diff options
| author | Danijel Tudek <danijel.tudek@gmail.com> | 2019-02-12 18:11:09 +0100 |
|---|---|---|
| committer | Hauke Mehrtens <hauke@hauke-m.de> | 2019-03-10 16:49:31 +0100 |
| commit | eae6cac6a30b95bef04d033ed8a303b7e35a078b (patch) | |
| tree | ef239887d57928b1366f714737b5fc3f92472bd2 /target/linux/lantiq/base-files/etc | |
| parent | 5026f4355953e6af66326c10822e9a6e937baaea (diff) | |
| download | upstream-eae6cac6a30b95bef04d033ed8a303b7e35a078b.tar.gz upstream-eae6cac6a30b95bef04d033ed8a303b7e35a078b.tar.bz2 upstream-eae6cac6a30b95bef04d033ed8a303b7e35a078b.zip | |
lantiq: add support for AVM FRITZ!Box 7362 SL
Hardware:
- SoC: Lantiq VRX288
- RAM: Winbond W971GG6JB 1 Gb (128 MiB)
- Flash:
- SPI: 8 Mb (1 MiB) for bootloader and tffs
- NAND: 1 Gb (128 MiB) for OS
- xDSL: Lantiq VRX208
- WLAN: Atheros AR9381
- DECT: Dialog Semiconductors SC14441
Everything except FXS/DECT works
(no drivers for AVM's FXS implementation with SC14441).
Installation via FTP:
1. Use scripts/flashing/eva_ramboot.py to send initramfs-kernel.bin
to the device when powering on.
Standard AVM procedures with finding the correct IP address and
the right moment to open FTP apply here (approx. 4 seconds on 7362SL).
IMPORTANT: set lzma compression in ramdisk options, bootloader stalls
when receiving uncompressed images.
2. Transfer sysupgrade.bin image with scp to /tmp directory
and run sysupgrade
3. First boot might take a bit longer if linux_fs_start was set to 1,
in that case the device will reboot twice, first time it will fail to load
second kernel (overwritten by ubifs), set linux_fs_start to 0 and reboot.
OpenWrt uses the entire NAND flash. Kernel uses 4 MiB and rootfs uses
the rest of 124 MiB, overwriting everything related to FRITZ!OS - both
OS images, config and answering machine/media server data.
To return to FRITZ!OS, use AVM's recovery image.
Signed-off-by: Danijel Tudek <danijel.tudek@gmail.com>
Diffstat (limited to 'target/linux/lantiq/base-files/etc')
| -rwxr-xr-x | target/linux/lantiq/base-files/etc/board.d/02_network | 8 | ||||
| -rw-r--r-- | target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom | 3 |
2 files changed, 10 insertions, 1 deletions
diff --git a/target/linux/lantiq/base-files/etc/board.d/02_network b/target/linux/lantiq/base-files/etc/board.d/02_network index b7d23da53d..c79fb2d136 100755 --- a/target/linux/lantiq/base-files/etc/board.d/02_network +++ b/target/linux/lantiq/base-files/etc/board.d/02_network @@ -158,6 +158,14 @@ avm,fritz7360sl) "0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0" ;; +avm,fritz7362sl) + annex="b" + lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)")) + wan_mac=$(fritz_tffs -n macdsl -i $(find_mtd_part "tffs (1)")) + ucidef_add_switch "switch0" \ + "0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0" + ;; + avm,fritz7412) tffsdev=$(find_mtd_chardev "nand-tffs") annex="b" diff --git a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom index 26b3dd0420..6ae5e3cfe9 100644 --- a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom +++ b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom @@ -157,7 +157,8 @@ case "$FIRMWARE" in ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_ascii uboot-env ethaddr) +2) 524 ;; avm,fritz3370-rev2-hynix|\ - avm,fritz3370-rev2-micron) + avm,fritz3370-rev2-micron|\ + avm,fritz7362sl) ath9k_eeprom_extract_reverse "urlader" 5441 1088 ;; avm,fritz7312|avm,fritz7320|avm,fritz7360sl) |