sunxi: switch to kernel 5.15

The testing kernel has been available since early 2022, and is running
fine for several people. Let's switch to it by default.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Tested-by: Karl Palsson <karlp@etactica.com>
Tested-by: Jan-Niklas Burfeind <openwrt@aiyionpri.me>

12 files changed, 1 insertions, 1253 deletions

diff --git a/target/linux/sunxi/Makefile b/target/linux/sunxi/Makefile
index 2a031c2df1..7a2b8af05a 100644
--- a/target/linux/sunxi/Makefile
+++ b/target/linux/sunxi/Makefile
@@ -10,8 +10,7 @@ BOARDNAME:=Allwinner A1x/A20/A3x/H3/H5/R40
 FEATURES:=fpu usb ext4 display rootfs-part rtc squashfs
 SUBTARGETS:=cortexa8 cortexa7 cortexa53
 
-KERNEL_PATCHVER:=5.10
-KERNEL_TESTING_PATCHVER:=5.15
+KERNEL_PATCHVER:=5.15
 
 KERNELNAME:=zImage dtbs
 
diff --git a/target/linux/sunxi/config-5.10 b/target/linux/sunxi/config-5.10
deleted file mode 100644
index caac9e1436..0000000000
--- a/target/linux/sunxi/config-5.10
+++ /dev/null
@@ -1,511 +0,0 @@
-# CONFIG_AHCI_SUNXI is not set
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_NR_GPIO=416
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SUNXI=y
-CONFIG_ARCH_SUNXI_MC_SMP=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARM=y
-# CONFIG_ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM is not set
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
-CONFIG_ARM_CCI=y
-CONFIG_ARM_CCI400_COMMON=y
-CONFIG_ARM_CCI400_PORT_CTRL=y
-CONFIG_ARM_CPU_SUSPEND=y
-CONFIG_ARM_CRYPTO=y
-CONFIG_ARM_ERRATA_643719=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_HEAVY_MB=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_ARM_LPAE=y
-CONFIG_ARM_PATCH_IDIV=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_PSCI=y
-CONFIG_ARM_PSCI_FW=y
-CONFIG_ARM_THUMB=y
-CONFIG_ARM_UNWIND=y
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_ATA=y
-CONFIG_ATAGS=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_AXP20X_POWER=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_PWM=y
-CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_PM=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_BOUNCE=y
-CONFIG_CACHE_L2X0=y
-CONFIG_CAN=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLK_SUNXI=y
-CONFIG_CLK_SUNXI_CLOCKS=y
-CONFIG_CLK_SUNXI_PRCM_SUN6I=y
-CONFIG_CLK_SUNXI_PRCM_SUN8I=y
-CONFIG_CLK_SUNXI_PRCM_SUN9I=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_CONNECTOR=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_COREDUMP=y
-CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
-CONFIG_CPUFREQ_DT=y
-CONFIG_CPUFREQ_DT_PLATDEV=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_ATTR_SET=y
-CONFIG_CPU_FREQ_GOV_COMMON=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_SPECTRE=y
-CONFIG_CPU_THERMAL=y
-CONFIG_CPU_THUMB_CAPABLE=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRC16=y
-CONFIG_CRC_T10DIF=y
-CONFIG_CRYPTO_CRC32=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CRCT10DIF=y
-CONFIG_CRYPTO_CRCT10DIF_ARM_CE=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_DEV_ALLWINNER=y
-CONFIG_CRYPTO_DEV_SUN4I_SS=y
-CONFIG_CRYPTO_DEV_SUN4I_SS_PRNG=y
-# CONFIG_CRYPTO_DEV_SUN8I_CE is not set
-# CONFIG_CRYPTO_DEV_SUN8I_SS is not set
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_LIB_DES=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_DMADEVICES=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_OPS=y
-CONFIG_DMA_REMAP=y
-CONFIG_DMA_SUN4I=y
-CONFIG_DMA_SUN6I=y
-CONFIG_DMA_VIRTUAL_CHANNELS=y
-CONFIG_DNOTIFY=y
-CONFIG_DTC=y
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_DVB_CORE=y
-CONFIG_DWMAC_GENERIC=y
-# CONFIG_DWMAC_SUN8I is not set
-CONFIG_DWMAC_SUNXI=y
-CONFIG_DYNAMIC_DEBUG=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_ELF_CORE=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_EXT4_FS=y
-CONFIG_EXTCON=y
-CONFIG_F2FS_FS=y
-CONFIG_FAT_FS=y
-CONFIG_FB=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_CMDLINE=y
-CONFIG_FB_FOREIGN_ENDIAN=y
-CONFIG_FB_LITTLE_ENDIAN=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_SIMPLE=y
