ramips: split base-files into subtargets

While most of the target's contents are split into subtargets, the
base-files are maintained for the target as a whole.

However, OpenWrt already implements a mechanism that will use (and
even prefer) files in the subtargets' directories. This can be
exploited to make several scripts subtarget-specific and thus save
some space.

In certain cases, keeping files in parent (=target) base-files was
more convenient, and thus no splitting was performed for those.

Note that this will increase overall code lines, but reduce code
per subtarget.

base-files ipk size reduction:
master (mt7621)   60958 B
split (mt7620)    46358 B (- 14.3 kiB)
split (mt7621)    48759 B (- 11.9 kiB)
split (mt76x8)    44948 B (- 15.6 kiB)
split (rt288x)    43508 B (- 17.0 kiB)
split (rt305x)    45616 B (- 15.0 kiB)
split (rt3883)    44176 B (- 16.4 kiB)

Run-tested on:
GL.iNet GL-MT300N-V2 (mt76x8)
D-Link DWR-116 (mt7620)

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

8 files changed, 0 insertions, 1594 deletions

diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
deleted file mode 100755
index 662bf6b6cd..0000000000
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ /dev/null
@@ -1,481 +0,0 @@
-#!/bin/sh
-
-. /lib/functions/leds.sh
-. /lib/functions/uci-defaults.sh
-
-set_wifi_led() {
-	ucidef_set_led_netdev "wifi_led" "wifi" "${1}" "${2:-wlan0}"
-}
-
-
-board=$(board_name)
-boardname="${board##*,}"
-
-board_config_update
-
-led_wlan="$(get_dt_led wlan)"
-[ -n "$led_wlan" ] && ucidef_set_led_wlan "wifi_led" "wifi" "$led_wlan" "phy0tpt"
-
-case $board in
-7links,px-4885-4m|\
-7links,px-4885-8m)
-	set_wifi_led "px-4885:orange:wifi"
-	;;
-aigale,ai-br100)
-	ucidef_set_led_netdev "wan" "wan" "$boardname:blue:wan" "eth0.2"
-	set_wifi_led "$boardname:blue:wlan"
-	;;
-airlink101,ar670w|\
-airlink101,ar725w|\
-asiarf,awapn2403)
-	set_wifi_led "rt2800soc-phy0::radio"
-	;;
-airlive,air3gii|\
-aximcom,mr-102n|\
-edimax,3g-6200nl|\
-hilink,hlk-7628n|\
-netgear,wnce2001|\
-skylab,skw92a|\
-zbtlink,zbt-we2026)
-	set_wifi_led "$boardname:green:wlan"
-	;;
-alfa-network,ac1200rm)
-	set_wifi_led "$boardname:green:wlan2g" "wlan1"
-	;;
-alfa-network,awusfree1|\
-edimax,br-6478ac-v2|\
-edimax,ew-7478apc)
-	set_wifi_led "$boardname:blue:wlan"
-	;;
-alfa-network,tube-e4g)
-	ucidef_set_led_netdev "4g" "4g" "$boardname:green:4g" "wwan0"
-	ucidef_set_led_netdev "lan" "lan" "$boardname:blue:lan" "eth0"
-	;;
-allnet,all0256n-4m|\
-allnet,all0256n-8m)
-	ucidef_set_rssimon "wlan0" "200000" "1"
-	ucidef_set_led_rssi "rssilow" "RSSILOW" "all0256n:green:rssilow" "wlan0" "1" "40" "0" "6"
-	ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "all0256n:green:rssimed" "wlan0" "30" "80" "-29" "5"
-	ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "all0256n:green:rssihigh" "wlan0" "70" "100" "-69" "8"
-	set_wifi_led "rt2800pci-phy0::radio"
-	;;
-alphanetworks,asl26555-8m|\
-alphanetworks,asl26555-16m)
-	ucidef_set_led_netdev "eth" "ETH" "asl26555:green:eth" "eth0"
-	set_wifi_led "asl26555:green:wlan"
-	;;
-asus,rp-n53)
-	ucidef_set_led_netdev "eth" "Network" "$boardname:white:back" "eth0"
-	set_wifi_led "$boardname:blue:wifi"
-	;;
-asus,rt-n12p)
-	ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" eth0.1
-	ucidef_set_led_netdev "wan" "wan" "$boardname:green:wan" eth0.2
-	set_wifi_led "$boardname:green:air"
-	;;
-asus,rt-n14u)
-	ucidef_set_led_netdev "lan" "lan" "$boardname:blue:lan" eth0.1
-	ucidef_set_led_netdev "wan" "wan" "$boardname:blue:wan" eth0.2
-	set_wifi_led "$boardname:blue:air"
-	;;
-bdcom,wap2100-sk)
-	set_wifi_led "$boardname:green:wlan2g"
-	;;
-belkin,f9k1109v1)
-	set_usb_led "$boardname:green:usb1"
-	ucidef_set_led_netdev "lan" "lan" "$boardname:blue:wps" "eth0"
-	;;
-alfa-network,w502u|\
-dlink,dir-300-b1|\
-dlink,dir-300-b7|\
-dlink,dir-320-b1|\
-dlink,dir-600-b1|\
-dlink,dir-610-a1|\
-dlink,dir-615-d|\
-dlink,dir-615-h1|\
-dlink,dir-620-a1|\
-engenius,esr-9753|\
-hilink,hlk-rm04|\
-nexx,wt1520-4m|\
-nexx,wt1520-8m|\
-ralink,v11st-fe|\
-skyline,sl-r7205|\
-tenda,w306r-v2|\
-zyxel,keenetic-start|\
-zyxel,keenetic|\
-zyxel,nbg-419n-v2)
-	set_wifi_led "rt2800pci-phy0::radio"
-	;;
-asus,rt-ac51u|\
-kingston,mlw221|\
-kingston,mlwg2|\
-rakwireless,rak633|\
-sanlinking,d240)
-	set_wifi_led "$boardname:blue:wifi"
-	;;
-belkin,f5d8235-v1)
-	set_wifi_led "$boardname:blue:wireless"
-	;;
-comfast,cf-wr800n)
-	ucidef_set_led_netdev "lan" "lan" "$boardname:white:ethernet" eth0.1
-	set_wifi_led "$boardname:white:wifi"
-	;;
-cudy,wr1000)
-	ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x10"
-	ucidef_set_led_switch "lan1" "lan1" "$boardname:blue:lan1" "switch0" "0x08"
-	ucidef_set_led_switch "lan2" "lan2" "$boardname:blue:lan2" "switch0" "0x04"
-	;;
-d-team,newifi-d2)
-	ucidef_set_led_switch "internet" "internet" "$boardname:amber:internet" "switch0" "0x10"
-	ucidef_set_led_netdev "wlan2g" "WiFi 2.4GHz" "$boardname:blue:wlan2g" "wlan0"
-	ucidef_set_led_netdev "wlan5g" "WiFi 5GHz" "$boardname:blue:wlan5g" "wlan1"
-	;;
-d-team,pbr-m1|\
-gehua,ghl-r-001)
-	ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "eth0.2"
-	;;
-dlink,dcs-930l-b1)
-	ucidef_set_led_netdev "wifi" "WiFi" "$boardname:blue:wps"
-	;;
-dlink,dir-620-d1|\
-dlink,dwr-116-a1|\
-head-weblink,hdrm200|\
-ohyeah,oy-0001|\
-planex,mzk-ex300np|\
-trendnet,tew-714tru|\
-zbtlink,zbt-wr8305rt|\
-zyxel,keenetic-omni|\
-zyxel,keenetic-omni-ii|\
-zyxel,keenetic-viva)
-	set_wifi_led "$boardname:green:wifi"
-	;;
-dlink,dir-860l-b1)
-	ucidef_set_led_netdev "wan" "wan" "$boardname:green:net" "eth0.2"
-	;;
-dlink,dwr-118-a1)
-	ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1f"
-	ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x20"
-	set_wifi_led "$boardname:green:wlan2g" "wlan1"
-	;;
-dlink,dwr-118-a2)
-	ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
-	ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
-	set_wifi_led "$boardname:green:wlan2g" "wlan1"
-	;;
-dlink,dwr-921-c1|\
-dlink,dwr-922-e2)
