ipq40xx: consolidate DTS files

The DTS files in files-4.19 and files-5.4 are exactly identical
except for one file (qcom-ipq4018-emr3500.dts), which is only
present for 5.4.

Since there is no point in maintaining all these identical files
twice, this patch moves them to the "files" directory.

If there ever was a new kernel with substantial DTS changes, a
new folder would need to be introduced anyway and could easily be
done.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

87 files changed, 0 insertions, 10517 deletions

diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-a42.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-a42.dts
deleted file mode 100644
index 33c44a8097..0000000000
--- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-a42.dts
+++ /dev/null
@@ -1,219 +0,0 @@
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- * Copyright (c) 2017, Sven Eckelmann <sven.eckelmann@openmesh.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "OpenMesh A42";
-	compatible = "openmesh,a42";
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@194b000 {
-			/* select hostmode */
-			compatible = "qcom,tcsr";
-			reg = <0x194b000 0x100>;
-			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		usb2: usb2@60f8800 {
-			status = "okay";
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	aliases {
-		led-boot = &power;
-		led-failsafe = &power;
-		led-running = &power;
-		led-upgrade = &power;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		red {
-			label = "a42:red:status";
-			gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
-		};
-
-		power: green {
-			label = "a42:green:status";
-			gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
-		};
-
-		blue {
-			label = "a42:blue:status";
-			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
-		};
-	};
-
-	watchdog {
-		compatible = "linux,wdt-gpio";
-		gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
-		hw_algo = "toggle";
-		/* hw_margin_ms is actually 300s but driver limits it to 60s */
-		hw_margin_ms = <60000>;
-		always-running;
-	};
-};
-
-&tlmm {
-	serial_pins: serial_pinmux {
-		mux {
-			pins = "gpio60", "gpio61";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	spi_0_pins: spi_0_pinmux {
-		pin {
-			function = "blsp_spi0";
-			pins = "gpio55", "gpio56", "gpio57";
-			drive-strength = <12>;
-			bias-disable;
-		};
-		pin_cs {
-			function = "gpio";
-			pins = "gpio54";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&blsp1_spi1 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
-	m25p80@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-		/* partitions are passed via bootloader */
-	};
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&gmac0 {
-	qcom,phy_mdio_addr = <4>;
-	qcom,poll_required = <1>;
-	qcom,forced_speed = <1000>;
-	qcom,forced_duplex = <1>;
-	vlan_tag = <2 0x20>;
-};
-
-&gmac1 {
-	qcom,phy_mdio_addr = <3>;
-	qcom,poll_required = <1>;
-	qcom,forced_speed = <1000>;
-	qcom,forced_duplex = <1>;
-	vlan_tag = <1 0x10>;
-};
-
-&usb2_hs_phy {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "OM-A42";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "OM-A42";
-};
diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
deleted file mode 100644
index e21c40cae0..0000000000
--- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
+++ /dev/null
@@ -1,348 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "ALFA Network AP120C-AC";
-	compatible = "alfa-network,ap120c-ac";
-
-	aliases {
-		led-boot = &status;
-		led-failsafe = &status;
-		led-running = &status;
-		led-upgrade = &status;
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		status: status {
-			label = "ap120c-ac:blue:status";
-			gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-
-		wan {
-			label = "ap120c-ac:amber:wan";
-			gpios = <&qca8075 19 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan2g {
-			label = "ap120c-ac:green:wlan2g";
-			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "phy0tpt";
-		};
-
-		wlan5g {
-			label = "ap120c-ac:red:wlan5g";
-			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "phy1tpt";
-		};
-	};
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-
-			pinctrl-0 = <&mdio_pins>;
-			pinctrl-names = "default";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		counter@4a1000 {
-			compatible = "qcom,qca-gcnt";
-			reg = <0x4a1000 0x4>;
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		tcsr@194b000 {
-			compatible = "qcom,tcsr";
-			reg = <0x194b000 0x100>;
-			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		usb2@60f8800 {
-			status = "okay";
-		};
-
-		usb3@8af8800 {
-			status = "okay";
-
-			dwc3@8a00000 {
-				phys = <&usb3_hs_phy>;
-				phy-names = "usb2-phy";
-			};
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		qca8075: ess-switch@c000000 {
-			status = "okay";
-
-			switch_lan_bmp = <0x10>;
-			switch_wan_bmp = <0x20>;
-
-			#gpio-cells = <2>;
-			gpio-controller;
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-	};
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&blsp1_i2c3 {
-	status = "okay";
-
-	pinctrl-0 = <&i2c0_pins>;
-	pinctrl-names = "default";
-
-	tpm@29 {
-		compatible = "atmel,at97sc3204t";
-		reg = <0x29>;
-	};
-};
-
-&blsp1_spi1 {
-	status = "okay";
-
-	pinctrl-0 = <&spi0_pins>;
-	pinctrl-names = "default";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
-		   <&tlmm  4 GPIO_ACTIVE_HIGH>;
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "SBL1";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-
-			partition@40000 {
-				label = "MIBIB";
-				reg = <0x00040000 0x00020000>;
-				read-only;
-			};
-
-			partition@60000 {
-				label = "QSEE";
-				reg = <0x00060000 0x00060000>;
-				read-only;
-			};
-
-			partition@c0000 {
-				label = "CDT";
-				reg = <0x000c0000 0x00010000>;
-				read-only;
-			};
-
-			partition@d0000 {
-				label = "DDRPARAMS";
-				reg = <0x000d0000 0x00010000>;
-				read-only;
-			};
-
-			partition@e0000 {
-				label = "APPSBLENV";
-				reg = <0x000e0000 0x00010000>;
-			};
-
-			partition@f0000 {
-				label = "APPSBL";
-				reg = <0x000f0000 0x00080000>;
-				read-only;
-			};
-
-			partition@170000 {
-				label = "ART";
-				reg = <0x00170000 0x00010000>;
-				read-only;
-			};
-
-			partition@180000 {
-				label = "priv_data1";
-				reg = <0x00180000 0x00010000>;
-				read-only;
-			};
-
-			partition@190000 {
-				label = "priv_data2";
-				reg = <0x00190000 0x00010000>;
-				read-only;
-			};
-		};
-	};
-
-	nand@1 {
-		compatible = "spi-nand";
-		reg = <1>;
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "rootfs1";
-				reg = <0x00000000 0x04000000>;
-			};
-
-			partition@4000000 {
-				label = "rootfs2";
-				reg = <0x04000000 0x04000000>;
-			};
-		};
-	};
-};
-
-&blsp1_uart1 {
-	status = "okay";
-
-	pinctrl-0 = <&serial0_pins>;
-	pinctrl-names = "default";
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&gmac0 {
-	qcom,forced_duplex = <1>;
-	qcom,forced_speed = <1000>;
-	qcom,phy_mdio_addr = <3>;
-	qcom,poll_required = <1>;
-	vlan_tag = <1 0x10>;
-};
-
-&gmac1 {
-	qcom,forced_duplex = <1>;
-	qcom,forced_speed = <1000>;
-	qcom,phy_mdio_addr = <4>;
-	qcom,poll_required = <1>;
-	vlan_tag = <2 0x20>;
-};
-
-&tlmm {
-	i2c0_pins: i2c0_pinmux {
-		mux_i2c {
-			function = "blsp_i2c0";
-			pins = "gpio58", "gpio59";
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-
-	mdio_pins: mdio_pinmux {
-		mux_mdio {
-			pins = "gpio53";
-			function = "mdio";
-			bias-pull-up;
-		};
-
-		mux_mdc {
-			pins = "gpio52";
-			function = "mdc";
-			bias-pull-up;
-		};
-	};
-
-	serial0_pins: serial0_pinmux {
-		mux_uart {
-			pins = "gpio60", "gpio61";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	spi0_pins: spi0_pinmux {
-		mux_spi {
-			function = "blsp_spi0";
-			pins = "gpio55", "gpio56", "gpio57";
-			drive-strength = <12>;
-			bias-disable;
-		};
-
-		mux_cs {
-			function = "gpio";
-			pins = "gpio54", "gpio4";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-};
-
-&usb2_hs_phy {
-	status = "okay";
-};
-
-&usb3_hs_phy {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "ALFA-Network-AP120C-AC";
-};
diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-cs-w3-wd1200g-eup.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-cs-w3-wd1200g-eup.dts
deleted file mode 100644
index d8b9e7ef13..0000000000
--- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-cs-w3-wd1200g-eup.dts
+++ /dev/null
@@ -1,242 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "EZVIZ CS-W3-WD1200G EUP";
-	compatible = "ezviz,cs-w3-wd1200g-eup";
-
-	aliases {
-		led-boot = &led_status_green;
-		led-failsafe = &led_status_red;
-		led-running = &led_status_blue;
-		led-upgrade = &led_status_green;
-	};
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-			pinctrl-0 = <&mdio_pins>;
-			pinctrl-names = "default";
-			reset-gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
-			reset-delay-us = <5000>;
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		tcsr@194b000 {
-			compatible = "qcom,tcsr";
-			reg = <0x194b000 0x100>;
-			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led_status_red: status_red {
-			label = "cs-w3-wd1200g-eup:red:status";
-			gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
-		};
-
-		led_status_green: status_green {
-			label = "cs-w3-wd1200g-eup:green:status";
-			gpios = <&tlmm 3 GPIO_ACTIVE_LOW>;
-		};
-
-		led_status_blue: status_blue {
-			label = "cs-w3-wd1200g-eup:blue:status";
-			gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-};
-
-&tlmm {
-	serial_pins: serial_pinmux {
-		mux {
-			pins = "gpio60", "gpio61";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	mdio_pins: mdio_pinmux {
-		mux_1 {
-			pins = "gpio53";
-			function = "mdio";
-			bias-pull-up;
-		};
-
-		mux_2 {
-			pins = "gpio52";
-			function = "mdc";
-			bias-pull-up;
-		};
-	};
-
-	spi_0_pins: spi_0_pinmux {
-		pin {
-			function = "blsp_spi0";
-			pins = "gpio55", "gpio56", "gpio57";
-			drive-strength = <12>;
-			bias-disable;
-		};
-		pin_cs {
-			function = "gpio";
-			pins = "gpio54";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&blsp1_spi1 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition0@0 {
-				label = "SBL1";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-
-			partition1@40000 {
-				label = "MIBIB";
-				reg = <0x00040000 0x00020000>;
-				read-only;
-			};
-
-			partition2@60000 {
-				label = "QSEE";
-				reg = <0x00060000 0x00060000>;
-				read-only;
-			};
-
-			partition3@c0000 {
-				label = "CDT";
-				reg = <0x000c0000 0x00010000>;
-				read-only;
-			};
-
-			partition4@d0000 {
-				label = "DDRPARAMS";
-				reg = <0x000d0000 0x00010000>;
-				read-only;
-			};
-
-			partition5@E0000 {
-				label = "APPSBLENV";
-				reg = <0x000e0000 0x00010000>;
-				read-only;
-			};
-
-			partition6@F0000 {
-				label = "APPSBL";
-				reg = <0x000f0000 0x00080000>;
-				read-only;
-			};
-
-			partition7@170000 {
-				label = "ART";
-				reg = <0x00170000 0x00010000>;
-				read-only;
-			};
-
-			partition9@580000 {
-				compatible = "denx,fit";
-				label = "firmware";
-				reg = <0x00180000 0x00e80000>;
-			};
-		};
-	};
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "ezviz-cs-w3-wd1200g-eup";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "ezviz-cs-w3-wd1200g-eup";
-};
diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts
deleted file mode 100644
index 17d9215544..0000000000
--- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts
+++ /dev/null
@@ -1,241 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "D-Link DAP 2610";
-	compatible = "dlink,dap-2610";
-
-	aliases {
-		led-boot = &led_red;
-		led-failsafe = &led_red;
-		led-running = &led_green;
-		led-upgrade = &led_red;
-	};
-
-	soc {
-		edma@c080000 {
-			qcom,num_gmac = <1>;
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		rng@22000 {
-			status = "okay";
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-			switch_lan_bmp = <0x20>;
-			switch_wan_bmp = <0x00>;
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led_red: red {
-			label = "dap-2610:red:power";
-			gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
-		};
-
-		led_green: green {
-			label = "dap-2610:green:power";
-			gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-};
-
-&blsp1_spi1 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fixed-partitions";
-
-			partition@0 {
-				label = "SBL1";
-				reg = <0x0 0x40000>;
-				read-only;
-			};
-			partition@40000 {
-				label = "MIBIB";
-				reg = <0x40000 0x20000>;
-				read-only;
-			};
-			partition@60000 {
-				label = "QSEE";
-				reg = <0x60000 0x60000>;
-				read-only;
-			};
-			partition@c0000 {
-				label = "CDT";
-				reg = <0xc0000 0x10000>;
-				read-only;
-			};
-			partition@d0000 {
-				label = "DDRPARAMS";
-				reg = <0xd0000 0x10000>;
-				read-only;
-			};
-			partition@e0000 {
-				label = "APPSBLENV";
-				reg = <0xe0000 0x10000>;
-				read-only;
-			};
-			partition@f0000 {
-				label = "APPSBL";
-				reg = <0xf0000 0x80000>;
-				read-only;
-			};
-			partition@170000 {
-				label = "ART";
-				reg = <0x170000 0x10000>;
-				read-only;
-			};
-			partition@180000 {
-				compatible = "wrg";
-				label = "firmware";
-				reg = <0x180000 0xdc0000>;
-			};
-			partition@fb0000 {
-				label = "rgbd";
-				reg = <0xfb0000 0x10000>;
-				read-only;
-			};
-			partition@fc0000 {
-				label = "bdcfg";
-				reg = <0xfc0000 0x10000>;
-				read-only;
-			};
-			partition@fd0000 {
-				label = "langpack";
-				reg = <0xfd0000 0x20000>;
-				read-only;
-			};
-			partition@ff0000 {
-				label = "certificate";
-				reg = <0xff0000 0x10000>;
-				read-only;
-			};
-			partition@f40000 {
-				label = "captival";
-				reg = <0xf40000 0x70000>;
-				read-only;
-			};
-		};
-	};
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&gmac0 {
-	qcom,phy_mdio_addr = <4>;
-	qcom,poll_required = <1>;
-	qcom,forced_speed = <1000>;
-	qcom,forced_duplex = <1>;
-	vlan_tag = <1 0x20>;
-};
-
-&mdio {
-	status = "okay";
-};
-
-&tlmm {
-	serial_pins: serial_pinmux {
-		mux {
-			pins = "gpio60", "gpio61";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	spi_0_pins: spi_0_pinmux {
-		mux {
-			function = "blsp_spi0";
-			pins = "gpio55", "gpio56", "gpio57";
-			drive-strength = <12>;
-			bias-disable;
-		};
-		mux_cs {
-			function = "gpio";
-			pins = "gpio54";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "dlink,dap-2610";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "dlink,dap-2610";
-};
diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts
deleted file mode 100644
index 2f9a890485..0000000000
--- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts
+++ /dev/null
@@ -1,277 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "Linksys EA6350v3";
-	compatible = "linksys,ea6350v3";
-
-	aliases {
-		led-boot = &power;
-		led-failsafe = &power;
-		led-running = &power;
-		led-upgrade = &power;
-	};
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		tcsr@194b000 {
-			compatible = "qcom,tcsr";
-			reg = <0x194b000 0x100>;
-			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		usb2@60f8800 {
-			status = "okay";
-		};
-
-		usb3@8af8800 {
-			status = "okay";
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		power: status {
-			label = "EA6350v3:green:status";
-			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "linksys-ea6350v3";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "linksys-ea6350v3";
-};
-
-
-&blsp_dma {
-	status = "okay";
-};
-
-&tlmm {
-	serial_pins: serial_pinmux {
-		mux {
-			pins = "gpio60", "gpio61";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	spi_0_pins: spi_0_pinmux {
-		mux {
-			function = "blsp_spi0";
-			pins = "gpio55", "gpio56", "gpio57";
-			drive-strength = <12>;
-			bias-disable;
-		};
-
-		mux_cs {
-			function = "gpio";
-			pins = "gpio54", "gpio59";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-};
-
-&blsp1_spi1 { /* BLSP1 QUP1 */
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
-		   <&tlmm 59 GPIO_ACTIVE_HIGH>;
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			SBL1@0 {
-				label = "SBL1";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			MBIB@40000 {
-				label = "MIBIB";
-				reg = <0x00040000 0x00020000>;
-				read-only;
-			};
-			QSEE@60000 {
-				label = "QSEE";
-				reg = <0x00060000 0x00060000>;
-				read-only;
-			};
-			CDT@c0000 {
-				label = "CDT";
-				reg = <0x000c0000 0x00010000>;
-				read-only;
-			};
-			APPSBLENV@d0000 {
-				label = "APPSBLENV";
-				reg = <0x000d0000 0x00010000>;
-				read-only;
-			};
-			APPSBL@e0000 {
-				label = "APPSBL"; /* uboot */
-				reg = <0x000e0000 0x00080000>;
-				read-only;
-			};
-			ART@160000 {
-				label = "ART";
-				reg = <0x00160000 0x00010000>;
-				read-only;
-			};
-			u_env@170000 {
-				label = "u_env";
-				reg = <0x00170000 0x00020000>;
-			};
-			s_env@190000 {
-				label = "s_env";
-				reg = <0x00190000 0x00020000>;
-			};
-			devinfo@1b0000 {
-				label = "devinfo";
-				reg = <0x001b0000 0x00010000>;
-			};
-			/* 0x001c0000 - 0x00200000 unused */
-		};
-	};
-
-	flash@1 {
-		status = "okay";
-		compatible = "spi-nand";
-		reg = <1>;
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			kernel@0 {
-				label = "kernel";
-				reg = <0x00000000 0x02800000>;
-			};
-			rootfs@300000 {
-				label = "rootfs";
-				reg = <0x00300000 0x02500000>;
-			};
-			alt_kernel@2800000 {
-				label = "alt_kernel";
-				reg = <0x02800000 0x02800000>;
-			};
-			alt_rootfs@2b00000 {
-				label = "alt_rootfs";
-				reg = <0x02b00000 0x02500000>;
-			};
-			sysdiag@5000000 {
-				label = "sysdiag";
-				reg = <0x05000000 0x00100000>;
-			};
-			syscfg@5100000 {
-				label = "syscfg";
-				reg = <0x05100000 0x02F00000>;
-			};
-			/* 0x00000000 - 0x08000000: 128 MiB */
-		};
-	};
-};
-
-&usb3_ss_phy {
-	status = "okay";
-};
-
-&usb3_hs_phy {
-	status = "okay";
-};
-
-&usb2_hs_phy {
-	status = "okay";
-};
diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts
deleted file mode 100644
index 32fded4c0e..0000000000
--- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts
+++ /dev/null
@@ -1,235 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "EnGenius EAP1300";
-	compatible = "engenius,eap1300";
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	aliases {
-		led-boot = &power;
-		led-failsafe = &power;
-		led-running = &power;
-		led-upgrade = &power;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		power: orange {
-			label = "eap1300:orange:power";
-			gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
-		};
-
-		lan {
-			label = "eap1300:blue:lan";
-			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
-		};
-
-		mesh {
-			label = "eap1300:blue:mesh";
-			gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan2g {
-			label = "eap1300:blue:wlan2g";
-			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan5g {
-			label = "eap1300:yellow:wlan5g";
-			gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&tlmm {
-	serial_pins: serial_pinmux {
-		mux {
-			pins = "gpio60", "gpio61";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	spi_0_pins: spi_0_pinmux {
-		pin {
-			function = "blsp_spi0";
-			pins = "gpio54", "gpio55", "gpio56", "gpio57";
-			drive-strength = <12>;
-			bias-disable;
-		};
-		pin_cs {
-			function = "gpio";
-			pins = "gpio54";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&blsp1_spi1 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
-	m25p80@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "0:SBL1";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			partition1@40000 {
-				label = "0:MIBIB";
-				reg = <0x00040000 0x00020000>;
-				read-only;
-			};
-			partition2@60000 {
-				label = "0:QSEE";
-				reg = <0x00060000 0x00060000>;
-				read-only;
-			};
-			partition3@c0000 {
-				label = "0:CDT";
-				reg = <0x000c0000 0x00010000>;
-				read-only;
-			};
-			partition4@d0000 {
-				label = "0:DDRPARAMS";
-				reg = <0x000d0000 0x00010000>;
-				read-only;
-			};
-			partition5@e0000 {
-				label = "0:APPSBLENV";
-				reg = <0x000e0000 0x00010000>;
-				read-only;
-			};
-			partition6@f0000 {
-				label = "0:APPSBL";
-				reg = <0x000f0000 0x00090000>;
-				read-only;
-			};
-			partition7@180000 {
-				label = "0:ART";
-				reg = <0x00180000 0x00010000>;
-				read-only;
-			};
-			partition8@190000 {
-				compatible = "denx,fit";
-				label = "firmware";
-				reg = <0x190000 0x1dc0000>;
-			};
-			partition9@1f50000 {
-				label = "u-boot-env";
-				reg = <0x01f50000 0x00010000>;
-			};
-			partition10@1f60000 {
-				label = "userconfig";
-				reg = <0x01f60000 0x000a0000>;
-			};
-		};
-	};
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&gmac0 {
-	vlan_tag = <2 0x20>;
-};
-
-&gmac1 {
-	vlan_tag = <1 0x10>;
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "EnGenius-EAP1300";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "EnGenius-EAP1300";
-};
diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-emd1.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-emd1.dts
deleted file mode 100644
index cf4f793f21..0000000000
--- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-emd1.dts
+++ /dev/null
@@ -1,233 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "EnGenius EMD1";
-	compatible = "engenius,emd1";
-
-	aliases {
-		led-boot = &led_power;
-		led-failsafe = &led_power;
-		led-running = &led_power;
-		led-upgrade = &led_power;
-	};
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-			switch_lan_bmp = <0x20>;
-			switch_wan_bmp = <0x00>;
-		};
-
-		edma@c080000 {
-			status = "okay";
-			qcom,num_gmac = <1>;
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led_power: power {
-			label = "emd1:white:power";
-			gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
-		};
-
-		wlan2g {
-			label = "emd1:red:wlan2g";
-			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "phy0tpt";
-		};
-
-		wlan5g {
-			label = "emd1:blue:wlan5g";
-			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "phy1tpt";
-		};
-
-		mesh {
-			label = "emd1:orange:mesh";
-			gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&tlmm {
-	serial_pins: serial_pinmux {
-		mux {
-			pins = "gpio60", "gpio61";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	spi_0_pins: spi_0_pinmux {
-		pin {
-			function = "blsp_spi0";
-			pins = "gpio54", "gpio55", "gpio56", "gpio57";
-			drive-strength = <12>;
-			bias-disable;
-		};
-
-		pin_cs {
-			function = "gpio";
-			pins = "gpio54";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&blsp1_spi1 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition0@0 {
-				label = "0:SBL1";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			partition1@40000 {
-				label = "0:MIBIB";
-				reg = <0x00040000 0x00020000>;
-				read-only;
-			};
-			partition2@60000 {
-				label = "0:QSEE";
-				reg = <0x00060000 0x00060000>;
-				read-only;
-			};
-			partition3@c0000 {
-				label = "0:CDT";
-				reg = <0x000c0000 0x00010000>;
-				read-only;
-			};
-			partition4@d0000 {
-				label = "0:DDRPARAMS";
-				reg = <0x000d0000 0x00010000>;
-				read-only;
-			};
-			partition5@e0000 {
-				label = "0:APPSBLENV";
-				reg = <0x000e0000 0x00010000>;
-				read-only;
-			};
-			partition6@f0000 {
-				label = "0:APPSBL";
-				reg = <0x000f0000 0x00080000>;
-				read-only;
-			};
-			partition7@170000 {
-				label = "0:ART";
-				reg = <0x00170000 0x00010000>;
-				read-only;
-			};
-			partition8@180000 {
-				label = "userconfig";
-				reg = <0x00180000 0x00080000>;
-				read-only;
-			};
-			partition9@200000 {
-				compatible = "denx,fit";
-				label = "firmware";
-				reg = <0x200000 0x01e00000>;
-			};
-		};
-	};
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&gmac0 {
-	qcom,phy_mdio_addr = <4>;
-	qcom,poll_required = <1>;
-	qcom,forced_speed = <1000>;
-	qcom,forced_duplex = <1>;
-	vlan_tag = <1 0x20>;
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "EnGenius-EMD1";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "EnGenius-EMD1";
-};
diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-ens620ext.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-ens620ext.dts
deleted file mode 100644
index 8636b18b2e..0000000000
--- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-ens620ext.dts
+++ /dev/null
@@ -1,265 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "EnGenius ENS620EXT";
-	compatible = "engenius,ens620ext";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>;
-	};
-
-	aliases {
-		led-boot = &power;
-		led-failsafe = &power;
-		led-running = &power;
-		led-upgrade = &power;
-	};
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-
-		/*
-		 * Disable the broken restart as a workaround for the buggy
-		 * 3.0.0/3.0.1 U-boots that ship with the device.