-CONFIG_FB_TILEBLITTING=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FONT_8x16=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_SUPPORT=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FRAME_WARN=2048
-CONFIG_FREEZER=y
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FW_CACHE=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MIGRATION=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_VDSO_32=y
-CONFIG_GLOB=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_SMP=y
-CONFIG_HIGHMEM=y
-CONFIG_HIGHPTE=y
-CONFIG_HOTPLUG_CPU=y
-CONFIG_HWMON=y
-CONFIG_HW_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_TIMERIOMEM=y
-CONFIG_HZ_FIXED=0
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_COMPAT=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_MV64XXX=y
-CONFIG_I2C_SUN6I_P2WI=y
-CONFIG_IIO=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INPUT=y
-CONFIG_INPUT_AXP20X_PEK=y
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_JBD2=y
-CONFIG_KALLSYMS=y
-CONFIG_KEYBOARD_SUN4I_LRADC=y
-CONFIG_KSM=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_PLATFORM=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_MACH_SUN4I=y
-CONFIG_MACH_SUN5I=y
-CONFIG_MACH_SUN6I=y
-CONFIG_MACH_SUN7I=y
-CONFIG_MACH_SUN8I=y
-CONFIG_MACH_SUN9I=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_DEVRES=y
-CONFIG_MDIO_SUN4I=y
-CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
-CONFIG_MEDIA_ATTACH=y
-CONFIG_MEDIA_CAMERA_SUPPORT=y
-CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
-CONFIG_MEDIA_PLATFORM_SUPPORT=y
-CONFIG_MEDIA_RADIO_SUPPORT=y
-CONFIG_MEDIA_SDR_SUPPORT=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_MEDIA_TEST_SUPPORT=y
-CONFIG_MEDIA_TUNER=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MFD_AXP20X=y
-CONFIG_MFD_AXP20X_I2C=y
-CONFIG_MFD_AXP20X_RSB=y
-CONFIG_MFD_CORE=y
-CONFIG_MFD_SUN6I_PRCM=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_SUNXI=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_FIT_FW=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEON=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_PTP_CLASSIFY=y
-CONFIG_NET_VENDOR_ALLWINNER=y
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NO_HZ=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NR_CPUS=8
-CONFIG_NVMEM=y
-CONFIG_NVMEM_SUNXI_SID=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_PADATA=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PAGE_POOL=y
-CONFIG_PCS_XPCS=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=3
-CONFIG_PHYLIB=y
-CONFIG_PHYLINK=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_PHY_SUN4I_USB=y
-# CONFIG_PHY_SUN50I_USB3 is not set
-# CONFIG_PHY_SUN6I_MIPI_DPHY is not set
-CONFIG_PHY_SUN9I_USB=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_AXP209=y
-CONFIG_PINCTRL_SUN4I_A10=y
-# CONFIG_PINCTRL_SUN50I_A100 is not set
-# CONFIG_PINCTRL_SUN50I_A100_R is not set
-# CONFIG_PINCTRL_SUN50I_A64 is not set
-# CONFIG_PINCTRL_SUN50I_A64_R is not set
-# CONFIG_PINCTRL_SUN50I_H5 is not set
-# CONFIG_PINCTRL_SUN50I_H6 is not set
-# CONFIG_PINCTRL_SUN50I_H6_R is not set
-CONFIG_PINCTRL_SUN5I=y
-CONFIG_PINCTRL_SUN6I_A31=y
-CONFIG_PINCTRL_SUN6I_A31_R=y
-CONFIG_PINCTRL_SUN8I_A23=y
-CONFIG_PINCTRL_SUN8I_A23_R=y
-CONFIG_PINCTRL_SUN8I_A33=y
-CONFIG_PINCTRL_SUN8I_A83T=y
-CONFIG_PINCTRL_SUN8I_A83T_R=y
-CONFIG_PINCTRL_SUN8I_H3=y
-CONFIG_PINCTRL_SUN8I_H3_R=y
-CONFIG_PINCTRL_SUN8I_V3S=y
-CONFIG_PINCTRL_SUN9I_A80=y
-CONFIG_PINCTRL_SUN9I_A80_R=y
-CONFIG_PINCTRL_SUNXI=y
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-CONFIG_PM_OPP=y
-CONFIG_PM_SLEEP=y
-CONFIG_PM_SLEEP_SMP=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PPS=y
-CONFIG_PRINTK_TIME=y
-CONFIG_PROC_EVENTS=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_PTP_1588_CLOCK=y
-CONFIG_PWM=y
-CONFIG_PWM_SUN4I=y
-CONFIG_PWM_SYSFS=y
-CONFIG_RATIONAL=y
-CONFIG_REALTEK_PHY=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_IRQ=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGMAP_SPI=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_AXP20X=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_GPIO=y
