Add-spi0-overlay-to-support-sc16is752.patch b/target/linux/bcm27xx/patches-5.4/950-0756-overlays-Add-spi0-overlay-to-support-sc16is752.patch
deleted file mode 100644
index afd760b8f3..0000000000
--- a/target/linux/bcm27xx/patches-5.4/950-0756-overlays-Add-spi0-overlay-to-support-sc16is752.patch
+++ /dev/null
@@ -1,87 +0,0 @@
-From b2998ffa15aabea3292159ca20973f45ed9cb4b0 Mon Sep 17 00:00:00 2001
-From: bjorn <beikeland@gmail.com>
-Date: Thu, 7 May 2020 05:11:43 +0200
-Subject: [PATCH] overlays: Add spi0 overlay to support sc16is752
-
-Signed-off-by: Bjorn <beikeland@gmail.com>
----
- arch/arm/boot/dts/overlays/Makefile           |  1 +
- arch/arm/boot/dts/overlays/README             |  8 ++++
- .../dts/overlays/sc16is752-spi0-overlay.dts   | 44 +++++++++++++++++++
- 3 files changed, 53 insertions(+)
- create mode 100644 arch/arm/boot/dts/overlays/sc16is752-spi0-overlay.dts
-
---- a/arch/arm/boot/dts/overlays/Makefile
-+++ b/arch/arm/boot/dts/overlays/Makefile
-@@ -143,6 +143,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
- 	rra-digidac1-wm8741-audio.dtbo \
- 	sc16is750-i2c.dtbo \
- 	sc16is752-i2c.dtbo \
-+	sc16is752-spi0.dtbo \
- 	sc16is752-spi1.dtbo \
- 	sdhost.dtbo \
- 	sdio.dtbo \
---- a/arch/arm/boot/dts/overlays/README
-+++ b/arch/arm/boot/dts/overlays/README
-@@ -2144,6 +2144,14 @@ Params: int_pin                 GPIO use
-         xtal                    On-board crystal frequency (default 14745600)
- 
- 
-+Name:   sc16is752-spi0
-+Info:   Overlay for the NXP SC16IS752 Dual UART with SPI Interface
-+        Enables the chip on SPI0.
-+Load:   dtoverlay=sc16is752-spi0,<param>=<val>
-+Params: int_pin                 GPIO used for IRQ (default 24)
-+        xtal                    On-board crystal frequency (default 14745600)
-+
-+
- Name:   sc16is752-spi1
- Info:   Overlay for the NXP SC16IS752 Dual UART with SPI Interface
-         Enables the chip on SPI1.
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/sc16is752-spi0-overlay.dts
-@@ -0,0 +1,44 @@
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+	compatible = "brcm,bcm2835";
-+
-+	fragment@0 {
-+		target = <&spi0>;
-+		__overlay__ {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			status = "okay";
-+
-+			sc16is752: sc16is752@0 {
-+				compatible = "nxp,sc16is752";
-+				reg = <0>; /* CE0 */
-+				clocks = <&sc16is752_clk>;
-+				interrupt-parent = <&gpio>;
-+				interrupts = <24 2>; /* IRQ_TYPE_EDGE_FALLING */
-+				#gpio-controller;
-+				#gpio-cells = <2>;
-+				spi-max-frequency = <4000000>;
-+
-+				sc16is752_clk: sc16is752_clk {
-+					compatible = "fixed-clock";
-+					#clock-cells = <0>;
-+					clock-frequency = <14745600>;
-+				};
-+			};
-+		};
-+	};
-+
-+	fragment@1 {
-+		target = <&spidev0>;
-+		__overlay__ {
-+			status = "disabled";
-+		};
-+	};
-+
-+	__overrides__ {
-+		int_pin = <&sc16is752>,"interrupts:0";
-+		xtal = <&sc16is752_clk>, "clock-frequency:0";
-+	};
-+};