-		 * Note: The watchdog is now used to restart this device.
-		 */
-		restart@4ab000 {
-			status = "disabled";
-		};
-	};
-
-	buttons {
-		compatible = "gpio-keys";
-
-		wps {
-			label = "wps";
-			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		power: power {
-			label = "ens620ext:amber:power";
-			gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
-		};
-
-		lan1 {
-			label = "ens620ext:green:lan1";
-			gpios = <&tlmm 1 GPIO_ACTIVE_LOW>;
-		};
-
-		lan2 {
-			label = "ens620ext:green:lan2";
-			gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
-		};
-
-		wlan2G {
-			label = "ens620ext:green:wlan2G";
-			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan5G {
-			label = "ens620ext:green:wlan5G";
-			gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&tlmm {
-	serial_pins: serial_pinmux {
-		mux {
-			pins = "gpio60", "gpio61";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	spi_0_pins: spi_0_pinmux {
-		mux {
-			function = "blsp_spi0";
-			pins = "gpio55", "gpio56", "gpio57";
-			drive-strength = <12>;
-			bias-disable;
-		};
-
-		mux_cs {
-			function = "gpio";
-			pins = "gpio54";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-};
-
-&blsp1_spi1 { /* BLSP1 QUP1 */
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <50000000>;
-		m25p,fast-read;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "SBL1";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			partition@40000 {
-				label = "MIBIB";
-				reg = <0x00040000 0x00020000>;
-				read-only;
-			};
-			partition@60000 {
-				label = "QSEE";
-				reg = <0x00060000 0x00060000>;
-				read-only;
-			};
-			partition@c0000 {
-				label = "CDT";
-				reg = <0x000c0000 0x00010000>;
-				read-only;
-			};
-			partition@d0000 {
-				label = "DDRPARAMS";
-				reg = <0x000d0000 0x00010000>;
-				read-only;
-			};
-			partition@e0000 {
-				label = "APPSBLENV"; /* uboot env*/
-				reg = <0x000e0000 0x00010000>;
-				read-only;
-			};
-			partition@f0000 {
-				label = "APPSBL"; /* uboot */
-				reg = <0x000f0000 0x00090000>;
-				read-only;
-			};
-			partition@180000 {
-				label = "ART";
-				reg = <0x00180000 0x00010000>;
-				read-only;
-			};
-			partition@190000 {
-				compatible = "denx,fit";
-				label = "firmware";
-				reg = <0x00190000 0x14d0000>;
-			};
-			partition@1660000 {
-				label = "failsafe";
-				reg = <0x01660000 0x008F0000>;
-				read-only;
-			};
-			partition@1f50000 {
-				label = "u-boot-env";
-				reg = <0x01f50000 0x00010000>;
-				read-only;
-			};
-			partition@1f60000 {
-				label = "userconfig";
-				reg = <0x01f60000 0x000a0000>;
-				read-only;
-			};
-		};
-	};
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&usb3_ss_phy {
-	status = "okay";
-};
-
-&usb3_hs_phy {
-	status = "okay";
-};
-
-&usb2_hs_phy {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "EnGenius-ENS620EXT";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "EnGenius-ENS620EXT";
-};
diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-ex6100v2.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-ex6100v2.dts
deleted file mode 100644
index 2b93dcbb99..0000000000
--- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-ex6100v2.dts
+++ /dev/null
@@ -1,33 +0,0 @@
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- * Copyright (c) 2018, David Bauer <mail@david-bauer.net>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4018-ex61x0v2.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Netgear EX6100v2";
-	compatible = "netgear,ex6100v2";
-};
-
-&wifi0 {
-	qcom,ath10k-calibration-variant = "Netgear-EX6100v2";
-};
-
-&wifi1 {
-	qcom,ath10k-calibration-variant = "Netgear-EX6100v2";
-};
diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-ex6150v2.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-ex6150v2.dts
deleted file mode 100644
index f1c44c1ae8..0000000000
--- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-ex6150v2.dts
+++ /dev/null
@@ -1,33 +0,0 @@
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- * Copyright (c) 2018, David Bauer <mail@david-bauer.net>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4018-ex61x0v2.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Netgear EX6150v2";
-	compatible = "netgear,ex6150v2";
-};
-
-&wifi0 {
-	qcom,ath10k-calibration-variant = "Netgear-EX6150v2";
-};
-
-&wifi1 {
-	qcom,ath10k-calibration-variant = "Netgear-EX6150v2";
-};
diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi
deleted file mode 100644
index cc70080c92..0000000000
--- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi
+++ /dev/null
@@ -1,312 +0,0 @@
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- * Copyright (c) 2018, David Bauer <mail@david-bauer.net>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "Netgear EX61X0v2";
-	compatible = "netgear,ex61x0v2";
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-		};
-
-		edma@c080000 {
-			status = "okay";
-			qcom,num_gmac = <1>;
-		};
-	};
-
-	aliases {
-		led-boot = &power_amber;
-		led-failsafe = &power_amber;
-		led-running = &power_green;
-		led-upgrade = &power_amber;
-		label-mac-device = &gmac0;
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		wps {
-			label = "wps";
-			gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-
-		reset {
-			label = "reset";
-			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	led_spi {
-		compatible = "spi-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		sck-gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
-		mosi-gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
-		num-chipselects = <0>;
-
-		led_gpio: led_gpio@0 {
-			compatible = "fairchild,74hc595";
-			reg = <0>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			registers-number = <1>;
-			spi-max-frequency = <1000000>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		power_amber: power_amber {
-			label = "ex61x0v2:amber:power";
-			gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
-		};
-
-		power_green: power_green {
-			label = "ex61x0v2:green:power";
-			gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
-		};
-
-		right {
-			label = "ex61x0v2:blue:right";
-			gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
-		};
-
-		left {
-			label = "ex61x0v2:blue:left";
-			gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
-		};
-
-		client_green {
-			label = "ex61x0v2:green:client";
-			gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
-		};
-
-		client_red {
-			label = "ex61x0v2:red:client";
-			gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
-		};
-
-		router_green {
-			label = "ex61x0v2:green:router";
-			gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
-		};
-
-		router_red {
-			label = "ex61x0v2:red:router";
-			gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
-		};
-
-		wps {
-			label = "ex61x0v2:green:wps";
-			gpios = <&tlmm 1 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&tlmm {
-	serial_pins: serial_pinmux {
-		mux {
-			pins = "gpio60", "gpio61";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	spi_0_pins: spi_0_pinmux {
-		pin {
-			function = "blsp_spi0";
-			pins = "gpio55", "gpio56", "gpio57";
-			drive-strength = <12>;
-			bias-disable;
-		};
-		pin_cs {
-			function = "gpio";
-			pins = "gpio54";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-};
-
-&blsp1_spi1 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
-	mx25l12805d@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition0@0 {
-				label = "SBL1";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-
-			partition1@40000 {
-				label = "MIBIB";
-				reg = <0x00040000 0x00020000>;
-				read-only;
-			};
-
-			partition2@60000 {
-				label = "QSEE";
-				reg = <0x00060000 0x00060000>;
-				read-only;
-			};
-
-			partition3@c0000 {
-				label = "CDT";
-				reg = <0x000c0000 0x00010000>;
-				read-only;
-			};
-
-			partition4@d0000 {
-				label = "DDRPARAMS";
-				reg = <0x000d0000 0x00010000>;
-				read-only;
-			};
-
-			partition5@E0000 {
-				label = "APPSBLENV";
-				reg = <0x000e0000 0x00010000>;
-				read-only;
-			};
-
-			partition6@F0000 {
-				label = "APPSBL";
-				reg = <0x000f0000 0x00080000>;
-				read-only;
-			};
-
-			partition7@170000 {
-				label = "ART";
-				reg = <0x00170000 0x00010000>;
-				read-only;
-			};
-
-			partition8@180000 {
-				label = "config";
-				reg = <0x00180000 0x00010000>;
-				read-only;
-			};
-
-			partition9@190000 {
-				label = "pot";
-				reg = <0x00190000 0x00010000>;
-				read-only;
-			};
-
-			partition10@1a0000 {
-				label = "dnidata";
-				reg = <0x001a0000 0x00010000>;
-				read-only;
-			};
-
-			partition11@1b0000 {
-				compatible = "denx,fit";
-				label = "firmware";
-				reg = <0x001b0000 0x00e10000>;
-			};
-
-			partition12@fc0000 {
-				label = "language";
-				reg = <0x00fc0000 0x00040000>;
-				read-only;
-			};
-		};
-	};
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-};
-
-&wifi1 {
-	status = "okay";
-};
diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts
deleted file mode 100644
index b2a32946d9..0000000000
--- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts
+++ /dev/null
@@ -1,292 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "AVM FRITZ!Box 4040";
-	compatible = "avm,fritzbox-4040";
-
-	aliases {
-		led-boot = &power;
-		led-failsafe = &flash;
-		led-running = &power;
-		led-upgrade = &flash;
-		label-mac-device = &gmac0;
-	};
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		tcsr@194b000 {
-			compatible = "qcom,tcsr";
-			reg = <0x194b000 0x100>;
-			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		usb2@60f8800 {
-			status = "okay";
-		};
-
-		usb3@8af8800 {
-			status = "okay";
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		qca8075: ess-switch@c000000 {
-			status = "okay";
-
-			#gpio-cells = <2>;
-			gpio-controller;
-
-			enable-usb-power {
-				gpio-hog;
-				line-name = "enable USB3 power";
-				gpios = <7 GPIO_ACTIVE_HIGH>;
-				output-high;
-			};
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		wlan {
-			label = "wlan";
-			gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RFKILL>;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-	};
-
-	switch-leds {
-		compatible = "gpio-leds";
-
-		wlan {
-			label = "fritz4040:green:wlan";
-			gpios = <&qca8075 1 GPIO_ACTIVE_HIGH>;
-		};
-
-		panic: info_red {
-			label = "fritz4040:red:info";
-			gpios = <&qca8075 3 GPIO_ACTIVE_HIGH>;
-			panic-indicator;
-		};
-
-		wan {
-			label = "fritz4040:green:wan";
-			gpios = <&qca8075 5 GPIO_ACTIVE_HIGH>;
-		};
-
-		power: power {
-			label = "fritz4040:green:power";
-			gpios = <&qca8075 11 GPIO_ACTIVE_HIGH>;
-		};
-
-		lan {
-			label = "fritz4040:green:lan";
-			gpios = <&qca8075 13 GPIO_ACTIVE_HIGH>;
-		};
-
-		flash: info_amber {
-			label = "fritz4040:amber:info";
-			gpios = <&qca8075 15 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&tlmm {
-	serial_pins: serial_pinmux {
-		mux {
-			pins = "gpio60", "gpio61";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	spi_0_pins: spi_0_pinmux {
-		mux {
-			function = "blsp_spi0";
-			pins = "gpio55", "gpio56", "gpio57";
-			drive-strength = <12>;
-			bias-disable;
-		};
-
-		mux_cs {
-			function = "gpio";
-			pins = "gpio54";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&blsp1_spi1 { /* BLSP1 QUP1 */
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-		status = "okay";
-		m25p,fast-read;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition0@0 {
-				label = "SBL1";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			partition1@40000 {
-				label = "MIBIB";
-				reg = <0x00040000 0x00020000>;
-				read-only;
-			};
-			partition2@60000 {
-				label = "QSEE";
-				reg = <0x00060000 0x00060000>;
-				read-only;
-			};
-			partition3@c0000 {
-				label = "CDT";
-				reg = <0x000c0000 0x00010000>;
-				read-only;
-			};
-			partition4@d0000 {
-				label = "DDRPARAMS";
-				reg = <0x000d0000 0x00010000>;
-				read-only;
-			};
-			partition5@e0000 {
-				label = "APPSBLENV"; /* uboot env - empty */
-				reg = <0x000e0000 0x00010000>;
-				read-only;
-			};
-			partition6@f0000 {
-				label = "urlader"; /* APPSBL */
-				reg = <0x000f0000 0x0002dc000>;
-				read-only;
-			};
-			partition7@11dc00 {
-				/* make a backup of this partition! */
-				label = "urlader_config";
-				reg = <0x0011dc00 0x00002400>;
-				read-only;
-			};
-			partition8@120000 {
-				label = "tffs1";
-				reg = <0x00120000 0x00080000>;
-				read-only;
-			};
-			partition9@1a0000 {
-				label = "tffs2";
-				reg = <0x001a0000 0x00080000>;
-				read-only;
-			};
-			partition10@220000 {
-				label = "uboot";
-				reg = <0x00220000 0x00080000>;
-				read-only;
-			};
-			partition11@2A0000 {
-				compatible = "denx,fit";
-				label = "firmware";
-				reg = <0x002a0000 0x01c60000>;
-			};
-			partition12@1f00000 {
-				label = "jffs2";
-				reg = <0x01f00000 0x00100000>;
-			};
-		};
-	};
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&usb3_ss_phy {
-	status = "okay";
-};
-
-&usb3_hs_phy {
-	status = "okay";
-};
-
-&usb2_hs_phy {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "AVM-FRITZBox-4040";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "AVM-FRITZBox-4040";
-};
diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts
deleted file mode 100644
index 988b86b68d..0000000000
--- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts
+++ /dev/null
@@ -1,9 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-// Copyright (c) 2018, Robert Marko <robimarko@gmail.com>
-
-#include "qcom-ipq4018-jalapeno.dtsi"
-
-/ {
-	model = "8devices Jalapeno";
-	compatible = "8dev,jalapeno";
-};
diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dtsi b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dtsi
deleted file mode 100644
index 3af6de1f60..0000000000
--- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dtsi
+++ /dev/null
@@ -1,269 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-// Copyright (c) 2018, Robert Marko <robimarko@gmail.com>
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-
-			pinctrl-0 = <&mdio_pins>;
-			pinctrl-names = "default";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		counter@4a1000 {
-			compatible = "qcom,qca-gcnt";
-			reg = <0x4a1000 0x4>;
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		tcsr@194b000 {
-			status = "okay";
-
-			compatible = "qcom,tcsr";
-			reg = <0x194b000 0x100>;
-			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		usb2: usb2@60f8800 {
-			status = "okay";
-		};
-
-		usb3: usb3@8af8800 {
-			status = "okay";
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-
-			switch_lan_bmp = <0x10>; /* lan port bitmap */
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-	};
-};
-
-&tlmm {
-	mdio_pins: mdio_pinmux {
-		pinmux_1 {
-			pins = "gpio53";
-			function = "mdio";
-		};
-
-		pinmux_2 {
-			pins = "gpio52";
-			function = "mdc";
-		};
-
-		pinconf {
-			pins = "gpio52", "gpio53";
-			bias-pull-up;
-		};
-	};
-
-	serial_pins: serial_pinmux {
-		mux {
-			pins = "gpio60", "gpio61";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	spi_0_pins: spi_0_pinmux {
-		pin {
-			function = "blsp_spi0";
-			pins = "gpio55", "gpio56", "gpio57";
-			drive-strength = <2>;
-			bias-disable;
-		};
-
-		pin_cs {
-			function = "gpio";
-			pins = "gpio54", "gpio59";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&blsp1_spi1 {
-	status = "okay";
-
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>;
-
-	flash@0 {
-		status = "okay";
-
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "SBL1";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-
-			partition@40000 {
-				label = "MIBIB";
-				reg = <0x00040000 0x00020000>;
-				read-only;
-			};
-
-			partition@60000 {
-				label = "QSEE";
-				reg = <0x00060000 0x00060000>;
-				read-only;
-			};
-
-			partition@c0000 {
-				label = "CDT";
-				reg = <0x000c0000 0x00010000>;
-				read-only;
-			};
-
-			partition@d0000 {
-				label = "DDRPARAMS";
-				reg = <0x000d0000 0x00010000>;
-				read-only;
-			};
-
-			partition@e0000 {
-				label = "APPSBLENV"; /* uboot env*/
-				reg = <0x000e0000 0x00010000>;
-				read-only;
-			};
-
-			partition@f0000 {
-				label = "APPSBL"; /* uboot */
-				reg = <0x000f0000 0x00080000>;
-				read-only;
-			};
-
-			partition@170000 {
-				label = "ART";
-				reg = <0x00170000 0x00010000>;
-				read-only;
-			};
-		};
-	};
-
-	spi-nand@1 {
-		status = "okay";
-
-		compatible = "spi-nand";
-		reg = <1>;
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "ubi";
-				reg = <0x00000000 0x08000000>;
-			};
-		};
-	};
-};
-
-&blsp1_uart1 {
-	status = "okay";
-
-	pinctrl-0 = <&serial_pins>;
-	pinctrl-names = "default";
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&gmac0 {
-	qcom,poll_required = <1>;
-	qcom,poll_required_dynamic = <1>;
-	qcom,phy_mdio_addr = <3>;
-	vlan_tag = <1 0x10>;
-};
-
-&gmac1 {
-	qcom,poll_required = <1>;
-	qcom,poll_required_dynamic = <1>;
-	qcom,phy_mdio_addr = <4>;
-	vlan_tag = <2 0x20>;
-};
-
-&wifi0 {
-	status = "okay";
-
-	qcom,ath10k-calibration-variant = "8devices-Jalapeno";
-};
-
-&wifi1 {
-	status = "okay";
-
-	qcom,ath10k-calibration-variant = "8devices-Jalapeno";
-};
-
-&usb3_ss_phy {
-	status = "okay";
-};
-
-&usb3_hs_phy {
-	status = "okay";
-};
-
-&usb2_hs_phy {
-	status = "okay";
-};
diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-meshpoint-one.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-meshpoint-one.dts
deleted file mode 100644
index 2e21b55325..0000000000
--- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-meshpoint-one.dts
+++ /dev/null
@@ -1,81 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/* Copyright (c) 2019, CRISIS INNOVATION LAB d.o.o.
