diff options
| author | Alexander Couzens <lynxis@fe80.eu> | 2021-06-01 21:09:26 +0000 |
|---|---|---|
| committer | Alexander Couzens <lynxis@fe80.eu> | 2021-09-21 14:08:51 +0200 |
| commit | 7f7bf36ec5bacbf414615d3cde009be548a86ae0 (patch) | |
| tree | 25c518c20c209dbb5b96be9051b0050097586a46 /target/linux/mpc85xx | |
| parent | a44fd27070e9fbd41dfa25585520f4b8937471cf (diff) | |
| download | upstream-7f7bf36ec5bacbf414615d3cde009be548a86ae0.tar.gz upstream-7f7bf36ec5bacbf414615d3cde009be548a86ae0.tar.bz2 upstream-7f7bf36ec5bacbf414615d3cde009be548a86ae0.zip | |
ramips: add support for minew g1-c
The minew g1-c is a smart home gateway / BLE gateway.
A Nordic nRF52832 is available via USB UART (cp210x) to support BLE.
The LED ring is a ring of 24x ws2812b connect to a generic GPIO (unsupported).
There is a small LED which is only visible when the device is open which
will be used as LED until the ws2812b is supported.
The board has also a micro sdcard/tfcard slot (untested).
The Nordic nRF52832 exposes SWD over a 5pin header (GND, VCC, SWD, SWC, RST).
The vendor uses an older OpenWrt version, sysupgrade can be used via
serial or ssh.
CPU: MT7628AN / 580MHz
RAM: DDR2 128 MiB RAM
Flash: SPI NOR 16 MiB W25Q128
Ethernet: 1x 100 mbit (Port 0) (PoE in)
USB: USB hub, 2x external, 1x internal to USB UART
Power: via micro usb or PoE 802.11af
UART: 3.3V, 115200 8n1
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Diffstat (limited to 'target/linux/mpc85xx')
0 files changed, 0 insertions, 0 deletions