oxnas: switch to kernel 5.4 and remove kernel 4.14

Run-tested 5.4 on Shuttle KD20 for some days now, everything seems
fine so far. Let's have snapshot builds based on 5.4.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

2 files changed, 822 insertions, 0 deletions

diff --git a/target/linux/oxnas/files/drivers/pci/controller/pcie-oxnas.c b/target/linux/oxnas/files/drivers/pci/controller/pcie-oxnas.c
new file mode 100644
index 0000000000..f2145e31b5
--- /dev/null
+++ b/target/linux/oxnas/files/drivers/pci/controller/pcie-oxnas.c
@@ -0,0 +1,674 @@
+/*
+ * PCIe driver for PLX NAS782X SoCs
+ *
+ * Author: Ma Haijun <mahaijuns@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/mbus.h>
+#include <linux/mfd/syscon.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/of_irq.h>
+#include <linux/of_pci.h>
+#include <linux/of_platform.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/phy.h>
+#include <linux/phy/phy.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/io.h>
+#include <linux/sizes.h>
+
+#include "../pci.h"
+
+#define SYS_CTRL_HCSL_CTRL_REGOFFSET	0x114
+
+static inline void oxnas_register_clear_mask(void __iomem *p, unsigned mask)
+{
+	u32 val = readl_relaxed(p);
+
+	val &= ~mask;
+	writel_relaxed(val, p);
+}
+
+static inline void oxnas_register_set_mask(void __iomem *p, unsigned mask)
+{
+	u32 val = readl_relaxed(p);
+
+	val |= mask;
+	writel_relaxed(val, p);
+}
+
+static inline void oxnas_register_value_mask(void __iomem *p,
+					     unsigned mask, unsigned new_value)
+{
+	/* TODO sanity check mask & new_value = new_value */
+	u32 val = readl_relaxed(p);
+
+	val &= ~mask;
+	val |= new_value;
+	writel_relaxed(val, p);
+}
+
+#define VERSION_ID_MAGIC		0x082510b5
+#define LINK_UP_TIMEOUT_SECONDS		1
+#define NUM_CONTROLLERS			1
+
+enum {
+	PCIE_DEVICE_TYPE_MASK = 0x0F,
+	PCIE_DEVICE_TYPE_ENDPOINT = 0,
+	PCIE_DEVICE_TYPE_LEGACY_ENDPOINT = 1,
+	PCIE_DEVICE_TYPE_ROOT = 4,
+
+	PCIE_LTSSM = BIT(4),
+	PCIE_READY_ENTR_L23 = BIT(9),
+	PCIE_LINK_UP = BIT(11),
+	PCIE_OBTRANS = BIT(12),
+};
+
+/* core config registers */
+enum {
+	PCI_CONFIG_VERSION_DEVICEID = 0,
+	PCI_CONFIG_COMMAND_STATUS = 4,
+};
+
+/* inbound config registers */
+enum {
+	IB_ADDR_XLATE_ENABLE = 0xFC,
+
+	/* bits */
+	ENABLE_IN_ADDR_TRANS = BIT(0),
+};
+
+/* outbound config registers, offset relative to PCIE_POM0_MEM_ADDR */
+enum {
+	PCIE_POM0_MEM_ADDR	= 0,
+	PCIE_POM1_MEM_ADDR	= 4,
+	PCIE_IN0_MEM_ADDR	= 8,
+	PCIE_IN1_MEM_ADDR	= 12,
+	PCIE_IN_IO_ADDR		= 16,
+	PCIE_IN_CFG0_ADDR	= 20,
+	PCIE_IN_CFG1_ADDR	= 24,
+	PCIE_IN_MSG_ADDR	= 28,
+	PCIE_IN0_MEM_LIMIT	= 32,
+	PCIE_IN1_MEM_LIMIT	= 36,
+	PCIE_IN_IO_LIMIT	= 40,
+	PCIE_IN_CFG0_LIMIT	= 44,
+	PCIE_IN_CFG1_LIMIT	= 48,
+	PCIE_IN_MSG_LIMIT	= 52,
+	PCIE_AHB_SLAVE_CTRL	= 56,
+
+	PCIE_SLAVE_BE_SHIFT	= 22,
+};
+
+#define PCIE_SLAVE_BE(val)	((val) << PCIE_SLAVE_BE_SHIFT)
+#define PCIE_SLAVE_BE_MASK	PCIE_SLAVE_BE(0xF)
+
+struct oxnas_pcie_shared {
+	/* seems all access are serialized, no lock required */
+	int refcount;
+};
+
+/* Structure representing one PCIe interfaces */
+struct oxnas_pcie {
+	void __iomem *cfgbase;
+	void __iomem *base;
+	void __iomem *inbound;
+	struct regmap *sys_ctrl;
+	unsigned int outbound_offset;
+	unsigned int pcie_ctrl_offset;
+	struct phy *phy;
