diff options
Diffstat (limited to 'package/uboot-xburst/files/cpu/mips/jz_lcd.c')
-rw-r--r-- | package/uboot-xburst/files/cpu/mips/jz_lcd.c | 484 |
1 files changed, 484 insertions, 0 deletions
diff --git a/package/uboot-xburst/files/cpu/mips/jz_lcd.c b/package/uboot-xburst/files/cpu/mips/jz_lcd.c new file mode 100644 index 0000000000..927b82a6ac --- /dev/null +++ b/package/uboot-xburst/files/cpu/mips/jz_lcd.c @@ -0,0 +1,484 @@ +/* + * JzRISC lcd controller + * + * xiangfu liu <xiangfu.z@gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Fallowing macro may be used: + * CONFIG_LCD : LCD support + * LCD_BPP : Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8 + * CONFIG_LCD_LOGO : show logo + */ + +#include <config.h> +#include <common.h> +#include <lcd.h> + +#include <asm/io.h> /* virt_to_phys() */ + +#if defined(CONFIG_LCD) && !defined(CONFIG_SLCD) + +#if defined(CONFIG_JZ4740) +#include <asm/jz4740.h> +#endif + +#include "jz_lcd.h" + + +struct jzfb_info { + unsigned int cfg; /* panel mode and pin usage etc. */ + unsigned int w; + unsigned int h; + unsigned int bpp; /* bit per pixel */ + unsigned int fclk; /* frame clk */ + unsigned int hsw; /* hsync width, in pclk */ + unsigned int vsw; /* vsync width, in line count */ + unsigned int elw; /* end of line, in pclk */ + unsigned int blw; /* begin of line, in pclk */ + unsigned int efw; /* end of frame, in line count */ + unsigned int bfw; /* begin of frame, in line count */ +}; + +static struct jzfb_info jzfb = { + #if defined(CONFIG_NANONOTE) + MODE_8BIT_SERIAL_TFT | PCLK_N | HSYNC_N | VSYNC_N, + 320, 240, 32, 70, 1, 1, 273, 140, 1, 20 + #endif + +}; + +/************************************************************************/ + +vidinfo_t panel_info = { +#if defined(CONFIG_JZLCD_FOXCONN_PT035TN01) + 320, 240, LCD_BPP, +#endif +}; + +/*----------------------------------------------------------------------*/ + +int lcd_line_length; + +int lcd_color_fg; +int lcd_color_bg; + +/* + * Frame buffer memory information + */ +void *lcd_base; /* Start of framebuffer memory */ +void *lcd_console_address; /* Start of console buffer */ + +short console_col; +short console_row; + +/*----------------------------------------------------------------------*/ + +void lcd_ctrl_init (void *lcdbase); + +void lcd_enable (void); +void lcd_disable (void); + +/*----------------------------------------------------------------------*/ + +static int jz_lcd_init_mem(void *lcdbase, vidinfo_t *vid); +static void jz_lcd_desc_init(vidinfo_t *vid); +static int jz_lcd_hw_init( vidinfo_t *vid ); +extern int flush_cache_all(void); + +#if LCD_BPP == LCD_COLOR8 +void lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue); +#endif +#if LCD_BPP == LCD_MONOCHROME +void lcd_initcolregs (void); +#endif + +/*-----------------------------------------------------------------------*/ + +void lcd_ctrl_init (void *lcdbase) +{ + __lcd_display_pin_init(); + + jz_lcd_init_mem(lcdbase, &panel_info); + jz_lcd_desc_init(&panel_info); + jz_lcd_hw_init(&panel_info); + + __lcd_display_on() ; +} + +/*----------------------------------------------------------------------*/ +#if LCD_BPP == LCD_COLOR8 +void +lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue) +{ +} +#endif +/*----------------------------------------------------------------------*/ + +#if