-	set_wifi_led "$boardname:green:wifi"
-	ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x0f"
-	ucidef_set_led_netdev "signalstrength" "signalstrength" "$boardname:green:sigstrength" "wwan0" "link"
-	ucidef_set_led_netdev "4g" "4g" "$boardname:green:4g" "wwan0" "tx rx"
-	;;
-dovado,tiny-ac|\
-fon,fonera-20n)
-	set_wifi_led "$boardname:orange:wifi"
-	;;
-edimax,3g-6200n|\
-edimax,br-6475nd|\
-planex,mzk-w300nh2)
-	set_wifi_led "$boardname:amber:wlan"
-	;;
-edimax,ew-7476rpc|\
-edimax,ew-7478ac)
-	ucidef_set_led_switch "lan" "lan" "$boardname:green:lan"  "switch0" "0x20"
-	;;
-elecom,wrh-300cr)
-	set_wifi_led "$boardname:green:wlan"
-	ucidef_set_led_netdev "lan" "lan" "$boardname:green:ethernet" "eth0"
-	;;
-engenius,esr600)
-	ucidef_set_led_netdev "wlan5g" "5.0GHz" "$boardname:blue:wlan5g" "wlan0"
-	ucidef_set_led_netdev "wlan2g" "2.4GHz" "$boardname:blue:wlan2g" "wlan1"
-	;;
-glinet,gl-mt300a|\
-glinet,gl-mt300n|\
-glinet,gl-mt750)
-	set_wifi_led "$boardname:wlan"
-	;;
-glinet,gl-mt300n-v2)
-	set_wifi_led "$boardname:red:wlan"
-	ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x1"
-	;;
-gnubee,gb-pc1|\
-gnubee,gb-pc2)
-	ucidef_set_led_switch "lan1" "lan1" "$boardname:green:lan1" "switch0" "0x01"
-	ucidef_set_led_switch "lan2" "lan2" "$boardname:green:lan2" "switch0" "0x10"
-	;;
-hauppauge,broadway)
-	set_wifi_led "$boardname:red:wps_active"
-	;;
-hiwifi,hc5661)
-	ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x01"
-	set_wifi_led "$boardname:blue:wlan2g"
-	;;
-hiwifi,hc5661a|\
-hiwifi,hc5761a|\
-xzwifi,creativebox-v1)
-	ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x10"
-	;;
-hiwifi,hc5761)
-	ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x01"
-	ucidef_set_led_netdev "wifi5g" "wifi5g" "$boardname:blue:wlan5g" "wlan0"
-	ucidef_set_led_netdev "wifi2g" "wifi2g" "$boardname:blue:wlan2g" "wlan1"
-	;;
-hiwifi,hc5861)
-	ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x20"
-	ucidef_set_led_netdev "wifi5g" "wifi5g" "$boardname:blue:wlan5g" "wlan0"
-	ucidef_set_led_netdev "wifi2g" "wifi2g" "$boardname:blue:wlan2g" "wlan1"
-	;;
-hnet,c108)
-	ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" "eth0"
-	ucidef_set_led_netdev "modem" "modem" "$boardname:green:modem" "wwan0"
-	;;
-hootoo,ht-tm02)
-	ucidef_set_led_netdev "eth" "Ethernet" "$boardname:green:lan" "eth0"
-	set_wifi_led "$boardname:blue:wlan"
-	;;
-huawei,hg255d)
-	set_wifi_led "$boardname:green:wlan"
-	ucidef_set_led_netdev "internet" "internet" "$boardname:green:internet" "eth0.2"
-	;;
-intenso,memory2move)
-	set_wifi_led "$boardname:blue:wifi"
-	ucidef_set_led_netdev "eth" "Ethernet" "$boardname:green:wan" "eth0"
-	;;
-iodata,wn-ac1167gr|\
-iodata,wn-ac733gr3)
-	ucidef_set_led_wlan "wlan5g" "WLAN5G" "$boardname:green:wlan5g" "phy0radio"
-	ucidef_set_led_wlan "wlan2g" "WLAN2G" "$boardname:green:wlan2g" "phy1radio"
-	;;
-kimax,u25awf-h1)
-	set_wifi_led "u25awf:red:wifi"
-	ucidef_set_led_netdev "eth" "eth" "u25awf:green:lan" "eth0"
-	;;
-kimax,u35wf)
-	set_wifi_led "$boardname:blue:wifi"
-	ucidef_set_led_netdev "eth" "ETH" "$boardname:green:eth" "eth0"
-	;;
-lava,lr-25g001)
-	ucidef_set_led_netdev "wlan2g" "WiFi 2.4GHz" "$boardname:green:wlan2g" "wlan1"
-	ucidef_set_led_netdev "wlan5g" "WiFi 5GHz" "$boardname:green:wlan5g" "wlan0"
-	;;
-lenovo,newifi-y1)
-	ucidef_set_led_netdev "wifi" "WIFI" "$boardname:blue:wifi" "wlan1"
-	ucidef_set_led_netdev "wifi5g" "WIFI5G" "$boardname:blue:wifi5g" "wlan0"
-	ucidef_set_led_switch "lan" "LAN" "$boardname:blue:lan" "switch0" "0x03"
-	;;
-lenovo,newifi-y1s)
-	ucidef_set_led_netdev "wifi" "WIFI" "$boardname:yellow:wifi" "wlan1"
-	ucidef_set_led_netdev "wifi5g" "WIFI5G" "$boardname:blue:wifi" "wlan0"
-	ucidef_set_led_netdev "wan" "WAN" "$boardname:blue:internet" "eth0.2" "tx rx"
-	;;
-mediatek,linkit-smart-7688)
-	ucidef_set_led_wlan "wifi" "wifi" "linkit-smart-7688:orange:wifi" "phy0tpt"
-	;;
-mikrotik,rbm11g)
-	ucidef_set_rssimon "wlan0" "200000" "1"
-	ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:green:rssi0" "wlan0" "1" "100"
-	ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$boardname:green:rssi1" "wlan0" "20" "100"
-	ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$boardname:green:rssi2" "wlan0" "40" "100"
-	ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:green:rssi3" "wlan0" "60" "100"
-	ucidef_set_led_rssi "rssiveryhigh" "RSSIVERYHIGH" "$boardname:green:rssi4" "wlan0" "80" "100"
-	;;
-mtc,wr1201)
-	ucidef_set_led_switch "eth_link" "LAN link" "$boardname:green:eth_link" "switch0" "0x0f"
-	;;
-netgear,ex2700|\
-netgear,wn3000rp-v3)
-	set_wifi_led "$boardname:green:router"
-	;;
-netgear,ex3700)
-	ucidef_set_led_netdev "wlan5g" "ROUTER (green)" "$boardname:green:router" "wlan0"
-	ucidef_set_led_netdev "wlan2g" "DEVICE (green)" "$boardname:green:device" "wlan1"
-	;;
-netgear,r6120)
-	ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x0f"
-	ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x10"
-	ucidef_set_led_wlan "wlan2g" "WiFi 2.4GHz" "$boardname:green:wlan2g" "phy0tpt"
-	;;
-netgear,r6220|\
-netgear,r6260|\
-netgear,r6350|\
-netgear,r6850|\
-netgear,wndr3700-v5)
-	ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x10"
-	;;
-omnima,hpm)
-	ucidef_set_led_netdev "eth" "ETH" "$boardname:green:eth" "eth0"
-	set_wifi_led "$boardname:green:wifi"
-	;;
-omnima,miniembplug)
-	set_wifi_led "$boardname:red:wlan"
-	;;
-phicomm,psg1208)
-	set_wifi_led "$boardname:white:wlan2g"
-	;;
-planex,mzk-ex750np|\
-zbtlink,zbt-we826-e)
-	set_wifi_led "$boardname:red:wifi"
-	;;
-tama,w06)
-	ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth0"
-	ucidef_set_led_wlan "wlan" "WLAN" "$boardname:green:wlan" "phy0tpt"
-	;;
-tplink,archer-c2-v1)
-	ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch1" "0x1e"
-	ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch1" "0x01"
-	set_wifi_led "$boardname:green:wlan"
-	;;
-tplink,archer-c20-v1)
-	ucidef_set_led_switch "lan" "lan" "$boardname:blue:lan" "switch0" "0x1e"
-	ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x01"