+	int haslink;
+	struct platform_device *pdev;
+	struct resource io;
+	struct resource cfg;
+	struct resource pre_mem;	/* prefetchable */
+	struct resource non_mem;	/* non-prefetchable */
+	struct resource busn;		/* max available bus numbers */
+	int card_reset;			/* gpio pin, optional */
+	unsigned hcsl_en;		/* hcsl pci enable bit */
+	struct clk *clk;
+	struct clk *busclk;		/* for pcie bus, actually the PLLB */
+	void *private_data[1];
+	spinlock_t lock;
+};
+
+static struct oxnas_pcie_shared pcie_shared = {
+	.refcount = 0,
+};
+
+static inline struct oxnas_pcie *sys_to_pcie(struct pci_sys_data *sys)
+{
+	return sys->private_data;
+}
+
+
+static inline void set_out_lanes(struct oxnas_pcie *pcie, unsigned lanes)
+{
+	regmap_update_bits(pcie->sys_ctrl, pcie->outbound_offset + PCIE_AHB_SLAVE_CTRL,
+				  PCIE_SLAVE_BE_MASK, PCIE_SLAVE_BE(lanes));
+	wmb();
+}
+
+static int oxnas_pcie_link_up(struct oxnas_pcie *pcie)
+{
+	unsigned long end;
+	unsigned int val;
+
+	/* Poll for PCIE link up */
+	end = jiffies + (LINK_UP_TIMEOUT_SECONDS * HZ);
+	while (!time_after(jiffies, end)) {
+		regmap_read(pcie->sys_ctrl, pcie->pcie_ctrl_offset, &val);
+		if (val & PCIE_LINK_UP)
+			return 1;
+	}
+	return 0;
+}
+
+static void oxnas_pcie_setup_hw(struct oxnas_pcie *pcie)
+{
+	/* We won't have any inbound address translation. This allows PCI
+	 * devices to access anywhere in the AHB address map. Might be regarded
+	 * as a bit dangerous, but let's get things working before we worry
+	 * about that
+	 */
+	oxnas_register_clear_mask(pcie->inbound + IB_ADDR_XLATE_ENABLE,
+				  ENABLE_IN_ADDR_TRANS);
+	wmb();
+
+	/*
+	 * Program outbound translation windows
+	 *
+	 * Outbound window is what is referred to as "PCI client" region in HRM
+	 *
+	 * Could use the larger alternative address space to get >>64M regions
+	 * for graphics cards etc., but will not bother at this point.
+	 *
+	 * IP bug means that AMBA window size must be a power of 2
+	 *
+	 * Set mem0 window for first 16MB of outbound window non-prefetchable
+	 * Set mem1 window for second 16MB of outbound window prefetchable
+	 * Set io window for next 16MB of outbound window
+	 * Set cfg0 for final 1MB of outbound window
+	 *
+	 * Ignore mem1, cfg1 and msg windows for now as no obvious use cases for
+	 * 820 that would need them
+	 *
+	 * Probably ideally want no offset between mem0 window start as seen by
+	 * ARM and as seen on PCI bus and get Linux to assign memory regions to
+	 * PCI devices using the same "PCI client" region start address as seen
+	 * by ARM
+	 */
+
+	/* Set PCIeA mem0 region to be 1st 16MB of the 64MB PCIeA window */
+	regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_IN0_MEM_ADDR, pcie->non_mem.start);
+	regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_IN0_MEM_LIMIT, pcie->non_mem.end);
+	regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_POM0_MEM_ADDR, pcie->non_mem.start);
+
+	/* Set PCIeA mem1 region to be 2nd 16MB of the 64MB PCIeA window */
+	regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_IN1_MEM_ADDR, pcie->pre_mem.start);
+	regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_IN1_MEM_LIMIT, pcie->pre_mem.end);
+	regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_POM1_MEM_ADDR, pcie->pre_mem.start);