LCD_BPP == LCD_MONOCHROME +static +void lcd_initcolregs (void) +{ +} +#endif + +/* + * Before enabled lcd controller, lcd registers should be configured correctly. + */ + +void lcd_enable (void) +{ + REG_LCD_CTRL &= ~(1<<4); /* LCDCTRL.DIS */ + REG_LCD_CTRL |= 1<<3; /* LCDCTRL.ENA*/ +} + +void lcd_disable (void) +{ + REG_LCD_CTRL |= (1<<4); /* LCDCTRL.DIS, regular disable */ + /* REG_LCD_CTRL |= (1<<3); */ /* LCDCTRL.DIS, quikly disable */ +} + +static int jz_lcd_init_mem(void *lcdbase, vidinfo_t *vid) +{ + u_long palette_mem_size; + struct jz_fb_info *fbi = &vid->jz_fb; + int fb_size = vid->vl_row * (vid->vl_col * NBITS (vid->vl_bpix)) / 8; + + fbi->screen = (u_long)lcdbase; + fbi->palette_size = 256; + palette_mem_size = fbi->palette_size * sizeof(u16); + + debug("jz_lcd.c palette_mem_size = 0x%08lx\n", (u_long) palette_mem_size); + /* locate palette and descs at end of page following fb */ + fbi->palette = (u_long)lcdbase + fb_size + PAGE_SIZE - palette_mem_size; + + return 0; +} + +static void jz_lcd_desc_init(vidinfo_t *vid) +{ + struct jz_fb_info * fbi; + fbi = &vid->jz_fb; + fbi->dmadesc_fblow = (struct jz_fb_dma_descriptor *)((unsigned int)fbi->palette - 3*16); + fbi->dmadesc_fbhigh = (struct jz_fb_dma_descriptor *)((unsigned int)fbi->palette - 2*16); + fbi->dmadesc_palette = (struct jz_fb_dma_descriptor *)((unsigned int)fbi->palette - 1*16); + + #define BYTES_PER_PANEL (vid->vl_col * vid->vl_row * NBITS(vid->vl_bpix) / 8) + + /* populate descriptors */ + fbi->dmadesc_fblow->fdadr = virt_to_phys(fbi->dmadesc_fblow); + fbi->dmadesc_fblow->fsadr = virt_to_phys((void *)(fbi->screen + BYTES_PER_PANEL)); + fbi->dmadesc_fblow->fidr = 0; + fbi->dmadesc_fblow->ldcmd = BYTES_PER_PANEL / 4 ; + + fbi->fdadr1 = virt_to_phys(fbi->dmadesc_fblow); /* only used in dual-panel mode */ + + fbi->dmadesc_fbhigh->fsadr = virt_to_phys((void *)fbi->screen); + fbi->dmadesc_fbhigh->fidr = 0; + fbi->dmadesc_fbhigh->ldcmd = BYTES_PER_PANEL / 4; /* length in word */ + + fbi->dmadesc_palette->fsadr = virt_to_phys((void *)fbi->palette); + fbi->dmadesc_palette->fidr = 0; + fbi->dmadesc_palette->ldcmd = (fbi->palette_size * 2)/4 | (1<<28); + + if( NBITS(vid->vl_bpix) < 12) + { + /* assume any mode with <12 bpp is palette driven */ + fbi->dmadesc_palette->fdadr = virt_to_phys(fbi->dmadesc_fbhigh); + fbi->dmadesc_fbhigh->fdadr = virt_to_phys(fbi->dmadesc_palette); + /* flips back and forth between pal and fbhigh */ + fbi->fdadr0 = virt_to_phys(fbi->dmadesc_palette); + } else { + /* palette shouldn't be loaded in true-color mode */ + fbi->dmadesc_fbhigh->fdadr = virt_to_phys((void *)fbi->dmadesc_fbhigh); + fbi->fdadr0 = virt_to_phys(fbi->dmadesc_fbhigh); /* no pal just fbhigh */ + } + + flush_cache_all(); +} + +static int jz_lcd_hw_init(vidinfo_t *vid) +{ + struct jz_fb_info *fbi = &vid->jz_fb; + unsigned int val = 0; + unsigned int pclk; + unsigned int stnH; +#if defined(CONFIG_MIPS_JZ4740) + int pll_div; +#endif + + /* Setting Control register */ + switch (jzfb.bpp) { + case 1: + val |= LCD_CTRL_BPP_1; + break; + case 2: + val |= LCD_CTRL_BPP_2; + break; + case 4: + val |= LCD_CTRL_BPP_4; + break; + case 8: + val |= LCD_CTRL_BPP_8; + break; + case 15: + val |= LCD_CTRL_RGB555; + case 16: + val |= LCD_CTRL_BPP_16; + break; +#if defined(CONFIG_MIPS_JZ4740) + case 17 ... 