-	ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:blue:wlan2g" "wlan0"
-	;;
-tplink,archer-c20-v4)
-	ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
-	ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
-	ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:green:wlan2g" "wlan0"
-	;;
-tplink,archer-c20i)
-	ucidef_set_led_switch "lan" "lan" "$boardname:blue:lan" "switch0" "0x1e"
-	ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x01"
-	ucidef_set_led_wlan "wlan" "wlan" "$boardname:blue:wlan" "phy0radio"
-	;;
-tplink,archer-c50-v1)
-	ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
-	ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
-	ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:green:wlan2g" wlan1
-	set_wifi_led "$boardname:green:wlan5g"
-	;;
-tplink,archer-c50-v3|\
-tplink,archer-c50-v4)
-	ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
-	ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
-	ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan2g" "phy0tpt"
-	ucidef_set_led_wlan "wlan5g" "wlan5g" "$boardname:green:wlan5g" "phy1tpt"
-	;;
-tplink,archer-mr200)
-	ucidef_set_led_netdev "lan" "lan" "$boardname:white:lan" "eth0.1"
-	ucidef_set_led_netdev "wan" "wan" "$boardname:white:wan" "usb0"
-	set_wifi_led "$boardname:white:wlan"
-	;;
-tplink,re350-v1|\
-tplink,re650-v1)
-	ucidef_set_led_netdev "wifi2g" "Wifi 2.4G" "$boardname:blue:wifi2G" "wlan0"
-	ucidef_set_led_netdev "wifi5g" "Wifi 5G" "$boardname:blue:wifi5G" "wlan1"
-	ucidef_set_led_netdev "eth_act" "LAN act" "$boardname:green:eth_act" "eth0" "tx rx"
-	ucidef_set_led_switch "eth_link" "LAN link" "$boardname:green:eth_link" "switch0" "0x01"
-	;;
-tplink,tl-mr3020-v3)
-	set_wifi_led "$boardname:green:wlan"
-	ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth0"
-	;;
-tplink,tl-mr3420-v5|\
-tplink,tl-wr842n-v5)
-	ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt"
-	ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
-	ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
-	;;
-tplink,tl-wa801nd-v5)
-	ucidef_set_led_wlan "wlan" "wlan" "$boardname:green:wlan" "phy0tpt"
-	ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" "eth0"
-	;;
-tplink,tl-wr840n-v4)
-	ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt"
-	ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
-	ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
-	;;
-tplink,tl-wr841n-v13)
-	ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt"
-	ucidef_set_led_switch "lan1" "lan1" "$boardname:green:lan1" "switch0" "0x2"
-	ucidef_set_led_switch "lan2" "lan2" "$boardname:green:lan2" "switch0" "0x4"
-	ucidef_set_led_switch "lan3" "lan3" "$boardname:green:lan3" "switch0" "0x8"
-	ucidef_set_led_switch "lan4" "lan4" "$boardname:green:lan4" "switch0" "0x10"
-	ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
-	;;
-tplink,tl-wr841n-v14)
-	ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
-	ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
-	;;
-tplink,tl-wr902ac-v3)
-	ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt"
-	ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x10"
-	;;
-unielec,u7628-01-16m)
-	ucidef_set_led_switch "lan1" "lan1" "u7628-01:green:lan1" "switch0" "0x2"
-	ucidef_set_led_switch "lan2" "lan2" "u7628-01:green:lan2" "switch0" "0x4"
-	ucidef_set_led_switch "lan3" "lan3" "u7628-01:green:lan3" "switch0" "0x8"
-	ucidef_set_led_switch "lan4" "lan4" "u7628-01:green:lan4" "switch0" "0x10"
-	ucidef_set_led_switch "wan" "wan" "u7628-01:green:wan" "switch0" "0x01"
-	set_wifi_led "u7628-01:green:wlan"
-	;;
-vocore,vocore-8m|\
-vocore,vocore-16m)
-	ucidef_set_led_netdev "eth" "ETH" "vocore:orange:eth" "eth0"
-	;;
-wavlink,wl-wn570ha1)
-	ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
-	ucidef_set_rssimon "wlan0" "200000" "1"
-	ucidef_set_led_rssi "wifi-low" "wifi-low" "$boardname:green:wifi-low" "wlan0" "1" "49"
-	ucidef_set_led_rssi "wifi-med" "wifi-med" "$boardname:green:wifi-med" "wlan0" "50" "84"
-	ucidef_set_led_rssi "wifi-high" "wifi-high" "$boardname:green:wifi-high" "wlan0" "85" "100"
-	set_wifi_led "$boardname:green:wifi"
-	;;
-wavlink,wl-wn575a3)
-	ucidef_set_rssimon "wlan1" "200000" "1"
-	ucidef_set_led_rssi "wifi-low" "wifi-low" "$boardname:green:wifi-low" "wlan1" "1" "49"
-	ucidef_set_led_rssi "wifi-med" "wifi-med" "$boardname:green:wifi-med" "wlan1" "50" "84"
-	ucidef_set_led_rssi "wifi-high" "wifi-high" "$boardname:green:wifi-high" "wlan1" "85" "100"
-	;;
-xiaomi,mir3g)
-	ucidef_set_led_switch "wan-amber"  "WAN (amber)"  "$boardname:amber:wan"  "switch0" "0x02" "0x08"
-	ucidef_set_led_switch "lan1-amber" "LAN1 (amber)" "$boardname:amber:lan1" "switch0" "0x08" "0x08"
-	ucidef_set_led_switch "lan2-amber" "LAN2 (amber)" "$boardname:amber:lan2" "switch0" "0x04" "0x08"
-	;;
-xiaomi,mir3p)
-	ucidef_set_led_switch "wan-amber"  "WAN (amber)"  "$boardname:amber:wan"  "switch0" "0x10" "0x08"
-	ucidef_set_led_switch "lan1-amber" "LAN1 (amber)" "$boardname:amber:lan1" "switch0" "0x02" "0x08"
-	ucidef_set_led_switch "lan2-amber" "LAN2 (amber)" "$boardname:amber:lan2" "switch0" "0x04" "0x08"
-	ucidef_set_led_switch "lan3-amber" "LAN3 (amber)" "$boardname:amber:lan3" "switch0" "0x08" "0x08"
-	;;
-youhua,wr1200js)
-	ucidef_set_led_switch "internet" "INTERNET" "$boardname:green:wan" "switch0" "0x01"
-	;;
-youku,yk1)
-	set_wifi_led "$boardname:blue:air"
-	ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x10"
-	;;
-zbtlink,zbt-ape522ii)
-	ucidef_set_led_netdev "wlan2g4" "wlan1-link" "$boardname:green:wlan2g4" "wlan1"
-	ucidef_set_led_netdev "sys1" "wlan1" "$boardname:green:sys1" "wlan1" "tx rx"
-	ucidef_set_led_netdev "sys2" "wlan0" "$boardname:green:sys2" "wlan0" "tx rx"
-	;;
-zbtlink,zbt-wa05)
-	set_wifi_led "$boardname:blue:air"
-	;;
-zbtlink,zbt-we826-16m|\
-zbtlink,zbt-we826-32m)
-	set_wifi_led "zbt-we826:green:wifi"
-	;;
-zbtlink,zbt-we1026-5g-16m)
-	ucidef_set_led_netdev "lan" "LAN" "we1026-5g:green:lan" "eth0"
-	set_wifi_led "we1026-5g:green:wifi"
-	;;
-zbtlink,zbt-we1226)
