diff options
| author | Tomasz Maciej Nowak <tmn505@gmail.com> | 2021-05-24 14:41:15 +0200 |
|---|---|---|
| committer | Hauke Mehrtens <hauke@hauke-m.de> | 2021-06-06 00:26:13 +0200 |
| commit | 09448d8ff30d7c1474c8dd0a762efe0417c471bd (patch) | |
| tree | 3d75512378bbd49621b73dfc162a1cdacc197cca /target/linux/sunxi/image/cortexa7.mk | |
| parent | e9c9b5ec72e4ec8add23515a76bd5de5e7cac2a1 (diff) | |
| download | upstream-09448d8ff30d7c1474c8dd0a762efe0417c471bd.tar.gz upstream-09448d8ff30d7c1474c8dd0a762efe0417c471bd.tar.bz2 upstream-09448d8ff30d7c1474c8dd0a762efe0417c471bd.zip | |
x86: add Roqos Core RC10 ethernet interfaces
eth0 -> single NIC (i211at)
eth1 -> single NIC (i211at) -> 4-port unmanaged switch (BCM53125U)
Notes
UART is exposed on J4 connector, pinout starting from pin marked 1:
1. GND, 2. NC?, 3. NC?, 4. RX, 5. TX, 6. NC?
baud: 115200, parity: none, flow control: none
The board is setup by coreboot with UEFI. To enter setup screen hold
ESC key on boot.
The 5-LED multicolor matrix is attached on first I2C device named
"Synopsys DesignWare I2C adapter" at address 0x60. Controlling values
are stored in /opt/roqos/etc/rcLED.conf of original firmware.
Remember to backup the original firmware, there are no downloadable
copies.
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Diffstat (limited to 'target/linux/sunxi/image/cortexa7.mk')
0 files changed, 0 insertions, 0 deletions