-CONFIG_REGULATOR_SY8106A=y
-CONFIG_RELAY=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RESET_SIMPLE=y
-CONFIG_RESET_SUNXI=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_SATA_HOST=y
-CONFIG_SATA_PMP=y
-CONFIG_SCSI=y
-CONFIG_SDIO_UART=y
-CONFIG_SECURITYFS=y
-CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
-CONFIG_SERIAL_8250_DW=y
-CONFIG_SERIAL_8250_DWLIB=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_NR_UARTS=8
-CONFIG_SERIAL_8250_RUNTIME_UARTS=8
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SG_POOL=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SND=y
-CONFIG_SND_COMPRESS_OFFLOAD=y
-CONFIG_SND_JACK=y
-CONFIG_SND_JACK_INPUT_DEV=y
-CONFIG_SND_PCM=y
-CONFIG_SND_SIMPLE_CARD=y
-CONFIG_SND_SIMPLE_CARD_UTILS=y
-CONFIG_SND_SOC=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SUN4I_I2S is not set
-# CONFIG_SND_SUN4I_SPDIF is not set
-# CONFIG_SND_SUN8I_CODEC is not set
-# CONFIG_SND_SUN8I_CODEC_ANALOG is not set
-CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SPI_SUN4I=y
-CONFIG_SPI_SUN6I=y
-CONFIG_SRCU=y
-CONFIG_STMMAC_ETH=y
-CONFIG_STMMAC_PLATFORM=y
-# CONFIG_STMMAC_SELFTESTS is not set
-CONFIG_SUN4I_A10_CCU=y
-# CONFIG_SUN4I_EMAC is not set
-CONFIG_SUN4I_TIMER=y
-CONFIG_SUN5I_CCU=y
-CONFIG_SUN5I_HSTIMER=y
-CONFIG_SUN6I_A31_CCU=y
-CONFIG_SUN8I_A23_CCU=y
-CONFIG_SUN8I_A33_CCU=y
-CONFIG_SUN8I_A83T_CCU=y
-CONFIG_SUN8I_DE2_CCU=y
-CONFIG_SUN8I_H3_CCU=y
-CONFIG_SUN8I_R40_CCU=y
-CONFIG_SUN8I_R_CCU=y
-CONFIG_SUN8I_THERMAL=y
-CONFIG_SUN8I_V3S_CCU=y
-CONFIG_SUN9I_A80_CCU=y
-CONFIG_SUNXI_CCU=y
-CONFIG_SUNXI_RSB=y
-CONFIG_SUNXI_SRAM=y
-CONFIG_SUNXI_WATCHDOG=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_SWIOTLB=y
-CONFIG_SWPHY=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYSFS_SYSCALL=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_HWMON=y
-CONFIG_THERMAL_OF=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_TOUCHSCREEN_PROPERTIES=y
-CONFIG_TOUCHSCREEN_SUN4I=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_UNWINDER_ARM=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_COMMON=y
-CONFIG_USB_DWC2=y
-CONFIG_USB_DWC2_HOST=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_HCD_PLATFORM=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_NET_DRIVERS=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PLATFORM=y
-CONFIG_USB_ROLE_SWITCH=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USERIO=y
-CONFIG_USE_OF=y
-CONFIG_VFAT_FS=y
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_VHOST=y
-CONFIG_VHOST_IOTLB=y
-CONFIG_VHOST_NET=y
-# CONFIG_VIDEO_SUN4I_CSI is not set
-# CONFIG_VIDEO_SUN6I_CSI is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_VT_CONSOLE_SLEEP=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XPS=y
-CONFIG_XXHASH=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_ZBOOT_ROM_TEXT=0
diff --git a/target/linux/sunxi/patches-5.10/062-add-sun8i-h3-zeropi-support.patch b/target/linux/sunxi/patches-5.10/062-add-sun8i-h3-zeropi-support.patch
deleted file mode 100644
index 3dd37fedba..0000000000
--- a/target/linux/sunxi/patches-5.10/062-add-sun8i-h3-zeropi-support.patch
+++ /dev/null
@@ -1,79 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -1204,6 +1204,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
- 	sun8i-h3-orangepi-zero-plus2.dtb \
- 	sun8i-h3-rervision-dvk.dtb \
- 	sun8i-h3-emlid-neutis-n5h3-devboard.dtb \
-+	sun8i-h3-zeropi.dtb \
- 	sun8i-r16-bananapi-m2m.dtb \
- 	sun8i-r16-nintendo-nes-classic.dtb \
- 	sun8i-r16-nintendo-super-nes-classic.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/sun8i-h3-zeropi.dts
-@@ -0,0 +1,66 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+
-+#include "sun8i-h3-nanopi.dtsi"
-+
-+/ {
-+	model = "FriendlyElec ZeroPi";
-+	compatible = "friendlyarm,zeropi", "allwinner,sun8i-h3";
-+
-+	aliases {
-+		ethernet0 = &emac;
-+	};
-+
-+	reg_gmac_3v3: gmac-3v3 {
-+		compatible = "regulator-fixed";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&gmac_power_pin_nanopi>;
-+		regulator-name = "gmac-3v3";