- * Author: Robert Marko <robert@meshpoint.me>
- */
-
-#include "qcom-ipq4018-jalapeno.dtsi"
-
-/ {
-	model = "Crisis Innovation Lab MeshPoint.One";
-	compatible = "cilab,meshpoint-one";
-
-	aliases {
-		led-boot = &led_status;
-		led-failsafe = &led_status;
-		led-running = &led_status;
-		led-upgrade = &led_status;
-	};
-
-	soc {
-		i2c-gpio {
-			status = "okay";
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			compatible = "i2c-gpio";
-			gpios = <&tlmm 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) /* sda */
-					 &tlmm 4 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) /* scl */
-					>;
-
-			bme280@76 {
-				status = "okay";
-
-				compatible = "bosch,bme280";
-				reg = <0x76>;
-			};
-
-			pcf2129@51 {
-				status = "okay";
-
-				compatible = "nxp,pcf2129";
-				reg = <0x51>;
-			};
-
-			ina230@40 {
-				status = "okay";
-
-				compatible = "ti,ina230";
-				reg = <0x40>;
-				shunt-resistor = <2000>;
-			};
-
-			ina230@44 {
-				status = "okay";
-
-				compatible = "ti,ina230";
-				reg = <0x44>;
-				shunt-resistor = <2000>;
-			};
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART >;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led_status: status {
-			label = "meshpoint-one:blue:status";
-			gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts
deleted file mode 100644
index a8c144f928..0000000000
--- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts
+++ /dev/null
@@ -1,337 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "ZyXEL NBG6617";
-	compatible = "zyxel,nbg6617";
-
-	chosen {
-		/*
-		 * the vendor u-boot adds root and mtdparts cmdline parameters
-		 * which we don't want... but we have to overwrite them or else
-		 * the kernel will take them at face value.
-		 */
-		bootargs-append = " mtdparts= root=31:13";
-	};
-
-	aliases {
-		led-boot = &power;
-		led-failsafe = &power;
-		led-running = &power;
-		led-upgrade = &power;
-	};
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		tcsr@194b000 {
-			compatible = "qcom,tcsr";
-			reg = <0x194b000 0x100>;
-			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		usb2@60f8800 {
-			status = "okay";
-
-			dwc3@6000000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				usb2_port1: port@1 {
-					reg = <1>;
-					#trigger-source-cells = <0>;
-				};
-			};
-		};
-
-		usb3@8af8800 {
-			status = "okay";
-
-			dwc3@8a00000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				usb3_port1: port@1 {
-					reg = <1>;
-					#trigger-source-cells = <0>;
-				};
-
-				usb3_port2: port@2 {
-					reg = <2>;
-					#trigger-source-cells = <0>;
-				};
-			};
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		wlan {
-			label = "wlan";
-			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_RFKILL>;
-			linux,input-type = <EV_SW>;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-
-		reset {
-			label = "reset";
-			gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&led_pins>;
-		pinctrl-names = "default";
-
-		power: power {
-			label = "nbg6617:green:power";
-			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
-		};
-
-		usb {
-			label = "nbg6617:green:usb";
-			gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
-			trigger-sources = <&usb2_port1>, <&usb3_port1>, <&usb3_port2>;
-			linux,default-trigger = "usbport";
-		};
-
-		wlan2G {
-			label = "nbg6617:green:wlan2G";
-			gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan5G {
-			label = "nbg6617:green:wlan5G";
-			gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
-		};
-
-		wps {
-			label = "nbg6617:green:wps";
-			gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&tlmm {
-	serial_pins: serial_pinmux {
-		mux {
-			pins = "gpio60", "gpio61";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-	spi_0_pins: spi_0_pinmux {
-		mux {
-			function = "blsp_spi0";
-			pins = "gpio55", "gpio56", "gpio57";
-			drive-strength = <12>;
-			bias-disable;
-		};
-
-		mux_cs {
-			function = "gpio";
-			pins = "gpio54";
-			drive-strength = <2>;
-			bias-disable;
-			output-low;
-		};
-	};
-	led_pins: led_pinmux {
-		mux {
-			pins = "gpio0", "gpio1", "gpio3", "gpio5", "gpio58";
-			drive-strength = <0x8>;
-			bias-disable;
-			output-low;
-		};
-	};
-};
-
-&blsp1_spi1 { /* BLSP1 QUP1 */
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
-	mx25l25635f@0 {
-		compatible = "mx25l25635f", "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-		status = "okay";
-		m25p,fast-read;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition0@0 {
-				label = "SBL1";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			partition1@40000 {
-				label = "MIBIB";
-				reg = <0x00040000 0x00020000>;
-				read-only;
-			};
-			partition2@60000 {
-				label = "QSEE";
-				reg = <0x00060000 0x00060000>;
-				read-only;
-			};
-			partition3@c0000 {
-				label = "CDT";
-				reg = <0x000c0000 0x00010000>;
-				read-only;
-			};
-			partition4@d0000 {
-				label = "DDRPARAMS";
-				reg = <0x000d0000 0x00010000>;
-				read-only;
-			};
-			partition5@e0000 {
-				label = "APPSBL"; /* u-boot */
-				reg = <0x000e0000 0x00080000>;
-				/* U-Boot Standalone App "zloader" is located at 0x64000 */
-				read-only;
-			};
-			partition6@160000 {
-				label = "APPSBLENV"; /* u-boot env */
-				reg = <0x00160000 0x00010000>;
-			};
-			partition7@170000 {
-				/* make a backup of this partition! */
-				label = "ART";
-				reg = <0x00170000 0x00010000>;
-				read-only;
-			};
-			partition8@180000 {
-				label = "kernel";
-				reg = <0x00180000 0x00400000>;
-			};
-			partition9@580000 {
-				label = "dualflag";
-				reg = <0x00580000 0x00010000>;
-				read-only;
-			};
-			partition10@590000 {
-				label = "header";
-				reg = <0x00590000 0x00010000>;
-			};
-			partition11@5a0000 {
-				label = "romd";
-				reg = <0x005a0000 0x00100000>;
-				read-only;
-			};
-			partition12@6a0000 {
-				label = "not_root_data";
-				/*
-				 * for some strange reason, someone at ZyXEL
-				 * had the "great" idea to put the rootfs_data
-				 * in front of rootfs... Don't do that!
-				 * As a result this one, full MebiByte remains
-				 * unused.
-				 */
-				reg = <0x006a0000 0x00100000>;
-			};
-			partition13@7a0000 {
-				label = "rootfs";
-				reg = <0x007a0000 0x01860000>;
-			};
-		};
-	};
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "ZyXEL-NBG6617";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "ZyXEL-NBG6617";
-};
-
-&usb3_ss_phy {
-	status = "okay";
-};
-
-&usb3_hs_phy {
-	status = "okay";
-};
-
-&usb2_hs_phy {
-	status = "okay";
-};
diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts
deleted file mode 100644
index a0030f77ce..0000000000
--- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts
+++ /dev/null
@@ -1,309 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "ASUS RT-AC58U";
-	compatible = "asus,rt-ac58u";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x8000000>;
-	};
-
-	aliases {
-		led-boot = &led_power;
-		led-failsafe = &led_power;
-		led-running = &led_power;
-		led-upgrade = &led_power;
-	};
-
-	chosen {
-		bootargs-append = " ubi.mtd=UBI_DEV";
-	};
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		tcsr@194b000 {
-			compatible = "qcom,tcsr";
-			reg = <0x194b000 0x100>;
-			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		usb3@8af8800 {
-			status = "okay";
-
-			dwc3@8a00000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				usb3_port1: port@1 {
-					reg = <1>;
-					#trigger-source-cells = <0>;
-				};
-
-				usb3_port2: port@2 {
-					reg = <2>;
-					#trigger-source-cells = <0>;
-				};
-			};
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led_power: status {
-			label = "rt-ac58u:blue:status";
-			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
-		};
-
-		wan {
-			label = "rt-ac58u:blue:wan";
-			gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan2G {
-			label = "rt-ac58u:blue:wlan2G";
-			gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "phy0tpt";
-		};
-
-		wlan5G {
-			label = "rt-ac58u:blue:wlan5G";
-			gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "phy1tpt";
-		};
-
-		usb {
-			label = "rt-ac58u:blue:usb";
-			gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
-			trigger-sources = <&usb3_port1>, <&usb3_port2>;
-			linux,default-trigger = "usbport";
-		};
-
-		lan {
-			label = "rt-ac58u:blue:lan";
-			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&tlmm {
-	serial_pins: serial_pinmux {
-		mux {
-			pins = "gpio60", "gpio61";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	spi_0_pins: spi_0_pinmux {
-		mux {
-			function = "blsp_spi0";
-			pins = "gpio55", "gpio56", "gpio57";
-			drive-strength = <12>;
-			bias-disable;
-		};
-
-		mux_cs {
-			function = "gpio";
-			pins = "gpio54", "gpio59";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-};
-
-&blsp1_spi1 { /* BLSP1 QUP1 */
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
-		   <&tlmm 59 GPIO_ACTIVE_HIGH>;
-
-	flash@0 {
-		/*
-		 * U-boot looks for "n25q128a11" node,
-		 * if we don't have it, it will spit out the following warning:
-		 * "ipq: fdt fixup unable to find compatible node".
-		 */
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		linux,modalias = "m25p80", "mx25l1606e", "n25q128a11";
-		spi-max-frequency = <30000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "SBL1";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			partition@40000 {
-				label = "MIBIB";
-				reg = <0x00040000 0x00020000>;
-				read-only;
-			};
-			partition@60000 {
-				label = "QSEE";
-				reg = <0x00060000 0x00060000>;
-				read-only;
-			};
-			partition@c0000 {
-				label = "CDT";
-				reg = <0x000c0000 0x00010000>;
-				read-only;
-			};
-			partition@d0000 {
-				label = "DDRPARAMS";
-				reg = <0x000d0000 0x00010000>;
-				read-only;
-			};
-			partition@e0000 {
-				label = "APPSBLENV"; /* uboot env*/
-				reg = <0x000e0000 0x00010000>;
-				read-only;
-			};
-			partition@f0000 {
-				label = "APPSBL"; /* uboot */
-				reg = <0x000f0000 0x00080000>;
-				read-only;
-			};
-			partition@170000 {
-				label = "ART";
-				reg = <0x00170000 0x00010000>;
-				read-only;
-			};
-			/* 0x00180000 - 0x00200000 unused */
-		};
-	};
-
-	spi-nand@1 {
-		compatible = "spi-nand";
-		reg = <1>;
-		spi-max-frequency = <30000000>;
-
-		/*
-		 * U-boot looks for "spinand,mt29f" node,
-		 * if we don't have it, it will spit out the following warning:
-		 * "ipq: fdt fixup unable to find compatible node".
-		 */
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				/*
-				 * TODO: change to label = "ubi" once we drop 4.14.
-				 *       also drop the bootargs-append and all the
-				 *	 userspace CI_UBIPART="UBI_DEV" remains.
-				 */
-				label = "UBI_DEV";
-				reg = <0x00000000 0x08000000>;
-			};
-		};
-	};
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&usb3_ss_phy {
-	status = "okay";
-};
-
-&usb3_hs_phy {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "RT-AC58U";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "RT-AC58U";
-};
diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts
deleted file mode 100644
index 5932638da0..0000000000
--- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts
+++ /dev/null
@@ -1,265 +0,0 @@
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- * Copyright (c) 2018, David Bauer <mail@david-bauer.net>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "ZyXEL WRE6606";
-	compatible = "zyxel,wre6606";
-
-	aliases {
-		led-boot = &power;
-		led-failsafe = &power;
-		led-running = &power;
-		led-upgrade = &power;
-	};
-
-	chosen {
-		bootargs-append = " mtdparts=";
-	};
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-		};
-
-		edma@c080000 {
-			status = "okay";
-			qcom,num_gmac = <1>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		wps {
-			label = "wre6606:green:wps";
-			gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan5g_green {
-			label = "wre6606:green:wlan5g";
-			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
-		};
-
-		power: power {
-			label = "wre6606:green:power";
-			gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan5g_red {
-			label = "wre6606:red:wlan5g";
-			gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan2g_red {
-			label = "wre6606:red:wlan2g";
-			gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan2g_green {
-			label = "wre6606:green:wlan2g";
-			gpios = <&tlmm 59 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		wps {
-			label = "wps";
-			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-	};
-};
-
-&tlmm {
-	serial_pins: serial_pinmux {
-		mux {
-			pins = "gpio60", "gpio61";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	spi_0_pins: spi_0_pinmux {
-		pin {
-			function = "blsp_spi0";
-			pins = "gpio55", "gpio56", "gpio57";
-			drive-strength = <12>;
-			bias-disable;
-		};
-		pin_cs {
-			function = "gpio";
-			pins = "gpio54";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&blsp1_spi1 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
-	mx25l12805d@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition0@0 {
-				label = "SBL1";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-
-			partition1@40000 {
-				label = "MIBIB";
-				reg = <0x00040000 0x00020000>;
-				read-only;
-			};
-
-			partition2@60000 {
-				label = "QSEE";
-				reg = <0x00060000 0x00060000>;
-				read-only;
-			};
-
-			partition3@c0000 {
-				label = "CDT";
-				reg = <0x000c0000 0x00010000>;
-				read-only;
-			};
-
-			partition4@d0000 {
-				label = "DDRPARAMS";
-				reg = <0x000d0000 0x00010000>;
-				read-only;
-			};
-
-			partition5@E0000 {
-				label = "APPSBLENV";
-				reg = <0x000e0000 0x00010000>;
-				read-only;
-			};
-
-			partition6@F0000 {
-				label = "APPSBL";
-				reg = <0x000f0000 0x00080000>;
-				read-only;
-			};
-
-			partition7@170000 {
-				label = "ART";
-				reg = <0x00170000 0x00010000>;
-				read-only;
-			};
-
-			partition8@180000 {
-				compatible = "denx,fit";
-				label = "firmware";
-				reg = <0x00180000 0x00ce0000>;
-			};
-
-			partition9@e60000 {
-				label = "manufacture";
-				reg = <0x00e60000 0x00050000>;
-				read-only;
-			};
-
-			partition10@eb0000 {
-				label = "storage";
-				reg = <0x00eb0000 0x00150000>;
-				read-only;
-			};
-		};
-	};
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "ZyXEL-WRE6606";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "ZyXEL-WRE6606";
-};
diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-a62.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-a62.dts
deleted file mode 100644
index 25bbd6b332..0000000000
--- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-a62.dts
+++ /dev/null
@@ -1,243 +0,0 @@
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- * Copyright (c) 2017-2018, Sven Eckelmann <sven.eckelmann@openmesh.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "OpenMesh A62";
-	compatible = "openmesh,a62";
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@194b000 {
-			/* select hostmode */
-			compatible = "qcom,tcsr";
-			reg = <0x194b000 0x100>;
-			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		usb2: usb2@60f8800 {
-			status = "okay";
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			switch_lan_bmp = <0x10>;
-			switch_wan_bmp = <0x20>;
-
-			status = "okay";
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART >;
-		};
-	};
-
-	aliases {
-		led-boot = &power;
-		led-failsafe = &power;
-		led-running = &power;
-		led-upgrade = &power;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		red {
-			label = "a62:red:status";
-			gpios = <&tlmm 43 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
-		};
-
-		power: green {
-			label = "a62:green:status";
-			gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
-		};
-
-		blue {
-			label = "a62:blue:status";
-			gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
-		};
-	};
-
-	watchdog {
-		compatible = "linux,wdt-gpio";
-		gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
-		hw_algo = "toggle";
-		/* hw_margin_ms is actually 300s but driver limits it to 60s */
-		hw_margin_ms = <60000>;
-		always-running;
-	};
-};
-
-&tlmm {
-	serial_pins: serial_pinmux {
-		mux {
-			pins = "gpio16", "gpio17";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	spi_0_pins: spi_0_pinmux {
-		pin {
-			function = "blsp_spi0";
-			pins = "gpio13", "gpio14", "gpio15";
-			drive-strength = <12>;
-			bias-disable;
-		};
-		pin_cs {
-			function = "gpio";
-			pins = "gpio12";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-
-	enable-usb-power {
-		gpio-hog;
-		gpios = <58 GPIO_ACTIVE_HIGH>;
-		output-low;
-		line-name = "enable USB2 power";
-	};
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&blsp1_spi1 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
-
-	m25p80@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-		/* partitions are passed via bootloader */
-	};
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&gmac0 {
-	qcom,phy_mdio_addr = <3>;
-	qcom,poll_required = <1>;
-	qcom,forced_speed = <1000>;
-	qcom,forced_duplex = <1>;
-	vlan_tag = <1 0x10>;
-};
-
-&usb2_hs_phy {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-	perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
-	wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
-
-	bridge@0,0 {
-		reg = <0x00000000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
-		wifi2: wifi@1,0 {
-			compatible = "qcom,ath10k";
-			status = "okay";
-			reg = <0x00010000 0 0 0 0>;
-			qcom,ath10k-calibration-variant = "OM-A62";
-			ieee80211-freq-limit = <5170000 5350000>;
-		};
-	};
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "OM-A62";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "OM-A62";
-	ieee80211-freq-limit = <5470000 5875000>;
-};
diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
deleted file mode 100644
index 47202d28fe..0000000000
--- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
+++ /dev/null
@@ -1,21 +0,0 @@
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019-ap.dk04.1.dtsi"
-
-/ {
-	model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK04.1-C1";
-};
diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
deleted file mode 100644
index 9801354625..0000000000
--- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
+++ /dev/null
@@ -1,181 +0,0 @@
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1";
-	compatible = "qcom,ipq4019";
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		pinctrl@1000000 {
-			serial_0_pins: serial_pinmux {
-				mux {
-					pins = "gpio16", "gpio17";
-					function = "blsp_uart0";
-					bias-disable;
-				};
-			};
-
-			serial_1_pins: serial1_pinmux {
-				mux {
-					pins = "gpio8", "gpio9";
-					function = "blsp_uart1";
-					bias-disable;
-				};
-			};
-
-			spi_0_pins: spi_0_pinmux {
-				pinmux {
-					function = "blsp_spi0";
-					pins = "gpio13", "gpio14", "gpio15";
-				};
-				pinmux_cs {
-					function = "gpio";
-					pins = "gpio12";
-				};
-				pinconf {
-					pins = "gpio13", "gpio14", "gpio15";
-					drive-strength = <12>;
-					bias-disable;
-				};
-				pinconf_cs {
-					pins = "gpio12";
-					drive-strength = <2>;
-					bias-disable;
-					output-high;
-				};
-			};
-
-			i2c_0_pins: i2c_0_pinmux {
-				pinmux {
-					function = "blsp_i2c0";
-					pins = "gpio10", "gpio11";
-				};
-				pinconf {
-					pins = "gpio10", "gpio11";
-					drive-strength = <16>;
-					bias-disable;
-				};
-			};
-
-			nand_pins: nand_pins {
-
-				pullups {
-					pins = "gpio52", "gpio53", "gpio58",
-						"gpio59";
-					function = "qpic";
-					bias-pull-up;
-				};
-
-				pulldowns {
-					pins = "gpio54", "gpio55", "gpio56",
-						"gpio57", "gpio60", "gpio61",
-						"gpio62", "gpio63", "gpio64",
-						"gpio65", "gpio66", "gpio67",
-						"gpio68", "gpio69";
-					function = "qpic";
-					bias-pull-down;
-				};
-			};
-		};
-
-		blsp_dma: dma@7884000 {
-			status = "okay";
-		};
-
-		spi0: spi@78b5000 {
-			pinctrl-0 = <&spi_0_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-			cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
-
-			mx25l25635e@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0>;
-				compatible = "mx25l25635e";
-				spi-max-frequency = <24000000>;
-			};
-		};
-
-		i2c0: i2c@78b7000 { /* BLSP1 QUP2 */
-			pinctrl-0 = <&i2c_0_pins>;
-			pinctrl-names = "default";
-
-			status = "okay";
-		};
-
-		serial@78af000 {
-			pinctrl-0 = <&serial_0_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-
-		serial@78b0000 {
-			pinctrl-0 = <&serial_1_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-
-		usb3_ss_phy: ssphy@9a000 {
-			status = "okay";
-		};
-
