aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
authorRodrigo Balerdi <lanchon@gmail.com>2022-04-07 03:18:59 -0300
committerSungbo Eo <mans0n@gorani.run>2022-05-05 09:19:00 +0900
commitf8b0010dfb548469686049f85076fd6a3a6bca2e (patch)
tree17eed330a8f40252b96594311f8252b003d5fbfd /target/linux
parentf4e219fd5e6cfa33d234dad134fb105cc1620f54 (diff)
downloadupstream-f8b0010dfb548469686049f85076fd6a3a6bca2e.tar.gz
upstream-f8b0010dfb548469686049f85076fd6a3a6bca2e.tar.bz2
upstream-f8b0010dfb548469686049f85076fd6a3a6bca2e.zip
ipq806x: add support for Arris TR4400 v2 / RAC2V1A
Hardware specs: SoC: Qualcomm IPQ8065 (dual core Cortex-A15) RAM: 512 MB DDR3 Flash: 256 MB NAND, 32 MB NOR WiFi: QCA9983 2.4 GHz, QCA9984 5 GHz Switch: QCA8337 Ethernet: 5x 10/100/1000 Mbit/s USB: 1x USB 3.0 Type-A Buttons: WPS, Reset Power: 12 VDC, 2.5 A Ethernet ports: 1x WAN: connected to eth2 4x LAN: connected via the switch to eth0 and eth1 (eth0 is disabled in OEM firmware) MAC addresses (OEM and OpenWrt): fw_env @ 0x00 d4:ab:82:??:??:?a LAN (eth1) fw_env @ 0x06 d4:ab:82:??:??:?b WAN (eth2) fw_env @ 0x0c d4:ab:82:??:??:?c WLAN 2.4 GHz (ath1) fw_env @ 0x12 d4:ab:82:??:??:?d WLAN 5 GHz (ath0) fw_env @ 0x18 d4:ab:82:??:??:?e OEM usage unknown (eth0 in OpenWrt) OID d4:ab:82 is registered to: ARRIS Group, Inc., 6450 Sequence Drive, San Diego CA 92121, US More info: https://openwrt.org/inbox/toh/arris/tr4400_v2 IMPORTANT: This port requires moving the 'fw_env' partition prior to first boot to consolidate 70% of the usable space in flash into a contiguous partition. 'fw_env' contains factory-programmed MAC addresses, SSIDs, and passwords. Its contents must be copied to 'rootfs_1' prior to booting via initramfs. Note that the stock 'fw_env' partition will be wiped during sysupgrade. A writable 'stock_fw_env' partition pointing to the old, stock location is included in the port to help rolling back this change if desired. Installation: - Requires serial access and a TFTP server. - Fully boot stock, press ENTER, type in: mtd erase /dev/mtd21 dd if=/dev/mtd22 bs=128K count=1 | mtd write - /dev/mtd21 umount /config && ubidetach -m 23 && mtd erase /dev/mtd23 - Reboot and interrupt U-Boot by pressing a key, type in: set mtdids 'nand0=nand0' set mtdparts 'mtdparts=nand0:155M@0x6500000(mtd_ubi)' set bootcmd 'ubi part mtd_ubi && ubi read 0x44000000 kernel && bootm' env save - Setup TFTP server serving initramfs image as 'recovery.bin', type in: set ipaddr 192.168.1.1 set serverip 192.168.1.2 tftpboot recovery.bin && bootm - Use sysupgrade to install squashfs image. This port is based on work done by AmadeusGhost <amadeus@jmu.edu.cn>. Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com> [add 5.15 changes for 0069-arm-boot-add-dts-files.patch] Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/ipq806x/base-files/etc/board.d/02_network5
-rw-r--r--target/linux/ipq806x/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-tr4400-v2.dts425
-rw-r--r--target/linux/ipq806x/image/generic.mk13
-rw-r--r--target/linux/ipq806x/patches-5.10/0069-arm-boot-add-dts-files.patch3
-rw-r--r--target/linux/ipq806x/patches-5.15/0069-arm-boot-add-dts-files.patch5
6 files changed, 449 insertions, 3 deletions
diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network b/target/linux/ipq806x/base-files/etc/board.d/02_network
index 4cb691f32e..dc9c11e4ba 100644
--- a/target/linux/ipq806x/base-files/etc/board.d/02_network
