3 files changed, 0 insertions, 67 deletions
diff --git a/package/l2tpd/files/l2tpd.conf b/package/l2tpd/files/l2tpd.conf
deleted file mode 100644
index 2a9ba1cc63..0000000000
--- a/package/l2tpd/files/l2tpd.conf
+++ /dev/null
@@ -1,29 +0,0 @@
-;
-; This is a minimal sample l2tpd configuration file for use
-; with L2TP over IPsec.
-;
-; The idea is to provide an L2TP daemon to which remote Windows L2TP/IPsec
-; clients connect. In this example, the internal (protected) network 
-; is 192.168.1.0/24.  A special IP range within this network is reserved
-; for the remote clients: 192.168.1.128/25
-; (i.e. 192.168.1.128 ... 192.168.1.254)
-;
-; The listen-addr parameter can be used if you want to bind the L2TP daemon
-; to a specific IP address instead of to all interfaces. For instance,
-; you could bind it to the interface of the internal LAN (e.g. 192.168.1.98
-; in the example below). Yet another IP address (local ip, e.g. 192.168.1.99)
-; will be used by l2tpd as its address on pppX interfaces.
-
-[global]
-; listen-addr = 192.168.1.98
-
-[lns default]
-ip range = 192.168.1.128-192.168.1.254
-local ip = 192.168.1.99
-require chap = yes
-refuse pap = yes
-require authentication = yes
-name = LinuxVPNserver
-ppp debug = yes
-pppoptfile = /etc/ppp/options.l2tpd
-length bit = yes
diff --git a/package/l2tpd/files/l2tpd.init b/package/l2tpd/files/l2tpd.init
deleted file mode 100644
index f531757993..0000000000
--- a/package/l2tpd/files/l2tpd.init
+++ /dev/null
@@ -1,21 +0,0 @@
-#!/bin/sh
-
-BIN=l2tpd
-DEFAULT=/etc/default/$BIN
-RUN_D=/var/run
-PID_F=$RUN_D/$BIN.pid
-[ -f $DEFAULT ] && . $DEFAULT
-
-case $1 in
- start)
-  $BIN $OPTIONS
-  ;;
- stop)
-  [ -f $PID_F ] && kill $(cat $PID_F)
-  ;;
- *)
-  echo "usage: $0 (start|stop)"
-  exit 1
-esac
-
-exit $?
diff --git a/package/l2tpd/files/options.l2tpd b/package/l2tpd/files/options.l2tpd
deleted file mode 100644
index 425a56e087..0000000000
--- a/package/l2tpd/files/options.l2tpd
+++ /dev/null
@@ -1,17 +0,0 @@
-ipcp-accept-local
-ipcp-accept-remote
-ms-dns  192.168.1.1
-ms-dns  192.168.1.3
-ms-wins 192.168.1.2
-ms-wins 192.168.1.4
-noccp
-auth
-crtscts
-idle 1800
-mtu 1410
-mru 1410
-nodefaultroute
-debug
-lock
-proxyarp
-connect-delay 5000