diff options
author | Willem van den Akker <wvdakker@wilsoft.nl> | 2020-07-09 14:51:19 +0200 |
---|---|---|
committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-07-10 10:06:34 +0200 |
commit | 0df71e01cfe67516df63df025eb88a4d5d40f230 (patch) | |
tree | 0210a1b219adea0f64808490c9f8d485af2ef9ab /target/linux/lantiq/files-4.19 | |
parent | f632747704f172e5c6d3a7c5715dc8d2f50d8da8 (diff) | |
download | upstream-0df71e01cfe67516df63df025eb88a4d5d40f230.tar.gz upstream-0df71e01cfe67516df63df025eb88a4d5d40f230.tar.bz2 upstream-0df71e01cfe67516df63df025eb88a4d5d40f230.zip |
lantiq: set correct gphy pins for Zyxel P-2812
This fixes the gphy LED pins for Zyxel P-2812 devices. The have
been accidentally altered during a tidy-up operation (see Fixes:
below).
No ports were available, dmesg reported:
[ 0.658577] pinctrl-xway 1e100b10.pinmux: pin io5 already requested by
1e100bb0.stp; cannot claim for 1e108000.eth
[ 0.667566] pinctrl-xway 1e100b10.pinmux: pin-5 (1e108000.eth) status -22
[ 0.685238] lantiq,xrx200-net 1e108000.eth: Error applying setting,
reverse things back
[ 0.693270] lantiq,xrx200-net: probe of 1e108000.eth failed with error -22
Fixes: FS#3188
Fixes: 660200e53d62 ("lantiq: dts: assign the GPHY LED pins to the
Ethernet controller node")
Suggested-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: Willem van den Akker <wvdakker@wilsoft.nl>
[commit message facelift]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/lantiq/files-4.19')
-rw-r--r-- | target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-fx.dtsi | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-fx.dtsi b/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-fx.dtsi index 5f8392ca44..6c30a91553 100644 --- a/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-fx.dtsi +++ b/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-fx.dtsi @@ -112,7 +112,7 @@ ð0 { pinctrl-0 = <&mdio_pins>, - <&gphy0_led0_pins>, <&gphy0_led2_pins>, + <&gphy0_led1_pins>, <&gphy0_led2_pins>, <&gphy1_led1_pins>, <&gphy1_led2_pins>; pinctrl-names = "default"; |