-		usb3_hs_phy: hsphy@a6000 {
-			status = "okay";
-		};
-
-		usb3: usb3@8af8800 {
-			status = "okay";
-		};
-
-		usb2_hs_phy: hsphy@a8000 {
-			status = "okay";
-		};
-
-		usb2: usb2@60f8800 {
-			status = "okay";
-		};
-
-		cryptobam: dma@8e04000 {
-			status = "okay";
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		qpic_bam: dma@7984000 {
-			status = "okay";
-		};
-
-		nand: qpic-nand@79b0000 {
-			pinctrl-0 = <&nand_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-	};
-};
diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-cm520-79f.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-cm520-79f.dts
deleted file mode 100644
index f4c1685f47..0000000000
--- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-cm520-79f.dts
+++ /dev/null
@@ -1,354 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "MobiPromo CM520-79F";
-	compatible = "mobipromo,cm520-79f";
-
-	aliases {
-		led-boot = &led_sys;
-		led-failsafe = &led_sys;
-		led-running = &led_sys;
-		led-upgrade = &led_sys;
-	};
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-			pinctrl-0 = <&mdio_pins>;
-			pinctrl-names = "default";
-			reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
-			reset-delay-us = <1000>;
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		tcsr@194b000 {
-			compatible = "qcom,tcsr";
-			reg = <0x194b000 0x100>;
-			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		usb2@60f8800 {
-			status = "okay";
-
-			dwc3@6000000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				usb2_port1: port@1 {
-					reg = <1>;
-					#trigger-source-cells = <0>;
-				};
-			};
-		};
-
-		usb3@8af8800 {
-			status = "okay";
-
-			dwc3@8a00000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				usb3_port1: port@1 {
-					reg = <1>;
-					#trigger-source-cells = <0>;
-				};
-
-				usb3_port2: port@2 {
-					reg = <2>;
-					#trigger-source-cells = <0>;
-				};
-			};
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-	};
-
-	led_spi {
-		compatible = "spi-gpio";
-		#address-cells = <1>;
-		ranges;
-
-		sck-gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>;
-		mosi-gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>;
-		num-chipselects = <0>;
-
-		led_gpio: led_gpio@0 {
-			compatible = "fairchild,74hc595";
-			reg = <0>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			registers-number = <1>;
-			spi-max-frequency = <1000000>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		usb {
-			label = "cm520-79f:blue:usb";
-			gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "usbport";
-			trigger-sources = <&usb3_port1>, <&usb3_port2>, <&usb2_port1>;
-		};
-
-		led_sys: can {
-			label = "cm520-79f:blue:can";
-			gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
-		};
-
-		wan {
-			label = "cm520-79f:blue:wan";
-			gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
-		};
-
-		lan1 {
-			label = "cm520-79f:blue:lan1";
-			gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
-		};
-
-		lan2 {
-			label = "cm520-79f:blue:lan2";
-			gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
-		};
-
-		wlan2g {
-			label = "cm520-79f:blue:wlan2g";
-			gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "phy0tpt";
-		};
-
-		wlan5g {
-			label = "cm520-79f:blue:wlan5g";
-			gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "phy1tpt";
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&blsp1_uart1 {
-	status = "okay";
-};
-
-&blsp1_uart2 {
-	status = "okay";
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&gmac0 {
-	mtd-mac-address = <&art 0x1006>;
-};
-
-&gmac1 {
-	mtd-mac-address = <&art 0x5006>;
-};
-
-&nand {
-	pinctrl-0 = <&nand_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	nand@0 {
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "SBL1";
-				reg = <0x0 0x100000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "MIBIB";
-				reg = <0x100000 0x100000>;
-				read-only;
-			};
-
-			partition@200000 {
-				label = "BOOTCONFIG";
-				reg = <0x200000 0x100000>;
-			};
-
-			partition@300000 {
-				label = "QSEE";
-				reg = <0x300000 0x100000>;
-				read-only;
-			};
-
-			partition@400000 {
-				label = "QSEE_1";
-				reg = <0x400000 0x100000>;
-				read-only;
-			};
-
-			partition@500000 {
-				label = "CDT";
-				reg = <0x500000 0x80000>;
-				read-only;
-			};
-
-			partition@580000 {
-				label = "CDT_1";
-				reg = <0x580000 0x80000>;
-				read-only;
-			};
-
-			partition@600000 {
-				label = "BOOTCONFIG1";
-				reg = <0x600000 0x80000>;
-			};
-
-			partition@680000 {
-				label = "APPSBLENV";
-				reg = <0x680000 0x80000>;
-			};
-
-			partition@700000 {
-				label = "APPSBL";
-				reg = <0x700000 0x200000>;
-				read-only;
-			};
-
-			partition@900000 {
-				label = "APPSBL_1";
-				reg = <0x900000 0x200000>;
-				read-only;
-			};
-
-			art: partition@b00000 {
-				label = "ART";
-				reg = <0xb00000 0x80000>;
-				read-only;
-			};
-
-			partition@b80000 {
-				label = "ubi";
-				reg = <0xb80000 0x7480000>;
-			};
-		};
-	};
-};
-
-&qpic_bam {
-	status = "okay";
-};
-
-&tlmm {
-	mdio_pins: mdio_pinmux {
-		mux_1 {
-			pins = "gpio6";
-			function = "mdio";
-			bias-pull-up;
-		};
-
-		mux_2 {
-			pins = "gpio7";
-			function = "mdc";
-			bias-pull-up;
-		};
-	};
-
-	nand_pins: nand_pins {
-		pullups {
-			pins =	"gpio52", "gpio53", "gpio58",
-				"gpio59";
-			function = "qpic";
-			bias-pull-up;
-		};
-
-		pulldowns {
-			pins =	"gpio54", "gpio55", "gpio56",
-				"gpio57", "gpio60", "gpio61",
-				"gpio62", "gpio63", "gpio64",
-				"gpio65", "gpio66", "gpio67",
-				"gpio68", "gpio69";
-			function = "qpic";
-			bias-pull-down;
-		};
-	};
-};
-
-&usb3_ss_phy {
-	status = "okay";
-};
-
-&usb3_hs_phy {
-	status = "okay";
-};
-
-&usb2_hs_phy {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "CM520-79F";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "CM520-79F";
-};
diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c1.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c1.dts
deleted file mode 100644
index df1df2529a..0000000000
--- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c1.dts
+++ /dev/null
@@ -1,80 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- *
- * Copyright (c) 2018 Peng Zhang <sd20@qxwlan.com>
- *
- */
-
-#include "qcom-ipq4019-e2600ac.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Qxwlan E2600AC c1";
-	compatible = "qxwlan,e2600ac-c1";
-};
-
-&blsp1_spi1 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
-
-	flash@0 {
-		reg = <0>;
-		compatible = "jedec,spi-nor";
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "0:SBL1";
-				reg = <0x0 0x40000>;
-				read-only;
-			};
-			partition@40000 {
-				label = "0:MIBIB";
-				reg = <0x40000 0x20000>;
-				read-only;
-			};
-			partition@60000 {
-				label = "0:QSEE";
-				reg = <0x60000 0x60000>;
-				read-only;
-			};
-			partition@c0000 {
-				label = "0:CDT";
-				reg = <0xc0000 0x10000>;
-				read-only;
-			};
-			partition@d0000 {
-				label = "0:DDRPARAMS";
-				reg = <0xd0000 0x10000>;
-				read-only;
-			};
-			partition@e0000 {
-				label = "0:APPSBLENV";
-				reg = <0xe0000 0x10000>;
-				read-only;
-			};
-			partition@f0000 {
-				label = "0:APPSBL";
-				reg = <0xf0000 0x80000>;
-				read-only;
-			};
-			partition@170000 {
-				label = "0:ART";
-				reg = <0x170000 0x10000>;
-				read-only;
-			};
-			partition@180000 {
-				compatible = "denx,fit";
-				label = "firmware";
-				reg = <0x180000 0x1e80000>;
-			};
-		};
-	};
-};
-
diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c2.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c2.dts
deleted file mode 100644
index 9348ef4eec..0000000000
--- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c2.dts
+++ /dev/null
@@ -1,115 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- *
- * Copyright (c) 2018 Peng Zhang <sd20@qxwlan.com>
- *
- */
-
-#include "qcom-ipq4019-e2600ac.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Qxwlan E2600AC c2";
-	compatible = "qxwlan,e2600ac-c2";
-};
-
-&blsp1_spi1 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
-
-	flash@0 {
-		reg = <0>;
-		compatible = "jedec,spi-nor";
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "0:SBL1";
-				reg = <0x0 0x40000>;
-				read-only;
-			};
-			partition@40000 {
-				label = "0:MIBIB";
-				reg = <0x40000 0x20000>;
-				read-only;
-			};
-			partition@60000 {
-				label = "0:QSEE";
-				reg = <0x60000 0x60000>;
-				read-only;
-			};
-			partition@c0000 {
-				label = "0:CDT";
-				reg = <0xc0000 0x10000>;
-				read-only;
-			};
-			partition@d0000 {
-				label = "0:DDRPARAMS";
-				reg = <0xd0000 0x10000>;
-				read-only;
-			};
-			partition@e0000 {
-				label = "0:APPSBLENV";
-				reg = <0xe0000 0x10000>;
-				read-only;
-			};
-			partition@f0000 {
-				label = "0:APPSBL";
-				reg = <0xf0000 0x80000>;
-				read-only;
-			};
-			partition@170000 {
-				label = "0:ART";
-				reg = <0x170000 0x10000>;
-				read-only;
-			};
-		};
-	};
-};
-
-&nand {
-	pinctrl-0 = <&nand_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	nand@0 {
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "ubi";
-				reg = <0x00000000 0x04000000>;
-			};
-		};
-	};
-};
-
-&tlmm {
-	nand_pins: nand-pins {
-
-		pullups {
-			pins = "gpio53", "gpio58", "gpio59";
-			function = "qpic";
-			bias-pull-up;
-		};
-
-		pulldowns {
-			pins = "gpio54", "gpio55", "gpio56",
-				"gpio57", "gpio60", "gpio61",
-				"gpio62", "gpio63", "gpio64",
-				"gpio65", "gpio66", "gpio67",
-				"gpio68", "gpio69";
-			function = "qpic";
-			bias-pull-down;
-		};
-	};
-};
-
diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-e2600ac.dtsi b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-e2600ac.dtsi
deleted file mode 100644
index f4af2ba25f..0000000000
--- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-e2600ac.dtsi
+++ /dev/null
@@ -1,266 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- *
- * Copyright (c) 2018 Peng Zhang <sd20@qxwlan.com>
- *
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-
-	model = "Qxwlan E2600AC";
-	compatible = "qcom,ipq4019";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256MB */
-	};
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-			pinctrl-0 = <&mdio_pins>;
-			pinctrl-names = "default";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		tcsr@194b000 {
-			/* select hostmode */
-			compatible = "qcom,tcsr";
-			reg = <0x194b000 0x100>;
-			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-			status = "okay";
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		usb2: usb2@60f8800 {
-			status = "okay";
-
-			dwc3@6000000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				usb2_port1: port@1 {
-					reg = <1>;
-					#trigger-source-cells = <0>;
-				};
-			};
-		};
-
-		serial@78af000 {
-			pinctrl-0 = <&serial_0_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-
-		serial@78b0000 {
-			pinctrl-0 = <&serial_1_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-
-		i2c@78b7000 { /* BLSP1 QUP2 */
-			pinctrl-0 = <&i2c_0_pins>;
-			pinctrl-names = "default";
-
-			status = "okay";
-		};
-
-		usb3: usb3@8af8800 {
-			status = "okay";
-
-			dwc3@8a00000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				usb3_port1: port@1 {
-					reg = <1>;
-					#trigger-source-cells = <0>;
-				};
-
-				usb3_port2: port@2 {
-					reg = <2>;
-					#trigger-source-cells = <0>;
-				};
-			};
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-
-		leds {
-			compatible = "gpio-leds";
-
-			led1 {
-				label = "e2600ac:green:wlan0";
-				gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
-			};
-
-			led2 {
-				label = "e2600ac:green:wlan1";
-				gpios = <&tlmm 36 GPIO_ACTIVE_LOW>;
-			};
-
-			led3 {
-				label = "e2600ac:green:usb";
-				gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
-				trigger-sources = <&usb2_port1>, <&usb3_port1>, <&usb3_port2>;
-				linux,default-trigger = "usbport";
-			};
-
-			led4 {
-				label = "e2600ac:green:ctrl1";
-				gpios = <&tlmm 51 GPIO_ACTIVE_LOW>;
-			};
-
-			led5 {
-				label = "e2600ac:green:ctrl2";
-				gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
-			};
-
-			led6 {
-				label = "e2600ac:green:ctrl3";
-				gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
-			};
-		};
-
-		keys {
-			compatible = "gpio-keys";
-
-			reset {
-				label = "reset";
-				gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
-				linux,code = <KEY_RESTART>;
-			};
-		};
-	};
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&qpic_bam {
-	status = "okay";
-};
-
-&tlmm {
-	i2c_0_pins: i2c-0-pinmux {
-		mux {
-			pins = "gpio20", "gpio21";
-			function = "blsp_i2c0";
-			bias-disable;
-		};
-	};
-
-	mdio_pins: mdio_pinmux {
-		mux_1 {
-			pins = "gpio6";
-			function = "mdio";
-			bias-pull-up;
-		};
-		mux_2 {
-			pins = "gpio7";
-			function = "mdc";
-			bias-pull-up;
-		};
-	};
-
-	serial_0_pins: serial0-pinmux {
-		mux {
-			pins = "gpio16", "gpio17";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	serial_1_pins: serial1_pinmux {
-		mux {
-			pins = "gpio8", "gpio9";
-			function = "blsp_uart1";
-			bias-disable;
-		};
-	};
-
-	spi_0_pins: spi_0_pinmux {
-		pinmux {
-			function = "blsp_spi0";
-			pins = "gpio13", "gpio14", "gpio15";
-			drive-strength = <12>;
-			bias-disable;
-		};
-		pinmux_cs {
-			function = "gpio";
-			pins = "gpio12";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-};
-
-&usb3_ss_phy {
-	status = "okay";
-};
-
-&usb3_hs_phy {
-	status = "okay";
-};
-
-&usb2_hs_phy {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "Qxwlan-E2600AC";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "Qxwlan-E2600AC";
-};
diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-ea8300.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-ea8300.dts
deleted file mode 100644
index cfc3037fb2..0000000000
--- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-ea8300.dts
+++ /dev/null
@@ -1,399 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-/*
- * Device Tree Source for Linksys EA8300 (Dallas)
- *
- * Copyright (C) 2019 Jeff Kletsky
- *
- */
-
-/dts-v1/;
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "Linksys EA8300 (Dallas)";
-	compatible = "linksys,ea8300", "qcom,ipq4019";
-
-
-	aliases {
-		led-boot = &led_wps_amber;
-		led-failsafe = &led_wps;
-		led-running = &led_linksys;
-		led-upgrade = &led_world;
-		serial0 = &blsp1_uart1;
-	};
-
-
-	leds {
-		compatible = "gpio-leds";
-
-		// Retain node names from running OEM on EA8300
-
-		// Front panel LEDs, top to bottom
-
-		led_plug: diag {
-			label = "ea8300:amber:plug";
-			gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
-		};
-
-		led_world: internet {
-			label = "ea8300:amber:world";
-			gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
-		};
-
-		led_wps: wps {
-			label = "ea8300:white:wps";
-			gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
-		};
-
-		led_wps_amber: wps_amber {
-			label = "ea8300:amber:wps";
-			gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>;
-			panic-indicator;
-		};
-
-		led_linksys: pwr {
-			label = "ea8300:white:linksys";
-			gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
-		};
-
-		// On back panel, above USB socket
-
-		led_usb: usb {
-			label = "ea8300:green:usb";
-			gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
-			trigger-sources = <&usb3_port1>, <&usb3_port2>,
-					  <&usb2_port1>;
-			linux,default-trigger = "usbport";
-		};
-	};
-
-
-	keys {
-		compatible = "gpio-keys";
-
-		button@0 {
-			label = "reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
-		};
-
-		button@1 {
-			label = "wps";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-
-	//
-	// OEM U-Boot provides either
-	// init=/sbin/init rootfstype=ubifs ubi.mtd=11,2048 \
-	//                 root=ubi0:ubifs rootwait rw
-	// or the same with ubi.mtd=13,2048
-	//
-
-	chosen {
-		bootargs-append = " root=/dev/ubiblock0_0 rootfstype=squashfs ro";
-	};
-
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>;
-	};
-
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		tcsr@194b000 {
-			compatible = "qcom,tcsr";
-			reg = <0x194b000 0x100>;
-			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		usb2@60f8800 {
-			status = "okay";
-
-			dwc3@6000000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				usb2_port1: port@1 {
-					reg = <1>;
-					#trigger-source-cells = <0>;
-				};
-			};
-		};
-
-		usb3@8af8800 {
-			status = "okay";
-
-			dwc3@8a00000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				usb3_port1: port@1 {
-					reg = <1>;
-					#trigger-source-cells = <0>;
-				};
-
-				usb3_port2: port@2 {
-					reg = <2>;
-					#trigger-source-cells = <0>;
-				};
-			};
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-	};
-};
-
-
-&blsp_dma {
-	status = "okay";
-};
-
-&blsp1_uart1 {
-	status = "okay";
-	pinctrl-0 = <&serial_0_pins>;
-	pinctrl-names = "default";
-
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&nand {
-	status = "okay";
-
-	pinctrl-0 = <&nand_pins>;
-	pinctrl-names = "default";
-
-	nand@0 {
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "sbl1";
-				reg = <0x0 0x100000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "mibib";
-				reg = <0x100000 0x100000>;
-				read-only;
-			};
-
-			partition@200000 {
-				label = "qsee";
-				reg = <0x200000 0x100000>;
-				read-only;
-			};
-
-			partition@300000 {
-				label = "cdt";
-				reg = <0x300000 0x80000>;
-				read-only;
-			};
-
-			partition@380000 {
-				label = "appsblenv";
-				reg = <0x380000 0x80000>;
-				read-only;
-			};
-
-			partition@400000 {
-				label = "ART";
-				reg = <0x400000 0x80000>;
-				read-only;
-			};
-
-			partition@480000 {
-				label = "appsbl";
-				reg = <0x480000 0x200000>;
-				read-only;
-			};
-
-			partition@680000 {
-				label = "u_env";
-				reg = <0x680000 0x80000>;
-				// writable -- U-Boot environment
-			};
-
-			partition@700000 {
-				label = "s_env";
-				reg = <0x700000 0x40000>;
-				// writable -- Boot counter records
-			};
-
-			partition@740000 {
-				label = "devinfo";
-				reg = <0x740000 0x40000>;
-				read-only;
-			};
-
-			partition@780000 {
-				label = "kernel";
-				reg = <0x780000 0x5800000>;
-			};
-
-			partition@a80000 {
-				label = "rootfs";
-				reg = <0xa80000 0x5500000>;
-			};
-
-			partition@5f80000 {
-				label = "alt_kernel";
-				reg = <0x5f80000 0x5800000>;
-			};
-
-			partition@6280000 {
-				label = "alt_rootfs";
-				reg = <0x6280000 0x5500000>;
-			};
-
-			partition@b780000 {
-				label = "sysdiag";
-				reg = <0xb780000 0x100000>;
-				read-only;
-			};
-
-			partition@b880000 {
-				label = "syscfg";
-				reg = <0xb880000 0x4680000>;
-				read-only;
-			};
-		};
-	};
-};
-
-&pcie0 {
-	status = "okay";
-
-	perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
-	wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
-
-	bridge@0,0 {
-		reg = <0x00000000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
-		wifi2: wifi@1,0 {
-			compatible = "qcom,ath10k";
-			reg = <0x00010000 0 0 0 0>;
-		};
-	};
-};
-
-&qpic_bam {
-	status = "okay";
-};
-
-&tlmm {
-	serial_0_pins: serial0-pinmux {
-		pins = "gpio16", "gpio17";
-		function = "blsp_uart0";
-		bias-disable;
-	};
-
-	nand_pins: nand_pins {
-		pullups {
-			pins = "gpio53", "gpio58", "gpio59";
-			function = "qpic";
-			bias-pull-up;
-		};
-
-		// gpio61 controls led_usb
-
-		pulldowns {
-			pins =  "gpio55", "gpio56", "gpio57",
-				"gpio60", "gpio62", "gpio63",
-				"gpio64", "gpio65", "gpio66",
-				"gpio67", "gpio68", "gpio69";
-			function = "qpic";
-			bias-pull-down;
-		};
-	};
-};
-
-&usb2_hs_phy {
-	status = "okay";
-};
-
-&usb3_hs_phy {
-	status = "okay";
-};
-
-&usb3_ss_phy {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "linksys-ea8300-fcc";
-};
-
-&wifi1 {
-	status = "okay";
-	ieee80211-freq-limit = <5170000 5330000>;
-	qcom,ath10k-calibration-variant = "linksys-ea8300-fcc";
-};
-
-&wifi2 {
-	status = "okay";
-	ieee80211-freq-limit = <5490000 5835000>;
-	qcom,ath10k-calibration-variant = "linksys-ea8300-fcc";
-};
diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-eap2200.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-eap2200.dts
deleted file mode 100644
index ec3ce447cc..0000000000
--- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-eap2200.dts
+++ /dev/null
@@ -1,282 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "EnGenius EAP2200";
-	compatible = "engenius,eap2200";
-
-	aliases {
-		led-boot = &led_power;
-		led-failsafe = &led_power;
-		led-running = &led_power;
-		led-upgrade = &led_power;
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		wps {
-			label = "wps";
