diff options
Diffstat (limited to 'package/kernel/mac80211/patches/brcm')
13 files changed, 557 insertions, 0 deletions
diff --git a/package/kernel/mac80211/patches/brcm/040-brcmutil_option.patch b/package/kernel/mac80211/patches/brcm/040-brcmutil_option.patch new file mode 100644 index 0000000000..167332d916 --- /dev/null +++ b/package/kernel/mac80211/patches/brcm/040-brcmutil_option.patch @@ -0,0 +1,9 @@ +--- a/drivers/net/wireless/broadcom/brcm80211/Kconfig ++++ b/drivers/net/wireless/broadcom/brcm80211/Kconfig +@@ -1,5 +1,5 @@ + config BRCMUTIL +- tristate ++ tristate "Broadcom 802.11 driver utility functions" + depends on m + + config BRCMSMAC diff --git a/package/kernel/mac80211/patches/brcm/810-b43-gpio-mask-module-option.patch b/package/kernel/mac80211/patches/brcm/810-b43-gpio-mask-module-option.patch new file mode 100644 index 0000000000..5ce49d3a07 --- /dev/null +++ b/package/kernel/mac80211/patches/brcm/810-b43-gpio-mask-module-option.patch @@ -0,0 +1,37 @@ +--- a/drivers/net/wireless/broadcom/b43/b43.h ++++ b/drivers/net/wireless/broadcom/b43/b43.h +@@ -839,6 +839,7 @@ struct b43_wldev { + bool qos_enabled; /* TRUE, if QoS is used. */ + bool hwcrypto_enabled; /* TRUE, if HW crypto acceleration is enabled. */ + bool use_pio; /* TRUE if next init should use PIO */ ++ int gpiomask; /* GPIO LED mask as a module parameter */ + + /* PHY/Radio device. */ + struct b43_phy phy; +--- a/drivers/net/wireless/broadcom/b43/main.c ++++ b/drivers/net/wireless/broadcom/b43/main.c +@@ -85,6 +85,11 @@ MODULE_FIRMWARE("b43/ucode40.fw"); + MODULE_FIRMWARE("b43/ucode42.fw"); + MODULE_FIRMWARE("b43/ucode9.fw"); + ++static int modparam_gpiomask = 0x000F; ++module_param_named(gpiomask, modparam_gpiomask, int, 0444); ++MODULE_PARM_DESC(gpiomask, ++ "GPIO mask for LED control (default 0x000F)"); ++ + static int modparam_bad_frames_preempt; + module_param_named(bad_frames_preempt, modparam_bad_frames_preempt, int, 0444); + MODULE_PARM_DESC(bad_frames_preempt, +@@ -2892,10 +2897,10 @@ static int b43_gpio_init(struct b43_wlde + u32 mask, set; + + b43_maskset32(dev, B43_MMIO_MACCTL, ~B43_MACCTL_GPOUTSMSK, 0); +- b43_maskset16(dev, B43_MMIO_GPIO_MASK, ~0, 0xF); ++ b43_maskset16(dev, B43_MMIO_GPIO_MASK, ~0, modparam_gpiomask); + + mask = 0x0000001F; +- set = 0x0000000F; ++ set = modparam_gpiomask; + if (dev->dev->chip_id == 0x4301) { + mask |= 0x0060; + set |= 0x0060; diff --git a/package/kernel/mac80211/patches/brcm/811-b43_no_pio.patch b/package/kernel/mac80211/patches/brcm/811-b43_no_pio.patch new file mode 100644 index 0000000000..d23387c8cd --- /dev/null +++ b/package/kernel/mac80211/patches/brcm/811-b43_no_pio.patch @@ -0,0 +1,86 @@ +--- a/drivers/net/wireless/broadcom/b43/Makefile ++++ b/drivers/net/wireless/broadcom/b43/Makefile +@@ -17,7 +17,7 @@ b43-$(CPTCFG_B43_PHY_AC) += phy_ac.o + b43-y += sysfs.o + b43-y += xmit.o + b43-y += dma.o +-b43-y += pio.o ++b43-$(CPTCFG_B43_PIO) += pio.o + b43-y += rfkill.o + b43-y += ppr.o + b43-$(CPTCFG_B43_LEDS) += leds.o +--- a/drivers/net/wireless/broadcom/b43/main.c ++++ b/drivers/net/wireless/broadcom/b43/main.c +@@ -2018,10 +2018,12 @@ static void b43_do_interrupt_thread(stru + dma_reason[0], dma_reason[1], + dma_reason[2], dma_reason[3], + dma_reason[4], dma_reason[5]); ++#ifdef CPTCFG_B43_PIO + b43err(dev->wl, "This device does not support DMA " + "on your system. It will now be switched to PIO.