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		startup-delay-us = <100000>;
-+		enable-active-high;
-+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
-+	};
-+};
-+
-+&ehci0 {
-+	status = "okay";
-+};
-+
-+&ohci0 {
-+	status = "okay";
-+};
-+
-+&pio {
-+	gmac_power_pin_nanopi: gmac_power_pin@0 {
-+		pins = "PD6";
-+		function = "gpio_out";
-+	};
-+};
-+
-+&external_mdio {
-+	ext_rgmii_phy: ethernet-phy@1 {
-+		compatible = "ethernet-phy-ieee802.3-c22";
-+		reg = <7>;
-+	};
-+};
-+
-+&emac {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&emac_rgmii_pins>;
-+	phy-supply = <&reg_gmac_3v3>;
-+	phy-handle = <&ext_rgmii_phy>;
-+	phy-mode = "rgmii";
-+
-+	allwinner,leds-active-low;
-+	status = "okay";
-+};
-+
-+&usb_otg {
-+	status = "okay";
-+	dr_mode = "peripheral";
-+};
-+
-+&usbphy {
-+	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
-+};
diff --git a/target/linux/sunxi/patches-5.10/100-sunxi-h3-add-support-for-nanopi-r1.patch b/target/linux/sunxi/patches-5.10/100-sunxi-h3-add-support-for-nanopi-r1.patch
deleted file mode 100644
index cbdf5ed3d4..0000000000
--- a/target/linux/sunxi/patches-5.10/100-sunxi-h3-add-support-for-nanopi-r1.patch
+++ /dev/null
@@ -1,186 +0,0 @@
-From 5aee0b1272cd5b42933ef629d66b677669e2e8d2 Mon Sep 17 00:00:00 2001
-From: Jayantajit Gogoi <jayanta.gogoi525@gmail.com>
-Date: Mon, 12 Oct 2020 05:24:51 +0000
-Subject: [PATCH] sunxi: add support for friendlyarm nanopi r1
-
-Signed-off-by: Jayantajit Gogoi <jayanta.gogoi525@gmail.com>
----
- .../devicetree/bindings/arm/sunxi.yaml        |   5 +
- arch/arm/boot/dts/Makefile                    |   1 +
- arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts      | 146 ++++++++++++++++++
- 3 files changed, 152 insertions(+)
- create mode 100644 arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts
-
---- a/Documentation/devicetree/bindings/arm/sunxi.yaml
-+++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
-@@ -251,6 +251,11 @@ properties:
-           - const: friendlyarm,nanopi-neo-plus2
-           - const: allwinner,sun50i-h5
- 
-+      - description: FriendlyARM NanoPi R1
-+        items:
-+          - const: friendlyarm,nanopi-r1
-+          - const: allwinner,sun8i-h3
-+
-       - description: Gemei G9 Tablet
-         items:
-           - const: gemei,g9
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -1194,6 +1194,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
- 	sun8i-h3-nanopi-m1-plus.dtb \
- 	sun8i-h3-nanopi-neo.dtb \
- 	sun8i-h3-nanopi-neo-air.dtb \
-+	sun8i-h3-nanopi-r1.dtb \
- 	sun8i-h3-orangepi-2.dtb \
- 	sun8i-h3-orangepi-lite.dtb \
- 	sun8i-h3-orangepi-one.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts
-@@ -0,0 +1,146 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright (C) 2019 Igor Pecovnik <igor@armbian.com>
-+ * Copyright (C) 2020 Jayantajit Gogoi <jayanta.gogoi525@gmail.com>
-+ */
-+
-+/* NanoPi R1 is based on the NanoPi-H3 design from FriendlyARM */
-+#include "sun8i-h3-nanopi.dtsi"
-+
-+/ {
-+	model = "FriendlyARM NanoPi R1";
-+	compatible = "friendlyarm,nanopi-r1", "allwinner,sun8i-h3";
-+
-+	reg_gmac_3v3: gmac-3v3 {
-+		compatible = "regulator-fixed";
-+		regulator-name = "gmac-3v3";
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		startup-delay-us = <100000>;
-+		enable-active-high;
-+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
-+	};
-+
-+	vdd_cpux: gpio-regulator {
-+		compatible = "regulator-gpio";
-+		pinctrl-names = "default";
-+		regulator-name = "vdd-cpux";
-+		regulator-type = "voltage";
-+		regulator-boot-on;
-+		regulator-always-on;
-+		regulator-min-microvolt = <1100000>;
-+		regulator-max-microvolt = <1300000>;
-+		regulator-ramp-delay = <50>;
-+		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>;
-+		gpios-states = <0x1>;
-+		states = <1100000 0x0
-+			  1300000 0x1>;
-+	};
-+
-+	wifi_pwrseq: wifi_pwrseq {
-+		compatible = "mmc-pwrseq-simple";
-+		pinctrl-names = "default";
-+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>;
-+	};
-+
-+	leds {
-+		/delete-node/ pwr;
-+		status {
