aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/base-files/etc/board.d/01_leds
diff options
context:
space:
mode:
authorGeorgi Vlaev <georgi.vlaev@gmail.com>2019-04-17 21:17:45 +0300
committerDavid Bauer <mail@david-bauer.net>2019-07-17 23:14:23 +0200
commit8c51ddeff0876b439ac35a3f492ab719085bfb9c (patch)
tree1b442df904a7c4c884a54d9ded0d1dc936cf2013 /target/linux/ramips/base-files/etc/board.d/01_leds
parentd6198d8625310cd1ad22113f137e48261fcc8ff6 (diff)
downloadupstream-8c51ddeff0876b439ac35a3f492ab719085bfb9c.tar.gz
upstream-8c51ddeff0876b439ac35a3f492ab719085bfb9c.tar.bz2
upstream-8c51ddeff0876b439ac35a3f492ab719085bfb9c.zip
ramips: add support for TP-Link RE650 v1
TP-Link RE650 v1 is a dual-band AC2600 range extender, based on MediaTek MT7621A and MT7615E. According to the wikidevi entry for RE650 this device is identical with TP-Link RE500 as hardware. This patch supports only RE650. Hardware specification: - SoC 880 MHz - MediaTek MT7621AT - 128 MB of DDR3 RAM - 16 MB - Winbond 25Q128FVSG - 4T4R 2.4 GHz - MediaTek MT7615E - 4T4R 5 GHz - MediaTek MT7615E - 1x 1 Gbps Ethernet - MT7621AT integrated - 7x LEDs (Power, 2G, 5G, WPS(x2), Lan(x2)) - 4x buttons (Reset, Power, WPS, LED) - UART header (J1) - 2:GND, 3:RX, 4:TX Serial console @ 57600,8n1 Flash instructions: Upload openwrt-ramips-mt7621-tplink_re650-v1-squashfs-factory.bin from the RE650 web interface. TFTP recovery to stock firmware: Unfortunately, I can't find an easy way to recover the RE without opening the device and using modified binaries. The TFTP upload will only work if selected from u-boot, which means you have to open the device and attach to the serial console. The TFTP update procedure does *not* accept the published vendor firmware binaries. However, it allows to flash kernel + rootfs binaries, and this works if you have a backup of the original contents of the flash. It's probably possible to create special image out of the vendor binaries and use that as recovery image. Signed-off-by: Georgi Vlaev <georgi.vlaev@gmail.com> [re-added variables for kernel header] Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'target/linux/ramips/base-files/etc/board.d/01_leds')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/01_leds3
1 files changed, 2 insertions, 1 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 47637096a0..57f09396ac 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -347,7 +347,8 @@ tplink,archer-mr200)
ucidef_set_led_netdev "wan" "wan" "$boardname:white:wan" "usb0"
set_wifi_led "$boardname:white:wlan"
;;
-tplink,re350-v1)
+tplink,re350-v1|\
+tplink,re650-v1)
ucidef_set_led_netdev "wifi2g" "Wifi 2.4G" "$boardname:blue:wifi2G" "wlan0"
ucidef_set_led_netdev "wifi5g" "Wifi 5G" "$boardname:blue:wifi5G" "wlan1"
ucidef_set_led_netdev "eth_act" "LAN act" "$boardname:green:eth_act" "eth0" "tx rx"