-			gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led_power: power {
-			label = "eap2200:amber:power";
-			gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
-		};
-
-		lan1 {
-			label = "eap2200:blue:lan1";
-			gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
-		};
-
-		lan2 {
-			label = "eap2200:blue:lan2";
-			gpios = <&tlmm 45 GPIO_ACTIVE_LOW>;
-		};
-
-		wlan2g {
-			label = "eap2200:blue:wlan2g";
-			gpios = <&tlmm 46 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "phy0tpt";
-		};
-
-		wlan5g {
-			label = "eap2200:yellow:wlan5g";
-			gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "phy1tpt";
-		};
-
-		wlan5g2 {
-			label = "eap2200:yellow:wlan5g2";
-			gpios = <&tlmm 48 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "phy2tpt";
-		};
-
-		mode {
-			label = "eap2200:blue:mode";
-			gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-			switch_lan_bmp = <0x10>;
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-	};
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&blsp1_spi1 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition0@0 {
-				label = "0:SBL1";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			partition1@40000 {
-				label = "0:MIBIB";
-				reg = <0x00040000 0x00020000>;
-				read-only;
-			};
-			partition2@60000 {
-				label = "0:QSEE";
-				reg = <0x00060000 0x00060000>;
-				read-only;
-			};
-			partition3@c0000 {
-				label = "0:CDT";
-				reg = <0x000c0000 0x00010000>;
-				read-only;
-			};
-			partition4@d0000 {
-				label = "0:DDRPARAMS";
-				reg = <0x000d0000 0x00010000>;
-				read-only;
-			};
-			partition5@e0000 {
-				label = "0:APPSBLENV";
-				reg = <0x000e0000 0x00010000>;
-				read-only;
-			};
-			partition6@f0000 {
-				label = "0:APPSBL";
-				reg = <0x000f0000 0x00080000>;
-				read-only;
-			};
-			partition7@170000 {
-				label = "0:ART";
-				reg = <0x00170000 0x00010000>;
-				read-only;
-			};
-		};
-	};
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&gmac0 {
-	vlan_tag = <1 0x10>;
-};
-
-&nand {
-	pinctrl-0 = <&nand_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	nand@0 {
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "rootfs1";
-				reg = <0x00000000 0x04000000>;
-			};
-			partition@40000000 {
-				label = "ubi";
-				reg = <0x04000000 0x04000000>;
-			};
-
-		};
-	};
-};
-
-&pcie0 {
-	status = "okay";
-	perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
-	wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
-
-	bridge@0,0 {
-		reg = <0x00000000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
-		wifi2: wifi@1,0 {
-			compatible = "qcom,ath10k";
-			reg = <0x00010000 0 0 0 0>;
-			ieee80211-freq-limit = <5470000 5875000>;
-			qcom,ath10k-calibration-variant = "EnGenius-EAP2200";
-		};
-	};
-};
-
-&qpic_bam {
-	status = "okay";
-};
-
-&tlmm {
-	nand_pins: nand_pins {
-		pullups {
-			pins = "gpio53", "gpio58", "gpio59";
-			function = "qpic";
-			bias-pull-up;
-		};
-
-		pulldowns {
-			pins = "gpio54", "gpio55", "gpio56",
-				"gpio57", "gpio60", "gpio61",
-				"gpio62", "gpio63", "gpio64",
-				"gpio65", "gpio66", "gpio67",
-				"gpio68", "gpio69";
-			function = "qpic";
-			bias-pull-down;
-		};
-	};
-
-	serial_0_pins: serial_pinmux {
-		mux {
-			pins = "gpio16", "gpio17";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	spi_0_pins: spi_0_pinmux {
-		pinmux {
-			function = "blsp_spi0";
-			pins = "gpio13", "gpio14", "gpio15";
-			drive-strength = <12>;
-			bias-disable;
-		};
-		pinmux_cs {
-			function = "gpio";
-			pins = "gpio12";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "EnGenius-EAP2200";
-};
-
-&wifi1 {
-	status = "okay";
-	ieee80211-freq-limit = <5170000 5350000>;
-	qcom,ath10k-calibration-variant = "EnGenius-EAP2200";
-};
diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts
deleted file mode 100644
index b04a61dc04..0000000000
--- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts
+++ /dev/null
@@ -1,303 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "AVM FRITZ!Box 7530";
-	compatible = "avm,fritzbox-7530";
-
-	aliases {
-		led-boot = &power_green;
-		led-failsafe = &info_red;
-		led-running = &power_green;
-		led-upgrade = &info_green;
-	};
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		tcsr@194b000 {
-			compatible = "qcom,tcsr";
-			reg = <0x194b000 0x100>;
-			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		usb3@8af8800 {
-			status = "okay";
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-		};
-
-		edma@c080000 {
-			status = "okay";
-			qcom,num_gmac = <1>;
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		wlan {
-			label = "wlan";
-			gpios = <&tlmm 42 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RFKILL>;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&tlmm 41 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-
-		dect {
-			label = "dect";
-			gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_PHONE>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		info_red: info_red {
-			label = "fritzbox-7530:red:info";
-			gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
-		};
-
-		info_green: info {
-			label = "fritzbox-7530:green:info";
-			gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
-		};
-
-		wlan {
-			label = "fritzbox-7530:green:wlan";
-			gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
-		};
-
-		fon {
-			label = "fritzbox-7530:green:fon";
-			gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
-		};
-
-		power_green: power {
-			label = "fritzbox-7530:green:power";
-			gpios = <&tlmm 39 GPIO_ACTIVE_LOW>;
-		};
-
-		wps {
-			label = "fritzbox-7530:green:wps";
-			gpios = <&tlmm 45 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&tlmm {
-	serial_0_pins: serial_pinmux {
-		mux {
-			pins = "gpio16", "gpio17";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	nand_pins: nand_pins {
-		pullups {
-			pins = "gpio53", "gpio58", "gpio59";
-			function = "qpic";
-			bias-pull-up;
-		};
-
-		pulldowns {
-			pins = "gpio54", "gpio55", "gpio56",
-				"gpio57", "gpio60", "gpio61",
-				"gpio62", "gpio63", "gpio64",
-				"gpio65", "gpio66", "gpio67",
-				"gpio68", "gpio69";
-			function = "qpic";
-			bias-pull-down;
-		};
-	};
-
-	usb-power {
-		line-name = "enable USB3 power";
-		gpios = <49 GPIO_ACTIVE_HIGH>;
-		gpio-hog;
-		output-high;
-	};
-};
-
-&nand {
-	pinctrl-0 = <&nand_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	nand@0 {
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "SBL1";
-				reg = <0x000000 0x80000>;
-				read-only;
-			};
-
-			partition@80000 {
-				label = "MIBIB";
-				reg = <0x080000 0x80000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "QSEE";
-				reg = <0x100000 0x80000>;
-				read-only;
-			};
-
-			partition@180000 {
-				label = "CDT";
-				reg = <0x180000 0x40000>;
-				read-only;
-			};
-
-			partition@1c0000 {
-				label = "QSEE_B";
-				reg = <0x1c0000 0x80000>;
-				read-only;
-			};
-
-			partition@240000 {
-				label = "urlader0";
-				reg = <0x240000 0x40000>;
-				read-only;
-			};
-
-			partition@280000 {
-				label = "urlader1";
-				reg = <0x280000 0x40000>;
-				read-only;
-			};
-
-			partition@2c0000 {
-				label = "nand-tffs";
-				reg = <0x2c0000 0x840000>;
-				read-only;
-			};
-
-			partition@b00000 {
-				/* 'kernel1' in AVM firmware */
-				label = "uboot0";
-				reg = <0xb00000 0x400000>;
-			};
-
-			partition@f00000 {
-				/* 'kernel2' in AVM firmware */
-				label = "uboot1";
-				reg = <0xf00000 0x400000>;
-			};
-
-			partition@1300000 {
-				label = "ubi";
-				reg = <0x1300000 0x6d00000>;
-			};
-		};
-	};
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&usb3_ss_phy {
-	status = "okay";
-};
-
-&usb3_hs_phy {
-	status = "okay";
-};
-
-&qpic_bam {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "AVM-FRITZBox-7530";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "AVM-FRITZBox-7530";
-};
-
-&pcie0 {
-	status = "okay";
-
-	perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
-	wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
-
-	bridge@0,0 {
-		reg = <0x00000000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
-		dsl@1,0 {
-			compatible = "intel,vrx518";
-			status = "okay";
-			reg = <0x00010000 0 0 0 0>;
-		};
-	};
-};
diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts
deleted file mode 100644
index e9b96b996a..0000000000
--- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts
+++ /dev/null
@@ -1,267 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "AVM FRITZ!Repeater 1200";
-	compatible = "avm,fritzrepeater-1200";
-
-	aliases {
-		led-boot = &power_green;
-		led-failsafe = &power_red;
-		led-running = &power_green;
-		led-upgrade = &power_red;
-		label-mac-device = &wifi0;
-	};
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-			pinctrl-0 = <&mdio_pins>;
-			pinctrl-names = "default";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII_RGMII5>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			switch_mac_mode = <0x3>; /* mac mode for RGMII RMII */
-			switch_lan_bmp = <0x0>; /* lan port bitmap */
-			switch_wan_bmp = <0x10>; /* wan port bitmap */
-		};
-
-		edma@c080000 {
-			status = "okay";
-			phy-mode = "rgmii-rxid";
-			qcom,num_gmac = <1>;
-			qcom,single-phy;
-		};
-	};
-
-	key {
-		compatible = "gpio-keys";
-
-		wps {
-			label = "WPS button";
-			gpios = <&tlmm 10 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		power_red: power_red {
-			label = "fritzwlan-1200:red:power";
-			gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
-		};
-
-		power_green: power_green {
-			label = "fritzwlan-1200:green:power";
-			gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
-		};
-
-		power_yellow {
-			label = "fritzwlan-1200:yellow:power";
-			gpios = <&tlmm 49 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&tlmm {
-	serial_0_pins: serial_pinmux {
-		mux {
-			pins = "gpio16", "gpio17";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	nand_pins: nand_pins {
-		pullups {
-			pins = "gpio53", "gpio58", "gpio59";
-			function = "qpic";
-			bias-pull-up;
-		};
-
-		pulldowns {
-			pins = "gpio54", "gpio55", "gpio56",
-				"gpio57", "gpio60", "gpio61",
-				"gpio62", "gpio63", "gpio64",
-				"gpio65", "gpio66", "gpio67",
-				"gpio68", "gpio69";
-			function = "qpic";
-			bias-pull-down;
-		};
-	};
-
-	mdio_pins: mdio_pinmux {
-		mux_1 {
-			pins = "gpio6";
-			function = "mdio";
-			bias-pull-up;
-		};
-		mux_2 {
-			pins = "gpio7";
-			function = "mdc";
-			bias-pull-up;
-		};
-	};
-
-	phy-reset {
-		line-name = "PHY-reset";
-		gpios = <19 GPIO_ACTIVE_HIGH>;
-		gpio-hog;
-		output-high;
-	};
-
-	phy-reset-2 {
-		line-name = "PHY-reset-2";
-		gpios = <47 GPIO_ACTIVE_HIGH>;
-		gpio-hog;
-		output-high;
-	};
-};
-
-&nand {
-	pinctrl-0 = <&nand_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	nand@0 {
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "SBL1";
-				reg = <0x0 0x80000>;
-				read-only;
-			};
-
-			partition@80000 {
-				label = "MIBIB";
-				reg = <0x80000 0x80000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "QSEE";
-				reg = <0x100000 0x80000>;
-				read-only;
-			};
-
-			partition@180000 {
-				label = "CDT";
-				reg = <0x180000 0x40000>;
-				read-only;
-			};
-
-			partition@1c0000 {
-				label = "QSEE_B";
-				reg = <0x1c0000 0x80000>;
-				read-only;
-			};
-
-			partition@240000 {
-				label = "urlader0";
-				reg = <0x240000 0x40000>;
-				read-only;
-			};
-
-			partition@280000 {
-				label = "urlader1";
-				reg = <0x280000 0x40000>;
-				read-only;
-			};
-
-			partition@2c0000 {
-				label = "nand-tffs";
-				reg = <0x2c0000 0x840000>;
-				read-only;
-			};
-
-			partition@b00000 {
-				/* 'kernel1' in AVM firmware */
-				label = "uboot0";
-				reg = <0xb00000 0x400000>;
-			};
-
-			partition@f00000 {
-				/* 'kernel2' in AVM firmware */
-				label = "uboot1";
-				reg = <0xf00000 0x400000>;
-			};
-
-			partition@1300000 {
-				label = "ubi";
-				reg = <0x1300000 0x6d00000>;
-			};
-		};
-	};
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&qpic_bam {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-1200";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-1200";
-};
-
-&gmac0 {
-	qcom,phy_mdio_addr = <0>;
-	qcom,poll_required = <1>;
-	vlan_tag = <0 0x20>;
-};
diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts
deleted file mode 100644
index 6914917eb3..0000000000
--- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts
+++ /dev/null
@@ -1,264 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "AVM FRITZ!Repeater 3000";
-	compatible = "avm,fritzrepeater-3000";
-
-	aliases {
-		led-boot = &power_led;
-		led-failsafe = &power_led;
-		led-running = &power_led;
-		led-upgrade = &power_led;
-	};
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-
-			switch_lan_bmp = <0x10>;
-			switch_wan_bmp = <0x20>;
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-	};
-
-	key {
-		compatible = "gpio-keys";
-
-		connect {
-			label = "Connect";
-			gpios = <&tlmm 10 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		connect_red {
-			label = "fritzwlan-3000:red:connect";
-			gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
-		};
-
-		connect_green {
-			label = "fritzwlan-3000:green:connect";
-			gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
-		};
-
-		connect_blue {
-			label = "fritzwlan-3000:blue:connect";
-			gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
-		};
-
-		power_led: power {
-			label = "fritzwlan-3000:green:power";
-			gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&tlmm {
-	serial_0_pins: serial_pinmux {
-		mux {
-			pins = "gpio16", "gpio17";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	nand_pins: nand_pins {
-		pullups {
-			pins = "gpio53", "gpio58", "gpio59";
-			function = "qpic";
-			bias-pull-up;
-		};
-
-		pulldowns {
-			pins = "gpio54", "gpio55", "gpio56",
-				"gpio57", "gpio60", "gpio61",
-				"gpio62", "gpio63", "gpio64",
-				"gpio65", "gpio66", "gpio67",
-				"gpio68", "gpio69";
-			function = "qpic";
-			bias-pull-down;
-		};
-	};
-};
-
-&nand {
-	pinctrl-0 = <&nand_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	nand@0 {
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "SBL1";
-				reg = <0x000000 0x80000>;
-				read-only;
-			};
-
-			partition@80000 {
-				label = "MIBIB";
-				reg = <0x080000 0x80000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "QSEE";
-				reg = <0x100000 0x80000>;
-				read-only;
-			};
-
-			partition@180000 {
-				label = "CDT";
-				reg = <0x180000 0x40000>;
-				read-only;
-			};
-
-			partition@1c0000 {
-				label = "QSEE_B";
-				reg = <0x1c0000 0x80000>;
-				read-only;
-			};
-
-			partition@240000 {
-				label = "urlader0";
-				reg = <0x240000 0x40000>;
-				read-only;
-			};
-
-			partition@280000 {
-				label = "urlader1";
-				reg = <0x280000 0x40000>;
-				read-only;
-			};
-
-			partition@2c0000 {
-				label = "nand-tffs";
-				reg = <0x2c0000 0x840000>;
-				read-only;
-			};
-
-			partition@b00000 {
-				/* 'kernel1' in AVM firmware */
-				label = "uboot0";
-				reg = <0xb00000 0x400000>;
-			};
-
-			partition@f00000 {
-				/* 'kernel2' in AVM firmware */
-				label = "uboot1";
-				reg = <0xf00000 0x400000>;
-			};
-
-			partition@1300000 {
-				label = "ubi";
-				reg = <0x1300000 0x6d00000>;
-			};
-		};
-	};
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&qpic_bam {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-	/* BDFs are identical for the FRITZ!Box 7530 and the FRITZ!Repeater 3000 */
-	qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-3000";
-};
-
-&wifi1 {
-	status = "okay";
-	ieee80211-freq-limit = <5170000 5350000>;
-	/* BDFs are identical for the FRITZ!Box 7530 and the FRITZ!Repeater 3000 */
-	qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-3000";
-};
-
-&pcie0 {
-	status = "okay";
-
-	perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>;
-	wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
-
-	bridge@0,0 {
-		reg = <0x00000000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
-		wifi@1,0 {
-			/* QCA9984 */
-			compatible = "qcom,ath10k";
-			status = "okay";
-			reg = <0x00010000 0 0 0 0>;
-			ieee80211-freq-limit = <5470000 5875000>;
-			/* Uses the reference BDF */
-		};
-	};
-};
diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts
deleted file mode 100644
index 8fe7644a9b..0000000000
--- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts
+++ /dev/null
@@ -1,357 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/* Copyright (c) 2019, Robert Marko <robimarko@gmail.com> */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "8devices Habanero DVK";
-	compatible = "8dev,habanero-dvk";
-
-	aliases {
-		led-boot = &led_status;
-		led-failsafe = &led_status;
-		led-running = &led_status;
-		led-upgrade = &led_upgrade;
-	};
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-
-			pinctrl-0 = <&mdio_pins>;
-			pinctrl-names = "default";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		counter@4a1000 {
-			compatible = "qcom,qca-gcnt";
-			reg = <0x4a1000 0x4>;
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		tcsr@194b000 {
-			status = "okay";
-
-			compatible = "qcom,tcsr";
-			reg = <0x194b000 0x100>;
-			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		usb2: usb2@60f8800 {
-			status = "okay";
-		};
-
-		usb3: usb3@8af8800 {
-			status = "okay";
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led_status: status {
-			label = "habanero-dvk:green:status";
-			gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
-			panic-indicator;
-		};
-
-		led_upgrade: upgrade {
-			label = "habanero-dvk:green:upgrade";
-			gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan2g {
-			label = "habanero-dvk:green:wlan2g";
-			gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "phy0tpt";
-		};
-
-		wlan5g {
-			label = "habanero-dvk:green:wlan5g";
-			gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "phy1tpt";
-		};
-	};
-};
-
-&vqmmc {
-	status = "okay";
-};
-
-&sdhci {
-	status = "okay";
-
-	pinctrl-0 = <&sd_pins>;
-	pinctrl-names = "default";
-	cd-gpios = <&tlmm 22 GPIO_ACTIVE_LOW>;
-	vqmmc-supply = <&vqmmc>;
-};
-
-&qpic_bam {
-	status = "okay";
-};
-
-&tlmm {
-	mdio_pins: mdio_pinmux {
-		mux_1 {
-			pins = "gpio6";
-			function = "mdio";
-			bias-pull-up;
-		};
-
-		mux_2 {
-			pins = "gpio7";
-			function = "mdc";
-			bias-pull-up;
-		};
-	};
-
-	serial_pins: serial_pinmux {
-		mux {
-			pins = "gpio16", "gpio17";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	spi_0_pins: spi_0_pinmux {
-		pinmux {
-			function = "blsp_spi0";
-			pins = "gpio13", "gpio14", "gpio15";
-			drive-strength = <12>;
-			bias-disable;
-		};
-
-		pinmux_cs {
-			function = "gpio";
-			pins = "gpio12";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-
-	nand_pins: nand_pins {
-		pullups {
-			pins =  "gpio52", "gpio53", "gpio58", "gpio59";
-			function = "qpic";
-			bias-pull-up;
-		};
-
-		pulldowns {
-			pins = "gpio54", "gpio55", "gpio56", "gpio57",
-				"gpio60", "gpio62", "gpio63", "gpio64",
-				"gpio65", "gpio66", "gpio67", "gpio68",
-				"gpio69";
-			function = "qpic";
-			bias-pull-down;
-		};
-	};
-
-	sd_pins: sd_pins {
-		pinmux {
-			function = "sdio";
-			pins = "gpio23", "gpio24", "gpio25", "gpio26",
-				"gpio28", "gpio29", "gpio30", "gpio31";
-			drive-strength = <10>;
-		};
-
-		pinmux_sd_clk {
-			function = "sdio";
-			pins = "gpio27";
-			drive-strength = <16>;
-		};
-
-		pinmux_sd7 {
-			function = "sdio";
-			pins = "gpio32";
-			drive-strength = <10>;
-			bias-disable;
-		};
-	};
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&blsp1_spi1 {
-	status = "okay";
-
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		spi-max-frequency = <24000000>;
-		reg = <0>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "SBL1";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			partition@40000 {
-				label = "MIBIB";
-				reg = <0x00040000 0x00020000>;
-				read-only;
-			};
-			partition@60000 {
-				label = "QSEE";
-				reg = <0x00060000 0x00060000>;
-				read-only;
-			};
-			partition@c0000 {
-				label = "CDT";
-				reg = <0x000c0000 0x00010000>;
-				read-only;
-			};
-			partition@d0000 {
-				label = "DDRPARAMS";
-				reg = <0x000d0000 0x00010000>;
-				read-only;
-			};
-			partition@e0000 {
-				label = "APPSBLENV"; /* uboot env */
-				reg = <0x000e0000 0x00010000>;
-				read-only;
-			};
-			partition@f0000 {
-				label = "APPSBL"; /* uboot */
-				reg = <0x000f0000 0x00080000>;
-				read-only;
-			};
-			partition@170000 {
-				label = "ART";
-				reg = <0x00170000 0x00010000>;
-				read-only;
-			};
-			partition@180000 {
