diff options
| author | Tobias Welz <tw@wiznet.eu> | 2020-08-04 17:55:40 +0200 |
|---|---|---|
| committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-08-06 13:33:26 +0200 |
| commit | d0b229f553a814b22c16976e40a197f892c0c0df (patch) | |
| tree | 47b92ceb50924dd0a44324a6b298a17beac28427 /target/linux/ramips/dts | |
| parent | 6c29604438a0c2cbf95930244319c41d57756d7d (diff) | |
| download | upstream-d0b229f553a814b22c16976e40a197f892c0c0df.tar.gz upstream-d0b229f553a814b22c16976e40a197f892c0c0df.tar.bz2 upstream-d0b229f553a814b22c16976e40a197f892c0c0df.zip | |
ramips: correct WizFi630S pin mappings
WizFi630S had some pins changed in the release version of the board.
The run led, wps button and a slide switch where affected.
This patch is correcting this.
i2c is removed as it is sharing a pin with the run (system) led.
uart2 is enabled as it is also enabled in the OEM firmware.
Signed-off-by: Tobias Welz <tw@wiznet.eu>
Diffstat (limited to 'target/linux/ramips/dts')
| -rw-r--r-- | target/linux/ramips/dts/mt7628an_wiznet_wizfi630s.dts | 34 |
1 files changed, 8 insertions, 26 deletions
diff --git a/target/linux/ramips/dts/mt7628an_wiznet_wizfi630s.dts b/target/linux/ramips/dts/mt7628an_wiznet_wizfi630s.dts index 41634c6002..684a70cffe 100644 --- a/target/linux/ramips/dts/mt7628an_wiznet_wizfi630s.dts +++ b/target/linux/ramips/dts/mt7628an_wiznet_wizfi630s.dts @@ -28,7 +28,7 @@ led_run: run { label = "wizfi630s:green:run"; - gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + gpios = <&gpio 5 GPIO_ACTIVE_LOW>; }; ledwps { @@ -61,47 +61,29 @@ wps { label = "wps"; - gpios = <&gpio 32 GPIO_ACTIVE_HIGH>; + gpios = <&gpio 41 GPIO_ACTIVE_LOW>; linux,code = <KEY_WPS_BUTTON>; }; scm1 { label = "SCM1"; - gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; linux,code = <BTN_1>; + linux,input-type = <EV_SW>; }; scm2 { label = "SCM2"; gpios = <&gpio 2 GPIO_ACTIVE_LOW>; linux,code = <BTN_2>; + linux,input-type = <EV_SW>; }; }; }; &state_default { gpio { - groups = "gpio"; - function = "gpio"; - }; - - i2s { - groups = "i2s"; - function = "gpio"; - }; - - wdt { - groups = "wdt"; - function = "gpio"; - }; - - i2c { - groups = "i2c"; - function = "gpio"; - }; - - refclk { - groups = "refclk"; + groups = "gpio", "i2s", "i2c", "wdt", "refclk", "p1led_an", "p2led_an"; function = "gpio"; }; }; @@ -150,11 +132,11 @@ }; }; -&i2c { +&uart1 { status = "okay"; }; -&uart1 { +&uart2 { status = "okay"; }; |