diff options
| author | Maxim Anisimov <maxim.anisimov.ua@gmail.com> | 2018-05-30 18:41:53 +0300 |
|---|---|---|
| committer | Mathias Kresin <dev@kresin.me> | 2018-06-16 10:08:51 +0200 |
| commit | 8956eb502df2d3e40a1c83a46d2781e732f08910 (patch) | |
| tree | 0417ca5cad861306a2bb03f12fcc17098f619274 /target/linux/ramips/base-files | |
| parent | 82fa7b9d78acf53708ee6480df328b11023e4a56 (diff) | |
| download | upstream-8956eb502df2d3e40a1c83a46d2781e732f08910.tar.gz upstream-8956eb502df2d3e40a1c83a46d2781e732f08910.tar.bz2 upstream-8956eb502df2d3e40a1c83a46d2781e732f08910.zip | |
ramips: add support for TP-Link TL-WR842N v5
TP-Link TL-WR842N v5 are simple N300 router with 5-port FE switch and
non-detachable antennas. Its very similar to TP-Link TL-MR3420 V5.
Specification:
- MT7628N/N (580 MHz)
- 64 MB of RAM (DDR2)
- 8 MB of FLASH
- 2T2R 2.4 GHz
- 5x 10/100 Mbps Ethernet
- 2x external, non-detachable antennas
- USB 2.0 Port
- UART (J1) header on PCB (115200 8n1)
- 7x LED, 2x button, power input switch
Flash instruction:
The only way to flash OpenWrt image in wr842nv5 is to use
tftp recovery mode in U-Boot:
1. Configure PC with static IP 192.168.0.225/24 and tftp server.
2. Rename "lede-ramips-mt7628-tplink_tl-wr842n-v5-squashfs-tftp-recovery.bin"
to "tp_recovery.bin" and place it in tftp server directory.
3. Connect PC with one of LAN ports, press the reset button, power up
the router and keep button pressed for around 6-7 seconds, until
device starts downloading the file.
4. Router will download file from server, write it to flash and reboot.
Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
Diffstat (limited to 'target/linux/ramips/base-files')
4 files changed, 5 insertions, 1 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 68273af901..a9a68f6eef 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -414,7 +414,8 @@ tplink,c50-v3) ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan2g" "phy0tpt" ucidef_set_led_wlan "wlan5g" "wlan5g" "$boardname:green:wlan5g" "phy1tpt" ;; -tplink,tl-mr3420-v5) +tplink,tl-mr3420-v5|\ +tplink,tl-wr842n-v5) set_usb_led "$boardname:green:usb" ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt" ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e" diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 7f732fed94..49d7f9220a 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -205,6 +205,7 @@ ramips_setup_interfaces() tplink,c20-v4|\ tplink,c50-v3|\ tplink,tl-mr3420-v5|\ + tplink,tl-wr842n-v5|\ tl-wr840n-v4|\ tl-wr840n-v5|\ tl-wr841n-v13|\ diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 965cc07880..e5373a80d1 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -42,6 +42,7 @@ get_status_led() { tplink,c20-v4|\ tplink,c50-v3|\ tplink,tl-mr3420-v5|\ + tplink,tl-wr842n-v5|\ tplink,tl-wr902ac-v3|\ tl-wr840n-v4|\ tl-wr840n-v5|\ diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 90159bcfaa..9b17ecbebb 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -255,6 +255,7 @@ platform_check_image() { tplink,c20-v4|\ tplink,c50-v3|\ tplink,tl-mr3420-v5|\ + tplink,tl-wr842n-v5|\ tplink,tl-wr902ac-v3|\ tl-wr840n-v4|\ tl-wr840n-v5|\ |