+++ b/target/linux/ipq806x/base-files/etc/board.d/02_network
@@ -11,6 +11,11 @@ board_config_update
board=$(board_name)
case "$board" in
+arris,tr4400-v2)
+ ucidef_set_interfaces_lan_wan "eth1" "eth2"
+ ucidef_add_switch "switch0" \
+ "1:lan" "2:lan" "3:lan" "4:lan" "6u@eth1" "0u@eth0"
+ ;;
askey,rt4230w-rev6 |\
asrock,g10 |\
nec,wg2600hp)
diff --git a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
index 84ffcd8a15..f9e592f4bd 100644
--- a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
@@ -10,6 +10,7 @@ platform_check_image() {
platform_do_upgrade() {
case "$(board_name)" in
+ arris,tr4400-v2 |\
askey,rt4230w-rev6 |\
compex,wpq864|\
netgear,d7800 |\
diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-tr4400-v2.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-tr4400-v2.dts
new file mode 100644
index 0000000000..871cc09502
--- /dev/null
+++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-tr4400-v2.dts
@@ -0,0 +1,425 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "qcom-ipq8065.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Arris TR4400 v2";
+ compatible = "arris,tr4400-v2", "qcom,ipq8065", "qcom,ipq8064";
+
+ memory@0 {
+ reg = <0x42000000 0x1e000000>;
+ device_type = "memory";
+ };
+
+ aliases {
+ led-boot = &led_status_blue;
+ led-failsafe = &led_status_red;
+ led-running = &led_status_blue;
+ led-upgrade = &led_status_red;
+ };
+
+ chosen {
+ bootargs = "rootfstype=squashfs noinitrd";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ led_status_red: status_red {
+ label = "red:status";
+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_status_blue: status_blue {
+ label = "blue:status";
+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&qcom_pinmux {
+ button_pins: button_pins {
+ mux {
+ pins = "gpio6", "gpio54";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ led_pins: led_pins {
+ mux {
+ pins = "gpio7", "gpio8";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ rgmii2_pins: rgmii2_pins {
+ tx {
+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32";
+ input-disable;
+ };
+ };
+
+ spi_pins: spi_pins {
+ cs {
+ pins = "gpio20";
+ drive-strength = <12>;
+ };
+ };
+};
+
+&gsbi5 {
+ qcom,mode = <GSBI_PROT_SPI>;
+ status = "okay";
+
+ spi@1a280000 {
+ status = "okay";
+
+ pinctrl-0 = <&spi_pins>;
+ pinctrl-names = "default";
+
+ cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
+
+ flash@0 {
+ compatible = "everspin,mr25h256";
+ spi-max-frequency = <40000000>;
+ reg = <0>;
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ nand@0 {
+ reg = <0>;
+ compatible = "qcom,nandcs";
+
+ nand-ecc-strength = <4>;
+ nand-bus-width = <8>;
+ nand-ecc-step-size = <512>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "0:SBL1";
+ reg = <0x0000000 0x0040000>;
+ read-only;
+ };
+ partition@40000 {
+ label = "0:MIBIB";
+ reg = <0x0040000 0x0140000>;
+ read-only;
+ };
+ partition@180000 {
+ label = "0:SBL2";
+ reg = <0x0180000 0x0140000>;
+ read-only;
+ };
+ partition@2c0000 {
+ label = "0:SBL3";
+ reg = <0x02c0000 0x0280000>;
+ read-only;
+ };
+ partition@540000 {
+ label = "0:DDRCONFIG";
+ reg = <0x0540000 0x0120000>;
+ read-only;
+ };
+ partition@660000 {
+ label = "0:SSD";
+ reg = <0x0660000 0x0120000>;
+ read-only;
+ };
+ partition@780000 {
+ label = "0:TZ";
+ reg = <0x0780000 0x0280000>;
+ read-only;
+ };
+ partition@a00000 {
+ label = "0:RPM";
+ reg = <0x0a00000 0x0280000>;
+ read-only;
+ };
+ partition@c80000 {
