diff options
Diffstat (limited to 'package/uboot-ifxmips/files/board/ifx/danube/danube.c')
| -rw-r--r-- | package/uboot-ifxmips/files/board/ifx/danube/danube.c | 208 |
1 files changed, 208 insertions, 0 deletions
diff --git a/package/uboot-ifxmips/files/board/ifx/danube/danube.c b/package/uboot-ifxmips/files/board/ifx/danube/danube.c new file mode 100644 index 0000000000..b6174ba6d8 --- /dev/null +++ b/package/uboot-ifxmips/files/board/ifx/danube/danube.c @@ -0,0 +1,208 @@ +/* + * (C) Copyright 2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <asm/addrspace.h> +#include <asm/danube.h> + +#ifdef DANUBE_USE_DDR_RAM +long int initdram(int board_type) +{ + return (1024*1024*DANUBE_DDR_RAM_SIZE); +} +#else +extern uint danube_get_cpuclk(void); + +static ulong max_sdram_size(void) /* per Chip Select */ +{ + /* The only supported SDRAM data width is 16bit. + */ +#define CFG_DW 4 + + /* The only supported number of SDRAM banks is 4. + */ +#define CFG_NB 4 + + ulong cfgpb0 = *DANUBE_SDRAM_MC_CFGPB0; + int cols = cfgpb0 & 0xF; + int rows = (cfgpb0 & 0xF0) >> 4; + ulong size = (1 << (rows + cols)) * CFG_DW * CFG_NB; + + return size; +} + +/* + * Check memory range for valid RAM. A simple memory test determines + * the actually available RAM size between addresses `base' and + * `base + maxsize'. + */ + +static long int dram_size(long int *base, long int maxsize) +{ + volatile long int *addr; + ulong cnt, val; + ulong save[32]; /* to make test non-destructive */ + unsigned char i = 0; + + for (cnt = (maxsize / sizeof (long)) >> 1; cnt > 0; cnt >>= 1) { + addr = base + cnt; /* pointer arith! */ + + save[i++] = *addr; + *addr = ~cnt; + } + + /* write 0 to base address */ + addr = base; + save[i] = *addr; + *addr = 0; + + /* check at base address */ + if ((val = *addr) != 0) { + *addr = save[i]; + return (0); + } + + for (cnt = 1; cnt < maxsize / sizeof (long); cnt <<= 1) { + addr = base + cnt; /* pointer arith! */ + + val = *addr; + *addr = save[--i]; + + if (val != (~cnt)) { + return (cnt * sizeof (long)); + } + } + return (maxsize); +} + +long int initdram(int board_type) +{ + int rows, cols, best_val = *DANUBE_SDRAM_MC_CFGPB0; + ulong size, max_size = 0; + ulong our_address; + + /* load t9 into our_address */ + asm volatile ("move %0, $25" : "=r" (our_address) :); + + /* Can't probe for RAM size unless we are running from Flash. + * find out whether running from DRAM or Flash. + */ + if (PHYSADDR(our_address) < PHYSADDR(PHYS_FLASH_1)) + { + return max_sdram_size(); + } + + for (cols = 0x8; cols <= 0xC; cols++) + { + for (rows = 0xB; rows <= 0xD; rows++) + { + *DANUBE_SDRAM_MC_CFGPB0 = (0x14 << 8) | + (rows << 4) | cols; + size = dram_size((ulong *)CFG_SDRAM_BASE, + max_sdram_size()); + + if (size > max_size) + { + best_val = *DANUBE_SDRAM_MC_CFGPB0; + max_size = size; + } + } + } + + *DANUBE_SDRAM_MC_CFGPB0 = best_val; + return max_size; +} +#endif + +int checkboard (void) +{ + /* No such register in Amazon */ +#if 0 + unsigned long chipid = *AMAZON_MCD_CHIPID; + int part_num; + + puts ("Board: AMAZON "); + part_num = AMAZON_MCD_CHIPID_PART_NUMBER_GET(chipid); + switch (part_num) { + case AMAZON_CHIPID_STANDARD: + printf ("Standard Version, "); + break; + case AMAZON_CHIPID_YANGTSE: + printf ("Yangtse Version, "); + break; + default: + printf ("Unknown Part Number 0x%x ", part_num); + break; + } + + printf ("Chip V1.%ld, ", AMAZON_MCD_CHIPID_VERSION_GET(chipid)); + + + printf("CPU Speed %d MHz\n", danube_get_cpuclk()/1000000); + +#endif + return 0; +} + + +/* + * Disk On Chip (NAND) Millenium initialization. + * The NAND lives in the CS2* space + */ +#if (CONFIG_COMMANDS & CFG_CMD_NAND) +extern void +nand_probe(ulong physadr); + +#define AT91_SMARTMEDIA_BASE 0x40000000 /* physical address to access memory on NCS3 */ +void +nand_init(void) +{ + int devtype; + /* Configure EBU */ +//TODO: should we keep this? + //Set GPIO23 to be Flash CS1; + *DANUBE_GPIO_P1_ALTSEL0 = *DANUBE_GPIO_P1_ALTSEL0 | (1<<7); + *DANUBE_GPIO_P1_ALTSEL1 = *DANUBE_GPIO_P1_ALTSEL1 & ~(1<<7); + *DANUBE_GPIO_P1_DIR = *DANUBE_GPIO_P1_DIR | (1<<7) ; + *DANUBE_GPIO_P1_OD = *DANUBE_GPIO_P1_OD | (1<<7) ; + + *EBU_ADDR_SEL_1 = (NAND_BASE_ADDRESS&0x1fffff00)|0x31; + /* byte swap;minimum delay*/ + *EBU_CON_1 = 0x40C155; + *EBU_NAND_CON = 0x000005F3; + + /* Set bus signals to inactive */ + NAND_READY_CLEAR; + + NAND_CE_CLEAR; + nand_probe(NAND_BASE_ADDRESS); + + + + //nand_probe(AT91_SMARTMEDIA_BASE); +} +#endif + + + |