board.d: merge ucidef_add_switch() and ucidef_add_switch_ports()

This changes uci-defaults-new.sh, config_generate and all relevant board.d
files in order combine ucidef_add_switch() and ucidef_add_switch_ports() into
a single function.

Also removes now superfluous enable and reset arguments.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47721

1 files changed, 20 insertions, 40 deletions

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index c8bdc77a69..3cfb6bac66 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -25,8 +25,7 @@ ramips_setup_rt3x5x_vlans()
 		fi
 	done
 	ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
-	ucidef_add_switch "rt305x" "1" "1"
-	ucidef_add_switch_ports "rt305x" $lanports $wanports "6@eth0"
+	ucidef_add_switch "rt305x" $lanports $wanports "6@eth0"
 }
 
 ramips_setup_interfaces()
@@ -88,14 +87,12 @@ ramips_setup_interfaces()
 	zbt-wg2626|\
 	youku-yk1)
 		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
-		ucidef_add_switch "switch0" "1" "1"
-		ucidef_add_switch_ports "switch0" \
+		ucidef_add_switch "switch0" \
 			"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
 		;;
 	a5-v11)
 		ucidef_set_interface_lan "eth0.1"
-		ucidef_add_switch "switch0" "1" "1"
-		ucidef_add_switch_ports "switch0" \
+		ucidef_add_switch "switch0" \
 			"0:lan" "6t@eth0"
 		;;
 	ar670w|\
@@ -103,16 +100,14 @@ ramips_setup_interfaces()
 	rt-n15|\
 	wl-351)
 		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
-		ucidef_add_switch "switch0" "1" "1"
-		ucidef_add_switch_ports "switch0" \
+		ucidef_add_switch "switch0" \
 			"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0"
 		;;
 	asl26555|\
 	re6500|\
 	rp-n53)
 		ucidef_set_interface_lan "eth0.1"
-		ucidef_add_switch "switch0" "1" "1"
-		ucidef_add_switch_ports "switch0" \
+		ucidef_add_switch "switch0" \
 			"1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0"
 		;;
 	atp-52b|\
@@ -129,14 +124,12 @@ ramips_setup_interfaces()
 	wt3020|\
 	zbt-wa05)
 		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
-		ucidef_add_switch "switch0" "1" "1"
-		ucidef_add_switch_ports "switch0" \
+		ucidef_add_switch "switch0" \
 			"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0"
 		;;
 	awapn2403)
 		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
-		ucidef_add_switch "switch0" "1" "1"
-		ucidef_add_switch_ports "switch0" \
+		ucidef_add_switch "switch0" \
 			"0:lan" "1:wan" "6@eth0"
 		;;
 	b2c|\
@@ -150,20 +143,17 @@ ramips_setup_interfaces()
 		;;
 	br-6475nd)
 		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
-		ucidef_add_switch "switch0" "1" "1"
-		ucidef_add_switch_ports "switch0" \
+		ucidef_add_switch "switch0" \
 			"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9@eth0"
 		;;
 	cf-wr800n)
 		ucidef_set_interface_lan "eth0.1"
-		ucidef_add_switch "switch0" "1" "1"
-		ucidef_add_switch_ports "switch0" \
+		ucidef_add_switch "switch0" \
 			"4:lan" "6t@eth0"
 		;;
 	cy-swr1100)
 		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
-		ucidef_add_switch "switch0" "1" "1"
-		ucidef_add_switch_ports "switch0" \
+		ucidef_add_switch "switch0" \
 			"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "9@eth0"
 		;;
 	d105|\
@@ -175,15 +165,13 @@ ramips_setup_interfaces()
 	e1700|\
 	mt7620a_mt7530)
 		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
-		ucidef_add_switch "switch1" "1" "1"
-		ucidef_add_switch_ports "switch1" \
+		ucidef_add_switch "switch1" \
 			"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
 		;;
 	hc5*61|\
 	y1s)
 		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
-		ucidef_add_switch "switch0" "1" "1"
-		ucidef_add_switch_ports "switch0" \
+		ucidef_add_switch "switch0" \
 			"1:lan" "2:lan" "3:lan" "4:lan" "5:lan" "0:wan" "6@eth0"
 		;;
 	m2m)
@@ -200,52 +188,44 @@ ramips_setup_interfaces()
 	mzk-dp150n|\
 	vocore)
 		ucidef_set_interface_lan "eth0.1"
-		ucidef_add_switch "switch0" "1" "1"
-		ucidef_add_switch_ports "switch0" \
+		ucidef_add_switch "switch0" \
 			"0:lan" "4:lan" "6t@eth0"
 		;;
 	rt-n56u)
 		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
-		ucidef_add_switch "switch0" "1" "1"
-		ucidef_add_switch_ports "switch0" \
+		ucidef_add_switch "switch0" \
 			"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "8@eth0"
 		;;
 	tew-691gr|\
 	tew-692gr)
 		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
-		ucidef_add_switch "switch0" "1" "1"
-		ucidef_add_switch_ports "switch0" \
+		ucidef_add_switch "switch0" \
 			"1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "0@eth0"
 		;;
 	v11st-fe|\
 	wzr-agl300nh)
 		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
-		ucidef_add_switch "switch0" "1" "1"
-		ucidef_add_switch_ports "switch0" \
+		ucidef_add_switch "switch0" \
 			"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
 		;;
 	wcr-150gn)
 		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
-		ucidef_add_switch "switch0" "1" "1"
-		ucidef_add_switch_ports "switch0" \
+		ucidef_add_switch "switch0" \
 			"0:lan" "6t@eth0"
 		;;
 	whr-1166d)
 		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
-		ucidef_add_switch "switch0" "1" "1"
-		ucidef_add_switch_ports "switch0" \
+		ucidef_add_switch "switch0" \
 			"0:lan" "1:lan" "2:lan" "3:lan" "5:wan" "6@eth0"
 		;;
 	wizfi630a)
 		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
-		ucidef_add_switch "switch0" "1" "1"
-		ucidef_add_switch_ports "switch0" \
+		ucidef_add_switch "switch0" \
 			"1:lan" "2:lan" "0:wan" "6@eth0"
 		;;
 	zbt-wr8305rt)
 		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
-		ucidef_add_switch "switch0" "1" "1"
-		ucidef_add_switch_ports "switch0" \
+		ucidef_add_switch "switch0" \
 			"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
 		;;
 	*)