diff options
| author | Thomas Aldrian <dev.aldrian@gmail.com> | 2021-04-27 20:14:34 +0100 |
|---|---|---|
| committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2021-05-28 01:12:21 +0200 |
| commit | f755d81999b1745bc156ac53f10e8043c9def3de (patch) | |
| tree | baf5d79bd1b14e37ae45cffa22abd8015a47210e /target/linux/ramips/mt76x8 | |
| parent | 53b9cc442f9ba33c66f78ee0a1fda4bb71ddd679 (diff) | |
| download | upstream-f755d81999b1745bc156ac53f10e8043c9def3de.tar.gz upstream-f755d81999b1745bc156ac53f10e8043c9def3de.tar.bz2 upstream-f755d81999b1745bc156ac53f10e8043c9def3de.zip | |
ramips: add support for Wavlink WL-WN578A2
This commit adds support for the Wavlink WL-WN578A2 dual-band wall-plug
wireless router. This device is also sold under the name SilverCrest
SWV 733 A2.
Device Specifications:
- CPU: MediaTek MT7628AN (580MHz)
- Flash: 8MB
- RAM: 64MB
- Bootloader: U-Boot
- Ethernet: 2x 10/100 Mbps
- 2.4 GHz: 802.11b/g/n SoC
- 5 GHz: 802.11a/n/ac MT7610E
- Antennas: internal
- 4 green LEDs: WPS/Power, LAN, WAN, wifi-low, wifi-med, wifi-high
- Buttons: Reset, WPS
- Sliding mode switch: AP, repeater, client
- Small sliding power switch
Flashing instructions:
U-Boot launches TFTP client if WPS button is pressed during power-on.
Configure as follows:
- Server IP: 192.168.10.100
- Filename (rename sysupgrade file to this): firmware.bin
Flashing should not take more than a minute, device will reboot
automatically.
Signed-off-by: Thomas Aldrian <dev.aldrian@gmail.com>
Diffstat (limited to 'target/linux/ramips/mt76x8')
| -rw-r--r-- | target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds | 3 | ||||
| -rw-r--r-- | target/linux/ramips/mt76x8/base-files/etc/board.d/02_network | 6 |
2 files changed, 6 insertions, 3 deletions
diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds index fdef158ea8..e2fb44c81e 100644 --- a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds @@ -129,7 +129,8 @@ wavlink,wl-wn575a3) ucidef_set_led_rssi "wifi-med" "wifi-med" "green:wifi-med" "wlan1" "50" "84" ucidef_set_led_rssi "wifi-high" "wifi-high" "green:wifi-high" "wlan1" "85" "100" ;; -wavlink,wl-wn577a2) +wavlink,wl-wn577a2|\ +wavlink,wl-wn578a2) ucidef_set_led_switch "lan" "lan" "green:lan" "switch0" "0x8" ucidef_set_led_switch "wan" "wan" "green:wan" "switch0" "0x10" ;; diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network index 5ce44d0e9b..d61a60591c 100644 --- a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network @@ -46,7 +46,8 @@ ramips_setup_interfaces() ;; buffalo,wcr-1166ds|\ elecom,wrc-1167fs|\ - wavlink,wl-wn577a2) + wavlink,wl-wn577a2|\ + wavlink,wl-wn578a2) ucidef_add_switch "switch0" \ "3:lan" "4:wan" "6@eth0" ;; @@ -168,7 +169,8 @@ ramips_setup_macs() ;; cudy,wr1000|\ hilink,hlk-7688a|\ - wavlink,wl-wn577a2) + wavlink,wl-wn577a2|\ + wavlink,wl-wn578a2) wan_mac=$(mtd_get_mac_binary factory 0x2e) label_mac=$(mtd_get_mac_binary factory 0x4) ;; |