+
+	/* Set PCIeA io to be third 16M region of the 64MB PCIeA window*/
+	regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_IN_IO_ADDR, pcie->io.start);
+	regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_IN_IO_LIMIT, pcie->io.end);
+
+
+	/* Set PCIeA cgf0 to be last 16M region of the 64MB PCIeA window*/
+	regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_IN_CFG0_ADDR, pcie->cfg.start);
+	regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_IN_CFG0_LIMIT, pcie->cfg.end);
+	wmb();
+
+	/* Enable outbound address translation */
+	regmap_write_bits(pcie->sys_ctrl, pcie->pcie_ctrl_offset, PCIE_OBTRANS, PCIE_OBTRANS);
+	wmb();
+
+	/*
+	 * Program PCIe command register for core to:
+	 *  enable memory space
+	 *  enable bus master
+	 *  enable io
+	 */
+	writel_relaxed(7, pcie->base + PCI_CONFIG_COMMAND_STATUS);
+	/* which is which */
+	wmb();
+}
+
+static unsigned oxnas_pcie_cfg_to_offset(
+	struct pci_sys_data *sys,
+	unsigned char bus_number,
+	unsigned int devfn,
+	int where)
+{
+	unsigned int function = PCI_FUNC(devfn);
+	unsigned int slot = PCI_SLOT(devfn);
+	unsigned char bus_number_offset;
+
+	bus_number_offset = bus_number - sys->busnr;
+
+	/*
+	 * We'll assume for now that the offset, function, slot, bus encoding
+	 * should map onto linear, contiguous addresses in PCIe config space,
+	 * albeit that the majority will be unused as only slot 0 is valid for
+	 * any PCIe bus and most devices have only function 0
+	 *
+	 * Could be that PCIe in fact works by not encoding the slot number into
+	 * the config space address as it's known that only slot 0 is valid.
+	 * We'll have to experiment if/when we get a PCIe switch connected to
+	 * the PCIe host
+	 */
+	return (bus_number_offset << 20) | (slot << 15) | (function << 12) |
+		(where & ~3);
+}
+
+/* PCI configuration space write function */
+static int oxnas_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
+			      int where, int size, u32 val)
+{
+	unsigned long flags;
+	struct oxnas_pcie *pcie = sys_to_pcie(bus->sysdata);
+	unsigned offset;
+	u32 value;
+	u32 lanes;
+
+	/* Only a single device per bus for PCIe point-to-point links */
+	if (PCI_SLOT(devfn) > 0)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	if (!pcie->haslink)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	offset = oxnas_pcie_cfg_to_offset(bus->sysdata, bus->number, devfn,
+					  where);
+
+	value = val << (8 * (where & 3));
+	lanes = (0xf >> (4-size)) << (where & 3);
+	/* it race with mem and io write, but the possibility is low, normally
+	 * all config writes happens at driver initialize stage, wont interleave
+	 * with others.
+	 * and many pcie cards use dword (4bytes) access mem/io access only,
+	 * so not bother to copy that ugly work-around now. */
+	spin_lock_irqsave(&pcie->lock, flags);
+	set_out_lanes(pcie, lanes);
+	writel_relaxed(value, pcie->cfgbase + offset);
+	set_out_lanes(pcie, 0xf);
+	spin_unlock_irqrestore(&pcie->lock, flags);
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+/* PCI configuration space read function */
+static int oxnas_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
+			      int size, u32 *val)
+{
+	struct oxnas_pcie *pcie = sys_to_pcie(bus->sysdata);
+	unsigned offset;
+	u32 value;
