ipq806x: update bleeding-edge kernel from 4.0 to 4.1

Default kernel doesn't change and stays on 3.18 for now.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 46554

1 files changed, 105 insertions, 0 deletions

diff --git a/target/linux/ipq806x/patches-4.1/701-stmmac-add-phy-handle-support-to-the-platform-layer.patch b/target/linux/ipq806x/patches-4.1/701-stmmac-add-phy-handle-support-to-the-platform-layer.patch
new file mode 100644
index 0000000000..3711e1282b
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.1/701-stmmac-add-phy-handle-support-to-the-platform-layer.patch
@@ -0,0 +1,105 @@
+From 4f09499bc1d9bb095caccbcd73ff951ee631e521 Mon Sep 17 00:00:00 2001
+From: Mathieu Olivari <mathieu@codeaurora.org>
+Date: Fri, 8 May 2015 15:42:40 -0700
+Subject: [PATCH 1/8] stmmac: add phy-handle support to the platform layer
+
+On stmmac driver, PHY specification in device-tree was done using the
+non-standard property "snps,phy-addr". Specifying a PHY on a different
+MDIO bus that the one within the stmmac controller doesn't seem to be
+possible when device-tree is used.
+
+This change adds support for the phy-handle property, as specified in
+Documentation/devicetree/bindings/net/ethernet.txt.
+
+Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
+---
+ drivers/net/ethernet/stmicro/stmmac/stmmac_main.c  | 28 ++++++++++++++--------
+ .../net/ethernet/stmicro/stmmac/stmmac_platform.c  |  6 ++++-
+ include/linux/stmmac.h                             |  1 +
+ 3 files changed, 24 insertions(+), 11 deletions(-)
+
+--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
++++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+@@ -52,6 +52,7 @@
+ #include "stmmac_ptp.h"
+ #include "stmmac.h"
+ #include <linux/reset.h>
++#include <linux/of_mdio.h>
+ 
+ #define STMMAC_ALIGN(x)	L1_CACHE_ALIGN(x)
+ 
+@@ -816,18 +817,25 @@ static int stmmac_init_phy(struct net_de
+ 	priv->speed = 0;
+ 	priv->oldduplex = -1;
+ 
+-	if (priv->plat->phy_bus_name)
+-		snprintf(bus_id, MII_BUS_ID_SIZE, "%s-%x",
+-			 priv->plat->phy_bus_name, priv->plat->bus_id);
+-	else
+-		snprintf(bus_id, MII_BUS_ID_SIZE, "stmmac-%x",
+-			 priv->plat->bus_id);
+-
+-	snprintf(phy_id_fmt, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id,
+-		 priv->plat->phy_addr);
+-	pr_debug("stmmac_init_phy:  trying to attach to %s\n", phy_id_fmt);
++	if (priv->plat->phy_node) {
++		phydev = of_phy_connect(dev, priv->plat->phy_node,
++					&stmmac_adjust_link, 0, interface);
++	} else {
++		if (priv->plat->phy_bus_name)
++			snprintf(bus_id, MII_BUS_ID_SIZE, "%s-%x",
++				 priv->plat->phy_bus_name, priv->plat->bus_id);
++		else
++			snprintf(bus_id, MII_BUS_ID_SIZE, "stmmac-%x",
++				 priv->plat->bus_id);
++
++		snprintf(phy_id_fmt, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id,
++			 priv->plat->phy_addr);
++		pr_debug("stmmac_init_phy:  trying to attach to %s\n",
++			 phy_id_fmt);
+ 
+-	phydev = phy_connect(dev, phy_id_fmt, &stmmac_adjust_link, interface);
++		phydev = phy_connect(dev, phy_id_fmt, &stmmac_adjust_link,
++				     interface);
++	}
+ 
+ 	if (IS_ERR(phydev)) {
+ 		pr_err("%s: Could not attach to PHY\n", dev->name);
+--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
++++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+@@ -28,6 +28,7 @@
+ #include <linux/of.h>
+ #include <linux/of_net.h>
+ #include <linux/of_device.h>
++#include <linux/of_mdio.h>
+ 
+ #include "stmmac.h"
+ #include "stmmac_platform.h"
+@@ -168,13 +169,16 @@ static int stmmac_probe_config_dt(struct
+ 	/* Default to phy auto-detection */
+ 	plat->phy_addr = -1;
+ 
++	/* If we find a phy-handle property, use it as the PHY */
++	plat->phy_node = of_parse_phandle(np, "phy-handle", 0);
++
+ 	/* "snps,phy-addr" is not a standard property. Mark it as deprecated
+ 	 * and warn of its use. Remove this when phy node support is added.
+ 	 */
+ 	if (of_property_read_u32(np, "snps,phy-addr", &plat->phy_addr) == 0)
+ 		dev_warn(&pdev->dev, "snps,phy-addr property is deprecated\n");
+ 
+-	if (plat->phy_bus_name)
++	if (plat->phy_node || plat->phy_bus_name)
+ 		plat->mdio_bus_data = NULL;
+ 	else
+ 		plat->mdio_bus_data =
+--- a/include/linux/stmmac.h
++++ b/include/linux/stmmac.h
+@@ -99,6 +99,7 @@ struct plat_stmmacenet_data {
+ 	int phy_addr;
+ 	int interface;
+ 	struct stmmac_mdio_bus_data *mdio_bus_data;
++	struct device_node *phy_node;
+ 	struct stmmac_dma_cfg *dma_cfg;
+ 	int clk_csr;
+ 	int has_gmac;