-				label = "cfg";
-				reg = <0x00180000 0x00040000>;
-			};
-			partition@1c0000 {
-				label = "firmware";
-				compatible = "denx,fit";
-				reg = <0x001c0000 0x01e40000>;
-			};
-		};
-	};
-};
-
-/* Some DVK boards ship without NAND */
-&nand {
-	status = "okay";
-
-	pinctrl-0 = <&nand_pins>;
-	pinctrl-names = "default";
-};
-
-&blsp1_uart1 {
-	status = "okay";
-
-	pinctrl-0 = <&serial_pins>;
-	pinctrl-names = "default";
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-
-	perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
-	wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
-
-	/* Free slot for use */
-	bridge@0,0 {
-		reg = <0x00000000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-	};
-};
-
-&wifi0 {
-	status = "okay";
-
-	qcom,ath10k-calibration-variant = "8devices-Habanero";
-};
-
-&wifi1 {
-	status = "okay";
-
-	qcom,ath10k-calibration-variant = "8devices-Habanero";
-};
-
-&usb3_ss_phy {
-	status = "okay";
-};
-
-&usb3_hs_phy {
-	status = "okay";
-};
-
-&usb2_hs_phy {
-	status = "okay";
-};
diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts
deleted file mode 100644
index a063f8e952..0000000000
--- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts
+++ /dev/null
@@ -1,311 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-/dts-v1/;
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "ASUS Lyra MAP-AC2200";
-	compatible = "asus,map-ac2200";
-
-	aliases {
-		led-boot = &led_blue0;
-		led-failsafe = &led_red0;
-		led-running = &led_blue0;
-		led-upgrade = &led_red0;
-	};
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		usb2@60f8800 {
-			status = "okay";
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-	};
-};
-
-&nand {
-	pinctrl-0 = <&nand_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	nand@0 {
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "SBL1";
-				reg = <0x0 0x80000>;
-				read-only;
-			};
-
-			partition@80000 {
-				label = "MIBIB";
-				reg = <0x80000 0x80000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "QSEE";
-				reg = <0x100000 0x100000>;
-				read-only;
-			};
-
-			partition@200000 {
-				label = "CDT";
-				reg = <0x200000 0x80000>;
-				read-only;
-			};
-
-			partition@280000 {
-				label = "APPSBL";
-				reg = <0x280000 0x140000>;
-				read-only;
-			};
-
-			partition@3c0000 {
-				label = "APPSBLENV";
-				reg = <0x3c0000 0x40000>;
-				read-only;
-			};
-
-			partition@400000 {
-				label = "ubi";
-				reg = <0x400000 0x7c00000>;
-			};
-		};
-	};
-};
-
-&tlmm {
-	i2c_0_pins: i2c_0_pinmux {
-		pinmux {
-			function = "blsp_i2c0";
-			pins = "gpio20", "gpio21";
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-
-	serial_pins: serial_pinmux {
-		mux {
-			pins = "gpio16", "gpio17";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	nand_pins: nand_pins {
-		pullups {
-			pins =	"gpio52", "gpio53", "gpio58",
-				"gpio59";
-			function = "qpic";
-			bias-pull-up;
-		};
-
-		pulldowns {
-			pins =	"gpio54", "gpio55", "gpio56",
-				"gpio57", "gpio60", "gpio61",
-				"gpio62", "gpio63", "gpio64",
-				"gpio65", "gpio66", "gpio67",
-				"gpio68", "gpio69";
-			function = "qpic";
-			bias-pull-down;
-		};
-	};
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&qpic_bam {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200";
-	ieee80211-freq-limit = <5470000 5875000>;
-};
-
-&pcie0 {
-	status = "okay";
-	perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
-	wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
-
-	bridge@0,0 {
-		reg = <0x00000000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
-		wifi2: wifi@1,0 {
-			compatible = "qcom,ath10k";
-			status = "okay";
-			reg = <0x00010000 0 0 0 0>;
-			qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200";
-			ieee80211-freq-limit = <5170000 5350000>;
-		};
-	};
-};
-
-&usb2_hs_phy {
-	/* Bluetooth module attached via USB */
-	status = "okay";
-};
-
-&blsp1_i2c3 {
-	pinctrl-0 = <&i2c_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	led-controller@32 {
-		/* 9-channel RGB LED controller */
-		compatible = "national,lp5523";
-		reg = <0x32>;
-		clock-mode = [01];
-
-		led_blue0: blue0 {
-			chan-name = "blue0";
-			label = "map-ac2200:blue:chan0";
-			led-cur = [fa];
-			max-cur = [ff];
-		};
-
-		blue1 {
-			chan-name = "blue1";
-			label = "map-ac2200:blue:chan1";
-			led-cur = [fa];
-			max-cur = [ff];
-		};
-
-		blue2 {
-			chan-name = "blue2";
-			label = "map-ac2200:blue:chan2";
-			led-cur = [fa];
-			max-cur = [ff];
-		};
-
-		led_green0: green0 {
-			chan-name = "green0";
-			label = "map-ac2200:green:chan0";
-			led-cur = [fa];
-			max-cur = [ff];
-		};
-
-		green1 {
-			chan-name = "green1";
-			label = "map-ac2200:green:chan1";
-			led-cur = [fa];
-			max-cur = [ff];
-		};
-
-		green2 {
-			chan-name = "green2";
-			label = "map-ac2200:green:chan2";
-			led-cur = [fa];
-			max-cur = [ff];
-		};
-
-		led_red0: red0 {
-			chan-name = "red0";
-			label = "map-ac2200:red:chan0";
-			led-cur = [fa];
-			max-cur = [ff];
-		};
-
-		red1 {
-			chan-name = "red1";
-			label = "map-ac2200:red:chan1";
-			led-cur = [fa];
-			max-cur = [ff];
-		};
-
-		red2 {
-			chan-name = "red2";
-			label = "map-ac2200:red:chan2";
-			led-cur = [fa];
-			max-cur = [ff];
-		};
-	};
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-rtl30vw.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-rtl30vw.dts
deleted file mode 100644
index 2f17424e55..0000000000
--- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-rtl30vw.dts
+++ /dev/null
@@ -1,385 +0,0 @@
-// SPDX-License-Identifier: ISC
-// Copyright (c) 2015, The Linux Foundation. All rights reserved.
-// Copyright (c) 2019, Cezary Jackiewicz <cezary@eko.one.pl>.
-// Copyright (c) 2020, Pawel Dembicki <paweldembicki@gmail.com>.
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/soc/qcom,tcsr.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Cell C RTL30VW";
-	compatible = "cellc,rtl30vw";
-
-	aliases {
-		led-boot = &led_power_blue;
-		led-failsafe = &led_power_red;
-		led-running = &led_power_blue;
-		led-upgrade = &led_power_red;
-	};
-
-	chosen {
-		bootargs-append = "ubi.mtd=ubifs root=/dev/ubiblock0_0 rootfstype=squashfs ro";
-	};
-
-	led_spi {
-		compatible = "spi-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		num-chipselects = <1>;
-
-		mosi-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
-		cs-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
-		sck-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
-
-		led_gpio: led_gpio@0 {
-			compatible = "fairchild,74hc595";
-			reg = <0>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			registers-number = <2>;
-			spi-max-frequency = <1000000>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led_power_blue: power_blue {
-			gpios = <&led_gpio 0 GPIO_ACTIVE_HIGH>;
-			label = "rtl30vw:blue:power";
-			default-state = "on";
-		};
-
-		led_power_red: power_red {
-			gpios = <&led_gpio 1 GPIO_ACTIVE_HIGH>;
-			label = "rtl30vw:red:power";
-		};
-
-		tp28 {
-			gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
-			label = "rtl30vw:ext:tp28";
-			default-state = "keep";
-		};
-
-		tp27 {
-			gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
-			label = "rtl30vw:ext:tp27";
-			default-state = "keep";
-		};
-
-		wlan2g {
-			gpios = <&led_gpio 8 GPIO_ACTIVE_HIGH>;
-			label = "rtl30vw:blue:wlan2g";
-			linux,default-trigger = "phy0tpt";
-		};
-
-		wlan5g {
-			gpios = <&led_gpio 9 GPIO_ACTIVE_HIGH>;
-			label = "rtl30vw:blue:wlan5g";
-			linux,default-trigger = "phy1tpt";
-		};
-
-		wps {
-			gpios = <&led_gpio 10 GPIO_ACTIVE_HIGH>;
-			label = "rtl30vw:blue:wps";
-		};
-
-		voip {
-			gpios = <&led_gpio 11 GPIO_ACTIVE_HIGH>;
-			label = "rtl30vw:blue:voip";
-		};
-
-		s1 {
-			gpios = <&led_gpio 12 GPIO_ACTIVE_HIGH>;
-			label = "rtl30vw:blue:s1";
-		};
-
-		s2 {
-			gpios = <&led_gpio 13 GPIO_ACTIVE_HIGH>;
-			label = "rtl30vw:blue:s2";
-		};
-
-		s3 {
-			gpios = <&led_gpio 14 GPIO_ACTIVE_HIGH>;
-			label = "rtl30vw:blue:s3";
-		};
-
-		s4 {
-			gpios = <&led_gpio 15 GPIO_ACTIVE_HIGH>;
-			label = "rtl30vw:blue:s4";
-		};
-
-		signal {
-			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
-			label = "rtl30vw:red:signal";
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		wps {
-			label = "wps";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
-		};
-
-		reset {
-			label = "reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		tcsr@194b000 {
-			/* select hostmode */
-			compatible = "qcom,tcsr";
-			reg = <0x194b000 0x100>;
-			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-			status = "okay";
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		usb2@60f8800 {
-			status = "okay";
-		};
-
-		usb3@8af8800 {
-			status = "okay";
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-	};
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&blsp1_spi1 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>;
-
-	flash@0 {
-		/*"n25q128a11" is required for proper nand recognition in u-boot. */
-		compatible = "jedec,spi-nor", "n25q128a11";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "0:SBL1";
-				reg = <0x0 0x40000>;
-				read-only;
-			};
-
-			partition@40000 {
-				label = "0:MIBIB";
-				reg = <0x40000 0x20000>;
-				read-only;
-			};
-
-			partition@60000 {
-				label = "0:QSEE";
-				reg = <0x60000 0x60000>;
-				read-only;
-				};
-
-			partition@c0000 {
-				label = "0:CDT";
-				reg = <0xc0000 0x10000>;
-				read-only;
-			};
-
-			partition@d0000 {
-				label = "0:DDRPARAMS";
-				reg = <0xd0000 0x10000>;
-				read-only;
-			};
-
-			partition@e0000 {
-				label = "0:APPSBLENV";
-				reg = <0xe0000 0x10000>;
-				read-only;
-			};
-
-			partition@f0000 {
-				label = "0:APPSBL";
-				reg = <0xf0000 0x80000>;
-				read-only;
-			};
-
-			partition@170000 {
-				label = "0:ART";
-				reg = <0x170000 0x10000>;
-				read-only;
-			};
-
-			partition@180000 {
-				label = "0:BOOTCONFIG";
-				reg = <0x180000 0x10000>;
-				read-only;
-			};
-		};
-	};
-
-	flash@1 {
-		/*
-		 * Factory U-boot looks in 0:BOOTCONFIG partition for active
-		 * partitions settings and mangle partition config. So kernel
-		 * /kernel_1 and rootfs/rootfs_1 pairs can be swaped.
-		 * It isn't a problem but we never can be sure where OFW put
-		 * factory images. "spinand,mt29f" value is required for proper
-		 * nand recognition in u-boot.
-		 */
-		compatible = "spi-nand","spinand,mt29f";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <1>;
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "kernel";
-				reg = <0x0 0x400000>;
-			};
-
-			partition@400000 {
-				label = "rootfs";
-				reg = <0x400000 0x2000000>;
-			};
-
-			partition@2400000 {
-				label = "kernel_1";
-				reg = <0x2400000 0x400000>;
-			};
-
-			partition@2800000 {
-				label = "rootfs_1";
-				reg = <0x2800000 0x2000000>;
-			};
-
-			partition@4800000 {
-				label = "ubifs";
-				reg = <0x4800000 0x3800000>;
-			};
-		};
-	};
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&tlmm {
-	serial_pins: serial_pinmux {
-		mux {
-			pins = "gpio60", "gpio61";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	spi_0_pins: spi_0_pinmux {
-		pinmux {
-			function = "blsp_spi0";
-			pins = "gpio55", "gpio56", "gpio57";
-			drive-strength = <12>;
-			bias-disable;
-		};
-
-		pinmux_cs {
-			function = "gpio";
-			pins = "gpio54", "gpio59";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-};
-
-&usb2_hs_phy {
-	status = "okay";
-};
-
-&usb3_ss_phy {
-	status = "okay";
-};
-
-&usb3_hs_phy {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "cellc,rtl30vw";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "cellc,rtl30vw";
-};
diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-u4019-32m.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-u4019-32m.dts
deleted file mode 100644
index 63fbfb65c1..0000000000
--- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-u4019-32m.dts
+++ /dev/null
@@ -1,79 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-/dts-v1/;
-
-#include "qcom-ipq4019-u4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Unielec U4019 (32M)";
-	compatible = "unielec,u4019-32m","unielec,u4019","qcom,ipq4019";
-};
-
-&blsp1_spi1 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
-
-	flash@0 {
-		reg = <0>;
-		compatible = "jedec,spi-nor";
-		spi-max-frequency = <24000000>;
-		broken-flash-reset;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "0:SBL1";
-				reg = <0x0 0x40000>;
-				read-only;
-			};
-			partition@40000 {
-				label = "0:MIBIB";
-				reg = <0x40000 0x20000>;
-				read-only;
-			};
-			partition@60000 {
-				label = "0:QSEE";
-				reg = <0x60000 0x60000>;
-				read-only;
-			};
-			partition@c0000 {
-				label = "0:CDT";
-				reg = <0xc0000 0x10000>;
-				read-only;
-			};
-			partition@d0000 {
-				label = "0:DDRPARAMS";
-				reg = <0xd0000 0x10000>;
-				read-only;
-			};
-			partition@e0000 {
-				label = "0:APPSBLENV";
-				reg = <0xe0000 0x10000>;
-				read-only;
-			};
-			partition@f0000 {
-				label = "0:APPSBL";
-				reg = <0xf0000 0x80000>;
-				read-only;
-			};
-			partition@170000 {
-				label = "0:ART";
-				reg = <0x170000 0x10000>;
-				read-only;
-			};
-			partition@180000 {
-				compatible = "denx,fit";
-				label = "firmware";
-				reg = <0x180000 0x1e80000>;
-			};
-		};
-	};
-};
-
diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-u4019.dtsi b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-u4019.dtsi
deleted file mode 100644
index c768e25ca0..0000000000
--- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-u4019.dtsi
+++ /dev/null
@@ -1,224 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	compatible = "unielec,u4019","qcom,ipq4019";
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-			pinctrl-0 = <&mdio_pins>;
-			pinctrl-names = "default";
-			reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
-			reset-delay-us = <2000>;
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		tcsr@194b000 {
-			compatible = "qcom,tcsr";
-			reg = <0x194b000 0x100>;
-			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-			status = "okay";
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		usb2@60f8800 {
-			status = "okay";
-
-			dwc3@6000000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@1 {
-					reg = <1>;
-					#trigger-source-cells = <0>;
-				};
-			};
-		};
-
-		usb3@8af8800 {
-			status = "okay";
-
-			dwc3@8a00000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@1 {
-					reg = <1>;
-					#trigger-source-cells = <0>;
-				};
-
-				port@2 {
-					reg = <2>;
-					#trigger-source-cells = <0>;
-				};
-			};
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-
-		aliases {
-			led-boot = &led_status;
-			led-failsafe = &led_status;
-			led-running = &led_status;
-			led-upgrade = &led_status;
-			serial0 = &blsp1_uart1;
-			serial1 = &blsp1_uart2;
-		};
-
-		leds {
-			compatible = "gpio-leds";
-			pinctrl-0 = <&led_pins>;
-			pinctrl-names = "default";
-
-			led_status: led2 {
-				label = "u4019:green:led2";
-				gpios = <&tlmm 68 GPIO_ACTIVE_LOW>;
-			};
-		};
-
-		keys {
-			compatible = "gpio-keys";
-
-			reset {
-				label = "reset";
-				gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
-				linux,code = <KEY_RESTART>;
-			};
-		};
-	};
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&blsp1_uart2 {
-	pinctrl-0 = <&serial_1_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&qpic_bam {
-	status = "okay";
-};
-
-&tlmm {
-	mdio_pins: mdio_pinmux {
-		mux_1 {
-			pins = "gpio6";
-			function = "mdio";
-			bias-pull-up;
-		};
-		mux_2 {
-			pins = "gpio7";
-			function = "mdc";
-			bias-pull-up;
-		};
-	};
-
-	serial_0_pins: serial0-pinmux {
-		mux {
-			pins = "gpio16", "gpio17";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-	serial_1_pins: serial1_pinmux {
-		mux {
-			pins = "gpio8", "gpio9";
-			function = "blsp_uart1";
-			bias-disable;
-		};
-	};
-
-	spi_0_pins: spi_0_pinmux {
-		pinmux {
-			function = "blsp_spi0";
-			pins = "gpio13", "gpio14", "gpio15";
-			drive-strength = <12>;
-			bias-disable;
-		};
-
-		pinmux_cs {
-			function = "gpio";
-			pins = "gpio12";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-
-	led_pins: led_pinmux {
-		mux {
-			function = "gpio";
-			pins = "gpio68";
-			bias-disabled;
-			output-low;
-		};
-	};
-};
-
-&usb3_ss_phy {
-	status = "okay";
-};
-
-&usb3_hs_phy {
-	status = "okay";
-};
-
-&usb2_hs_phy {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-};
-
-&wifi1 {
-	status = "okay";
-};
diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts
deleted file mode 100644
index 3a0e0b8cfa..0000000000
--- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts
+++ /dev/null
@@ -1,375 +0,0 @@
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- * Copyright (c) 2019, Nguyen Dinh Phi <phi_nguyen@compex.com.sg>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "Compex WPJ419";
-	compatible = "compex,wpj419", "qcom,ipq4019";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>;
-	};
-
-	reserved-memory {
-		ranges;
-		rsvd1@87000000 {
-			/* Reserved for other subsystem */
-			reg = <0x87000000 0x500000>;
-			no-map;
-		};
-		wifi_dump@87500000 {
-			reg = <0x87500000 0x600000>;
-			no-map;
-		};
-
-		rsvd2@87B00000 {
-			/* Reserved for other subsystem */
-			reg = <0x87B00000 0x500000>;
-			no-map;
-		};
-	};
-
-	chosen {
-		bootargs-append = " ubi.mtd=ubi root=/dev/ubiblock0_1 clk_ignore_unused";
-	};
-
-	soc {
-		pinctrl@1000000 {
-			mdio_pins: mdio_pinmux {
-				mux_1 {
-					pins = "gpio6";
-					function = "mdio";
-					bias-pull-up;
-				};
-
-				mux_2 {
-					pins = "gpio7";
-					function = "mdc";
-					bias-pull-up;
-				};
-			};
-
-			serial_0_pins: serial_pinmux {
-				mux {
-					pins = "gpio16", "gpio17";
-					function = "blsp_uart0";
-					bias-disable;
-				};
-			};
-
-			serial_1_pins: serial1_pinmux {
-				mux {
-					pins = "gpio8", "gpio9", "gpio10", "gpio11";
-					function = "blsp_uart1";
-					bias-disable;
-				};
-			};
-
-			spi_0_pins: spi_0_pinmux {
-				pinmux {
-					function = "blsp_spi0";
-					pins = "gpio13", "gpio14", "gpio15";
-					bias-disable;
-				};
-
-				pinmux_cs {
-					function = "gpio";
-					pins = "gpio12";
-					bias-disable;
-					output-high;
-				};
-			};
-
-			i2c_0_pins: i2c_0_pinmux {
-				mux {
-					pins = "gpio20", "gpio21";
-					function = "blsp_i2c0";
-					bias-disable;
-				};
-			};
-
-			nand_pins: nand_pins {
-				pullups {
-					pins = "gpio52", "gpio53", "gpio58", "gpio59";
-					function = "qpic";
-					bias-pull-up;
-				};
-
-				pulldowns {
-					pins = "gpio54", "gpio55", "gpio56",
-					"gpio57", "gpio60", "gpio61",
-					"gpio62", "gpio63", "gpio64",
-					"gpio65", "gpio66", "gpio67",
-					"gpio68", "gpio69";
-					function = "qpic";
-					bias-pull-down;
-				};
-			};
-
-			led_0_pins: led0_pinmux {
-				mux_1 {
-					pins = "gpio36";
-					function = "led0";
-					bias-pull-down;
-				};
-				mux_2 {
-					pins = "gpio40";
-					function = "led4";
-					bias-pull-down;
-				};
-			};
-		};
-
-		blsp_dma: dma@7884000 {
-			status = "okay";
-		};
-
-		spi_0: spi@78b5000 {
-			pinctrl-0 = <&spi_0_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-			cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>, <&tlmm 41 GPIO_ACTIVE_HIGH>;
-			num-cs = <2>;
-
-			flash0@0 {
-				reg = <0>;
-				compatible = "jedec,spi-nor";
-				spi-max-frequency = <24000000>;
-				broken-flash-reset;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "0:SBL1";
-						reg = <0x000000 0x040000>;
-						read-only;
-					};
-
-					partition@40000 {
-						label = "0:MIBIB";
-						reg = <0x040000 0x020000>;
-						read-only;
-					};
-
-					partition@60000 {
-						label = "0:QSEE";
-						reg = <0x060000 0x060000>;
-						read-only;
-					};
-
-					partition@c0000 {
-						label = "0:CDT";
-						reg = <0x0c0000 0x010000>;
-						read-only;
-					};
-
-					partition@d0000 {
-						label = "0:DDRPARAMS";
-						reg = <0x0d0000 0x010000>;
-						read-only;
-					};
-
-					partition@e0000 {
-						label = "u-boot-env";
-						reg = <0x0e0000 0x010000>;
-					};
-
-					partition@f0000 {
-						label = "u-boot";
-						reg = <0x0f0000 0x080000>;
-						read-only;
-					};
-
-					partition@170000 {
-						label = "0:ART";
-						reg = <0x170000 0x010000>;
-						read-only;
-					};
-				};
-			};
-
-			nand@1 {
-				reg = <1>;
-				status = "okay";
-				compatible = "spi-nand";
-				spi-max-frequency = <24000000>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					/* The device has 128MB, but we can only address
-					 * 64MB because of the bootloader's default settings.