+	u32 left_bytes, right_bytes;
+
+	/* Only a single device per bus for PCIe point-to-point links */
+	if (PCI_SLOT(devfn) > 0) {
+		*val = 0xffffffff;
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+	if (!pcie->haslink) {
+		*val = 0xffffffff;
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+	offset = oxnas_pcie_cfg_to_offset(bus->sysdata, bus->number, devfn,
+					  where);
+	value = readl_relaxed(pcie->cfgbase + offset);
+	left_bytes = where & 3;
+	right_bytes = 4 - left_bytes - size;
+	value <<= right_bytes * 8;
+	value >>= (left_bytes + right_bytes) * 8;
+	*val = value;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops oxnas_pcie_ops = {
+	.read = oxnas_pcie_rd_conf,
+	.write = oxnas_pcie_wr_conf,
+};
+
+static int oxnas_pcie_setup(int nr, struct pci_sys_data *sys)
+{
+	struct oxnas_pcie *pcie = sys_to_pcie(sys);
+
+	pci_add_resource_offset(&sys->resources, &pcie->non_mem, sys->mem_offset);
+	pci_add_resource_offset(&sys->resources, &pcie->pre_mem, sys->mem_offset);
+	pci_add_resource_offset(&sys->resources, &pcie->io, sys->io_offset);
+	pci_add_resource(&sys->resources, &pcie->busn);
+	if (sys->busnr == 0) { /* default one */
+		sys->busnr = pcie->busn.start;
+	}
+	/* do not use devm_ioremap_resource, it does not like cfg resource */
+	pcie->cfgbase = devm_ioremap(&pcie->pdev->dev, pcie->cfg.start,
+				     resource_size(&pcie->cfg));
+	if (!pcie->cfgbase)
+		return -ENOMEM;
+
+	oxnas_pcie_setup_hw(pcie);
+
+	return 1;
+}
+
+static void oxnas_pcie_enable(struct device *dev, struct oxnas_pcie *pcie)
+{
+	struct hw_pci hw;
+	int i;
+
+	memset(&hw, 0, sizeof(hw));
+	for (i = 0; i < NUM_CONTROLLERS; i++)
+		pcie->private_data[i] = pcie;
+
+	hw.nr_controllers = NUM_CONTROLLERS;
+/* I think use stack pointer is a bad idea though it is valid in this case */
+	hw.private_data   = pcie->private_data;
+	hw.setup          = oxnas_pcie_setup;
+	hw.map_irq        = of_irq_parse_and_map_pci;
+	hw.ops            = &oxnas_pcie_ops;
+
+	/* pass dev to maintain of tree, interrupt mapping rely on this */
+	pci_common_init_dev(dev, &hw);
+}
+
+static int oxnas_pcie_shared_init(struct platform_device *pdev, struct oxnas_pcie *pcie)
+{
+	if (++pcie_shared.refcount == 1) {
+		phy_init(pcie->phy);
+		phy_power_on(pcie->phy);
+		return 0;
+	} else {
+		return 0;
+	}
+}
+
+#if 0
+/* maybe we will call it when enter low power state */
+static void oxnas_pcie_shared_deinit(struct platform_device *pdev)
+{
+	if (--pcie_shared.refcount == 0) {
+		/* no cleanup needed */;
+	}
+}
+#endif
+
+static int
+oxnas_pcie_map_registers(struct platform_device *pdev,
+			 struct device_node *np,
+			 struct oxnas_pcie *pcie)
+{
+	struct resource regs;
+	int ret = 0;
+	u32 outbound_ctrl_offset;
+	u32 pcie_ctrl_offset;
+
+	ret = of_address_to_resource(np, 0, &regs);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to parse base register space\n");
+		return -EINVAL;
+	}
+
+	pcie->base = devm_ioremap_resource(&pdev->dev, &regs);
+	if (!pcie->base) {
+		dev_err(&pdev->dev, "failed to map base register space\n");
+		return -ENOMEM;
+	}
+
+	ret = of_address_to_resource(np, 1, &regs);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to parse inbound register space\n");
+		return -EINVAL;
+	}
+