\n"); + /* Fall back to PIO transfers if we get fatal DMA errors! */ + dev->use_pio = true; ++#endif + b43_controller_restart(dev, "DMA error"); + return; + } +--- a/drivers/net/wireless/broadcom/b43/pio.h ++++ b/drivers/net/wireless/broadcom/b43/pio.h +@@ -150,7 +150,7 @@ static inline void b43_piorx_write32(str + b43_write32(q->dev, q->mmio_base + offset, value); + } + +- ++#ifdef CPTCFG_B43_PIO + int b43_pio_init(struct b43_wldev *dev); + void b43_pio_free(struct b43_wldev *dev); + +@@ -161,5 +161,37 @@ void b43_pio_rx(struct b43_pio_rxqueue * + + void b43_pio_tx_suspend(struct b43_wldev *dev); + void b43_pio_tx_resume(struct b43_wldev *dev); ++#else ++static inline int b43_pio_init(struct b43_wldev *dev) ++{ ++ return 0; ++} ++ ++static inline void b43_pio_free(struct b43_wldev *dev) ++{ ++} ++ ++static inline int b43_pio_tx(struct b43_wldev *dev, struct sk_buff *skb) ++{ ++ return 0; ++} ++ ++static inline void b43_pio_handle_txstatus(struct b43_wldev *dev, ++ const struct b43_txstatus *status) ++{ ++} ++ ++static inline void b43_pio_rx(struct b43_pio_rxqueue *q) ++{ ++} ++ ++static inline void b43_pio_tx_suspend(struct b43_wldev *dev) ++{ ++} ++ ++static inline void b43_pio_tx_resume(struct b43_wldev *dev) ++{ ++} ++#endif /* CPTCFG_B43_PIO */ + + #endif /* B43_PIO_H_ */ +--- a/drivers/net/wireless/broadcom/b43/Kconfig ++++ b/drivers/net/wireless/broadcom/b43/Kconfig +@@ -98,7 +98,7 @@ config B43_BCMA_PIO + default y + + config B43_PIO +- bool ++ bool "Broadcom 43xx PIO support" + depends on B43 && B43_SSB + select SSB_BLOCKIO + default y diff --git a/package/kernel/mac80211/patches/brcm/812-b43-add-antenna-control.patch b/package/kernel/mac80211/patches/brcm/812-b43-add-antenna-control.patch new file mode 100644 index 0000000000..932c83b48e --- /dev/null +++ b/package/kernel/mac80211/patches/brcm/812-b43-add-antenna-control.patch @@ -0,0 +1,131 @@ +--- a/drivers/net/wireless/broadcom/b43/main.c ++++ b/drivers/net/wireless/broadcom/b43/main.c +@@ -1658,7 +1658,7 @@ static void b43_write_beacon_template(st + len, ram_offset, shm_size_offset, rate); + + /* Write the PHY TX control parameters. */ +- antenna = B43_ANTENNA_DEFAULT; ++ antenna = dev->tx_antenna; + antenna = b43_antenna_to_phyctl(antenna); + ctl = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL); + /* We can't send beacons with short preamble. Would get PHY errors. */ +@@ -3307,8 +3307,8 @@ static int b43_chip_init(struct b43_wlde + + /* Select the antennae */ + if (phy->ops->set_rx_antenna) +- phy->ops->set_rx_antenna(dev, B43_ANTENNA_DEFAULT); +- b43_mgmtframe_txantenna(dev, B43_ANTENNA_DEFAULT); ++ phy->ops->set_rx_antenna(dev, dev->rx_antenna); ++ b43_mgmtframe_txantenna(dev, dev->tx_antenna); + + if (phy->type == B43_PHYTYPE_B) { + value16 = b43_read16(dev, 0x005E); +@@ -4008,7 +4008,6 @@ static int b43_op_config(struct ieee8021 + struct b43_wldev *dev = wl->current_dev; + struct b43_phy *phy = &dev->phy; + struct ieee80211_conf *conf = &hw->conf; +- int antenna; + int err = 0; + + mutex_lock(&wl->mutex); +@@ -4051,11 +4050,9 @@ static int