diff options
Diffstat (limited to 'package/uboot-xburst/files/cpu/mips/mmc_protocol.h')
-rw-r--r-- | package/uboot-xburst/files/cpu/mips/mmc_protocol.h | 273 |
1 files changed, 273 insertions, 0 deletions
diff --git a/package/uboot-xburst/files/cpu/mips/mmc_protocol.h b/package/uboot-xburst/files/cpu/mips/mmc_protocol.h new file mode 100644 index 0000000000..ebd59125b6 --- /dev/null +++ b/package/uboot-xburst/files/cpu/mips/mmc_protocol.h @@ -0,0 +1,273 @@ +/* +********************************************************************** +* +* uC/MMC +* +* (c) Copyright 2005 - 2007, Ingenic Semiconductor, Inc +* All rights reserved. +* +*********************************************************************** + +---------------------------------------------------------------------- +File : mmc_protocol.h +Purpose : MMC protocol definitions. + +---------------------------------------------------------------------- +Version-Date-----Author-Explanation +---------------------------------------------------------------------- +1.00.00 20060831 WeiJianli First release + +---------------------------------------------------------------------- +Known problems or limitations with current version +---------------------------------------------------------------------- +(none) +---------------------------END-OF-HEADER------------------------------ +*/ + +#ifndef __MMC_PROTOCOL__ +#define __MMC_PROTOCOL__ + +/* Standard MMC/SD clock speeds */ +#define MMC_CLOCK_SLOW 400000 /* 400 kHz for initial setup */ +#define MMC_CLOCK_FAST 20000000 /* 20 MHz for maximum for normal operation */ +#define SD_CLOCK_FAST 24000000 /* 24 MHz for SD Cards */ + +/* Extra MMC commands for state control */ +/* Use negative numbers to disambiguate */ +#define MMC_CIM_RESET -1 + +/* Standard MMC commands (3.1) type argument response */ + /* class 1 */ +#define MMC_GO_IDLE_STATE 0 /* bc */ +#define MMC_SEND_OP_COND 1 /* bcr [31:0] OCR R3 */ +#define MMC_ALL_SEND_CID 2 /* bcr R2 */ +#define MMC_SET_RELATIVE_ADDR 3 /* ac [31:16] RCA R1 */ +#define MMC_SET_DSR 4 /* bc [31:16] RCA */ +#define MMC_SELECT_CARD 7 /* ac [31:16] RCA R1 */ +#define MMC_SEND_CSD 9 /* ac [31:16] RCA R2 */ +#define MMC_SEND_CID 10 /* ac [31:16] RCA R2 */ +#define MMC_READ_DAT_UNTIL_STOP 11 /* adtc [31:0] dadr R1 */ +#define MMC_STOP_TRANSMISSION 12 /* ac R1b */ +#define MMC_SEND_STATUS 13 /* ac [31:16] RCA R1 */ +#define MMC_GO_INACTIVE_STATE 15 /* ac [31:16] RCA */ + + /* class 2 */ +#define MMC_SET_BLOCKLEN 16 /* ac [31:0] block len R1 */ +#define MMC_READ_SINGLE_BLOCK 17 /* adtc [31:0] data addr R1 */ +#define MMC_READ_MULTIPLE_BLOCK 18 /* adtc [31:0] data addr R1 */ + + /* class 3 */ +#define MMC_WRITE_DAT_UNTIL_STOP 20 /* adtc [31:0] data addr R1 */ + + /* class 4 */ +#define MMC_SET_BLOCK_COUNT 23 /* adtc [31:0] data addr R1 */ +#define MMC_WRITE_BLOCK 24 /* adtc [31:0] data addr R1 */ +#define MMC_WRITE_MULTIPLE_BLOCK 25 /* adtc R1 */ +#define MMC_PROGRAM_CID 26 /* adtc R1 */ +#define MMC_PROGRAM_CSD 27 /* adtc R1 */ + + /* class 6 */ +#define MMC_SET_WRITE_PROT 28 /* ac [31:0] data addr R1b */ +#define MMC_CLR_WRITE_PROT 29 /* ac [31:0] data addr R1b */ +#define MMC_SEND_WRITE_PROT 30 /* adtc [31:0] wpdata addr R1 */ + + /* class 5 */ +#define MMC_ERASE_GROUP_START 35 /* ac [31:0] data addr R1 */ +#define MMC_ERASE_GROUP_END 36 /* ac [31:0] data addr R1 */ +#define MMC_ERASE 37 /* ac R1b */ + + /* class 9 */ +#define MMC_FAST_IO 39 /* ac <Complex> R4 */ +#define MMC_GO_IRQ_STATE 40 /* bcr R5 */ + + /* class 7 */ +#define MMC_LOCK_UNLOCK 42 /* adtc R1b */ + + /* class 8 */ +#define MMC_APP_CMD 55 /* ac [31:16] RCA R1 */ +#define MMC_GEN_CMD 56 /* adtc [0] RD/WR R1b */ + + /* SD class */ +#define SD_SEND_OP_COND 41 /* bcr [31:0] OCR R3 */ +#define SET_BUS_WIDTH 6 /* ac [1:0] bus width R1 */ +#define SEND_SCR 51 /* adtc [31:0] staff R1 */ + +/* Don't change the order of these; they are used in dispatch tables */ +enum mmc_rsp_t { + RESPONSE_NONE = 0, + RESPONSE_R1 = 1, + RESPONSE_R1B = 2, + RESPONSE_R2_CID = 3, + RESPONSE_R2_CSD = 4, + RESPONSE_R3 = 5, + RESPONSE_R4 = 6, + RESPONSE_R5 = 7, + RESPONSE_R6 = 8, +}; + + +/* + MMC status in R1 + Type + e : error bit + s : status bit + r : detected and set for the actual command response + x : detected and set during command execution. the host must poll + the card by sending status command in order to read these bits. + Clear condition + a : according to the card state + b : always related to the previous command. Reception of + a valid command will clear it (with a delay of one command) + c : clear by read + */ + +#define R1_OUT_OF_RANGE (1 << 31) /* er, c */ +#define R1_ADDRESS_ERROR (1 << 30) /* erx, c */ +#define R1_BLOCK_LEN_ERROR (1 << 29) /* er, c */ +#define R1_ERASE_SEQ_ERROR (1 << 28) /* er, c */ +#define R1_ERASE_PARAM (1 << 27) /* ex, c */ +#define R1_WP_VIOLATION (1 << 26) /* erx, c */ +#define R1_CARD_IS_LOCKED (1 << 25) /* sx, a */ +#define R1_LOCK_UNLOCK_FAILED (1 << 24) /* erx, c */ +#define R1_COM_CRC_ERROR (1 << 23) /* er, b */ +#define R1_ILLEGAL_COMMAND (1 << 22) /* er, b */ +#define R1_CARD_ECC_FAILED (1 << 21) /* ex, c */ +#define R1_CC_ERROR (1 << 20) /* erx, c */ +#define R1_ERROR (1 << 19) /* erx, c */ +#define R1_UNDERRUN (1 << 18) /* ex, c */ +#define R1_OVERRUN (1 << 17) /* ex, c */ +#define R1_CID_CSD_OVERWRITE (1 << 16) /* erx, c, CID/CSD overwrite */ +#define R1_WP_ERASE_SKIP (1 << 15) /* sx, c */ +#define R1_CARD_ECC_DISABLED (1 << 14) /* sx, a */ +#define R1_ERASE_RESET (1 << 13) /* sr, c */ +#define R1_STATUS(x) (x & 0xFFFFE000) +#define R1_CURRENT_STATE(x) ((x & 0x00001E00) >> 9) /* sx, b (4 bits) */ +#define R1_READY_FOR_DATA (1 << 8) /* sx, a */ +#define R1_APP_CMD (1 << 7) /* sr, c */ + +enum card_state { + CARD_STATE_EMPTY = -1, + CARD_STATE_IDLE = 0, + CARD_STATE_READY = 1, + CARD_STATE_IDENT = 2, + CARD_STATE_STBY = 3, + CARD_STATE_TRAN = 4, + CARD_STATE_DATA = 5, + CARD_STATE_RCV = 6, + CARD_STATE_PRG = 7, + CARD_STATE_DIS = 8, +}; + +/* These are unpacked versions of the actual responses */ + + struct mmc_response_r1 { + u8 cmd; + u32 status; +}; + +typedef struct mmc_cid { + u8 mid; + u16 oid; + u8 pnm[7]; /* Product name (we null-terminate) */ + u8 prv; + u32 psn; + u8 mdt; +}mmc_cid_t; + +typedef struct mmc_csd { + u8 csd_structure; + u8 