ramips: support dual image feature on ALFA Network boards

New U-Boot version for MediaTek MT76x8/MT762x based ALFA Network boards
includes support for a 'dual image' feature. Users can enable it using
U-Boot environment variable 'dual_image' ('1' -> enabled).

When 'dual image' feature is enabled, U-Boot will modify DTB and divide
the original 'firmware' flash area into two, equal in size and aligned
to 64 KB partitions: 'firmware' and 'backup'. U-Boot will also adjust
size of 'firmware' area to match installed flash chip size.

U-Boot will load kernel from active partition which is marked with env
variable 'bootactive' ('1' -> first partition, '2' -> second partition)
and rename both partitions accordingly ('firmware' <-> 'backup').

There are 3 additional env variables used to control 'dual image' mode:
- bootlimit   - maximum number of unsuccessful boot tries (default: '3')
- bootcount   - current number of boot tries
- bootchanged - flag which informs that active partition was changed; if
                it is set and 'bootcount' reaches 'bootlimit' value,
                U-Boot will start web-based recovery which then updates
                both partitions with provided image

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

1 files changed, 16 insertions, 0 deletions

diff --git a/target/linux/ramips/mt7620/base-files/lib/upgrade/platform.sh b/target/linux/ramips/mt7620/base-files/lib/upgrade/platform.sh
index 786d57fc70..aad243c1f9 100755
--- a/target/linux/ramips/mt7620/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/mt7620/base-files/lib/upgrade/platform.sh
@@ -5,6 +5,9 @@
 PART_NAME=firmware
 REQUIRE_IMAGE_METADATA=1
 
+RAMFS_COPY_BIN='fw_printenv fw_setenv'
+RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
+
 platform_check_image() {
 	return 0
 }
@@ -13,6 +16,19 @@ platform_do_upgrade() {
 	local board=$(board_name)
 
 	case "$board" in
+	alfa-network,ac1200rm|\
+	alfa-network,tube-e4g)
+		[ "$(fw_printenv -n dual_image 2>/dev/null)" = "1" ] &&\
+		[ -n "$(find_mtd_part backup)" ] && {
+			PART_NAME=backup
+			if [ "$(fw_printenv -n bootactive 2>/dev/null)" = "1" ]; then
+				fw_setenv bootactive 2 || exit 1
+			else
+				fw_setenv bootactive 1 || exit 1
+			fi
+		}
+		default_do_upgrade "$1"
+		;;
 	*)
 		default_do_upgrade "$1"
 		;;