32: + val |= LCD_CTRL_BPP_18_24; /* target is 4bytes/pixel */ + break; +#endif + default: + printf("jz_lcd.c The BPP %d is not supported\n", jzfb.bpp); + val |= LCD_CTRL_BPP_16; + break; + } + + switch (jzfb.cfg & MODE_MASK) { + case MODE_STN_MONO_DUAL: + case MODE_STN_COLOR_DUAL: + case MODE_STN_MONO_SINGLE: + case MODE_STN_COLOR_SINGLE: + switch (jzfb.bpp) { + case 1: + /* val |= LCD_CTRL_PEDN; */ + case 2: + val |= LCD_CTRL_FRC_2; + break; + case 4: + val |= LCD_CTRL_FRC_4; + break; + case 8: + default: + val |= LCD_CTRL_FRC_16; + break; + } + break; + } + + val |= LCD_CTRL_BST_16; /* Burst Length is 16WORD=64Byte */ + val |= LCD_CTRL_OFUP; /* OutFIFO underrun protect */ + + switch (jzfb.cfg & MODE_MASK) { + case MODE_STN_MONO_DUAL: + case MODE_STN_COLOR_DUAL: + case MODE_STN_MONO_SINGLE: + case MODE_STN_COLOR_SINGLE: + switch (jzfb.cfg & STN_DAT_PINMASK) { +#define align2(n) (n)=((((n)+1)>>1)<<1) +#define align4(n) (n)=((((n)+3)>>2)<<2) +#define align8(n) (n)=((((n)+7)>>3)<<3) + case STN_DAT_PIN1: + /* Do not adjust the hori-param value. */ + break; + case STN_DAT_PIN2: + align2(jzfb.hsw); + align2(jzfb.elw); + align2(jzfb.blw); + break; + case STN_DAT_PIN4: + align4(jzfb.hsw); + align4(jzfb.elw); + align4(jzfb.blw); + break; + case STN_DAT_PIN8: + align8(jzfb.hsw); + align8(jzfb.elw); + align8(jzfb.blw); + break; + } + break; + } + + REG_LCD_CTRL = val; + + switch (jzfb.cfg & MODE_MASK) { + case MODE_STN_MONO_DUAL: + case MODE_STN_COLOR_DUAL: + case MODE_STN_MONO_SINGLE: + case MODE_STN_COLOR_SINGLE: + if (((jzfb.cfg & MODE_MASK) == MODE_STN_MONO_DUAL) || + ((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_DUAL)) + stnH = jzfb.h >> 1; + else + stnH = jzfb.h; + + REG_LCD_VSYNC = (0 << 16) | jzfb.vsw; + REG_LCD_HSYNC = ((jzfb.blw+jzfb.w) << 16) | (jzfb.blw+jzfb.w+jzfb.hsw); + + /* Screen setting */ + REG_LCD_VAT = ((jzfb.blw + jzfb.w + jzfb.hsw + jzfb.elw) << 16) | (stnH + jzfb.vsw + jzfb.bfw + jzfb.efw); + REG_LCD_DAH = (jzfb.blw << 16) | (jzfb.blw + jzfb.w); + REG_LCD_DAV = (0 << 16) | (stnH); + + /* AC BIAs signal */ + REG_LCD_PS = (0 << 16) | (stnH+jzfb.vsw+jzfb.efw+jzfb.bfw); + + break; + + case MODE_TFT_GEN: + case MODE_TFT_SHARP: + case MODE_TFT_CASIO: + case MODE_TFT_SAMSUNG: + case MODE_8BIT_SERIAL_TFT: + case MODE_TFT_18BIT: + REG_LCD_VSYNC = (0 << 16) | jzfb.vsw; + REG_LCD_HSYNC = (0 << 16) | jzfb.hsw; +#if defined(CONFIG_JZLCD_INNOLUX_AT080TN42) + REG_LCD_DAV = (0 << 16) | ( jzfb.h ); +#else + REG_LCD_DAV =((jzfb.vsw+jzfb.bfw) << 16) | (jzfb.vsw +jzfb.bfw+jzfb.h); +#endif /*#if defined(CONFIG_JZLCD_INNOLUX_AT080TN42)*/ + REG_LCD_DAH = ((jzfb.hsw + jzfb.blw) << 16) | (jzfb.hsw + jzfb.blw + jzfb.w ); + REG_LCD_VAT = (((jzfb.blw + jzfb.w + jzfb.elw + jzfb.hsw)) << 16) \ + | (jzfb.vsw + jzfb.bfw + jzfb.h + jzfb.efw); + break; + } + + switch (jzfb.cfg & MODE_MASK) { + case MODE_TFT_SAMSUNG: + { + unsigned int total, tp_s, tp_e, ckv_s, ckv_e; + unsigned int rev_s, rev_e, inv_s, inv_e; + + pclk = val * (jzfb.w + jzfb.hsw + jzfb.elw + jzfb.blw) * + (jzfb.h + jzfb.vsw + jzfb.efw + jzfb.bfw); /* Pixclk */ + + total = jzfb.blw + jzfb.w + jzfb.elw + jzfb.hsw; + tp_s = jzfb.blw + jzfb.w + 1; + tp_e = tp_s + 1; + /* ckv_s = tp_s - jz_clocks.pixclk/(1000000000/4100); */ + ckv_s = tp_s - pclk/(1000000000/4100); + ckv_e = tp_s + total; + rev_s = tp_s - 11; /* -11.5 clk */ + rev_e = rev_s + total; + inv_s = tp_s; + inv_e = inv_s + total; + REG_LCD_CLS = (tp_s << 16) | tp_e; + REG_LCD_PS = (ckv_s << 16) | ckv_e; + REG_LCD_SPL = (rev_s << 16) | rev_e; + REG_LCD_REV = (inv_s << 16) | inv_e; + jzfb.cfg |= STFT_REVHI | STFT_SPLHI; + break; + } + case MODE_TFT_SHARP: + { + unsigned int total, cls_s, cls_e, ps_s, ps_e; + unsigned int spl_s, spl_e, rev_s, rev_e; + total = jzfb.blw + jzfb.w + jzfb.elw + jzfb.hsw; +#if !defined(CONFIG_JZLCD_INNOLUX_AT080TN42) + spl_s = 1; + spl_e = spl_s + 1; + cls_s = 0; + cls_e = total - 60; /* > 4us (pclk = 80ns) */ + ps_s = cls_s; + ps_e = cls_e; + rev_s = total - 40; /* > 3us (pclk = 80ns) */ + rev_e = rev_s + total; + jzfb.cfg |= STFT_PSHI; +#else /*#if defined(CONFIG_JZLCD_INNOLUX_AT080TN42)*/ + spl_s = total - 5; /* LD */ + spl_e = total -3; + cls_s = 32; /* CKV */ + cls_e = 145; + ps_s = 0; /* OEV */ + ps_e = 45; + rev_s = 0; /* POL */ + rev_e = 0; +#endif /*#if defined(CONFIG_JZLCD_INNOLUX_AT080TN42)*/ + REG_LCD_SPL = (spl_s << 16) | spl_e; + REG_LCD_CLS = (cls_s << 16) | cls_e; + REG_LCD_PS = (ps_s << 16) | ps_e; + REG_LCD_REV = (rev_s << 16) | rev_e; + break; + } + case MODE_TFT_CASIO: + break; + } + + /* Configure the LCD panel */ + REG_LCD_CFG = jzfb.cfg; + + /* Timing setting */ + __cpm_stop_lcd(); + + val = jzfb.fclk; /* frame clk */ + if ( (jzfb.cfg & MODE_MASK) != MODE_8BIT_SERIAL_TFT) { + pclk = val * (jzfb.w + jzfb.hsw + jzfb.elw + jzfb.blw) * + (jzfb.h + jzfb.vsw + jzfb.efw + jzfb.bfw); /* Pixclk */ + } + else { + /* serial mode: Hsync period = 3*Width_Pixel */ + pclk = val * (jzfb.w*3 + jzfb.hsw + jzfb.elw + jzfb.blw) * + (jzfb.h + jzfb.vsw + jzfb.efw + jzfb.bfw); /* Pixclk */ + } + + if (((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_SINGLE) || + ((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_DUAL)) + pclk = (pclk * 3); + + if (((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_SINGLE) || + ((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_DUAL) || + ((jzfb.cfg & MODE_MASK) == MODE_STN_MONO_SINGLE) || + ((jzfb.cfg & MODE_MASK) == MODE_STN_MONO_DUAL)) + pclk = pclk >> ((jzfb.cfg & STN_DAT_PINMASK) >> 4); + + if (((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_DUAL) || + ((jzfb.cfg & MODE_MASK) == MODE_STN_MONO_DUAL)) + pclk >>= 1; + + pll_div = ( REG_CPM_CPCCR & CPM_CPCCR_PCS ); /* clock source,0:pllout/2 1: pllout */ + pll_div = pll_div ? 1 : 2 ; + val = ( __cpm_get_pllout()/pll_div ) / pclk; + val--; + if ( val > 0x1ff ) { + printf("CPM_LPCDR too large, set it to 0x1ff\n"); + val = 0x1ff; + } + __cpm_set_pixdiv(val); + + val = pclk * 3 ; /* LCDClock > 2.5*Pixclock */ + if ( val > 150000000 ) { + printf("Warning: LCDClock=%d\n, LCDClock must less or equal to 150MHz.\n", val); + printf("Change LCDClock to 150MHz\n"); + val = 150000000; + } + val = ( __cpm_get_pllout()/pll_div ) / val; + val--; + if ( val > 0x1f ) { + printf("CPM_CPCCR.LDIV too large, set it to 0x1f\n"); + val = 0x1f; + } + __cpm_set_ldiv( val ); + REG_CPM_CPCCR |= CPM_CPCCR_CE ; /* update divide */ + + __cpm_start_lcd(); + udelay(1000); + + REG_LCD_DA0 = fbi->fdadr0; /* frame descripter*/ + + if (((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_DUAL) || + ((jzfb.cfg & MODE_MASK) == MODE_STN_MONO_DUAL)) + REG_LCD_DA1 = fbi->fdadr1; /* frame descripter*/ + + return 0; +} + |