+ label = "0:APPSBL";
+ reg = <0x0c80000 0x0500000>;
+ read-only;
+ };
+ partition@1180000 {
+ label = "0:APPSBLENV";
+ reg = <0x1180000 0x0080000>;
+ };
+ partition@1200000 {
+ label = "0:ART";
+ reg = <0x1200000 0x0140000>;
+ read-only;
+
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ precal_ART_1000: precal@1000 {
+ reg = <0x1000 0x2f20>;
+ };
+ precal_ART_5000: precal@5000 {
+ reg = <0x5000 0x2f20>;
+ };
+ };
+ stock_partition@1340000 {
+ label = "stock_rootfs";
+ reg = <0x1340000 0x4000000>;
+ };
+ partition@5340000 {
+ label = "0:BOOTCONFIG";
+ reg = <0x5340000 0x0060000>;
+ read-only;
+ };
+ partition@53a0000 {
+ label = "0:SBL2_1";
+ reg = <0x53a0000 0x0140000>;
+ read-only;
+ };
+ partition@54e0000 {
+ label = "0:SBL3_1";
+ reg = <0x54e0000 0x0280000>;
+ read-only;
+ };
+ partition@5760000 {
+ label = "0:DDRCONFIG_1";
+ reg = <0x5760000 0x0120000>;
+ read-only;
+ };
+ partition@5880000 {
+ label = "0:SSD_1";
+ reg = <0x5880000 0x0120000>;
+ read-only;
+ };
+ partition@59a0000 {
+ label = "0:TZ_1";
+ reg = <0x59a0000 0x0280000>;
+ read-only;
+ };
+ partition@5c20000 {
+ label = "0:RPM_1";
+ reg = <0x5c20000 0x0280000>;
+ read-only;
+ };
+ partition@5ea0000 {
+ label = "0:BOOTCONFIG1";
+ reg = <0x5ea0000 0x0060000>;
+ read-only;
+ };
+ partition@5f00000 {
+ label = "0:APPSBL_1";
+ reg = <0x5f00000 0x0500000>;
+ read-only;
+ };
+ stock_partition@6400000 {
+ label = "stock_rootfs_1";
+ reg = <0x6400000 0x4000000>;
+ };
+ stock_partition@a400000 {
+ label = "stock_fw_env";
+ reg = <0xa400000 0x0100000>;
+ };
+ stock_partition@a500000 {
+ label = "stock_config";
+ reg = <0xa500000 0x0800000>;
+ };
+ stock_partition@ad00000 {
+ label = "stock_PKI";
+ reg = <0xad00000 0x0200000>;
+ };
+ stock_partition@af00000 {
+ label = "stock_scfgmgr";
+ reg = <0xaf00000 0x0100000>;
+ };
+
+ partition@6400000 {
+ label = "fw_env";
+ reg = <0x6400000 0x0100000>;
+
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_fw_env_0: macaddr@0 {
+ reg = <0x00 0x6>;
+ };
+ macaddr_fw_env_6: macaddr@6 {
+ reg = <0x06 0x6>;
+ };
+ macaddr_fw_env_c: macaddr@c {
+ reg = <0x0c 0x6>;
+ };
+ macaddr_fw_env_12: macaddr@12 {
+ reg = <0x12 0x6>;
+ };
+ macaddr_fw_env_18: macaddr@18 {
+ reg = <0x18 0x6>;
+ };
+ };
+ partition@6500000 {
+ label = "ubi";
+ reg = <0x6500000 0x9b00000>;
+ };
+ partition@1340000 {
+ label = "extra";
+ reg = <0x1340000 0x4000000>;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ ethernet-phy@0 {
+ reg = <0x0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x7600000 /* PAD0_MODE */
+ 0x00008 0x1000000 /* PAD5_MODE */
+ 0x0000c 0x80 /* PAD6_MODE */
+ 0x000e4 0xaa545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x4e /* PORT0_STATUS */
+ 0x00094 0x4e /* PORT6_STATUS */
+ >;
+ };
+
+ phy7: ethernet-phy@7 {
+ reg = <7>;
+ };
+};
+
+&gmac0 {
+ status = "okay";
+ phy-mode = "rgmii";
+ qcom,id = <0>;
+
+ nvmem-cells = <&macaddr_fw_env_18>;
+ nvmem-cell-names = "mac-address";
+
+ pinctrl-0 = <&rgmii2_pins>;
+ pinctrl-names = "default";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gmac1 {
+ status = "okay";
+ phy-mode = "sgmii";
+ qcom,id = <1>;
+
+ nvmem-cells = <&macaddr_fw_env_0>;
+ nvmem-cell-names = "mac-address";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gmac3 {
+ status = "okay";
+ phy-mode = "sgmii";
+ qcom,id = <3>;
+ phy-handle = <&phy7>;
+
+ nvmem-cells = <&macaddr_fw_env_6>;
+ nvmem-cell-names = "mac-address";
+};
+
+&adm_dma {