+	pcie->inbound = devm_ioremap_resource(&pdev->dev, &regs);
+	if (!pcie->inbound) {
+		dev_err(&pdev->dev, "failed to map inbound register space\n");
+		return -ENOMEM;
+	}
+
+	pcie->phy = devm_of_phy_get(&pdev->dev, np, NULL);
+	if (IS_ERR(pcie->phy)) {
+		if (PTR_ERR(pcie->phy) == -EPROBE_DEFER) {
+			dev_err(&pdev->dev, "failed to probe phy\n");
+			return PTR_ERR(pcie->phy);
+		}
+		dev_warn(&pdev->dev, "phy not attached\n");
+		pcie->phy = NULL;
+	}
+
+	if (of_property_read_u32(np, "plxtech,pcie-outbound-offset",
+				 &outbound_ctrl_offset)) {
+		dev_err(&pdev->dev, "failed to parse outbound register offset\n");
+		return -EINVAL;
+	}
+	pcie->outbound_offset = outbound_ctrl_offset;
+
+	if (of_property_read_u32(np, "plxtech,pcie-ctrl-offset",
+				 &pcie_ctrl_offset)) {
+		dev_err(&pdev->dev, "failed to parse pcie-ctrl register offset\n");
+		return -EINVAL;
+	}
+	pcie->pcie_ctrl_offset = pcie_ctrl_offset;
+
+	return 0;
+}
+
+static int oxnas_pcie_init_res(struct platform_device *pdev,
+				      struct oxnas_pcie *pcie,
+				      struct device_node *np)
+{
+	struct of_pci_range range;
+	struct of_pci_range_parser parser;
+	int ret;
+
+	if (of_pci_range_parser_init(&parser, np))
+		return -EINVAL;
+
+	/* Get the I/O and memory ranges from DT */
+	for_each_of_pci_range(&parser, &range) {
+
+		unsigned long restype = range.flags & IORESOURCE_TYPE_BITS;
+		if (restype == IORESOURCE_IO) {
+			of_pci_range_to_resource(&range, np, &pcie->io);
+			pcie->io.name = "I/O";
+		}
+		if (restype == IORESOURCE_MEM) {
+			if (range.flags & IORESOURCE_PREFETCH) {
+				of_pci_range_to_resource(&range, np, &pcie->pre_mem);
+				pcie->pre_mem.name = "PRE MEM";
+			} else {
+				of_pci_range_to_resource(&range, np, &pcie->non_mem);
+				pcie->non_mem.name = "NON MEM";
+			}
+
+		}
+		if (restype == 0)
+			of_pci_range_to_resource(&range, np, &pcie->cfg);
+	}
+
+	/* Get the bus range */
+	ret = of_pci_parse_bus_range(np, &pcie->busn);
+
+	if (ret) {
+		dev_err(&pdev->dev, "failed to parse bus-range property: %d\n",
+			ret);
+		return ret;
+	}
+
+	pcie->card_reset = of_get_gpio(np, 0);
+	if (pcie->card_reset < 0)
+		dev_info(&pdev->dev, "card reset gpio pin not exists\n");
+
+	if (of_property_read_u32(np, "plxtech,pcie-hcsl-bit", &pcie->hcsl_en))
+		return -EINVAL;
+
+	pcie->clk = of_clk_get_by_name(np, "pcie");
+	if (IS_ERR(pcie->clk)) {
+		return PTR_ERR(pcie->clk);
+	}
+
+	pcie->busclk = of_clk_get_by_name(np, "busclk");
+	if (IS_ERR(pcie->busclk)) {
+		clk_put(pcie->clk);
+		return PTR_ERR(pcie->busclk);
+	}
+
+	return 0;
+}
+
+static void oxnas_pcie_init_hw(struct platform_device *pdev,
+			       struct oxnas_pcie *pcie)
+{
+	u32 version_id;
+	int ret;
+
+	clk_prepare_enable(pcie->busclk);
+
+	/* reset PCIe cards use hard-wired gpio pin */
+	if (pcie->card_reset >= 0 &&
+	    !gpio_direction_output(pcie->card_reset, 0)) {
+		wmb();
+		mdelay(10);
+		/* must tri-state the pin to pull it up */
+		gpio_direction_input(pcie->card_reset);
+		wmb();
+		mdelay(100);
+	}
+
+	/* ToDo: use phy power-on port... */
+	regmap_update_bits(pcie->sys_ctrl, SYS_CTRL_HCSL_CTRL_REGOFFSET,
+	                   BIT(pcie->hcsl_en), BIT(pcie->hcsl_en));
+
+	/* core */
+	ret = device_reset(&pdev->dev);
+	if (ret) {
+		dev_err(&pdev->dev, "core reset failed %d\n", ret);