-+			label = "nanopi:red:status";
-+			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
-+			linux,default-trigger = "heartbeat";
-+		};
-+
-+		wan {
-+			label = "nanopi:green:wan";
-+			gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>;
-+		};
-+
-+		lan {
-+			label = "nanopi:green:lan";
-+			gpios = <&pio 0 9 GPIO_ACTIVE_HIGH>;
-+		};
-+	};
-+
-+	r_gpio_keys {
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&sw_r_npi>;
-+
-+		/delete-node/ k1;
-+		reset {
-+			label = "reset";
-+			linux,code = <KEY_RESTART>;
-+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+};
-+
-+&cpu0 {
-+	cpu-supply = <&vdd_cpux>;
-+};
-+
-+&ehci1 {
-+	status = "okay";
-+};
-+
-+&ehci2 {
-+	status = "okay";
-+};
-+
-+&emac {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&emac_rgmii_pins>;
-+	phy-supply = <&reg_gmac_3v3>;
-+	phy-handle = <&ext_rgmii_phy>;
-+	phy-mode = "rgmii";
-+	status = "okay";
-+};
-+
-+&external_mdio {
-+	ext_rgmii_phy: ethernet-phy@1 {
-+		compatible = "ethernet-phy-ieee802.3-c22";
-+		reg = <7>;
-+	};
-+};
-+
-+&mmc1 {
-+	vmmc-supply = <&reg_vcc3v3>;
-+	vqmmc-supply = <&reg_vcc3v3>;
-+	mmc-pwrseq = <&wifi_pwrseq>;
-+	bus-width = <4>;
-+	non-removable;
-+	status = "okay";
-+
-+	sdio_wifi: sdio_wifi@1 {
-+		reg = <1>;
-+		compatible = "brcm,bcm4329-fmac";
-+		interrupt-parent = <&pio>;
-+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>;
-+		interrupt-names = "host-wake";
-+	};
-+};
-+
-+&mmc2 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&mmc2_8bit_pins>;
-+	vmmc-supply = <&reg_vcc3v3>;
-+	vqmmc-supply = <&reg_vcc3v3>;
-+	bus-width = <8>;
-+	non-removable;
-+	status = "okay";
-+};
-+
-+&ohci1 {
-+	status = "okay";
-+};
-+
-+&ohci2 {
-+	status = "okay";
-+};
-+
-+&r_pio {
-+	sw_r_npi: key_pins {
-+		pins = "PL3";
-+		function = "gpio_in";
-+	};
-+};
diff --git a/target/linux/sunxi/patches-5.10/101-sunxi-h5-add-support-for-nanopi-r1s-h5.patch b/target/linux/sunxi/patches-5.10/101-sunxi-h5-add-support-for-nanopi-r1s-h5.patch
deleted file mode 100644
index e0c25bcb53..0000000000
--- a/target/linux/sunxi/patches-5.10/101-sunxi-h5-add-support-for-nanopi-r1s-h5.patch
+++ /dev/null
@@ -1,230 +0,0 @@
-From 9962cb9be2db877c232aaf00db40125c0d7bf4bc Mon Sep 17 00:00:00 2001
-From: Chukun Pan <amadeus@jmu.edu.cn>
-Date: Mon, 17 May 2021 00:35:22 +0800
-Subject: [PATCH] arm64: dts: allwinner: h5: Add NanoPi R1S H5 support
-
-The NanoPi R1S H5 is a open source board made by FriendlyElec.
-It has the following features:
-
-- Allwinner H5, Quad-core Cortex-A53
-- 512MB DDR3 RAM
-- 10/100/1000M Ethernet x 2
-- RTL8189ETV WiFi 802.11b/g/n
-- USB 2.0 host port (A)
-- MicroSD Slot
-- Serial Debug Port
-- 5V 2A DC power-supply
-
-Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
-Signed-off-by: Maxime Ripard <maxime@cerno.tech>
-Link: https://lore.kernel.org/r/20210516163523.9484-2-amadeus@jmu.edu.cn
----
- arch/arm64/boot/dts/allwinner/Makefile        |   1 +
- .../dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts | 195 ++++++++++++++++++
- 2 files changed, 196 insertions(+)
- create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
-
---- a/arch/arm64/boot/dts/allwinner/Makefile
-+++ b/arch/arm64/boot/dts/allwinner/Makefile
-@@ -24,6 +24,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-li
- dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h5-cc.dtb
- dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb
- dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-plus2.dtb
-+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-r1s-h5.dtb
- dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb
- dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb
- dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus.dtb
---- /dev/null
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
-@@ -0,0 +1,191 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright (C) 2021 Chukun Pan <amadeus@jmu.edu.cn>
-+ *
-+ * Based on sun50i-h5-nanopi-neo-plus2.dts, which is:
-+ *   Copyright (C) 2017 Antony Antony <antony@phenome.org>
-+ *   Copyright (C) 2016 ARM Ltd.