b43_op_config(struct ieee8021 + } + + /* Antennas for RX and management frame TX. */ +- antenna = B43_ANTENNA_DEFAULT; +- b43_mgmtframe_txantenna(dev, antenna); +- antenna = B43_ANTENNA_DEFAULT; ++ b43_mgmtframe_txantenna(dev, dev->tx_antenna); + if (phy->ops->set_rx_antenna) +- phy->ops->set_rx_antenna(dev, antenna); ++ phy->ops->set_rx_antenna(dev, dev->rx_antenna); + + if (wl->radio_enabled != phy->radio_on) { + if (wl->radio_enabled) { +@@ -5199,6 +5196,47 @@ static int b43_op_get_survey(struct ieee + return 0; + } + ++static int b43_op_set_antenna(struct ieee80211_hw *hw, u32 tx_ant, u32 rx_ant) ++{ ++ struct b43_wl *wl = hw_to_b43_wl(hw); ++ struct b43_wldev *dev = wl->current_dev; ++ ++ if (tx_ant == 1 && rx_ant == 1) { ++ dev->tx_antenna = B43_ANTENNA0; ++ dev->rx_antenna = B43_ANTENNA0; ++ } ++ else if (tx_ant == 2 && rx_ant == 2) { ++ dev->tx_antenna = B43_ANTENNA1; ++ dev->rx_antenna = B43_ANTENNA1; ++ } ++ else if ((tx_ant & 3) == 3 && (rx_ant & 3) == 3) { ++ dev->tx_antenna = B43_ANTENNA_DEFAULT; ++ dev->rx_antenna = B43_ANTENNA_DEFAULT; ++ } ++ else { ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++ ++static int b43_op_get_antenna(struct ieee80211_hw *hw, u32 *tx_ant, u32 *rx_ant) ++{ ++ struct b43_wl *wl = hw_to_b43_wl(hw); ++ struct b43_wldev *dev = wl->current_dev; ++ ++ switch (dev->tx_antenna) { ++ case B43_ANTENNA0: ++ *tx_ant = 1; *rx_ant = 1; break; ++ case B43_ANTENNA1: ++ *tx_ant = 2; *rx_ant = 2; break; ++ case B43_ANTENNA_DEFAULT: ++ *tx_ant = 3; *rx_ant = 3; break; ++ } ++ return 0; ++} ++ + static const struct ieee80211_ops b43_hw_ops = { + .tx = b43_op_tx, + .conf_tx = b43_op_conf_tx, +@@ -5220,6 +5258,8 @@ static const struct ieee80211_ops b43_hw + .sw_scan_complete = b43_op_sw_scan_complete_notifier, + .get_survey = b43_op_get_survey, + .rfkill_poll = b43_rfkill_poll, ++ .set_antenna = b43_op_set_antenna, ++ .get_antenna = b43_op_get_antenna, + }; + + /* Hard-reset the chip. Do not call this directly. +@@ -5523,6 +5563,8 @@ static int b43_one_core_attach(struct b4 + if (!wldev) + goto out; + ++ wldev->rx_antenna = B43_ANTENNA_DEFAULT; ++ wldev->tx_antenna = B43_ANTENNA_DEFAULT; + wldev->use_pio = b43_modparam_pio; + wldev->dev = dev; + wldev->wl = wl; +@@ -5617,6 +5659,9 @@ static struct b43_wl *b43_wireless_init( + + wiphy_ext_feature_set(hw->wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST); + ++ hw->wiphy->available_antennas_rx = 0x3; ++ hw->wiphy->available_antennas_tx = 0x3; ++ + wl->hw_registred = false; + hw->max_rates = 2; + SET_IEEE80211_DEV(hw, dev->dev); +--- a/drivers/net/wireless/broadcom/b43/b43.h ++++ b/drivers/net/wireless/broadcom/b43/b43.h +@@ -840,6 +840,8 @@ struct b43_wldev { + bool hwcrypto_enabled; /* TRUE, if HW crypto acceleration is enabled. */ + bool use_pio; /* TRUE if next init should use PIO */ + int gpiomask; /* GPIO LED mask as a module parameter */ ++ int rx_antenna; /* Used RX antenna (B43_ANTENNAxxx) */ ++ int tx_antenna; /* Used TX antenna (B43_ANTENNAxxx) */ + + /* PHY/Radio device. */ + struct b43_phy phy; diff --git a/package/kernel/mac80211/patches/brcm/813-b43-reduce-number-of-RX-slots.patch b/package/kernel/mac80211/patches/brcm/813-b43-reduce-number-of-RX-slots.patch new file mode 100644 