-					 * This is due to the old mt29f driver,
-					 * which detected the deivce with only 64MB
-					 */
-					partition@0 {
-						label = "ubi";
-						reg = <0x0000000 0x4000000>;
-					};
-				};
-			};
-		};
-
-		mdio@90000 {
-			status = "okay";
-			pinctrl-0 = <&mdio_pins>;
-			pinctrl-names = "default";
-			reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
-			reset-delay-us = <5000>;
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@194b000 {
-			/* select hostmode */
-			compatible = "qcom,tcsr";
-			reg = <0x194b000 0x100>;
-			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		i2c_0: i2c@78b7000 {
-			pinctrl-0 = <&i2c_0_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-
-		serial@78af000 {
-			pinctrl-0 = <&serial_0_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-
-		serial@78b0000 {
-			pinctrl-0 = <&serial_1_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-
-		usb3_ss_phy: ssphy@9a000 {
-			status = "okay";
-		};
-
-		usb3_hs_phy: hsphy@a6000 {
-			status = "okay";
-		};
-
-		usb3: usb3@8af8800 {
-			status = "okay";
-		};
-
-		usb2_hs_phy: hsphy@a8000 {
-			status = "okay";
-		};
-
-		usb2: usb2@60f8800 {
-			status = "okay";
-		};
-
-		cryptobam: dma@8e04000 {
-			status = "okay";
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			switch_lan_bmp = <0x1e>;
-			switch_wan_bmp = <0x20>;
-			status = "okay";
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-
-		qpic_bam: dma@7984000 {
-			status = "okay";
-		};
-
-		pcie0: pci@40000000 {
-			status = "okay";
-			perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
-			wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
-		};
-
-		nand: qpic-nand@79b0000 {
-			pinctrl-0 = <&nand_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-	};
-};
-
-&gmac0 {
-	qcom,phy_mdio_addr = <4>;
-	qcom,poll_required = <1>;
-	qcom,forced_speed = <1000>;
-	qcom,forced_duplex = <1>;
-	vlan_tag = <2 0x20>;
-};
-
-&gmac1 {
-	qcom,phy_mdio_addr = <3>;
-	qcom,poll_required = <1>;
-	qcom,forced_speed = <1000>;
-	qcom,forced_duplex = <1>;
-	vlan_tag = <1 0x10>;
-};
-
-&wifi0 {
-	status = "okay";
-};
-
-&wifi1 {
-	status = "okay";
-};
diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts
deleted file mode 100644
index 1bcf5e80bf..0000000000
--- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts
+++ /dev/null
@@ -1,288 +0,0 @@
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- * Copyright (c) 2017, Christian Mehlis <christian@m3hlis.de>
- * Copyright (c) 2017-2018, Sven Eckelmann <sven.eckelmann@openmesh.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "Compex WPJ428";
-	compatible = "compex,wpj428";
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-			pinctrl-0 = <&mdio_pins>;
-			pinctrl-names = "default";
-			reset-gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
-			reset-delay-us = <2000>;
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@194b000 {
-			/* select hostmode */
-			compatible = "qcom,tcsr";
-			reg = <0x194b000 0x100>;
-			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		usb2: usb2@60f8800 {
-			status = "okay";
-		};
-
-		usb3: usb3@8af8800 {
-			status = "okay";
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			switch_lan_bmp = <0x10>;
-			switch_wan_bmp = <0x20>;
-
-			status = "okay";
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	aliases {
-		led-boot = &status;
-		led-failsafe = &status;
-		led-upgrade = &status;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		status: rss4 {
-			label = "wpj428:green:rss4";
-			gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
-		};
-
-		rss3 {
-			label = "wpj428:green:rss3";
-			gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	beeper: beeper {
-		compatible = "gpio-beeper";
-		gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&tlmm {
-	mdio_pins: mdio_pinmux {
-		mux_1 {
-			pins = "gpio53";
-			function = "mdio";
-			bias-pull-up;
-		};
-
-		mux_2 {
-			pins = "gpio52";
-			function = "mdc";
-			bias-pull-up;
-		};
-	};
-
-	serial_pins: serial_pinmux {
-		mux {
-			pins = "gpio60", "gpio61";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	spi_0_pins: spi_0_pinmux {
-		pin {
-			function = "blsp_spi0";
-			pins = "gpio55", "gpio56", "gpio57";
-			drive-strength = <12>;
-			bias-disable;
-		};
-		pin_cs {
-			function = "gpio";
-			pins = "gpio54";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&blsp1_spi1 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
-	m25p80@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition0@0 {
-				label = "0:SBL1";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			partition1@40000 {
-				label = "0:MIBIB";
-				reg = <0x00040000 0x00020000>;
-				read-only;
-			};
-			partition2@60000 {
-				label = "0:QSEE";
-				reg = <0x00060000 0x00060000>;
-				read-only;
-			};
-			partition3@c0000 {
-				label = "0:CDT";
-				reg = <0x000c0000 0x00010000>;
-				read-only;
-			};
-			partition4@d0000 {
-				label = "0:DDRPARAMS";
-				reg = <0x000d0000 0x00010000>;
-				read-only;
-			};
-			partition5@e0000 {
-				label = "0:APPSBLENV"; /* uboot env*/
-				reg = <0x000e0000 0x00010000>;
-				read-only;
-			};
-			partition5@f0000 {
-				label = "0:APPSBL"; /* uboot */
-				reg = <0x000f0000 0x00080000>;
-				read-only;
-			};
-			partition5@170000 {
-				label = "0:ART";
-				reg = <0x00170000 0x00010000>;
-				read-only;
-			};
-			partition6@180000 {
-				compatible = "denx,fit";
-				label = "firmware";
-				reg = <0x00180000 0x01e80000>;
-			};
-		};
-	};
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&gmac0 {
-	qcom,phy_mdio_addr = <4>;
-	qcom,poll_required = <1>;
-	qcom,forced_speed = <1000>;
-	qcom,forced_duplex = <1>;
-	vlan_tag = <2 0x20>;
-};
-
-&gmac1 {
-	qcom,phy_mdio_addr = <3>;
-	qcom,poll_required = <1>;
-	qcom,forced_speed = <1000>;
-	qcom,forced_duplex = <1>;
-	vlan_tag = <1 0x10>;
-};
-
-&usb3_ss_phy {
-	status = "okay";
-};
-
-&usb3_hs_phy {
-	status = "okay";
-};
-
-&usb2_hs_phy {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-};
-
-&wifi1 {
-	status = "okay";
-};
diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-ap-303.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-ap-303.dts
deleted file mode 100644
index 126d944ebb..0000000000
--- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-ap-303.dts
+++ /dev/null
@@ -1,180 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-
-#include "qcom-ipq4029-aruba-glenmorangie.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Aruba AP-303";
-	compatible = "aruba,ap-303";
-
-	aliases {
-		led-boot = &led_system_green;
-		led-failsafe = &led_system_red;
-		led-running = &led_system_green;
-		led-upgrade = &led_system_red;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		wifi_green {
-			label = "ap-303:green:wifi";
-			gpios = <&tlmm 39 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "phy0tpt";
-		};
-
-		wifi_amber {
-			label = "ap-303:amber:wifi";
-			gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "phy1tpt";
-		};
-
-		led_system_red: system_red {
-			label = "ap-303:red:system";
-			gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
-		};
-
-		led_system_green: system_green {
-			label = "ap-303:green:system";
-			gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&tlmm {
-	/*
-	 * In addition to the Pins listed below,
-	 * the following GPIOs have "features":
-	 * 54 - out - active low to force HW reset
-	 * 41 - out - active low to reset TPM
-	 * 43 - out - active low to reset BLE radio
-	 * 19 - in  - active high when DC powered
-	 */
-
-	phy-reset {
-		line-name = "PHY-reset";
-		gpios = <42 GPIO_ACTIVE_HIGH>;
-		gpio-hog;
-		output-high;
-	};
-};
-
-&blsp1_spi1 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			/*
-			 * There is no partition map for the NOR flash
-			 * in the stock firmware.
-			 *
-			 * All partitions here are based on offsets
-			 * found in the U-Boot GPL code and information
-			 * from smem.
-			 */
-
-			partition@0 {
-				label = "sbl1";
-				reg = <0x0 0x40000>;
-				read-only;
-			};
-
-			partition@40000 {
-				label = "mibib";
-				reg = <0x40000 0x20000>;
-				read-only;
-			};
-
-			partition@60000 {
-				label = "qsee";
-				reg = <0x60000 0x60000>;
-				read-only;
-			};
-
-			partition@c0000 {
-				label = "cdt";
-				reg = <0xc0000 0x10000>;
-				read-only;
-			};
-
-			partition@d0000 {
-				label = "ddrparams";
-				reg = <0xd0000 0x10000>;
-				read-only;
-			};
-
-			partition@e0000 {
-				label = "ART";
-				reg = <0xe0000 0x10000>;
-				read-only;
-			};
-
-			partition@f0000 {
-				label = "appsbl";
-				reg = <0xf0000 0xf0000>;
-				read-only;
-			};
-
-			partition@1e0000 {
-				label = "mfginfo";
-				reg = <0x1e0000 0x10000>;
-				read-only;
-			};
-
-			partition@1f0000 {
-				label = "apcd";
-				reg = <0x1f0000 0x10000>;
-				read-only;
-			};
-
-			partition@200000 {
-				label = "osss";
-				reg = <0x200000 0x180000>;
-				read-only;
-			};
-
-			partition@380000 {
-				/* This is empty */
-				label = "appsblenv";
-				reg = <0x380000 0x10000>;
-				read-only;
-			};
-
-			partition@390000 {
-				label = "pds";
-				reg = <0x390000 0x10000>;
-				read-only;
-			};
-
-			partition@3a0000 {
-				label = "fcache";
-				reg = <0x3a0000 0x10000>;
-				read-only;
-			};
-
-			partition@3b0000 {
-				/* Called osss1 in smem */
-				label = "u-boot-env-bak";
-				reg = <0x3b0000 0x10000>;
-				read-only;
-			};
-
-			partition@3f0000 {
-				label = "u-boot-env";
-				reg = <0x3f0000 0x10000>;
-				read-only;
-			};
-		};
-	};
-};
diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts
deleted file mode 100644
index 1f7a728492..0000000000
--- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts
+++ /dev/null
@@ -1,421 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "Aruba AP-303H";
-	compatible = "aruba,ap-303h";
-
-	aliases {
-		led-boot = &led_system_green;
-		led-failsafe = &led_system_red;
-		led-running = &led_system_green;
-		led-upgrade = &led_system_amber;
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>;
-	};
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-			pinctrl-0 = <&mdio_pins>;
-			pinctrl-names = "default";
-
-			reset-gpios = <&tlmm 19 GPIO_ACTIVE_LOW>;
-			reset-delay-us = <2000>;
-		};
-
-		counter@4a1000 {
-			compatible = "qcom,qca-gcnt";
-			reg = <0x4a1000 0x4>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		tcsr@194b000 {
-			compatible = "qcom,tcsr";
-			reg = <0x194b000 0x100>;
-			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		usb2@60f8800 {
-			status = "okay";
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-
-		i2c_0: i2c@78b7000 {
-			pinctrl-0 = <&i2c_0_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-
-			tpm@29 {
-				/* No Driver */
-				compatible = "atmel,at97sc3203";
-				reg = <0x29>;
-				read-only;
-			};
-
-			power-monitor@40 {
-				/* No driver */
-				compatible = "isl,isl28022";
-				reg = <0x40>;
-		    };
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		wifi_green {
-			label = "ap-303h:green:wifi";
-			gpios = <&tlmm 27 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "phy0tpt";
-		};
-
-		wifi_amber {
-			label = "ap-303h:amber:wifi";
-			gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "phy1tpt";
-		};
-
-		pse {
-			label = "ap-303h:green:pse";
-			gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>;
-		};
-
-		led_system_red: system_red {
-			label = "ap-303h:red:system";
-			gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>;
-		};
-
-		led_system_green: system_green {
-			label = "ap-303h:green:system";
-			gpios = <&tlmm 24 GPIO_ACTIVE_HIGH>;
-		};
-
-		led_system_amber: system_amber {
-			label = "ap-303h:amber:system";
-			gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "Reset button";
-			gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&blsp1_uart2 {
-	/* Texas Instruments CC2540T BLE radio */
-	pinctrl-0 = <&serial_1_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&qpic_bam {
-	status = "okay";
-};
-
-&tlmm {
-	/*
-	 * In addition to the Pins listed below,
-	 * the following GPIOs have "features":
-	 * 39 - out - active low to force HW reset
-	 * 32 - out - active low to reset TPM
-	 * 43 - out - active low to reset BLE radio
-	 * 41 - out - pulse to set warm reset status
-	 * 34 - out - active low to enable PSE port
-	 * 22 - in  - active low when 802.3at powered
-	 * 29 - in  - active high when DC powered
-	 * 40 - in  - active low when reset due to cold HW reset
-	 * 30 - in  - active low when USB overcurrent detected
-	 * 35 - in  - interrupt line for power monitor chip
-	 * 31 - in  - active low when PSE port active
-	 */
-	mdio_pins: mdio_pinmux {
-		mux_1 {
-			pins = "gpio6";
-			function = "mdio";
-			bias-pull-up;
-		};
-		mux_2 {
-			pins = "gpio7";
-			function = "mdc";
-			bias-pull-up;
-		};
-	};
-
-	spi_0_pins: spi_0_pinmux {
-		pin {
-			function = "blsp_spi0";
-			pins = "gpio13", "gpio14", "gpio15";
-			drive-strength = <12>;
-			bias-disable;
-		};
-		pin_cs {
-			function = "gpio";
-			pins = "gpio12", "gpio59";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-
-	i2c_0_pins: i2c_0_pinmux {
-		mux {
-			pins = "gpio20", "gpio21";
-			function = "blsp_i2c0";
-			drive-strength = <4>;
-			bias-disable;
-		};
-	};
-
-	serial_0_pins: serial_0_pinmux {
-		mux {
-			pins = "gpio16", "gpio17";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	serial_1_pins: serial_1_pinmux {
-		mux {
-			pins = "gpio8", "gpio9";
-			function = "blsp_uart1";
-			bias-disable;
-		};
-	};
-
-	usb-power {
-		line-name = "USB-power";
-		gpios = <23 GPIO_ACTIVE_HIGH>;
-		gpio-hog;
-		output-high;
-	};
-};
-
-&blsp1_spi1 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>;
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			/*
-			 * There is no partition map for the NOR flash
-			 * in the stock firmware.
-			 *
-			 * All partitions here are based on offsets
-			 * found in the U-Boot GPL code and information
-			 * from smem.
-			 */
-
-			partition@0 {
-				label = "sbl1";
-				reg = <0x0 0x40000>;
-				read-only;
-			};
-
-			partition@40000 {
-				label = "mibib";
-				reg = <0x40000 0x20000>;
-				read-only;
-			};
-
-			partition@60000 {
-				label = "qsee";
-				reg = <0x60000 0x60000>;
-				read-only;
-			};
-
-			partition@c0000 {
-				label = "cdt";
-				reg = <0xc0000 0x10000>;
-				read-only;
-			};
-
-			partition@d0000 {
-				label = "ddrparams";
-				reg = <0xd0000 0x10000>;
-				read-only;
-			};
-
-			partition@e0000 {
-				label = "appsblenv";
-				reg = <0xe0000 0x10000>;
-				read-only;
-			};
-
-			partition@f0000 {
-				label = "appsbl";
-				reg = <0xf0000 0x100000>;
-				read-only;
-			};
-
-			partition@1e0000 {
-				label = "ART";
-				reg = <0x1f0000 0x10000>;
-				read-only;
-			};
-
-			partition@1f0000 {
-				label = "osss";
-				reg = <0x200000 0x170000>;
-				read-only;
-			};
-
-			partition@200000 {
-				label = "pds";
-				reg = <0x370000 0x10000>;
-				read-only;
-			};
-
-			partition@380000 {
-				label = "apcd";
-				reg = <0x380000 0x10000>;
-				read-only;
-			};
-
-			partition@390000 {
-				label = "mfginfo";
-				reg = <0x390000 0x10000>;
-				read-only;
-			};
-
-			partition@3a0000 {
-				label = "fcache";
-				reg = <0x3a0000 0x10000>;
-				read-only;
-			};
-
-			partition@3b0000 {
-				/* Called osss1 in smem */
-				label = "u-boot-env-bak";
-				reg = <0x3b0000 0x10000>;
-				read-only;
-			};
-
-			partition@3f0000 {
-				label = "u-boot-env";
-				reg = <0x3c0000 0x40000>;
-				read-only;
-			};
-		};
-	};
-
-	flash@1 {
-		status = "okay";
-
-		compatible = "spi-nand";
-		reg = <1>;
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				/* 'aos0' in Aruba firmware */
-				label = "aos0";
-				reg = <0x0 0x2000000>;
-				read-only;
-			};
-
-			partition@2000000 {
-				/* 'aos1' in Aruba firmware */
-				label = "ubi";
-				reg = <0x2000000 0x2000000>;
-			};
-
-			partition@4000000 {
-				label = "aruba-ubifs";
-				reg = <0x4000000 0x4000000>;
-				read-only;
-			};
-		};
-	};
-};
-
-&usb2_hs_phy {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "Aruba-AP-303";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "Aruba-AP-303";
-};
diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-ap-365.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-ap-365.dts
deleted file mode 100644
index 07bb674520..0000000000
--- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-ap-365.dts
+++ /dev/null
@@ -1,193 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-
-#include "qcom-ipq4029-aruba-glenmorangie.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Aruba AP-365";
-	compatible = "aruba,ap-365";
-
-	aliases {
-		led-boot = &led_system_green;
-		led-failsafe = &led_system_red;
-		led-running = &led_system_green;
-		led-upgrade = &led_system_red;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led_system_red: system_red {
-			label = "ap-365:red:system";
-			gpios = <&tlmm 46 GPIO_ACTIVE_LOW>;
-		};
-
-		led_system_green: system_green {
-			label = "ap-365:green:system";
-			gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
-		};
-
-		system_amber {
-			label = "ap-365:amber:system";
-			gpios = <&tlmm 49 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	watchdog {
-		compatible = "linux,wdt-gpio";
-		gpios = <&tlmm 41 GPIO_ACTIVE_LOW>;
-		hw_algo = "toggle";
-		hw_margin_ms = <1000>;
-		always-running;
-	};
-};
-
-&tlmm {
-	/*
-	 * In addition to the Pins listed below,
-	 * the following GPIOs have "features":
-	 * 39 - out - pulse low to reset watchdog status flipflop
-	 * 40 - out - active high to enable watchdog
-	 * 41 - out - watchdog poke
-	 * 42 - out - active low to reset BLE radio
-	 * 43 - out - active low to reset TPM
-	 * 47 - out - pulse low to reset warm reset status
-	 * 54 - out - active low to force HW reset
-	 * 18 - in  - PHY interrupt line
-	 * 45 - in  - power monitor interrupt
-	 * 48 - in  - active low when cold reset
-	 * 52 - in  - active high when watchdog reset
-	 */
-
-	phy-reset {
-		line-name = "PHY-reset";
-		gpios = <42 GPIO_ACTIVE_HIGH>;
-		gpio-hog;
-		output-high;
-	};
-};
-
-&i2c_0 {
-	power-monitor@40 {
-		/* No driver */
-		compatible = "isl,isl28022";
-		reg = <0x40>;
-	};
-
-	temperature-sensor@48 {
-		compatible = "adi,ad7416";
-		reg = <0x48>;
-	};
-};
-
-&blsp1_spi1 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			/*
-			 * There is no partition map for the NOR flash
-			 * in the stock firmware.