-+ */
-+
-+/dts-v1/;
-+#include "sun50i-h5.dtsi"
-+#include "sun50i-h5-cpu-opp.dtsi"
-+
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
-+
-+/ {
-+	model = "FriendlyARM NanoPi R1S H5";
-+	compatible = "friendlyarm,nanopi-r1s-h5", "allwinner,sun50i-h5";
-+
-+	aliases {
-+		ethernet0 = &emac;
-+		ethernet1 = &rtl8189etv;
-+		serial0 = &uart0;
-+	};
-+
-+	chosen {
-+		stdout-path = "serial0:115200n8";
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+
-+		sys {
-+			label = "nanopi:red:sys";
-+			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
-+			linux,default-trigger = "heartbeat";
-+		};
-+
-+		lan {
-+			label = "nanopi:green:lan";
-+			gpios = <&pio 0 9 GPIO_ACTIVE_HIGH>;
-+		};
-+
-+		wan {
-+			label = "nanopi:green:wan";
-+			gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>;
-+		};
-+	};
-+
-+	r-gpio-keys {
-+		compatible = "gpio-keys";
-+
-+		reset {
-+			label = "reset";
-+			linux,code = <KEY_RESTART>;
-+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+
-+	reg_gmac_3v3: gmac-3v3 {
-+		compatible = "regulator-fixed";
-+		regulator-name = "gmac-3v3";
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		startup-delay-us = <100000>;
-+		enable-active-high;
-+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
-+	};
-+
-+	reg_vcc3v3: vcc3v3 {
-+		compatible = "regulator-fixed";
-+		regulator-name = "vcc3v3";
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+	};
-+
-+	reg_usb0_vbus: usb0-vbus {
-+		compatible = "regulator-fixed";
-+		regulator-name = "usb0-vbus";
-+		regulator-min-microvolt = <5000000>;
-+		regulator-max-microvolt = <5000000>;
-+		enable-active-high;
-+		gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
-+		status = "okay";
-+	};
-+
-+	vdd_cpux: gpio-regulator {
-+		compatible = "regulator-gpio";
-+		regulator-name = "vdd-cpux";
-+		regulator-type = "voltage";
-+		regulator-boot-on;
-+		regulator-always-on;
-+		regulator-min-microvolt = <1100000>;
-+		regulator-max-microvolt = <1300000>;
-+		regulator-ramp-delay = <50>; /* 4ms */
-+		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>;
-+		gpios-states = <0x1>;
-+		states = <1100000 0x0>, <1300000 0x1>;
-+	};
-+
-+	wifi_pwrseq: wifi_pwrseq {
-+		compatible = "mmc-pwrseq-simple";
-+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
-+		post-power-on-delay-ms = <200>;
-+	};
-+};
-+
-+&cpu0 {
-+	cpu-supply = <&vdd_cpux>;
-+};
-+
-+&ehci1 {
-+	status = "okay";
-+};
-+
-+&ehci2 {
-+	status = "okay";
-+};
-+
-+&emac {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&emac_rgmii_pins>;
-+	phy-supply = <&reg_gmac_3v3>;
-+	phy-handle = <&ext_rgmii_phy>;
-+	phy-mode = "rgmii-id";
-+	status = "okay";
-+};
-+
-+&external_mdio {
-+	ext_rgmii_phy: ethernet-phy@7 {
-+		compatible = "ethernet-phy-ieee802.3-c22";
-+		reg = <7>;
-+	};
-+};
-+
-+&i2c0 {
-+	status = "okay";
-+
-+	eeprom@51 {
-+		compatible = "microchip,24c02";
-+		reg = <0x51>;
-+		pagesize = <16>;
-+	};
-+};
-+
-+&mmc0 {
-+	vmmc-supply = <&reg_vcc3v3>;
-+	bus-width = <4>;
-+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
-+	status = "okay";
-+};
-+
-+&mmc1 {
-+	vmmc-supply = <&reg_vcc3v3>;
-+	vqmmc-supply = <&reg_vcc3v3>;
-+	mmc-pwrseq = <&wifi_pwrseq>;
-+	bus-width = <4>;
-+	non-removable;
-+	status = "okay";
-+
-+	rtl8189etv: sdio_wifi@1 {
-+		reg = <1>;
-+	};
-+};
-+
-+&ohci1 {
-+	status = "okay";
-+};
-+
-+&ohci2 {
-+	status = "okay";
-+};
-+
-+&uart0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&uart0_pa_pins>;
-+	status = "okay";
-+};
-+
-+&usb_otg {
-+	dr_mode = "peripheral";
-+	status = "okay";
-+};
-+
-+&usbphy {
-+	/* USB Type-A port's VBUS is always on */
-+	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
-+	usb0_vbus-supply = <&reg_usb0_vbus>;
-+	status = "okay";
-+};
diff --git a/target/linux/sunxi/patches-5.10/102-sunxi-add-OF-node-for-USB-eth-on-NanoPi-R1S-H5.patch b/target/linux/sunxi/patches-5.10/102-sunxi-add-OF-node-for-USB-eth-on-NanoPi-R1S-H5.patch
deleted file mode 100644
index e14311aa64..0000000000
--- a/target/linux/sunxi/patches-5.10/102-sunxi-add-OF-node-for-USB-eth-on-NanoPi-R1S-H5.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From a896bc1d79e3c00f0aacfe225499d811775616f3 Mon Sep 17 00:00:00 2001
-From: Chukun Pan <amadeus@jmu.edu.cn>
-Date: Sun, 10 Oct 2021 21:50:17 +0800
-Subject: [PATCH] arm64: allwinner: add OF node for USB eth on NanoPi R1S H5
-
-This adds the OF node for the USB3 ethernet adapter on the FriendlyARM
-NanoPi R1S H5. Add the correct value for the RTL8153 LED configuration
-register to match the blink behavior of the other port on the device.