-	set_wifi_led "$boardname:green:wlan"
-	ucidef_set_led_switch "lan1" "LAN1" "$boardname:green:lan1" "switch0" "0x01"
-	ucidef_set_led_switch "lan2" "LAN2" "$boardname:green:lan2" "switch0" "0x02"
-	ucidef_set_led_switch "wan" "WAN" "$boardname:green:wan" "switch0" "0x10"
-	;;
-zorlik,zl5900v2)
-	ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" eth0
-	;;
-zyxel,keenetic-extra-ii)
-	set_wifi_led "$boardname:green:wifi"
-	ucidef_set_led_switch "internet" "internet" "$boardname:green:internet" "switch0" "0x01"
-	;;
-esac
-
-board_config_flush
-
-exit 0
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
deleted file mode 100755
index 480726a870..0000000000
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ /dev/null
@@ -1,752 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-. /lib/functions/uci-defaults.sh
-. /lib/functions/system.sh
-
-ramips_setup_rt3x5x_vlans()
-{
-	if [ ! -x /sbin/swconfig ]; then
-		# legacy default
-		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
-		return
-	fi
-	local wanports=""
-	local lanports=""
-	for port in 5 4 3 2 1 0; do
-		if [ "$(swconfig dev rt305x port $port get disable)" = "1" ]; then
-			continue
-		fi
-		if [ "$(swconfig dev rt305x port $port get lan)" = "0" ]; then
-			wanports="$port:wan $wanports"
-		else
-			lanports="$port:lan $lanports"
-		fi
-	done
-	ucidef_add_switch "rt305x" $lanports $wanports "6t@eth0"
-}
-
-ramips_setup_interfaces()
-{
-	local board="$1"
-
-	case $board in
-	accton,wr6202|\
-	alfa-network,w502u|\
-	netcore,nw718|\
-	petatel,psr-680w|\
-	skyline,sl-r7205|\
-	upvel,ur-336un)
-		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
-		;;
-	adslr,g7|\
-	afoundry,ew1200|\
-	aigale,ai-br100|\
-	alfa-network,ac1200rm|\
-	asus,rt-n12p|\
-	buffalo,whr-g300n|\
-	d-team,pbr-m1|\
-	dlink,dir-300-b7|\
-	dlink,dir-320-b1|\
-	dlink,dir-610-a1|\
-	dlink,dir-810l|\
-	dlink,dwr-116-a1|\
-	dlink,dwr-921-c1|\
-	dlink,dwr-922-e2|\
-	edimax,3g-6200n|\
-	firefly,firewrt|\
-	hilink,hlk-rm04|\
-	hiwifi,hc5661a|\
-	hiwifi,hc5761a|\
-	hiwifi,hc5962|\
-	mediatek,ap-mt7621a-v60|\
-	mediatek,mt7621-eval-board|\
-	mediatek,mt7628an-eval-board|\
-	mercury,mac1200r-v2|\
-	mqmaker,witi|\
-	mtc,wr1201|\
-	netis,wf-2881|\
-	nixcore,x1-16m|\
-	nixcore,x1-8m|\
-	ohyeah,oy-0001|\
-	phicomm,k2p|\
-	phicomm,psg1208|\
-	phicomm,psg1218a|\
-	planex,db-wrt01|\
-	planex,mzk-750dhp|\
-	planex,mzk-w300nh2|\
-	planex,vr500|\
-	samknows,whitebox-v8|\
-	sanlinking,d240|\
-	storylink,sap-g3200u3|\
-	telco-electronics,x1|\
-	totolink,a7000r|\
-	totolink,lr1200|\
-	unielec,u7621-06-16m|\
-	unielec,u7621-06-64m|\
-	wavlink,wl-wn570ha1|\
-	wavlink,wl-wn575a3|\
-	xiaomi,miwifi-mini|\
-	xiaomi,miwifi-nano|\
-	xiaoyu,xy-c5|\
-	xzwifi,creativebox-v1|\
-	youku,yk-l2|\
-	youku,yk1|\
-	zbtlink,zbt-ape522ii|\
-	zbtlink,zbt-we1326|\
-	zbtlink,zbt-we3526|\
-	zbtlink,zbt-we826-16m|\
-	zbtlink,zbt-we826-32m|\
-	zbtlink,zbt-we826-e|\
-	zbtlink,zbt-wg2626|\
-	zbtlink,zbt-wg3526-16m|\
-	zbtlink,zbt-wg3526-32m|\
-	zbtlink,zbt-wr8305rt|\
-	zyxel,keenetic|\
-	zyxel,keenetic-omni)
-		ucidef_add_switch "switch0" \
-			"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
-		;;
-	airlink101,ar670w|\
-	airlink101,ar725w|\
-	asus,rt-ac51u|\
-	rakwireless,rak633)
-		ucidef_add_switch "switch0" \
-			"0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0"
-		;;
-	alfa-network,awusfree1|\
-	alfa-network,tube-e4g|\
-	buffalo,wli-tx4-ag300n|\
-	buffalo,wmr-300|\
-	dlink,dap-1522-a1|\
-	dlink,dch-m225|\
-	d-team,pbr-d1|\
-	elecom,wrh-300cr|\
-	huawei,d105|\
-	kimax,u25awf-h1|\
-	loewe,wmdr-143n|\
-	netgear,ex2700|\
-	netgear,ex3700|\
-	netgear,wn3000rp-v3|\
-	omnima,hpm|\
-	planex,cs-qr10|\
-	planex,mzk-ex300np|\
-	planex,mzk-ex750np|\
-	ravpower,wd03|\
-	sercomm,na930|\
-	tama,w06|\
-	tplink,tl-mr3020-v3|\
-	tplink,tl-wr802n-v4)
-		ucidef_set_interface_lan "eth0"
-		;;
-	allnet,all0256n-4m|\
-	allnet,all0256n-8m|\
-	allnet,all5002|\
-	allnet,all5003|\
-	dlink,dcs-930l-b1|\
-	dlink,dcs-930|\
-	edimax,ew-7476rpc|\
-	edimax,ew-7478ac|\
-	hame,mpr-a2|\
-	hauppauge,broadway|\
-	hootoo,ht-tm02|\
-	intenso,memory2move|\
-	kimax,u35wf|\
-	mediatek,linkit-smart-7688|\
-	microduino,microwrt|\
-	mikrotik,rbm11g|\
-	netgear,wnce2001|\
-	onion,omega2p|\
-	onion,omega2|\
-	tenda,3g150b|\
-	tenda,3g300m|\
-	tenda,w150m|\
-	thunder,timecloud|\
-	tplink,tl-wa801nd-v5|\
-	unbranded,a5-v11|\
-	wansview,ncs601w|\
-	widora,neo-16m|\
-	widora,neo-32m|\
-	yukai,bocco|\
-	zbtlink,zbt-cpe102|\
-	zorlik,zl5900v2|\
-	zte,q7)
-		ucidef_add_switch "switch0"
-		ucidef_add_switch_attr "switch0" "enable" "false"
-		ucidef_set_interface_lan "eth0"
-		;;
-	alphanetworks,asl26555-8m|\
-	alphanetworks,asl26555-16m|\
-	asus,rp-n53)
-		ucidef_add_switch "switch0" \
-			"1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0"
-		;;
-	argus,atp-52b|\
-	asiarf,awm002-evb-4m|\
-	asiarf,awm002-evb-8m|\
-	asus,rt-ac57u|\
-	asus,rt-n14u|\
-	bdcom,wap2100-sk|\
-	dlink,dir-645|\
-	glinet,gl-mt300a|\
-	glinet,gl-mt300n|\
-	glinet,gl-mt750|\
-	hilink,hlk-7628n|\
-	hiwifi,hc5661|\
-	hiwifi,hc5861b|\
-	jcg,jhr-n805r|\
-	jcg,jhr-n825r|\
-	jcg,jhr-n926r|\
-	mikrotik,rb750gr3|\
-	mikrotik,rbm33g|\
-	planex,mzk-wdpr|\
-	skylab,skw92a|\
-	tplink,archer-c20-v4|\
-	tplink,archer-c20i|\
-	tplink,archer-c50-v3|\
-	tplink,archer-c50-v4|\
-	tplink,tl-mr3420-v5|\
-	tplink,tl-wr840n-v4|\
-	tplink,tl-wr840n-v5|\
-	tplink,tl-wr841n-v13|\
-	tplink,tl-wr841n-v14|\
-	tplink,tl-wr842n-v5|\
-	unielec,u7628-01-16m|\
-	ubiquiti,edgerouterx|\
-	ubiquiti,edgerouterx-sfp|\
-	upvel,ur-326n4g|\
-	wrtnode,wrtnode|\
-	wrtnode,wrtnode2p|\
-	wrtnode,wrtnode2r|\
-	youhua,wr1200js|\
-	zbtlink,zbt-wa05|\
-	zyxel,keenetic-extra-ii)
-		ucidef_add_switch "switch0" \
-			"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0"
-		;;
-	asiarf,ap7621-001)
-		ucidef_add_switch "switch0" "0:lan" "4:wan" "6@eth0"
-		;;
-	asiarf,ap7621-nv1)
-		ucidef_add_switch "switch0" "0:wan" "2:lan" "3:lan" "6@eth0"
-		;;
-	asiarf,awapn2403)
-		ucidef_add_switch "switch0" \
-			"0:lan" "1:wan" "6@eth0"
