diff options
author | DENG Qingfang <dengqf6@mail2.sysu.edu.cn> | 2019-12-14 00:24:19 +0800 |
---|---|---|
committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2019-12-13 19:43:47 +0100 |
commit | 1b7199c90c7128e3f81cc4abc6d80ab76a820b12 (patch) | |
tree | 74ec71602f5aee46c6f542ea9652037e9d8989f1 /target/linux/ramips/mt7621 | |
parent | 0bf4d681d4f2e4bd3c3a61e7fe5dca2a40b1902f (diff) | |
download | upstream-1b7199c90c7128e3f81cc4abc6d80ab76a820b12.tar.gz upstream-1b7199c90c7128e3f81cc4abc6d80ab76a820b12.tar.bz2 upstream-1b7199c90c7128e3f81cc4abc6d80ab76a820b12.zip |
ramips: add support for JCG JHR-AC876M
JCG JHR-AC876M is an AC2600M router
Hardware specs:
SoC: MT7621AT
2.4GHz: MT7615N 4x4 @ PCIe0
5GHz: MT7615N 4x4 @ PCIe1
Flash: Winbond W25Q128JVSQ 16MiB
RAM: Nanya NT5CB128M16 256MiB
USB 2.0 and 3.0 ports
6 LEDs, 3 of which are connected to SoC GPIO
Reset and WPS buttons
Flash instructions:
Stock to OpenWrt:
Upload factory.bin in stock firmware's upgrade page,
do not preserve settings
OpenWrt to stock:
Push and hold the reset button for 5s while power cycling to
enter recovery mode;
Visit 192.168.1.1 and upload stock firmware
MAC addresses map:
0x0004 *:1c wlan2g/wan/label
0x8004 *:20 wlan5g
0xe000 *:1b lan
0xe006 *:1a not used in stock fw
Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
Diffstat (limited to 'target/linux/ramips/mt7621')
-rwxr-xr-x | target/linux/ramips/mt7621/base-files/etc/board.d/02_network | 5 |
1 files changed, 5 insertions, 0 deletions
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network index bae7f41f1c..5c6b5659cb 100755 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network @@ -14,6 +14,7 @@ ramips_setup_interfaces() d-team,pbr-m1|\ firefly,firewrt|\ hiwifi,hc5962|\ + jcg,jhr-ac876m|\ mediatek,ap-mt7621a-v60|\ mediatek,mt7621-eval-board|\ mqmaker,witi|\ @@ -222,6 +223,10 @@ ramips_setup_macs() iptime,a6ns-m) wan_mac=$(mtd_get_mac_binary u-boot 0x1fc40) ;; + jcg,jhr-ac876m) + label_mac=$(mtd_get_mac_binary factory 0x4) + wan_mac=$label_mac + ;; mediatek,ap-mt7621a-v60) wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x5)" 1) ;; |