-
-Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
----
- arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts | 7 +++++++
- 1 file changed, 7 insertions(+)
-
---- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
-@@ -112,6 +112,13 @@
- 
- &ehci1 {
- 	status = "okay";
-+
-+	usb-eth@1 {
-+		compatible = "realtek,rtl8153";
-+		reg = <1>;
-+
-+		realtek,led-data = <0x78>;
-+	};
- };
- 
- &ehci2 {
diff --git a/target/linux/sunxi/patches-5.10/301-orangepi_pc2_usb_otg_to_host_key_power.patch b/target/linux/sunxi/patches-5.10/301-orangepi_pc2_usb_otg_to_host_key_power.patch
deleted file mode 100644
index 427911c94e..0000000000
--- a/target/linux/sunxi/patches-5.10/301-orangepi_pc2_usb_otg_to_host_key_power.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
-@@ -59,7 +59,7 @@
- 
- 		sw4 {
- 			label = "sw4";
--			linux,code = <BTN_0>;
-+			linux,code = <KEY_POWER>;
- 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
- 			wakeup-source;
- 		};
-@@ -220,7 +220,7 @@
- };
- 
- &usb_otg {
--	dr_mode = "otg";
-+	dr_mode = "host";
- 	status = "okay";
- };
- 
diff --git a/target/linux/sunxi/patches-5.10/400-arm64-allwinner-a64-sopine-Add-Sopine-flash-partitio.patch b/target/linux/sunxi/patches-5.10/400-arm64-allwinner-a64-sopine-Add-Sopine-flash-partitio.patch
deleted file mode 100644
index a8dfcd9dbc..0000000000
--- a/target/linux/sunxi/patches-5.10/400-arm64-allwinner-a64-sopine-Add-Sopine-flash-partitio.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From 7d87d3dafc4b1ea5659eb71ee6c5fd5308490d1f Mon Sep 17 00:00:00 2001
-From: Oskari Lemmela <oskari@lemmela.net>
-Date: Mon, 31 Dec 2018 07:44:49 +0200
-Subject: [PATCH] arm64: allwinner: a64-sopine: Add Sopine flash partitions.
-
-First 896kB to u-boot. Enough space for SPL, u-boot and ATF.
-Next 128kB to u-boot environment and rest to firmware.
-
-Firmware partition is compatible FIT image dynamic splitting.
-
-Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
----
- .../boot/dts/allwinner/sun50i-a64-sopine.dtsi | 22 +++++++++++++++++++
- 1 file changed, 22 insertions(+)
-
---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
-@@ -58,6 +58,28 @@
- 		compatible = "jedec,spi-nor";
- 		reg = <0>;
- 		spi-max-frequency = <40000000>;
-+
-+		partitions {
-+			compatible = "fixed-partitions";
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+
-+			partition@0 {
-+				label = "u-boot";
-+				reg = <0x000000 0x0E0000>;
-+			};
-+
-+			partition@e0000 {
-+				label = "u-boot-env";
-+				reg = <0x0E0000 0x020000>;
-+			};
-+
-+			partition@100000 {
-+				compatible = "denx,fit";
-+				label = "firmware";
-+				reg = <0x100000 0xF00000>;
-+			};
-+		};
- 	};
- };
- 
diff --git a/target/linux/sunxi/patches-5.10/430-arm64-dts-allwinner-a64-olinuxino-add-status-LED-ali.patch b/target/linux/sunxi/patches-5.10/430-arm64-dts-allwinner-a64-olinuxino-add-status-LED-ali.patch
deleted file mode 100644
index 68ec333e37..0000000000
--- a/target/linux/sunxi/patches-5.10/430-arm64-dts-allwinner-a64-olinuxino-add-status-LED-ali.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Petr=20=C5=A0tetiar?= <ynezz@true.cz>
-Date: Thu, 26 Mar 2020 10:09:19 +0100
-Subject: [PATCH] arm64: dts: allwinner: a64: olinuxino: add status LED aliases
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Petr Štetiar <ynezz@true.cz>
-
---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
-@@ -15,6 +15,10 @@
- 	aliases {
- 		ethernet0 = &emac;
- 		serial0 = &uart0;
-+		led-boot = &led_user;
-+		led-failsafe = &led_user;
-+		led-running = &led_user;
-+		led-upgrade = &led_user;
- 	};
- 
- 	chosen {
-@@ -35,7 +39,7 @@
- 	leds {
- 		compatible = "gpio-leds";
- 
--		led-0 {
-+		led_user: led-0 {
- 			label = "a64-olinuxino:red:user";
- 			gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
- 		};
diff --git a/target/linux/sunxi/patches-5.10/431-arm64-dts-allwinner-nanopi-r1s-h5-add-status-LED.patch b/target/linux/sunxi/patches-5.10/431-arm64-dts-allwinner-nanopi-r1s-h5-add-status-LED.patch
deleted file mode 100644
index 4a429c746e..0000000000
--- a/target/linux/sunxi/patches-5.10/431-arm64-dts-allwinner-nanopi-r1s-h5-add-status-LED.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From 1845163a052efac124f00656eb72f38947630a42 Mon Sep 17 00:00:00 2001
-From: Chukun Pan <amadeus@jmu.edu.cn>
-Date: Sun, 10 Oct 2021 21:50:18 +0800
-Subject: [PATCH] arm64: dts: allwinner: NanoPi R1S H5: add status LED aliases
-
-Use the SYS LED on the casing for showing system status.