-		;;
-	asus,rt-ac65p|\
-	asus,rt-ac85p|\
-	dlink,dir-860l-b1|\
-	elecom,wrc-1167ghbk2-s|\
-	elecom,wrc-1900gst|\
-	elecom,wrc-2533gst|\
-	huawei,hg255d|\
-	iodata,wn-ax1167gr|\
-	iodata,wn-gx300gr|\
-	iodata,wnpr2600g|\
-	iptime,a604m)
-		ucidef_add_switch "switch0" \
-			"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0"
-		;;
-	asus,rt-n15|\
-	belkin,f9k1109v1|\
-	sitecom,wl-351)
-		ucidef_add_switch "switch0" \
-			"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0"
-		;;
-	asus,rt-n56u)
-		ucidef_add_switch "switch0" \
-			"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "8@eth0"
-		;;
-	asus,wl-330n|\
-	easyacc,wizard-8800|\
-	kingston,mlwg2)
-		ucidef_set_interface_lan "eth0.1"
-		;;
-	aximcom,mr-102n|\
-	kingston,mlw221)
-		ucidef_set_interface_lan "eth0.2"
-		;;
-	belkin,f5d8235-v1|\
-	belkin,f5d8235-v2|\
-	buffalo,wzr-agl300nh|\
-	ralink,v11st-fe|\
-	trendnet,tew-714tru)
-		ucidef_add_switch "switch0" \
-			"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
-		;;
-	buffalo,wcr-1166ds)
-		ucidef_add_switch "switch0" \
-			"3:lan" "4:wan" "6@eth0"
-		;;
-	buffalo,whr-300hp2|\
-	buffalo,whr-600d|\
-	buffalo,wsr-1166dhp|\
-	buffalo,wsr-600dhp)
-		ucidef_add_switch "switch0" \
-			"0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "4:wan:5" "6@eth0"
-		;;
-	buffalo,whr-1166d)
-		ucidef_add_switch "switch0" \
-			"0:lan" "1:lan" "2:lan" "3:lan" "5:wan" "6@eth0"
-		;;
-	comfast,cf-wr800n|\
-	hnet,c108|\
-	tplink,tl-wr902ac-v3|\
-	trendnet,tew-638apb-v2)
-		ucidef_add_switch "switch0" \
-			"4:lan" "6@eth0"
-		;;
-	cudy,wr1000|\
-	xiaomi,mir3g-v2)
-		ucidef_add_switch "switch0" \
-			"2:lan:2" "3:lan:1" "4:wan" "6@eth0"
-		;;
-	dlink,dir-510l|\
-	glinet,vixmini|\
-	netgear,ex6150|\
-	tplink,re350-v1|\
-	tplink,re650-v1)
-		ucidef_add_switch "switch0" \
-			"0:lan" "6@eth0"
-		;;
-	dlink,dir-615-h1|\
-	d-team,newifi-d2|\
-	wevo,11acnas|\
-	wevo,w2914ns-v2|\
-	zbtlink,zbt-we2026)
-		ucidef_add_switch "switch0" \
-			"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan:5" "6@eth0"
-		;;
-	dlink,dwr-118-a1)
-		ucidef_add_switch "switch0" \
-			"1:lan:2" "2:lan:3" "3:lan:1" "4:lan:0" "5:wan" "6@eth0"
-		;;
-	dlink,dwr-118-a2)
-		ucidef_add_switch "switch0" \
-			"1:lan:2" "2:lan:1" "3:lan:3" "4:lan" "0:wan" "6@eth0"
-		;;
-	duzun,dm06)
-		ucidef_add_switch "switch0" \
-			"1:lan" "0:wan" "6@eth0"
-		;;
-	edimax,br-6475nd)
-		ucidef_add_switch "switch0" \
-			"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9@eth0"
-		;;
-	edimax,br-6478ac-v2|\
-	tplink,archer-c2-v1)
-		ucidef_add_switch "switch1" \
-			"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0"
-		;;
-	engenius,esr600)
-		ucidef_add_switch "switch0" \
-			"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan" "0@eth0"
-		;;
-	fon,fon2601)
-		ucidef_add_switch "switch0" \
-			"0:lan" "4:wan" "6@eth0"
-		;;
-	edimax,rg21s)
-		ucidef_add_switch "switch0" \
-			"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0"
-		;;
-	gehua,ghl-r-001)
-		ucidef_add_switch "switch0" \
-			"0:lan" "1:lan" "2:lan" "4:wan" "6@eth0"
-		;;
-	glinet,gl-mt300n-v2)
-		ucidef_add_switch "switch0" \
-			"1:lan" "0:wan" "6@eth0"
-		;;
-	gnubee,gb-pc1|\
-	gnubee,gb-pc2)
-		ucidef_add_switch "switch0" \
-			"0:lan" "4:lan" "6@eth0"
-		;;
-	head-weblink,hdrm200)
-		ucidef_add_switch "switch0" \
-			"1:lan" "2:lan" "3:lan" "4:lan" "5:lan" "0:wan" "6@eth0"
-		;;
-	hiwifi,hc5761)
-		ucidef_add_switch "switch0" \
-			"1:lan" "4:lan" "0:wan" "6@eth0"
-		;;
-	hiwifi,hc5861)
-		ucidef_add_switch "switch0" \
-			"0:lan" "1:lan" "5:wan" "6@eth0"
-		;;
-	iodata,wn-ac1167gr|\
-	iodata,wn-ac733gr3)
-		ucidef_add_switch "switch1" \
-			"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0"
-		;;
-	iptime,a3)
-		ucidef_add_switch "switch0" \
-			"2:lan:2" "3:lan:1" "0:wan" "6@eth0"
-		;;
-	lava,lr-25g001|\
-	sitecom,wlr-6000|\
-	trendnet,tew-691gr|\
-	trendnet,tew-692gr)
-		ucidef_add_switch "switch0" \
-			"1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "0@eth0"
-		;;
-	lenovo,newifi-d1)
-		ucidef_add_switch "switch0" \
-		"1:lan:2" "2:lan:1" "4:wan" "6@eth0"
-		;;
-	lenovo,newifi-y1|\
-	zbtlink,zbt-we1226)
-		ucidef_add_switch "switch0" \
-			"0:lan:2" "1:lan:1" "4:wan" "6@eth0"
-		;;
-	lenovo,newifi-y1s)
-		ucidef_add_switch "switch0" \
-			"1:lan:4" "2:lan:3" "4:lan:2" "5:lan:1" "0:wan" "6@eth0"
-		;;
-	linksys,e1700|\
-	ralink,mt7620a-mt7530-evb)
-		ucidef_add_switch "switch1" \
-			"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
-		;;
-	linksys,re6500)
-		ucidef_add_switch "switch0" \
-			"0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "6@eth0"
-		;;
-	netgear,r6120|\
-	netgear,r6220|\
-	netgear,r6260|\
-	netgear,r6350|\
-	netgear,r6850|\
-	netgear,wndr3700-v5)
-		ucidef_add_switch "switch0" \
-			"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "6@eth0"
-		;;
-	nexx,wt1520-4m|\
-	nexx,wt1520-8m|\
-	vonets,var11n-300)
-		ucidef_add_switch "switch0" \
-			"0:lan" "4:wan" "6@eth0"
-		;;
-	nexx,wt3020-4m|\
-	nexx,wt3020-8m)
-		ucidef_add_switch "switch0" \
-			"4:lan" "0:wan" "6@eth0"
-		;;
-	phicomm,k2g)
-		ucidef_add_switch "switch0" \
-			"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5:wan" "6@eth0"
-		;;
-	phicomm,psg1218b)
-		ucidef_add_switch "switch0" \
-			"0:lan:3" "1:lan:2" "2:lan:1" "3:wan" "6@eth0"
-		;;
-	planex,mzk-dp150n|\
-	vocore,vocore-8m|\
-	vocore,vocore-16m)
-		ucidef_add_switch "switch0" \
-			"0:lan" "4:lan" "6t@eth0"
-		;;
-	samsung,cy-swr1100)
-		ucidef_add_switch "switch0" \
-			"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "9@eth0"
-		;;
-	sparklan,wcr-150gn|\
-	zbtlink,zbt-we1026-5g-16m)
-		ucidef_add_switch "switch0" \
-			"0:lan" "6t@eth0"
-		;;
-	tplink,archer-c20-v1|\
-	tplink,archer-c50-v1)
-		ucidef_add_switch "switch0" \
-			"1:lan:3" "2:lan:4" "3:lan:1" "4:lan:2" "0:wan" "6@eth0"
-		;;
-	tplink,archer-mr200)
-		ucidef_add_switch "switch0" \
-			"0:lan" "1:lan" "2:lan" "3:lan" "6t@eth0"
-		ucidef_set_interface_wan "usb0"
-		;;
-	vocore,vocore2|\