index 0000000000..5899706896 --- /dev/null +++ b/package/kernel/mac80211/patches/brcm/813-b43-reduce-number-of-RX-slots.patch @@ -0,0 +1,11 @@ +--- a/drivers/net/wireless/broadcom/b43/dma.h ++++ b/drivers/net/wireless/broadcom/b43/dma.h +@@ -169,7 +169,7 @@ struct b43_dmadesc_generic { + + /* DMA engine tuning knobs */ + #define B43_TXRING_SLOTS 256 +-#define B43_RXRING_SLOTS 256 ++#define B43_RXRING_SLOTS 32 + #define B43_DMA0_RX_FW598_BUFSIZE (B43_DMA0_RX_FW598_FO + IEEE80211_MAX_FRAME_LEN) + #define B43_DMA0_RX_FW351_BUFSIZE (B43_DMA0_RX_FW351_FO + IEEE80211_MAX_FRAME_LEN) + diff --git a/package/kernel/mac80211/patches/brcm/814-b43-only-use-gpio-0-1-for-led.patch b/package/kernel/mac80211/patches/brcm/814-b43-only-use-gpio-0-1-for-led.patch new file mode 100644 index 0000000000..03f4524c88 --- /dev/null +++ b/package/kernel/mac80211/patches/brcm/814-b43-only-use-gpio-0-1-for-led.patch @@ -0,0 +1,17 @@ +--- a/drivers/net/wireless/broadcom/b43/main.c ++++ b/drivers/net/wireless/broadcom/b43/main.c +@@ -2909,6 +2909,14 @@ static int b43_gpio_init(struct b43_wlde + } else if (dev->dev->chip_id == 0x5354) { + /* Don't allow overtaking buttons GPIOs */ + set &= 0x2; /* 0x2 is LED GPIO on BCM5354 */ ++ } else if (dev->dev->chip_id == BCMA_CHIP_ID_BCM4716 || ++ dev->dev->chip_id == BCMA_CHIP_ID_BCM47162 || ++ dev->dev->chip_id == BCMA_CHIP_ID_BCM5356 || ++ dev->dev->chip_id == BCMA_CHIP_ID_BCM5357 || ++ dev->dev->chip_id == BCMA_CHIP_ID_BCM53572) { ++ /* just use gpio 0 and 1 for 2.4 GHz wifi led */ ++ set &= 0x3; ++ mask &= 0x3; + } + + if (0 /* FIXME: conditional unknown */ ) { diff --git a/package/kernel/mac80211/patches/brcm/815-b43-always-take-overlapping-devs.patch b/package/kernel/mac80211/patches/brcm/815-b43-always-take-overlapping-devs.patch new file mode 100644 index 0000000000..f07151aa4e --- /dev/null +++ b/package/kernel/mac80211/patches/brcm/815-b43-always-take-overlapping-devs.patch @@ -0,0 +1,11 @@ +--- a/drivers/net/wireless/broadcom/b43/main.c ++++ b/drivers/net/wireless/broadcom/b43/main.c +@@ -127,7 +127,7 @@ static int b43_modparam_pio = 0; + module_param_named(pio, b43_modparam_pio, int, 0644); + MODULE_PARM_DESC(pio, "Use PIO accesses by default: 0=DMA, 1=PIO"); + +-static int modparam_allhwsupport = !IS_ENABLED(CPTCFG_BRCMSMAC); ++static int modparam_allhwsupport = 1; + module_param_named(allhwsupport, modparam_allhwsupport, int, 0444); + MODULE_PARM_DESC(allhwsupport, "Enable support for all hardware (even it if overlaps with the brcmsmac driver)"); + diff --git a/package/kernel/mac80211/patches/brcm/850-brcmsmac-remove-extra-regulation-restriction.patch b/package/kernel/mac80211/patches/brcm/850-brcmsmac-remove-extra-regulation-restriction.patch new file mode 100644 index 0000000000..3c93386b30 --- /dev/null +++ b/package/kernel/mac80211/patches/brcm/850-brcmsmac-remove-extra-regulation-restriction.patch @@ -0,0 +1,27 @@ +--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/channel.c ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/channel.c +@@ -58,19 +58,12 @@ + (((c) < 149) ? 