spec_vers; + u8 taac; + u8 nsac; + u8 tran_speed; + u16 ccc; + u8 read_bl_len; + u8 read_bl_partial; + u8 write_blk_misalign; + u8 read_blk_misalign; + u8 dsr_imp; + u16 c_size; + u8 vdd_r_curr_min; + u8 vdd_r_curr_max; + u8 vdd_w_curr_min; + u8 vdd_w_curr_max; + u8 c_size_mult; + union { + struct { /* MMC system specification version 3.1 */ + u8 erase_grp_size; + u8 erase_grp_mult; + } v31; + struct { /* MMC system specification version 2.2 */ + u8 sector_size; + u8 erase_grp_size; + } v22; + } erase; + u8 wp_grp_size; + u8 wp_grp_enable; + u8 default_ecc; + u8 r2w_factor; + u8 write_bl_len; + u8 write_bl_partial; + u8 file_format_grp; + u8 copy; + u8 perm_write_protect; + u8 tmp_write_protect; + u8 file_format; + u8 ecc; +}mmc_csd_t;; + +struct mmc_response_r3 { + u32 ocr; +}; + +#define MMC_VDD_145_150 0x00000001 /* VDD voltage 1.45 - 1.50 */ +#define MMC_VDD_150_155 0x00000002 /* VDD voltage 1.50 - 1.55 */ +#define MMC_VDD_155_160 0x00000004 /* VDD voltage 1.55 - 1.60 */ +#define MMC_VDD_160_165 0x00000008 /* VDD voltage 1.60 - 1.65 */ +#define MMC_VDD_165_170 0x00000010 /* VDD voltage 1.65 - 1.70 */ +#define MMC_VDD_17_18 0x00000020 /* VDD voltage 1.7 - 1.8 */ +#define MMC_VDD_18_19 0x00000040 /* VDD voltage 1.8 - 1.9 */ +#define MMC_VDD_19_20 0x00000080 /* VDD voltage 1.9 - 2.0 */ +#define MMC_VDD_20_21 0x00000100 /* VDD voltage 2.0 ~ 2.1 */ +#define MMC_VDD_21_22 0x00000200 /* VDD voltage 2.1 ~ 2.2 */ +#define MMC_VDD_22_23 0x00000400 /* VDD voltage 2.2 ~ 2.3 */ +#define MMC_VDD_23_24 0x00000800 /* VDD voltage 2.3 ~ 2.4 */ +#define MMC_VDD_24_25 0x00001000 /* VDD voltage 2.4 ~ 2.5 */ +#define MMC_VDD_25_26 0x00002000 /* VDD voltage 2.5 ~ 2.6 */ +#define MMC_VDD_26_27 0x00004000 /* VDD voltage 2.6 ~ 2.7 */ +#define MMC_VDD_27_28 0x00008000 /* VDD voltage 2.7 ~ 2.8 */ +#define MMC_VDD_28_29 0x00010000 /* VDD voltage 2.8 ~ 2.9 */ +#define MMC_VDD_29_30 0x00020000 /* VDD voltage 2.9 ~ 3.0 */ +#define MMC_VDD_30_31 0x00040000 /* VDD voltage 3.0 ~ 3.1 */ +#define MMC_VDD_31_32 0x00080000 /* VDD voltage 3.1 ~ 3.2 */ +#define MMC_VDD_32_33 0x00100000 /* VDD voltage 3.2 ~ 3.3 */ +#define MMC_VDD_33_34 0x00200000 /* VDD voltage 3.3 ~ 3.4 */ +#define MMC_VDD_34_35 0x00400000 /* VDD voltage 3.4 ~ 3.5 */ +#define MMC_VDD_35_36 0x00800000 /* VDD voltage 3.5 ~ 3.6 */ +#define MMC_CARD_BUSY 0x80000000 /* Card Power up status bit */ + + +/* CSD field definitions */ + +#define CSD_STRUCT_VER_1_0 0 /* Valid for system specification 1.0 - 1.2 */ +#define CSD_STRUCT_VER_1_1 1 /* Valid for system specification 1.4 - 2.2 */ +#define CSD_STRUCT_VER_1_2 2 /* Valid for system specification 3.1 */ + +#define CSD_SPEC_VER_0 0 /* Implements system specification 1.0 - 1.2 */ +#define CSD_SPEC_VER_1 1 /* Implements system specification 1.4 */ +#define CSD_SPEC_VER_2 2 /* Implements system specification 2.0 - 2.2 */ +#define CSD_SPEC_VER_3 3 /* Implements system specification 3.1 */ + +#if MMC_DEBUG_LEVEL + +#define DEBUG(n, args...) \ + do { \ + if (n <= MMC_DEBUG_LEVEL) { \ + printf(args); \ + } \ + } while(0) +#else +#define DEBUG(n, args...) +#endif /* MMC_DEBUG_EN */ + +#endif /* __MMC_PROTOCOL__ */ |