-	vocore,vocore2-lite)
-		ucidef_add_switch "switch0" \
-			"0:lan" "2:lan" "6t@eth0"
-		;;
-	wiznet,wizfi630a)
-		ucidef_add_switch "switch0" \
-			"0:lan" "1:lan" "2:wan" "6@eth0"
-		;;
-	wiznet,wizfi630s)
-		ucidef_add_switch "switch0" \
-			"0:wan" "3:lan" "4:lan" "6@eth0"
-		;;
-	xiaomi,mir3g)
-		ucidef_add_switch "switch0" \
-			"2:lan:2" "3:lan:1" "1:wan" "6t@eth0"
-		;;
-	xiaomi,mir3p)
-		ucidef_add_switch "switch0" \
-			"1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "6@eth0"
-		;;
-	xiaomi,mir4a-100m)
-		ucidef_add_switch "switch0" \
-			"4:lan:1" "2:lan:2" "0:wan" "6@eth0"
-		;;
-	zyxel,keenetic-omni-ii)
-		ucidef_add_switch "switch0" \
-			"0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6@eth0"
-		;;
-	zyxel,keenetic-start)
-		ucidef_add_switch "switch0" \
-			"0:lan:3" "1:lan:2" "2:lan:1" "3:lan:0" "4:wan" "6@eth0"
-		;;
-	zyxel,keenetic-viva)
-		ucidef_add_switch "switch1" \
-			"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "7t@eth0"
-		;;
-	*)
-		RT3X5X=$(grep -E "(RT3.5|RT5350)" /proc/cpuinfo)
-		if [ -n "${RT3X5X}" ]; then
-			ramips_setup_rt3x5x_vlans
-		else
-			ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
-		fi
-		;;
-	esac
-}
-
-ramips_setup_macs()
-{
-	local board="$1"
-	local lan_mac=""
-	local wan_mac=""
-
-	case $board in
-	8devices,carambola|\
-	alfa-network,w502u|\
-	arcwireless,freestation5|\
-	lenovo,newifi-y1|\
-	lenovo,newifi-y1s|\
-	netgear,wnce2001|\
-	ohyeah,oy-0001|\
-	phicomm,k2g|\
-	skylab,skw92a|\
-	totolink,lr1200)
-		wan_mac=$(mtd_get_mac_binary factory 0x2e)
-		;;
-	dlink,dir-300-b7|\
-	dlink,dir-320-b1|\
-	dlink,dir-620-a1|\
-	engenius,esr-9753|\
-	hame,mpr-a1|\
-	hauppauge,broadway|\
-	huawei,d105|\
-	hilink,hlk-7628n|\
-	hilink,hlk-rm04|\
-	nexaira,bc2|\
-	petatel,psr-680w|\
-	skyline,sl-r7205)
-		lan_mac=$(macaddr_setbit_la "$(cat /sys/class/net/eth0/address)")
-		wan_mac=$(macaddr_add "$lan_mac" 1)
-		;;
-	asus,rt-ac57u|\
-	d-team,newifi-d2|\
-	d-team,pbr-m1|\
-	elecom,wrc-1167ghbk2-s|\
-	elecom,wrc-1900gst|\
-	elecom,wrc-2533gst|\
-	lenovo,newifi-d1|\
-	phicomm,k2p|\
-	planex,vr500|\
-	samknows,whitebox-v8|\
-	youhua,wr1200js|\
-	youku,yk-l2|\
-	zbtlink,zbt-we3526)
-		wan_mac=$(mtd_get_mac_binary factory 0xe006)
-		;;
-	asus,rt-ac65p|\
-	asus,rt-ac85p)
-		wan_mac=$(mtd_get_mac_ascii u-boot-env et1macaddr)
-		label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
-		;;
-	asus,rt-n56u)
-		lan_mac=$(macaddr_setbit_la "$(cat /sys/class/net/eth0/address)")
-		wan_mac=$(mtd_get_mac_binary factory 0x8004)
-		;;
-	belkin,f9k1109v1)
-		wan_mac=$(mtd_get_mac_ascii uboot-env HW_WAN_MAC)
-		lan_mac=$(mtd_get_mac_ascii uboot-env HW_LAN_MAC)
-		label_mac=$wan_mac
-		;;
-	buffalo,wcr-1166ds|\
-	buffalo,wsr-1166dhp)
-		local index="$(find_mtd_index "board_data")"
-		wan_mac="$(grep -m1 mac= "/dev/mtd${index}" | cut -d= -f2)"
-		lan_mac=$wan_mac
-		;;
-	buffalo,whr-1166d|\
-	buffalo,whr-300hp2|\
-	buffalo,whr-600d|\
-	buffalo,whr-g300n|\
-	buffalo,wsr-600dhp|\
-	glinet,gl-mt300n-v2|\
-	xiaomi,miwifi-mini|\
-	zyxel,keenetic-start)
-		# This empty case has to be kept for devices without any MAC address adjustments
-		;;
-	cudy,wr1000)
-		wan_mac=$(mtd_get_mac_binary factory 0x2e)
-		label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
-		;;
-	dlink,dch-m225|\
-	samsung,cy-swr1100)
-		lan_mac=$(mtd_get_mac_ascii factory lanmac)
-		;;
-	dlink,dir-510l|\
-	dlink,dwr-116-a1|\
-	dlink,dwr-118-a1|\
-	dlink,dwr-118-a2|\
-	dlink,dwr-921-c1|\
-	dlink,dwr-922-e2|\
-	lava,lr-25g001)
-		wan_mac=$(jboot_config_read -m -i $(find_mtd_part "config") -o 0xE000)
-		lan_mac=$(macaddr_add "$wan_mac" 1)
-		label_mac=$wan_mac
-		;;
-	dlink,dir-615-d|\
-	dlink,dir-615-h1|\
-	glinet,gl-mt300a|\
-	glinet,gl-mt300n|\
-	glinet,gl-mt750|\
-	zbtlink,zbt-wg3526-16m|\
-	zbtlink,zbt-wg3526-32m)
-		wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 1)
-		label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
-		;;
-	dlink,dir-645)
-		lan_mac=$(mtd_get_mac_ascii nvram lanmac)
-		wan_mac=$(mtd_get_mac_ascii nvram wanmac)
-		;;
-	dlink,dir-860l-b1)
-		lan_mac=$(mtd_get_mac_ascii factory lanmac)
-		wan_mac=$(mtd_get_mac_ascii factory wanmac)
-		label_mac=$(cat /sys/class/ieee80211/phy1/macaddress)
-		;;
-	dovado,tiny-ac)
-		lan_mac=$(mtd_get_mac_ascii u-boot-env LAN_MAC_ADDR)
-		wan_mac=$(mtd_get_mac_ascii u-boot-env WAN_MAC_ADDR)
-		;;
-	edimax,br-6475nd)
-		wan_mac=$(mtd_get_mac_binary devdata 0x7)
-		;;
-	edimax,br-6478ac-v2|\
-	netgear,r6260|\
-	netgear,r6350|\
-	netgear,r6850)
-		wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
-		;;
-	edimax,rg21s|\
-	engenius,esr600)
-		lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
-		wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
-		;;
-	hiwifi,hc5661|\
-	hiwifi,hc5661a|\
-	hiwifi,hc5761|\
-	hiwifi,hc5761a|\
-	hiwifi,hc5861|\
-	hiwifi,hc5861b|\
-	hiwifi,hc5962)
-		lan_mac=$(mtd_get_mac_ascii bdinfo "Vfac_mac ")
-		label_mac=$lan_mac
-		[ -n "$lan_mac" ] || lan_mac=$(cat /sys/class/net/eth0/address)
-		wan_mac=$(macaddr_add "$lan_mac" 1)
-		;;
-	iodata,wn-ac1167gr|\
-	iodata,wn-ac733gr3)
-		wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
-		;;
-	iodata,wn-ax1167gr|\
-	iodata,wn-gx300gr|\
-	trendnet,tew-692gr)
-		wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x4)" 1)
-		;;
-	iodata,wnpr2600g)
-		wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
-		label_mac=$wan_mac
-		;;
-	iptime,a3|\
-	iptime,a604m)
-		wan_mac=$(mtd_get_mac_binary u-boot 0x1fc40)
-		;;
-	linksys,e1700)
-		wan_mac=$(mtd_get_mac_ascii config WAN_MAC_ADDR)
-		;;
-	mediatek,linkit-smart-7688|\
-	onion,omega2|\
-	onion,omega2p)
-		wan_mac=$(mtd_get_mac_binary factory 0x4)
-		lan_mac=$(mtd_get_mac_binary factory 0x2e)
-		;;
-	mercury,mac1200r-v2)
-		wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory_info 0xd)" 1)
-		;;
-	poray,m3|\
-	poray,m4-4m|\
-	poray,m4-8m|\
-	poray,x5|\
-	poray,x8)
-		lan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" -2)
-		;;
-	sitecom,wlr-6000)