+ status = "okay";
+};
+
+&usb3_1 {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+ reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&pcie0_pins>;
+ pinctrl-names = "default";
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi0: wifi@1,0 {
+ compatible = "pci168c,0046";
+ reg = <0x00010000 0 0 0 0>;
+
+ nvmem-cells = <&precal_ART_1000>, <&macaddr_fw_env_12>;
+ nvmem-cell-names = "pre-calibration", "mac-address";
+ };
+ };
+};
+
+&pcie1 {
+ status = "okay";
+ reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&pcie1_pins>;
+ pinctrl-names = "default";
+ max-link-speed = <1>;
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi1: wifi@1,0 {
+ compatible = "pci168c,0040";
+ reg = <0x00010000 0 0 0 0>;
+
+ nvmem-cells = <&precal_ART_5000>, <&macaddr_fw_env_c>;
+ nvmem-cell-names = "pre-calibration", "mac-address";
+ };
+ };
+};
diff --git a/target/linux/ipq806x/image/generic.mk b/target/linux/ipq806x/image/generic.mk
index 819c73d338..469f2c654e 100644
--- a/target/linux/ipq806x/image/generic.mk
+++ b/target/linux/ipq806x/image/generic.mk
@@ -65,6 +65,19 @@ define Device/ZyXELImage
append-metadata
endef
+define Device/arris_tr4400-v2
+ $(call Device/LegacyImage)
+ DEVICE_VENDOR := Arris
+ DEVICE_MODEL := TR4400
+ DEVICE_VARIANT := v2
+ SOC := qcom-ipq8065
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ DEVICE_PACKAGES := ath10k-firmware-qca9984-ct ath10k-firmware-qca99x0-ct
+ KERNEL_IN_UBI := 1
+endef
+TARGET_DEVICES += arris_tr4400-v2
+
define Device/askey_rt4230w-rev6
$(call Device/LegacyImage)
DEVICE_VENDOR := Askey
diff --git a/target/linux/ipq806x/patches-5.10/0069-arm-boot-add-dts-files.patch b/target/linux/ipq806x/patches-5.10/0069-arm-boot-add-dts-files.patch
index 275b960c18..a7eacf311b 100644
--- a/target/linux/ipq806x/patches-5.10/0069-arm-boot-add-dts-files.patch
+++ b/target/linux/ipq806x/patches-5.10/0069-arm-boot-add-dts-files.patch
@@ -10,7 +10,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
-@@ -908,8 +908,29 @@ dtb-$(CONFIG_ARCH_QCOM) += \
+@@ -908,8 +908,30 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-ipq4019-ap.dk04.1-c3.dtb \
qcom-ipq4019-ap.dk07.1-c1.dtb \
qcom-ipq4019-ap.dk07.1-c2.dtb \
@@ -33,6 +33,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
+ qcom-ipq8065-nbg6817.dtb \
+ qcom-ipq8065-r7800.dtb \
+ qcom-ipq8065-rt4230w-rev6.dtb \
++ qcom-ipq8065-tr4400-v2.dtb \
+ qcom-ipq8065-xr500.dtb \
+ qcom-ipq8068-ecw5410.dtb \
+ qcom-ipq8068-mr42.dtb \
diff --git a/target/linux/ipq806x/patches-5.15/0069-arm-boot-add-dts-files.patch b/target/linux/ipq806x/patches-5.15/0069-arm-boot-add-dts-files.patch
index db12b32d94..05f39f6465 100644
--- a/target/linux/ipq806x/patches-5.15/0069-arm-boot-add-dts-files.patch
+++ b/target/linux/ipq806x/patches-5.15/0069-arm-boot-add-dts-files.patch
@@ -10,7 +10,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
-@@ -956,8 +956,29 @@ dtb-$(CONFIG_ARCH_QCOM) += \
+@@ -956,8 +956,30 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-ipq4019-ap.dk04.1-c3.dtb \
qcom-ipq4019-ap.dk07.1-c1.dtb \
qcom-ipq4019-ap.dk07.1-c2.dtb \
@@ -32,8 +32,9 @@ Signed-off-by: John Crispin <john@phrozen.org>
+ qcom-ipq8064-wxr-2533dhp.dtb \
+ qcom-ipq8065-nbg6817.dtb \
+ qcom-ipq8065-r7800.dtb \
-+ qcom-ipq8065-xr500.dtb \
+ qcom-ipq8065-rt4230w-rev6.dtb \
++ qcom-ipq8065-tr4400-v2.dtb \
++ qcom-ipq8065-xr500.dtb \
+ qcom-ipq8068-ecw5410.dtb \
+ qcom-ipq8068-mr42.dtb \
+ qcom-ipq8068-mr52.dtb \