3 : 4)))) + + #define BRCM_2GHZ_2412_2462 REG_RULE(2412-10, 2462+10, 40, 0, 19, 0) +-#define BRCM_2GHZ_2467_2472 REG_RULE(2467-10, 2472+10, 20, 0, 19, \ +- NL80211_RRF_NO_IR) ++#define BRCM_2GHZ_2467_2472 REG_RULE(2467-10, 2472+10, 20, 0, 19, 0) + +-#define BRCM_5GHZ_5180_5240 REG_RULE(5180-10, 5240+10, 40, 0, 21, \ +- NL80211_RRF_NO_IR) +-#define BRCM_5GHZ_5260_5320 REG_RULE(5260-10, 5320+10, 40, 0, 21, \ +- NL80211_RRF_DFS | \ +- NL80211_RRF_NO_IR) +-#define BRCM_5GHZ_5500_5700 REG_RULE(5500-10, 5700+10, 40, 0, 21, \ +- NL80211_RRF_DFS | \ +- NL80211_RRF_NO_IR) +-#define BRCM_5GHZ_5745_5825 REG_RULE(5745-10, 5825+10, 40, 0, 21, \ +- NL80211_RRF_NO_IR) ++#define BRCM_5GHZ_5180_5240 REG_RULE(5180-10, 5240+10, 40, 0, 21, 0) ++#define BRCM_5GHZ_5260_5320 REG_RULE(5260-10, 5320+10, 40, 0, 21, 0) ++#define BRCM_5GHZ_5500_5700 REG_RULE(5500-10, 5700+10, 40, 0, 21, 0) ++#define BRCM_5GHZ_5745_5825 REG_RULE(5745-10, 5825+10, 40, 0, 21, 0) + + static const struct ieee80211_regdomain brcms_regdom_x2 = { + .n_reg_rules = 6, diff --git a/package/kernel/mac80211/patches/brcm/860-brcmfmac-register-wiphy-s-during-module_init.patch b/package/kernel/mac80211/patches/brcm/860-brcmfmac-register-wiphy-s-during-module_init.patch new file mode 100644 index 0000000000..e70738322d --- /dev/null +++ b/package/kernel/mac80211/patches/brcm/860-brcmfmac-register-wiphy-s-during-module_init.patch @@ -0,0 +1,66 @@ +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> +Date: Mon, 8 Jun 2015 16:11:40 +0200 +Subject: [PATCH] brcmfmac: register wiphy(s) during module_init +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This is needed by OpenWrt which expects all PHYs to be created after +module loads successfully. + +Signed-off-by: Rafał Miłecki <zajec5@gmail.com> +--- + +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c +@@ -1347,6 +1347,7 @@ int __init brcmf_core_init(void) + { + if (!schedule_work(&brcmf_driver_work)) + return -EBUSY; ++ flush_work(&brcmf_driver_work); + + return 0; + } +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c +@@ -441,6 +441,7 @@ struct brcmf_fw { + struct brcmf_fw_request *req; + u32 curpos; + void (*done)(struct device *dev, int err, struct brcmf_fw_request *req); ++ struct completion *completion; + }; + + static void brcmf_fw_request_done(const struct firmware *fw, void *ctx); +@@ -589,6 +590,8 @@ fail: + fwctx->req = NULL; + done: + fwctx->done(fwctx->dev, ret, fwctx->req); ++ if (fwctx->completion) ++ complete(fwctx->completion); + kfree(fwctx); + } + +@@ -612,6 +615,8 @@ int brcmf_fw_get_firmwares(struct device + struct brcmf_fw_request *req)) + { + struct brcmf_fw *fwctx; ++ struct completion completion; ++ int err; + + brcmf_dbg(TRACE, "enter: dev=%s\n", dev_name(dev)); + if (!fw_cb) +@@ -628,7 +633,14 @@ int brcmf_fw_get_firmwares(struct device + fwctx->req = req; + fwctx->done = fw_cb; + ++ init_completion(&completion); ++ fwctx->completion = &completion; ++ + brcmf_fw_request_next_item(fwctx, true); ++ ++ wait_for_completion_timeout(fwctx->completion, msecs_to_jiffies(5000)); ++ fwctx->completion = NULL; ++ + return 0; + } + diff --git a/package/kernel/mac80211/patches/brcm/861-brcmfmac-workaround-bug-with-some-inconsistent-BSSes.patch b/package/kernel/mac80211/patches/brcm/861-brcmfmac-workaround-bug-with-some-inconsistent-BSSes.patch new file mode 100644 index 0000000000..1345e85f6d --- /dev/null +++ b/package/kernel/mac80211/patches/brcm/861-brcmfmac-workaround-bug-with-some-inconsistent-BSSes.patch @@ -0,0 +1,50 @@ +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> +Date: Thu, 9 Jul 2015 00:07:59 +0200 +Subject: [PATCH] brcmfmac: workaround bug with some inconsistent BSSes state +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Signed-off-by: Rafał Miłecki <zajec5@gmail.com> +--- + +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +@@ -614,9 +614,37 @@ static struct wireless_dev *brcmf_cfg802 + enum nl80211_iftype type, + struct vif_params *params) + { ++ struct net_device *dev; + struct wireless_dev *wdev; + int err; + ++ /* ++ * There is a bug with in-firmware BSS management. When adding virtual ++ * interface brcmfmac first tells firmware to create new BSS and then ++ * it creates new struct net_device. ++ * ++ * If creating/registering netdev(ice) fails, BSS remains in some bugged ++ * state. It conflicts with existing BSSes by overtaking their auth ++ * requests. ++ * ++ * It results in one BSS (addresss X) sending beacons and another BSS ++ * (address Y) replying to authentication requests. This makes interface ++ * unusable as AP. ++ * ++ * To workaround this bug we may try to guess if register_netdev(ice) ++ * will fail. The most obvious case is using interface name that already ++ * exists. This is actually quite likely with brcmfmac & some user space ++ * scripts as brcmfmac doesn't allow deleting virtual interfaces. ++ * So this bug can be triggered even by something trivial like: ++ * iw dev wlan0 delete ++ * iw phy phy0 interface add wlan0 type __ap ++ */ ++ dev = dev_get_by_name(&init_net, name); ++ if (dev) { ++ dev_put(dev); ++ return ERR_PTR(-ENFILE); ++ } ++ + brcmf_dbg(TRACE, "enter: %s type %d\n", name, type); + err = brcmf_vif_add_validate(wiphy_to_cfg(wiphy), type); + if (err) { diff --git a/package/kernel/mac80211/patches/brcm/862-brcmfmac-Disable-power-management.patch b/package/kernel/mac80211/patches/brcm/862-brcmfmac-Disable-power-management.patch new file mode 100644 index 0000000000..9b36059079 --- /dev/null +++ b/package/kernel/mac80211/patches/brcm/862-brcmfmac-Disable-power-management.patch @@ -0,0 +1,27 @@ +From 66ae1b1750720a33e29792a177b1e696f4f005fb Mon Sep 17 00:00:00 2001 +From: Phil Elwell <phil@raspberrypi.org> +Date: Wed, 9 Mar 2016 17:25:59 +0000 +Subject: [PATCH] brcmfmac: Disable power management + +Disable wireless power saving in the brcmfmac WLAN driver. This is a +temporary measure until the connectivity loss resulting from power +saving is resolved. + +Signed-off-by: Phil Elwell <phil@raspberrypi.org> +--- + drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +@@ -2725,6 +2725,10 @@ brcmf_cfg80211_set_power_mgmt(struct wip + * preference in cfg struct to apply this to + * FW later while initializing the dongle + */ ++#if defined(CONFIG_ARCH_BCM2835) ++ brcmf_dbg(INFO, "power management disabled\n"); ++ enabled = false; ++#endif + cfg->pwr_save = enabled; + if (!check_vif_up(ifp->vif)) { + diff --git a/package/kernel/mac80211/patches/brcm/863-brcmfmac-add-in-driver-tables-with-country-codes.patch b/package/kernel/mac80211/patches/brcm/863-brcmfmac-add-in-driver-tables-with-country-codes.patch new file mode 