aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/dts/mt7628an_minew_g1-c.dts
diff options
context:
space:
mode:
authorAlexander Couzens <lynxis@fe80.eu>2021-06-01 21:09:26 +0000
committerAlexander Couzens <lynxis@fe80.eu>2021-07-05 17:27:13 +0200
commit8d497b65704f62294a4bbc0e1f5aa4eb1dbf9e24 (patch)
treec446dca5ab183ee082a3bd9e52d027baf34c745c /target/linux/ramips/dts/mt7628an_minew_g1-c.dts
parentbb2a9af6f1f3a03617002d0b9ba361f97d68dc02 (diff)
downloadupstream-8d497b65704f62294a4bbc0e1f5aa4eb1dbf9e24.tar.gz
upstream-8d497b65704f62294a4bbc0e1f5aa4eb1dbf9e24.tar.bz2
upstream-8d497b65704f62294a4bbc0e1f5aa4eb1dbf9e24.zip
ramips: add support for minew g1-c
The minew g1-c is a smart home gateway / BLE gateway. A Nordic nRF52832 is available via USB UART (cp210x) to support BLE. The LED ring is a ring of 24x ws2812b connect to a generic GPIO (unsupported). There is a small LED which is only visible when the device is open which will be used as LED until the ws2812b is supported. The board has also a micro sdcard/tfcard slot (untested). The Nordic nRF52832 exposes SWD over a 5pin header (GND, VCC, SWD, SWC, RST). The vendor uses an older OpenWrt version, sysupgrade can be used via serial or ssh. CPU: MT7628AN / 580MHz RAM: DDR2 128 MiB RAM Flash: SPI NOR 16 MiB W25Q128 Ethernet: 1x 100 mbit (Port 0) (PoE in) USB: USB hub, 2x external, 1x internal to USB UART Power: via micro usb or PoE 802.11af UART: 3.3V, 115200 8n1 Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Diffstat (limited to 'target/linux/ramips/dts/mt7628an_minew_g1-c.dts')
-rw-r--r--target/linux/ramips/dts/mt7628an_minew_g1-c.dts146
1 files changed, 146 insertions, 0 deletions
diff --git a/target/linux/ramips/dts/mt7628an_minew_g1-c.dts b/target/linux/ramips/dts/mt7628an_minew_g1-c.dts
new file mode 100644
index 0000000000..74ea47aee0
--- /dev/null
+++ b/target/linux/ramips/dts/mt7628an_minew_g1-c.dts
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7628an.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Minew G1-C";
+ compatible = "minew,g1-c", "mediatek,mt7628an-soc";
+
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x8000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "red:system";
+ gpios = <&gpio 43 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ ws2812 {
+ gpio-export,name = "ws2812";
+ gpio-export,output = <1>;
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ nrf_power {
+ gpio-export,name = "nrf_power";
+ gpio-export,output = <1>;
+ gpios = <&gpio 45 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&state_default {
+ gpio {
+ groups = "gpio";
+ function = "gpio";
+ };
+
+ p0led_an {
+ groups = "p0led_an";
+ function = "gpio";
+ };
+
+ uart1 {
+ groups = "uart1";
+ function = "gpio";
+ };
+
+ wdt {
+ groups = "wdt";
+ function = "gpio";
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+ mediatek,portmap = <0x3e>;
+};
+
+&wmac {
+ status = "okay";
+};
+
+&sdhci {
+ status = "okay";
+ mediatek,cd-high;
+};