+		return;
+	}
+
+	/* Start PCIe core clocks */
+	clk_prepare_enable(pcie->clk);
+
+	version_id = readl_relaxed(pcie->base + PCI_CONFIG_VERSION_DEVICEID);
+	dev_info(&pdev->dev, "PCIe version/deviceID 0x%x\n", version_id);
+
+	if (version_id != VERSION_ID_MAGIC) {
+		dev_info(&pdev->dev, "PCIe controller not found\n");
+		pcie->haslink = 0;
+		return;
+	}
+
+	/* allow entry to L23 state */
+	regmap_write_bits(pcie->sys_ctrl, pcie->pcie_ctrl_offset,
+	                  PCIE_READY_ENTR_L23, PCIE_READY_ENTR_L23);
+
+	/* Set PCIe core into RootCore mode */
+	regmap_write_bits(pcie->sys_ctrl, pcie->pcie_ctrl_offset,
+	                  PCIE_DEVICE_TYPE_MASK, PCIE_DEVICE_TYPE_ROOT);
+	wmb();
+
+	/* Bring up the PCI core */
+	regmap_write_bits(pcie->sys_ctrl, pcie->pcie_ctrl_offset,
+	                  PCIE_LTSSM, PCIE_LTSSM);
+	wmb();
+}
+
+static int oxnas_pcie_probe(struct platform_device *pdev)
+{
+	struct oxnas_pcie *pcie;
+	struct device_node *np = pdev->dev.of_node;
+	int ret;
+
+	pcie = devm_kzalloc(&pdev->dev, sizeof(struct oxnas_pcie),
+			    GFP_KERNEL);
+	if (!pcie)
+		return -ENOMEM;
+
+	pcie->pdev = pdev;
+	pcie->haslink = 1;
+	spin_lock_init(&pcie->lock);
+
+	pcie->sys_ctrl = syscon_regmap_lookup_by_compatible("oxsemi,ox820-sys-ctrl");
+	if (IS_ERR(pcie->sys_ctrl))
+		return PTR_ERR(pcie->sys_ctrl);
+
+	ret = oxnas_pcie_init_res(pdev, pcie, np);
+	if (ret)
+		return ret;
+	if (pcie->card_reset >= 0) {
+		ret = gpio_request_one(pcie->card_reset, GPIOF_DIR_IN,
+				       dev_name(&pdev->dev));
+		if (ret) {
+			dev_err(&pdev->dev, "cannot request gpio pin %d\n",
+				pcie->card_reset);
+			return ret;
+		}
+	}
+
+	ret = oxnas_pcie_map_registers(pdev, np, pcie);
+	if (ret) {
+		dev_err(&pdev->dev, "cannot map registers\n");
+		goto err_free_gpio;
+	}
+
+	ret = oxnas_pcie_shared_init(pdev, pcie);
+	if (ret)
+		goto err_free_gpio;
+
+	/* if hw not found, haslink cleared */
+	oxnas_pcie_init_hw(pdev, pcie);
+
+	if (pcie->haslink && oxnas_pcie_link_up(pcie)) {
+		pcie->haslink = 1;
+		dev_info(&pdev->dev, "link up\n");
+	} else {
+		pcie->haslink = 0;
+		dev_info(&pdev->dev, "link down\n");
+	}
+	/* should we register our controller even when pcie->haslink is 0 ? */
+	/* register the controller with framework */
+	oxnas_pcie_enable(&pdev->dev, pcie);
+
+	return 0;
+
+err_free_gpio:
+	if (pcie->card_reset)
+		gpio_free(pcie->card_reset);
+
+	return ret;
+}
+
+static const struct of_device_id oxnas_pcie_of_match_table[] = {
+	{ .compatible = "plxtech,nas782x-pcie", },
+	{},
+};
+
+static struct platform_driver oxnas_pcie_driver = {
+	.driver = {
+		.name = "oxnas-pcie",
+		.suppress_bind_attrs = true,
+		.of_match_table = oxnas_pcie_of_match_table,
+	},
+	.probe = oxnas_pcie_probe,
+};
+
+builtin_platform_driver(oxnas_pcie_driver);
diff --git a/target/linux/oxnas/files/drivers/phy/phy-oxnas-pcie.c b/target/linux/oxnas/files/drivers/phy/phy-oxnas-pcie.c
new file mode 100644
index 0000000000..6ded8b2cf6
--- /dev/null
+++ b/target/linux/oxnas/files/drivers/phy/phy-oxnas-pcie.c
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 Daniel Golle <daniel@makrotopia.org>
+ *
+ */
+
+#include <dt-bindings/phy/phy.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/mfd/syscon.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+#define ADDR_VAL(val)	((val) & 0xFFFF)