100644 index 0000000000..e7551c3a70 --- /dev/null +++ b/package/kernel/mac80211/patches/brcm/863-brcmfmac-add-in-driver-tables-with-country-codes.patch @@ -0,0 +1,60 @@ +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> +Subject: [PATCH] brcmfmac: add in-driver tables with country codes +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This adds early support for changing region. Ideally this data should +be stored in DT as all these mappings are devices specific. + +Signed-off-by: Rafał Miłecki <rafal@milecki.pl> +--- + +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c +@@ -23,6 +23,36 @@ + #include "common.h" + #include "of.h" + ++/* TODO: FIXME: Use DT */ ++static void brcmf_of_probe_cc(struct device *dev, ++ struct brcmf_mp_device *settings) ++{ ++ static struct brcmfmac_pd_cc_entry netgear_r8000_cc_ent[] = { ++ { "JP", "JP", 78 }, ++ { "US", "Q2", 86 }, ++ }; ++ struct brcmfmac_pd_cc_entry *cc_ent = NULL; ++ int table_size = 0; ++ ++ if (of_machine_is_compatible("netgear,r8000")) { ++ cc_ent = netgear_r8000_cc_ent; ++ table_size = ARRAY_SIZE(netgear_r8000_cc_ent); ++ } ++ ++ if (cc_ent && table_size) { ++ struct brcmfmac_pd_cc *cc; ++ size_t memsize; ++ ++ memsize = table_size * sizeof(struct brcmfmac_pd_cc_entry); ++ cc = devm_kzalloc(dev, sizeof(*cc) + memsize, GFP_KERNEL); ++ if (!cc) ++ return; ++ cc->table_size = table_size; ++ memcpy(cc->table, cc_ent, memsize); ++ settings->country_codes = cc; ++ } ++} ++ + void brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type, + struct brcmf_mp_device *settings) + { +@@ -32,6 +62,8 @@ void brcmf_of_probe(struct device *dev, + u32 irqf; + u32 val; + ++ brcmf_of_probe_cc(dev, settings); ++ + if (!np || bus_type != BRCMF_BUSTYPE_SDIO || + !of_device_is_compatible(np, "brcm,bcm4329-fmac")) + return; diff --git a/package/kernel/mac80211/patches/brcm/864-brcmfmac-do-not-use-internal-roaming-engine-by-default.patch b/package/kernel/mac80211/patches/brcm/864-brcmfmac-do-not-use-internal-roaming-engine-by-default.patch new file mode 100644 index 0000000000..05c82d645b --- /dev/null +++ b/package/kernel/mac80211/patches/brcm/864-brcmfmac-do-not-use-internal-roaming-engine-by-default.patch @@ -0,0 +1,25 @@ +brcmfmac: do not use internal roaming engine by default + +Some evidence of curing disconnects with this disabled, so make it a default. +Can be overridden with module parameter roamoff=0 +See: http://projectable.me/optimize-my-pi-wi-fi/ + +Signed-off-by: Phil Elwell <phil@raspberrypi.org> +--- + +Index: backports-v4.18-rc7/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c +=================================================================== +--- backports-v4.18-rc7.orig/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c ++++ backports-v4.18-rc7/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c +@@ -70,7 +70,11 @@ static int brcmf_fcmode; + module_param_named(fcmode, brcmf_fcmode, int, 0); + MODULE_PARM_DESC(fcmode, "Mode of firmware signalled flow control"); + ++#if defined(CONFIG_ARCH_BCM2835) ++static int brcmf_roamoff = 1; ++#else + static int brcmf_roamoff; ++#endif + module_param_named(roamoff, brcmf_roamoff, int, 0400); + MODULE_PARM_DESC(roamoff, "Do not use internal roaming engine"); + |