-
-Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
----
- arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts | 7 ++++++-
- 1 file changed, 6 insertions(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
-@@ -22,6 +22,11 @@
- 		ethernet0 = &emac;
- 		ethernet1 = &rtl8189etv;
- 		serial0 = &uart0;
-+
-+		led-boot = &led_sys;
-+		led-failsafe = &led_sys;
-+		led-running = &led_sys;
-+		led-upgrade = &led_sys;
- 	};
- 
- 	chosen {
-@@ -31,7 +36,7 @@
- 	leds {
- 		compatible = "gpio-leds";
- 
--		sys {
-+		led_sys: sys {
- 			label = "nanopi:red:sys";
- 			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
- 			linux,default-trigger = "heartbeat";
diff --git a/target/linux/sunxi/patches-5.10/442-arm64-dts-orangepi-one-plus-enable-PWM.patch b/target/linux/sunxi/patches-5.10/442-arm64-dts-orangepi-one-plus-enable-PWM.patch
deleted file mode 100644
index 76a73ee1f0..0000000000
--- a/target/linux/sunxi/patches-5.10/442-arm64-dts-orangepi-one-plus-enable-PWM.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts
-@@ -41,3 +41,7 @@
- 		reg = <1>;
- 	};
- };
-+
-+&pwm {
-+	status = "okay";
-+};
diff --git a/target/linux/sunxi/patches-5.10/450-arm64-dts-enable-wifi-on-pine64-boards.patch b/target/linux/sunxi/patches-5.10/450-arm64-dts-enable-wifi-on-pine64-boards.patch
deleted file mode 100644
index 3876852c2b..0000000000
--- a/target/linux/sunxi/patches-5.10/450-arm64-dts-enable-wifi-on-pine64-boards.patch
+++ /dev/null
@@ -1,72 +0,0 @@
---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
-@@ -42,6 +42,11 @@
- 		regulator-min-microvolt = <1800000>;
- 		regulator-max-microvolt = <1800000>;
- 	};
-+
-+	wifi_pwrseq: wifi_pwrseq {
-+		compatible = "mmc-pwrseq-simple";
-+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
-+	};
- };
- 
- &ac_power_supply {
-@@ -102,6 +107,21 @@
- 		reg = <1>;
- 	};
- };
-+
-+&mmc1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&mmc1_pins>;
-+	vmmc-supply = <&reg_dldo4>;
-+	vqmmc-supply = <&reg_eldo1>;
-+	mmc-pwrseq = <&wifi_pwrseq>;
-+	bus-width = <4>;
-+	non-removable;
-+	status = "okay";
-+
-+	rtl8723cs: wifi@1 {
-+		reg = <1>;
-+	};
-+};
- 
- &mmc2 {
- 	pinctrl-names = "default";
---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
-@@ -35,6 +35,11 @@
- 			};
- 		};
- 	};
-+
-+	wifi_pwrseq: wifi_pwrseq {
-+		compatible = "mmc-pwrseq-simple";
-+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
-+	};
- };
- 
- &codec {
-@@ -124,6 +129,21 @@
- 	status = "okay";
- };
- 
-+&mmc1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&mmc1_pins>;
-+	vmmc-supply = <&reg_dldo4>;
-+	vqmmc-supply = <&reg_eldo1>;
-+	mmc-pwrseq = <&wifi_pwrseq>;
-+	bus-width = <4>;
-+	non-removable;
-+	status = "okay";
-+
-+	rtl8723cs: wifi@1 {
-+		reg = <1>;
-+	};
-+};
-+
- &ohci0 {
- 	status = "okay";
- };