-			 *
-			 * All partitions here are based on offsets
-			 * found in the U-Boot GPL code and information
-			 * from smem.
-			 */
-
-			partition@0 {
-				label = "sbl1";
-				reg = <0x0 0x40000>;
-				read-only;
-			};
-
-			partition@40000 {
-				label = "mibib";
-				reg = <0x40000 0x20000>;
-				read-only;
-			};
-
-			partition@60000 {
-				label = "qsee";
-				reg = <0x60000 0x60000>;
-				read-only;
-			};
-
-			partition@c0000 {
-				label = "cdt";
-				reg = <0xc0000 0x10000>;
-				read-only;
-			};
-
-			partition@d0000 {
-				label = "ddrparams";
-				reg = <0xd0000 0x10000>;
-				read-only;
-			};
-
-			partition@e0000 {
-				label = "u-boot-env";
-				reg = <0xe0000 0x10000>;
-				read-only;
-			};
-
-			partition@f0000 {
-				label = "appsbl";
-				reg = <0xf0000 0x100000>;
-				read-only;
-			};
-
-			partition@1f0000 {
-				label = "ART";
-				reg = <0x1f0000 0x10000>;
-				read-only;
-			};
-
-			partition@200000 {
-				label = "osss";
-				reg = <0x200000 0x170000>;
-				read-only;
-			};
-
-			partition@370000 {
-				label = "pds";
-				reg = <0x370000 0x10000>;
-				read-only;
-			};
-
-			partition@380000 {
-				label = "apcd";
-				reg = <0x380000 0x10000>;
-				read-only;
-			};
-
-			partition@390000 {
-				label = "mfginfo";
-				reg = <0x390000 0x10000>;
-				read-only;
-			};
-
-			partition@3a0000 {
-				label = "fcache";
-				reg = <0x3a0000 0x10000>;
-				read-only;
-			};
-
-			partition@3b0000 {
-				label = "osss1";
-				reg = <0x3b0000 0x50000>;
-				read-only;
-			};
-		};
-	};
-};
diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi
deleted file mode 100644
index 4d1d82a272..0000000000
--- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi
+++ /dev/null
@@ -1,249 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>;
-	};
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-			pinctrl-0 = <&mdio_pins>;
-			pinctrl-names = "default";
-
-			/delete-node/ ethernet-phy@0;
-			/delete-node/ ethernet-phy@2;
-			/delete-node/ ethernet-phy@3;
-			/delete-node/ ethernet-phy@4;
-
-			ethernet-phy@5 {
-				reg = <0x5>;
-			};
-		};
-
-		counter@4a1000 {
-			compatible = "qcom,qca-gcnt";
-			reg = <0x4a1000 0x4>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII_RGMII5>;
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			switch_mac_mode = <0x3>; /* mac mode for RGMII RMII */
-			switch_lan_bmp = <0x0>; /* lan port bitmap */
-			switch_wan_bmp = <0x10>; /* wan port bitmap */
-		};
-
-		edma@c080000 {
-			qcom,single-phy;
-			qcom,num_gmac = <1>;
-			phy-mode = "rgmii-id";
-			status = "okay";
-		};
-
-		i2c_0: i2c@78b7000 {
-			pinctrl-0 = <&i2c_0_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-
-			tpm@29 {
-				/* No Driver */
-				compatible = "atmel,at97sc3203";
-				reg = <0x29>;
-				read-only;
-			};
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "Reset button";
-			gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&blsp1_uart1 {
-	/* Texas Instruments CC2540T BLE radio */
-	pinctrl-0 = <&serial_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&blsp1_uart2 {
-	pinctrl-0 = <&serial_1_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&gmac0 {
-	qcom,phy_mdio_addr = <5>;
-	qcom,poll_required = <1>;
-	vlan_tag = <0 0x20>;
-};
-
-&qpic_bam {
-	status = "okay";
-};
-
-&tlmm {
-	mdio_pins: mdio_pinmux {
-		mux_1 {
-			pins = "gpio6";
-			function = "mdio";
-			bias-pull-up;
-		};
-		mux_2 {
-			pins = "gpio7";
-			function = "mdc";
-			bias-pull-up;
-		};
-	};
-
-	nand_pins: nand_pins {
-		pullups {
-			pins = "gpio53", "gpio58", "gpio59";
-			function = "qpic";
-			bias-pull-up;
-		};
-
-		pulldowns {
-			pins = "gpio54", "gpio55", "gpio56",
-				"gpio57", "gpio60", "gpio61",
-				"gpio62", "gpio63", "gpio64",
-				"gpio65", "gpio66", "gpio67",
-				"gpio68", "gpio69";
-			function = "qpic";
-			bias-pull-down;
-		};
-	};
-
-	spi_0_pins: spi_0_pinmux {
-		pin {
-			function = "blsp_spi0";
-			pins = "gpio13", "gpio14", "gpio15";
-			drive-strength = <12>;
-			bias-disable;
-		};
-		pin_cs {
-			function = "gpio";
-			pins = "gpio12";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-
-	i2c_0_pins: i2c_0_pinmux {
-		mux {
-			pins = "gpio10", "gpio11";
-			function = "blsp_i2c0";
-			drive-strength = <4>;
-			bias-disable;
-		};
-	};
-
-	serial_0_pins: serial_0_pinmux {
-		mux {
-			pins = "gpio16", "gpio17";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	serial_1_pins: serial_1_pinmux {
-		mux {
-			pins = "gpio8", "gpio9";
-			function = "blsp_uart1";
-			bias-disable;
-		};
-	};
-};
-
-&nand {
-	pinctrl-0 = <&nand_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	nand@0 {
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				/* 'aos0' in Aruba firmware */
-				label = "aos0";
-				reg = <0x0 0x2000000>;
-				read-only;
-			};
-
-			partition@2000000 {
-				/* 'aos1' in Aruba firmware */
-				label = "ubi";
-				reg = <0x2000000 0x2000000>;
-			};
-
-			partition@4000000 {
-				label = "aruba-ubifs";
-				reg = <0x4000000 0x4000000>;
-				read-only;
-			};
-		};
-	};
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "Aruba-AP-303";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "Aruba-AP-303";
-};
diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts
deleted file mode 100644
index b32eb29f8c..0000000000
--- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts
+++ /dev/null
@@ -1,280 +0,0 @@
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "GL.iNet GL-B1300";
-	compatible = "glinet,gl-b1300";
-
-	aliases {
-		led-boot = &power;
-		led-failsafe = &power;
-		led-running = &power;
-		led-upgrade = &power;
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>;
-	};
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		tcsr@194b000 {
-			/* select hostmode */
-			compatible = "qcom,tcsr";
-			reg = <0x194b000 0x100>;
-			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-			status = "okay";
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		usb2@60f8800 {
-			status = "okay";
-		};
-
-		usb3@8af8800 {
-			status = "okay";
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-			switch_lan_bmp = <0x18>;
-			switch_wan_bmp = <0x20>;
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		wps {
-			label = "wps";
-			gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-
-		reset {
-			label = "reset";
-			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		power: power {
-			label = "gl-b1300:green:power";
-			gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-
-		mesh {
-			label = "gl-b1300:green:mesh";
-			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan {
-			label = "gl-b1300:green:wlan";
-			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&blsp1_spi1 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
-	mx25l25635f@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			SBL1@0 {
-				label = "SBL1";
-				reg = <0x0 0x40000>;
-				read-only;
-			};
-
-			MIBIB@40000 {
-				label = "MIBIB";
-				reg = <0x40000 0x20000>;
-				read-only;
-			};
-
-			QSEE@60000 {
-				label = "QSEE";
-				reg = <0x60000 0x60000>;
-				read-only;
-			};
-
-			CDT@c0000 {
-				label = "CDT";
-				reg = <0xc0000 0x10000>;
-				read-only;
-			};
-
-			DDRPARAMS@d0000 {
-				label = "DDRPARAMS";
-				reg = <0xd0000 0x10000>;
-				read-only;
-			};
-
-			APPSBLENV@e0000 {
-				label = "APPSBLENV";
-				reg = <0xe0000 0x10000>;
-				read-only;
-			};
-
-			APPSBL@f0000 {
-				label = "APPSBL";
-				reg = <0xf0000 0x80000>;
-				read-only;
-			};
-
-			ART@170000 {
-				label = "ART";
-				reg = <0x170000 0x10000>;
-				read-only;
-			};
-
-			firmware@180000 {
-				compatible = "denx,fit";
-				label = "firmware";
-				reg = <0x180000 0x1e80000>;
-			};
-		};
-	};
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&tlmm {
-	serial_pins: serial_pinmux {
-		mux {
-			pins = "gpio60", "gpio61";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	spi_0_pins: spi_0_pinmux {
-		pinmux {
-			function = "blsp_spi0";
-			pins = "gpio55", "gpio56", "gpio57";
-		};
-		pinmux_cs {
-			function = "gpio";
-			pins = "gpio54";
-		};
-		pinconf {
-			pins = "gpio55", "gpio56", "gpio57";
-			drive-strength = <12>;
-			bias-disable;
-		};
-		pinconf_cs {
-			pins = "gpio54";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-};
-
-&usb2_hs_phy {
-	status = "okay";
-};
-
-&usb3_hs_phy {
-	status = "okay";
-};
-
-&usb3_ss_phy {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "GL-B1300";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "GL-B1300";
-};
diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-mr33.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-mr33.dts
deleted file mode 100644
index 5003572420..0000000000
--- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-mr33.dts
+++ /dev/null
@@ -1,400 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for Meraki MR33 (Stinkbug)
- *
- * Copyright (C) 2017 Chris Blake <chrisrblake93@gmail.com>
- * Copyright (C) 2017 Christian Lamparter <chunkeey@googlemail.com>
- *
- * Based on Cisco Meraki DTS from GPL release r25-linux-3.14-20170427
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	model = "Meraki MR33 Access Point";
-	compatible = "meraki,mr33";
-
-	aliases {
-		led-boot = &status_green;
-		led-failsafe = &status_red;
-		led-running = &status_green;
-		led-upgrade = &power_orange;
-	};
-
-	/* Do we really need this defined? */
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>;
-	};
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-			pinctrl-0 = <&mdio_pins>;
-			pinctrl-names = "default";
-		};
-
-		/* It is a 56-bit counter that supplies the count to the ARM arch
-		   timers and without upstream driver */
-		counter@4a1000 {
-			compatible = "qcom,qca-gcnt";
-			reg = <0x4a1000 0x4>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII_RGMII5>;
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		serial@78b0000 {
-			pinctrl-0 = <&serial_1_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-
-			bluetooth {
-				compatible = "ti,cc2650";
-				enable-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
-			};
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			switch_mac_mode = <0x3>; /* mac mode for RGMII RMII */
-			switch_lan_bmp = <0x0>; /* lan port bitmap */
-			switch_wan_bmp = <0x10>; /* wan port bitmap */
-		};
-
-		edma@c080000 {
-			qcom,single-phy;
-			qcom,num_gmac = <1>;
-			phy-mode = "rgmii-rxid";
-			status = "okay";
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		power_orange: power {
-			label = "mr33:orange:power";
-			gpios = <&tlmm 49 GPIO_ACTIVE_LOW>;
-			panic-indicator;
-		};
-	};
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&gmac0 {
-	qcom,phy_mdio_addr = <1>;
-	qcom,poll_required = <1>;
-	vlan_tag = <0 0x20>;
-};
-
-&blsp1_i2c3 {
-	pinctrl-0 = <&i2c_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	at24@50 {
-		compatible = "atmel,24c64";
-		pagesize = <32>;
-		reg = <0x50>;
-		read-only; /* This holds our MAC & Meraki board-data */
-	};
-};
-
-&blsp1_i2c4 {
-	pinctrl-0 = <&i2c_1_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	led-controller@30 {
-		compatible = "ti,lp5562";
-		reg = <0x30>;
-		clock-mode = /bits/8 <2>;
-		enable-gpio = <&tlmm 48 GPIO_ACTIVE_HIGH>;
-
-		/* RGB led */
-		status_red: chan0 {
-			chan-name = "mr33:red:status";
-			led-cur = /bits/ 8 <0x20>;
-			max-cur = /bits/ 8 <0x60>;
-		};
-
-		status_green: chan1 {
-			chan-name = "mr33:green:status";
-			led-cur = /bits/ 8 <0x20>;
-			max-cur = /bits/ 8 <0x60>;
-		};
-
-		chan2 {
-			chan-name = "mr33:blue:status";
-			led-cur = /bits/ 8 <0x20>;
-			max-cur = /bits/ 8 <0x60>;
-		};
-
-		chan3 {
-			chan-name = "mr33:white:status";
-			led-cur = /bits/ 8 <0x20>;
-			max-cur = /bits/ 8 <0x60>;
-		};
-	};
-};
-
-&nand {
-	pinctrl-0 = <&nand_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	nand@0 {
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "sbl1";
-				reg = <0x00000000 0x00100000>;
-				read-only;
-			};
-			partition@100000 {
-				label = "mibib";
-				reg = <0x00100000 0x00100000>;
-				read-only;
-			};
-			partition@200000 {
-				label = "bootconfig";
-				reg = <0x00200000 0x00100000>;
-				read-only;
-			};
-			partition@300000 {
-				label = "qsee";
-				reg = <0x00300000 0x00100000>;
-				read-only;
-			};
-			partition@400000 {
-				label = "qsee_alt";
-				reg = <0x00400000 0x00100000>;
-				read-only;
-			};
-			partition@500000 {
-				label = "cdt";
-				reg = <0x00500000 0x00080000>;
-				read-only;
-			};
-			partition@580000 {
-				label = "cdt_alt";
-				reg = <0x00580000 0x00080000>;
-				read-only;
-			};
-			partition@600000 {
-				label = "ddrparams";
-				reg = <0x00600000 0x00080000>;
-				read-only;
-			};
-			partition@700000 {
-				label = "u-boot";
-				reg = <0x00700000 0x00200000>;
-				read-only;
-			};
-			partition@900000 {
-				label = "u-boot-backup";
-				reg = <0x00900000 0x00200000>;
-				read-only;
-			};
-			partition@b00000 {
-				label = "ART";
-				reg = <0x00b00000 0x00080000>;
-				read-only;
-			};
-			partition@c00000 {
-				label = "ubi";
-				reg = <0x00c00000 0x07000000>;
-				/*
-				 * Do not try to allocate the remaining
-				 * 4 MiB to this ubi partition. It will
-				 * confuse the u-boot and it might not
-				 * find the kernel partition anymore.
-				 */
-			};
-		};
-	};
-};
-
-&pcie0 {
-	status = "okay";
-	perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
-	wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
-
-	bridge@0,0 {
-		reg = <0x00000000 0 0 0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
-		wifi2: wifi@1,0 {
-			compatible = "qcom,ath10k";
-			status = "okay";
-			reg = <0x00010000 0 0 0 0>;
-		};
-	};
-};
-
-&qpic_bam {
-	status = "okay";
-};
-
-&tlmm {
-	/*
-	 * GPIO43 should be 0/1 whenever the unit is
-	 * powered through PoE or AC-Adapter.
-	 * That said, playing with this seems to
-	 * reset the AP.
-	 */
-
-	mdio_pins: mdio_pinmux {
-		mux_1 {
-			pins = "gpio6";
-			function = "mdio";
-			bias-pull-up;
-		};
-		mux_2 {
-			pins = "gpio7";
-			function = "mdc";
-			bias-pull-up;
-		};
-	};
-
-	serial_0_pins: serial_pinmux {
-		mux {
-			pins = "gpio16", "gpio17";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	serial_1_pins: serial1_pinmux {
-		mux {
-			/* We use the i2c-0 pins for serial_1 */
-			pins = "gpio8", "gpio9";
-			function = "blsp_uart1";
-			bias-disable;
-		};
-	};
-
-	i2c_0_pins: i2c_0_pinmux {
-		pinmux {
-			function = "blsp_i2c0";
-			pins = "gpio20", "gpio21";
-		};
-		pinconf {
-			pins = "gpio20", "gpio21";
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-
-	i2c_1_pins: i2c_1_pinmux {
-		pinmux {
-			function = "blsp_i2c1";
-			pins = "gpio34", "gpio35";
-		};
-		pinconf {
-			pins = "gpio34", "gpio35";
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-
-	nand_pins: nand_pins {
-		/*
-		 * There are 18 pins. 15 pins are common between LCD and NAND.
-		 * The QPIC controller arbitrates between LCD and NAND. Of the
-		 * remaining 4, 2 are for NAND and 2 are for LCD exclusively.
-		 *
-		 * The meraki source hints that the bluetooth module claims
-		 * pin 52 as well. But sadly, there's no data whenever this
-		 * is a NAND or LCD exclusive pin or not.
-		 */
-
-		pullups {
-			pins = "gpio52", "gpio53", "gpio58",
-				"gpio59";
-			function = "qpic";
-			bias-pull-up;
-		};
-
-		pulldowns {
-			pins = "gpio54", "gpio55", "gpio56",
-				"gpio57", "gpio60", "gpio61",
-				"gpio62", "gpio63", "gpio64",
-				"gpio65", "gpio66", "gpio67",
-				"gpio68", "gpio69";
-			function = "qpic";
-			bias-pull-down;
-		};
-	};
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "Meraki-MR33";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "Meraki-MR33";
-};
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-a42.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-a42.dts
index 33c44a8097..33c44a8097 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-a42.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-a42.dts
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
index e21c40cae0..e21c40cae0 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-cs-w3-wd1200g-eup.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-cs-w3-wd1200g-eup.dts
index d8b9e7ef13..d8b9e7ef13 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-cs-w3-wd1200g-eup.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-cs-w3-wd1200g-eup.dts
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts
index 17d9215544..17d9215544 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts
index 2f9a890485..2f9a890485 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts
index 32fded4c0e..32fded4c0e 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-emd1.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emd1.dts
index cf4f793f21..cf4f793f21 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-emd1.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emd1.dts
diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-emr3500.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emr3500.dts
index 50067aaa91..50067aaa91 100644
--- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-emr3500.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emr3500.dts
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ens620ext.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ens620ext.dts
index 8636b18b2e..8636b18b2e 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ens620ext.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ens620ext.dts
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ex6100v2.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ex6100v2.dts
index 2b93dcbb99..2b93dcbb99 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ex6100v2.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ex6100v2.dts
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ex6150v2.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ex6150v2.dts
index f1c44c1ae8..f1c44c1ae8 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ex6150v2.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ex6150v2.dts
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi
index cc70080c92..cc70080c92 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts
index b2a32946d9..b2a32946d9 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts
index 988b86b68d..988b86b68d 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dtsi
index 3af6de1f60..3af6de1f60 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dtsi
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-meshpoint-one.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-meshpoint-one.dts
index 2e21b55325..2e21b55325 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-meshpoint-one.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-meshpoint-one.dts
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts
index a8c144f928..a8c144f928 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts
index a0030f77ce..a0030f77ce 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts
index 5932638da0..5932638da0 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-a62.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-a62.dts
index 25bbd6b332..25bbd6b332 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-a62.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-a62.dts
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
index 47202d28fe..47202d28fe 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
index 9801354625..9801354625 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-cm520-79f.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-cm520-79f.dts
index f4c1685f47..f4c1685f47 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-cm520-79f.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-cm520-79f.dts
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c1.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c1.dts
index df1df2529a..df1df2529a 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c1.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c1.dts
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c2.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c2.dts
index 9348ef4eec..9348ef4eec 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c2.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c2.dts
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-e2600ac.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-e2600ac.dtsi
index f4af2ba25f..f4af2ba25f 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-e2600ac.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-e2600ac.dtsi
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-ea8300.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-ea8300.dts
index cfc3037fb2..cfc3037fb2 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-ea8300.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-ea8300.dts
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-eap2200.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-eap2200.dts
index ec3ce447cc..ec3ce447cc 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-eap2200.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-eap2200.dts
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts
index b04a61dc04..b04a61dc04 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts
index e9b96b996a..e9b96b996a 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts
index 6914917eb3..6914917eb3 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts
index 8fe7644a9b..8fe7644a9b 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts
index a063f8e952..a063f8e952 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-rtl30vw.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-rtl30vw.dts
index 2f17424e55..2f17424e55 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-rtl30vw.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-rtl30vw.dts
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-u4019-32m.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-u4019-32m.dts
index 63fbfb65c1..63fbfb65c1 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-u4019-32m.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-u4019-32m.dts
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-u4019.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-u4019.dtsi
index c768e25ca0..c768e25ca0 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-u4019.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-u4019.dtsi
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts
index 3a0e0b8cfa..3a0e0b8cfa 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts
index 1bcf5e80bf..1bcf5e80bf 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-ap-303.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-303.dts
index 126d944ebb..126d944ebb 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-ap-303.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-303.dts
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts
index 1f7a728492..1f7a728492 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-ap-365.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-365.dts
index 07bb674520..07bb674520 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-ap-365.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-365.dts
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi
index 4d1d82a272..4d1d82a272 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts
index b32eb29f8c..b32eb29f8c 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-mr33.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-mr33.dts
index 5003572420..5003572420 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-mr33.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-mr33.dts