-		wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x8004)" 2)
-		;;
-	sparklan,wcr-150gn|\
-	wiznet,wizfi630a|\
-	zyxel,keenetic-omni|\
-	zyxel,keenetic-omni-ii|\
-	zyxel,keenetic-viva)
-		wan_mac=$(mtd_get_mac_binary factory 0x28)
-		;;
-	tenda,w306r-v2)
-		wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 5)
-		;;
-	trendnet,tew-691gr)
-		wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x4)" 3)
-		;;
-	vocore,vocore2|\
-	vocore,vocore2-lite)
-		label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
-		;;
-	xiaomi,mir3g)
-		lan_mac=$(mtd_get_mac_binary factory 0xe006)
-		;;
-	xiaomi,mir3g-v2)
-		wan_mac=$(mtd_get_mac_binary factory 0xe006)
-		label_mac=$wan_mac
-		;;
-	xiaomi,mir3p)
-		lan_mac=$(mtd_get_mac_binary factory 0xe006)
-		label_mac=$lan_mac
-		;;
-	zbtlink,zbt-we1326)
-		wan_mac=$(mtd_get_mac_binary factory 0xe006)
-		label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
-		;;
-	*)
-		wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 1)
-		;;
-	esac
-
-	[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
-	[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
-	[ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
-}
-
-board_config_update
-board=$(board_name)
-ramips_setup_interfaces $board
-ramips_setup_macs $board
-board_config_flush
-
-exit 0
diff --git a/target/linux/ramips/base-files/etc/board.d/03_gpio_switches b/target/linux/ramips/base-files/etc/board.d/03_gpio_switches
deleted file mode 100755
index 9acd78ea0b..0000000000
--- a/target/linux/ramips/base-files/etc/board.d/03_gpio_switches
+++ /dev/null
@@ -1,46 +0,0 @@
-#!/bin/sh
-
-. /lib/functions/uci-defaults.sh
-
-board_config_update
-
-board=$(board_name)
-
-case "$board" in
-dlink,dir-510l)
-	ucidef_add_gpio_switch "usb_enable1" "USB 1A enable" "12" "0"
-	ucidef_add_gpio_switch "usb_enable05" "USB 0.5A enable" "13" "1"
-	;;
-head-weblink,hdrm200)
-	ucidef_add_gpio_switch "sim_switch" "SIM slot switch" "0"
-	ucidef_add_gpio_switch "io1" "I/O 1" "1"
-	ucidef_add_gpio_switch "io2" "I/O 2" "2"
-	ucidef_add_gpio_switch "io3" "I/O 3" "11"
-	ucidef_add_gpio_switch "io4" "I/O 4" "14"
-	ucidef_add_gpio_switch "power_mpcie" "mPCIe power" "21" "1"
-	;;
-mikrotik,rb750gr3)
-	ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "17"
-	;;
-telco-electronics,x1)
-	ucidef_add_gpio_switch "modem_reset" "Modem Reset" "16"
-	;;
-ubiquiti,edgerouterx)
-	ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "0"
-	;;
-ubiquiti,edgerouterx-sfp)
-	ucidef_add_gpio_switch "poe_power_port0" "PoE Power Port0" "496"
-	ucidef_add_gpio_switch "poe_power_port1" "PoE Power Port1" "497"
-	ucidef_add_gpio_switch "poe_power_port2" "PoE Power Port2" "498"
-	ucidef_add_gpio_switch "poe_power_port3" "PoE Power Port3" "499"
-	ucidef_add_gpio_switch "poe_power_port4" "PoE Power Port4" "500"
-	;;
-zbtlink,zbt-we826-e)
-	ucidef_add_gpio_switch "sim_switch" "SIM slot switch" "13"
-	ucidef_add_gpio_switch "power_mpcie" "mPCIe power" "14" "1"
-	;;
-esac
-
-board_config_flush
-
-exit 0
diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
deleted file mode 100644
index f33ed82f62..0000000000
--- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ /dev/null
@@ -1,47 +0,0 @@
-#!/bin/sh
-
-[ -e /lib/firmware/$FIRMWARE ] && exit 0
-
-. /lib/functions/caldata.sh
-
-jboot_eeprom_extract() {
-	local part=$1
-	local offset=$2
-	local mtd
-
-	mtd=$(find_mtd_part $part)
-	[ -n "$mtd" ] || \
-		caldata_die "no mtd device found for partition $part"
-
-	jboot_config_read -i $mtd -o $offset -e /lib/firmware/$FIRMWARE  2>/dev/null || \
-		caldata_die "failed to extract from $mtd"
-}
-
-board=$(board_name)
-
-case "$FIRMWARE" in
-"soc_wmac.eeprom")
-	case $board in
-	dlink,dir-510l|\
-	dlink,dwr-116-a1|\
-	dlink,dwr-118-a1|\
-	dlink,dwr-118-a2|\
-	dlink,dwr-921-c1|\
-	dlink,dwr-922-e2|\
-	lava,lr-25g001)
-		wan_mac=$(jboot_config_read -m -i $(find_mtd_part "config") -o 0xE000)
-		wifi_mac=$(macaddr_add "$wan_mac" 1)
-		jboot_eeprom_extract "config" 0xE000
-		caldata_patch_mac $wifi_mac 0x4
-		;;
-	dovado,tiny-ac)
-		wifi_mac=$(mtd_get_mac_ascii u-boot-env INIC_MAC_ADDR)
-		caldata_extract "factory" 0x0 0x200
-		caldata_patch_mac $wifi_mac 0x4
-		;;
-	*)
-		caldata_die "Please define mtd-eeprom in $board DTS file!"
-		;;
-	esac
-	;;
-esac
diff --git a/target/linux/ramips/base-files/lib/preinit/04_handle_checksumming b/target/linux/ramips/base-files/lib/preinit/04_handle_checksumming
deleted file mode 100644
index 8f741faf9d..0000000000
--- a/target/linux/ramips/base-files/lib/preinit/04_handle_checksumming
+++ /dev/null
@@ -1,56 +0,0 @@
-#!/bin/sh
-
-# Netgear WNCE2001 has does a checksum check on boot and goes into recovery
-# tftp mode when the check fails.  Initializing the JFFS2 partition triggers
-# this, so we make sure to zero checksum and size to be checksummed before
-# that happens, so this needs to run very early during boot.
-
-do_checksumming_disable() {
-	. /lib/functions.sh
-
-	local board=$(board_name)
-
-	case "$board" in
-	netgear,wnce2001)
-		echo "Board is WNCE2001, updating checksum partition..."
-		local zeroes=/dev/zero
-		local tmpfile=/tmp/wnce2001_checksum
-		local partname=checksum
-		local mtd=$(find_mtd_part $partname)
-		dd if=$mtd of=$tmpfile bs=80 count=1 2>/dev/null
-		signature=$(dd if=$tmpfile bs=1 skip=24 count=20 2>/dev/null)
-		checksum=$(dd if=$tmpfile bs=1 count=4 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"')
-		if [ "$signature" != "RT3052-AP-WNCE2001-3" ]; then
-			echo "Signature of checksum partition is wrong, bailing."
-			return 0
-		fi
-		if [ "$checksum" != "00000000" ]; then
-			echo "Checksum is set, zeroing."
-			# zero out checksum
-			dd if=$zeroes of=$tmpfile conv=notrunc bs=1 seek=0 count=4 2>/dev/null
-			# zero out bytecount to be checksummed
-			dd if=$zeroes of=$tmpfile conv=notrunc bs=1 seek=60 count=4 2>/dev/null
-			mtd write $tmpfile $partname
-		else
-			echo "Checksum is already zero, nothing to do."
-		fi
-	;;
-	asus,rt-n56u)
-		echo "Board is ASUS RT-N56U, replacing uImage header..."