+#define DATA_VAL(val)	((val) & 0xFFFF)
+
+#define SYS_CTRL_HCSL_CTRL_REGOFFSET	0x114
+
+enum {
+	HCSL_BIAS_ON = BIT(0),
+	HCSL_PCIE_EN = BIT(1),
+	HCSL_PCIEA_EN = BIT(2),
+	HCSL_PCIEB_EN = BIT(3),
+};
+
+enum {
+	/* pcie phy reg offset */
+	PHY_ADDR = 0,
+	PHY_DATA = 4,
+	/* phy data reg bits */
+	READ_EN = BIT(16),
+	WRITE_EN = BIT(17),
+	CAP_DATA = BIT(18),
+};
+
+struct oxnas_pcie_phy {
+	struct device *dev;
+	void __iomem *membase;
+	const struct phy_ops *ops;
+	struct regmap *sys_ctrl;
+	struct reset_control *rstc;
+};
+
+static int oxnas_pcie_phy_init(struct phy *phy)
+{
+	struct oxnas_pcie_phy *pciephy = phy_get_drvdata(phy);
+	int ret;
+
+	/* generate clocks from HCSL buffers, shared parts */
+	regmap_write(pciephy->sys_ctrl, SYS_CTRL_HCSL_CTRL_REGOFFSET, HCSL_BIAS_ON|HCSL_PCIE_EN);
+
+	/* Ensure PCIe PHY is properly reset */
+	ret = reset_control_reset(pciephy->rstc);
+
+	if (ret) {
+		dev_err(pciephy->dev, "phy reset failed %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int oxnas_pcie_phy_power_on(struct phy *phy)
+{
+	struct oxnas_pcie_phy *pciephy = phy_get_drvdata(phy);
+
+	/* Enable PCIe Pre-Emphasis: What these value means? */
+	writel(ADDR_VAL(0x0014), pciephy->membase + PHY_ADDR);
+	writel(DATA_VAL(0xce10) | CAP_DATA, pciephy->membase + PHY_DATA);
+	writel(DATA_VAL(0xce10) | WRITE_EN, pciephy->membase + PHY_DATA);
+
+	writel(ADDR_VAL(0x2004), pciephy->membase + PHY_ADDR);
+	writel(DATA_VAL(0x82c7) | CAP_DATA, pciephy->membase + PHY_DATA);
+	writel(DATA_VAL(0x82c7) | WRITE_EN, pciephy->membase + PHY_DATA);
+
+	return 0;
+}
+
+static const struct phy_ops ops = {
+	.init           = oxnas_pcie_phy_init,
+	.power_on       = oxnas_pcie_phy_power_on,
+	.owner          = THIS_MODULE,
+};
+
+static int oxnas_pcie_phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = pdev->dev.of_node;
+	struct phy *generic_phy;
+	struct phy_provider *phy_provider;
+	struct oxnas_pcie_phy *pciephy;
+	struct regmap *sys_ctrl;
+	struct reset_control *rstc;
+	void __iomem *membase;
+
+	membase = of_iomap(np, 0);
+	if (IS_ERR(membase))
+		return PTR_ERR(membase);
+
+	sys_ctrl = syscon_regmap_lookup_by_compatible("oxsemi,ox820-sys-ctrl");
+	if (IS_ERR(sys_ctrl))
+		return PTR_ERR(sys_ctrl);
+
+	rstc = devm_reset_control_get_shared(dev, "phy");
+	if (IS_ERR(rstc))
+		return PTR_ERR(rstc);
+
+	pciephy = devm_kzalloc(dev, sizeof(*pciephy), GFP_KERNEL);
+	if (!pciephy)
+		return -ENOMEM;
+
+	pciephy->sys_ctrl = sys_ctrl;
+	pciephy->rstc = rstc;
+	pciephy->membase = membase;
+	pciephy->dev = dev;
+	pciephy->ops = &ops;
+
+	generic_phy = devm_phy_create(dev, dev->of_node, pciephy->ops);
+	if (IS_ERR(generic_phy)) {
+		dev_err(dev, "failed to create PHY\n");
+		return PTR_ERR(generic_phy);
+	}
+
+	phy_set_drvdata(generic_phy, pciephy);
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id oxnas_pcie_phy_id_table[] = {
+	{ .compatible = "oxsemi,ox820-pcie-phy" },
+	{ },
+};
+
+static struct platform_driver oxnas_pcie_phy_driver = {
+	.probe		= oxnas_pcie_phy_probe,
+	.driver		= {
+		.name		= "ox820-pcie-phy",
+		.of_match_table	= oxnas_pcie_phy_id_table,
+	},
+};
+
+builtin_platform_driver(oxnas_pcie_phy_driver);