-		local firmware_mtd=$(find_mtd_part firmware)
-		local rootfs_mtd=$(find_mtd_part rootfs)
-		local rootfs_data_mtd=$(find_mtd_part rootfs_data)
-		local rootfs_len=$(grep \"rootfs\" /proc/mtd | awk -F' ' '{print "0x"$2}')
-		local rootfs_data_len=$(grep \"rootfs_data\" /proc/mtd | awk -F' ' '{print "0x"$2}')
-		local offset=$(echo "$rootfs_len $rootfs_data_len 0x40" | awk -F' ' '{printf "%i",$1-$2-$3}')
-		local signature=$(dd if=$rootfs_mtd skip=$offset bs=1 count=4 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"')
-		if [ "$signature" = "27051956" ]; then
-			dd conv=notrunc if=$rootfs_mtd skip=$offset of=$firmware_mtd bs=1 count=64 2>/dev/null
-		fi
-	;;
-	esac
-
-	return 0
-}
-
-boot_hook_add preinit_main do_checksumming_disable
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
deleted file mode 100755
index 03e994dfa4..0000000000
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ /dev/null
@@ -1,54 +0,0 @@
-#
-# Copyright (C) 2010 OpenWrt.org
-#
-
-PART_NAME=firmware
-REQUIRE_IMAGE_METADATA=1
-
-platform_check_image() {
-	return 0
-}
-
-platform_do_upgrade() {
-	local board=$(board_name)
-
-	case "$board" in
-	mikrotik,rb750gr3|\
-	mikrotik,rbm11g|\
-	mikrotik,rbm33g)
-		[ -z "$(rootfs_type)" ] && mtd erase firmware
-		;;
-	asus,rt-ac65p|\
-	asus,rt-ac85p)
-		echo "Backing up firmware"
-		dd if=/dev/mtd4 bs=1024 count=4096  > /tmp/backup_firmware.bin
-		dd if=/dev/mtd5 bs=1024 count=52224 >> /tmp/backup_firmware.bin
-		mtd -e firmware2 write /tmp/backup_firmware.bin firmware2
-		;;
-	esac
-
-	case "$board" in
-	asus,rt-ac65p|\
-	asus,rt-ac85p|\
-	hiwifi,hc5962|\
-	netgear,r6220|\
-	netgear,r6260|\
-	netgear,r6350|\
-	netgear,r6850|\
-	xiaomi,mir3g|\
-	xiaomi,mir3p)
-		nand_do_upgrade "$1"
-		;;
-	tplink,archer-c50-v4)
-		MTD_ARGS="-t romfile"
-		default_do_upgrade "$1"
-		;;
-	ubiquiti,edgerouterx|\
-	ubiquiti,edgerouterx-sfp)
-		platform_upgrade_ubnt_erx "$1"
-		;;
-	*)
-		default_do_upgrade "$1"
-		;;
-	esac
-}
diff --git a/target/linux/ramips/base-files/lib/upgrade/ubnt.sh b/target/linux/ramips/base-files/lib/upgrade/ubnt.sh
deleted file mode 100644
index 748ec8e628..0000000000
--- a/target/linux/ramips/base-files/lib/upgrade/ubnt.sh
+++ /dev/null
@@ -1,78 +0,0 @@
-#
-# Copyright (C) 2015 OpenWrt.org
-#
-
-. /lib/functions.sh
-#Note: this code also uses some functions from nand.sh, but it is expected to be run by nand.sh, so we are not
-#sourcing it explicitly here
-
-UBNT_ERX_KERNEL_INDEX_OFFSET=160
-
-ubnt_get_target_kernel() {
-	local factory_mtd=$1
-	local current_kernel_index=$(hexdump -s $UBNT_ERX_KERNEL_INDEX_OFFSET -n 1 -e '/1 "%X "' ${factory_mtd})
-
-	if [ $current_kernel_index == "0" ]; then
-		echo 'kernel2'
-	elif [ $current_kernel_index == "1" ]; then
-		echo 'kernel1'
-	fi
-}
-
-ubnt_update_target_kernel() {
-	local factory_mtd=$1
-	local kernel_part=$2
-
-	local new_kernel_index
-	if [ $kernel_part == "kernel1" ]; then
-		new_kernel_index="\x00"
-	elif [ $kernel_part == "kernel2" ]; then
-		new_kernel_index="\x01"
-	else
-		echo 'Unknown kernel image index' >&2
-		return 1
-	fi
-
-	if ! (echo -e $new_kernel_index | dd of=${factory_mtd} bs=1 count=1 seek=$UBNT_ERX_KERNEL_INDEX_OFFSET); then
-		echo 'Failed to update kernel bootup index' >&2
-		return 1
-	fi
-}
-
-platform_upgrade_ubnt_erx() {
-	local factory_mtd=$(find_mtd_part factory)
-	if [ -z "$factory_mtd" ]; then
-		echo "cannot find factory partition" >&2
-		exit 1
-	fi
-
-	local kernel_part="$(ubnt_get_target_kernel ${factory_mtd})"
-	if [ -z "$kernel_part" ]; then
-		echo "cannot find factory partition" >&2
-		exit 1
-	fi
-
-	# This is a global defined in nand.sh, sets partition kernel will be flashed into
-	CI_KERNPART=${kernel_part}
-
-	#Remove volume possibly left over from stock firmware
-	local ubidev="$( nand_find_ubi "$CI_UBIPART" )"
-	if [ -z "$ubidev" ]; then
-		local mtdnum="$( find_mtd_index "$CI_UBIPART" )"
-		if [ -z "$mtdnum" ]; then
-			echo "cannot find ubi mtd partition $CI_UBIPART" >&2
-			exit 1
-		fi
-		ubiattach -m "$mtdnum"
-		sync
-		ubidev="$( nand_find_ubi "$CI_UBIPART" )"
-	fi
-	if [ -n "$ubidev" ]; then
-		local troot_ubivol="$( nand_find_volume $ubidev troot )"
-		[ -n "$troot_ubivol" ] && ubirmvol /dev/$ubidev -N troot || true
-	fi
-
-	ubnt_update_target_kernel ${factory_mtd} ${kernel_part} || exit 1
-
-	nand_do_upgrade "$1"
-}
diff --git a/target/linux/ramips/base-files/sbin/fixup-mac-address b/target/linux/ramips/base-files/sbin/fixup-mac-address
deleted file mode 100755
index dad15c5842..0000000000
--- a/target/linux/ramips/base-files/sbin/fixup-mac-address
+++ /dev/null
@@ -1,80 +0,0 @@
-#!/bin/sh
-. /lib/functions.sh
-. /lib/functions/system.sh
-
-partname=""
-offset=""
-NEW_MAC=
-YES=
-
-board=$(board_name)
-case $board in
-	mqmaker,witi)
-		partname=factory
-		offset=$((0xe000))
-	;;
-	*)
-		echo "Unsupported board"
-		exit 1
-	;;
-esac
-
-while [ -n "$1" ]; do
-	case "$1" in
-		??:??:??:??:??:??) NEW_MAC="$1";;
-		-y) YES=1;;
-		*)
-			cat <<EOF
-Unknown option/argument '$1'
-Usage: $0 [-y] [<macaddr>]
-EOF
-			exit 1
-		;;
-	esac
-	shift
-done
-
-ask_bool() {
-	local message="$1"
-	local default="$((! ${2:-0}))"
-	[ -n "$YES" ] && return 0
-	echo -n "$message "
-	read opt
-	case "$opt" in
-		y|Y) return 0;;
-		n|N) return 1;;
-		*) return $default;;
-	esac
-}
-
-convert_hex() {
-	hexdump -e '/1 "%02x "'
-}
-
-gen_mac() {
-	dd if=/dev/urandom bs=6 count=1 2>/dev/null
-}
-
-mac="$(mtd_get_mac_binary $partname $offset)"
-case "$mac" in
-	00:00:00:00:00:00);;
-	ff:ff:ff:ff:ff:ff);;
-	*)
-		echo "Current MAC address: $mac"
-		ask_bool "Overwrite (y/N)?" 0 || exit
-	;;
-esac
-
-if [ -n "$NEW_MAC" ]; then
-	set -- $(echo "$NEW_MAC" | sed 's,:, ,g')
-else
-	set -- $(gen_mac | convert_hex)
-	set -- $(printf %02x $(( (0x$1 & 0xfe) | 0x02 ))) $2 $3 $4 $5 $6
-fi
-echo "New MAC address: $1:$2:$3:$4:$5:$6"
-ask_bool "Write to EEPROM (y/N)?" || exit
-
-part=$(find_mtd_part "$partname")
-[ -n "$part" ] || exit
-echo -ne "\x$1\x$2\x$3\x$4\x$5\x$6" | dd of=$part conv=notrunc bs=1 count=6 seek=$offset 2>/dev/null
-echo "Done"